From: "gwenhael.goavec" <gwenhael.goavec-merou@armadeus.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox <barebox@lists.infradead.org>
Subject: Re: [PATCH] [ARM] imx1: add #define to configure frequency for the clk32
Date: Mon, 25 Mar 2013 12:14:34 +0100 [thread overview]
Message-ID: <20130325121434.2f343c06@dell.trabucayre.com> (raw)
In-Reply-To: <20130315151312.GG1906@pengutronix.de>
Hi,
What do you mean by "first user" ?
Gwenhael
On Fri, 15 Mar 2013 16:13:12 +0100
Sascha Hauer <s.hauer@pengutronix.de> wrote:
> On Wed, Mar 13, 2013 at 09:58:58AM +0100, Gwenhael Goavec-Merou wrote:
> > From: gwenhael <gwenhael.goavec-merou@armadeus.com>
> >
> > i.MX1 allows to use a 32kHz or a 32.768kHz quartz for the 32kHz clock source
> > (MC9328MXLRM p.177).
> > This patch adds the ability for the developer to change the default value for
> > the 32kHz clock source.
>
> Ok, I see we have to do something here as there are systems out there
> which have different clock frequencies. This also happens on other i.MX
> SoCs.
>
> I don't really like the solution, although I can't currently think of a
> better one (at least not as long devicetrees are not available
> everywhere). Using board specific defines which propagate to generic
> drivers is not a very good design. However, is it ok for you when we
> apply it along with the first user? This way we do not have this dead
> define in the code.
>
> Sascha
>
>
> >
> > Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
> > ---
> > arch/arm/mach-imx/clk-imx1.c | 6 +++++-
> > 1 file changed, 5 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
> > index 0d04a92..b779ab2 100644
> > --- a/arch/arm/mach-imx/clk-imx1.c
> > +++ b/arch/arm/mach-imx/clk-imx1.c
> > @@ -26,6 +26,10 @@
> >
> > #include "clk.h"
> >
> > +#ifndef MX1_CLK32_FREQ
> > +#define MX1_CLK32_FREQ 32000
> > +#endif
> > +
> > #define CCM_CSCR 0x0
> > #define CCM_MPCTL0 0x4
> > #define CCM_SPCTL0 0xc
> > @@ -91,7 +95,7 @@ static int imx1_ccm_probe(struct device_d *dev)
> >
> > regs = dev_request_mem_region(dev, 0);
> >
> > - mx1_clocks_init(regs, 32000);
> > + mx1_clocks_init(regs, MX1_CLK32_FREQ);
> >
> > return 0;
> > }
> > --
> > 1.7.10.4
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> >
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-03-25 11:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-13 8:58 Gwenhael Goavec-Merou
2013-03-15 15:13 ` Sascha Hauer
2013-03-25 11:14 ` gwenhael.goavec [this message]
2013-03-25 12:43 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130325121434.2f343c06@dell.trabucayre.com \
--to=gwenhael.goavec-merou@armadeus.com \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox