mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Alexander Aring <alex.aring@gmail.com>
To: "Teresa Gámez" <t.gamez@phytec.de>
Cc: barebox@lists.infradead.org
Subject: Re: [RFC PATCH 2/2] OMAP: Add option to use enviroment from MMC
Date: Tue, 26 Mar 2013 21:17:14 +0100	[thread overview]
Message-ID: <20130326201713.GA3564@x61s.Speedport_W_921V_1_21_000> (raw)
In-Reply-To: <1364307796-2407-2-git-send-email-t.gamez@phytec.de>

Hi,

On Tue, Mar 26, 2013 at 03:23:16PM +0100, Teresa Gámez wrote:
> Make loading enviroment from MMC generic for all OMAP.
> 
> Tested on AM335x, OMAP4.
>
> Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
> Tested-by: Jan Weitzel <j.weitzel@phytec.de>
> ---
>  arch/arm/boards/panda/board.c             |   30 ---------------------------
>  arch/arm/mach-omap/include/mach/generic.h |    1 +
>  arch/arm/mach-omap/omap_generic.c         |   32 +++++++++++++++++++++++++++++
>  3 files changed, 33 insertions(+), 30 deletions(-)
> 
> diff --git a/arch/arm/boards/panda/board.c b/arch/arm/boards/panda/board.c
> index 2518d3a..d1f9a5e 100644
> --- a/arch/arm/boards/panda/board.c
> +++ b/arch/arm/boards/panda/board.c
> @@ -1,12 +1,10 @@
>  #include <common.h>
>  #include <console.h>
>  #include <init.h>
> -#include <fs.h>
>  #include <driver.h>
>  #include <io.h>
>  #include <ns16550.h>
>  #include <asm/armlinux.h>
> -#include <linux/stat.h>
>  #include <generated/mach-types.h>
>  #include <mach/omap4-silicon.h>
>  #include <mach/omap4-devices.h>
> @@ -20,7 +18,6 @@
>  #include <asm/mmu.h>
>  #include <mach/gpio.h>
>  #include <envfs.h>
> -#include <mach/generic.h>
>  #include <i2c/i2c.h>
>  #include <gpio.h>
>  #include <led.h>
> @@ -164,30 +161,3 @@ static int panda_devices_init(void)
>  	return 0;
>  }
>  device_initcall(panda_devices_init);
> -
> -#ifdef CONFIG_DEFAULT_ENVIRONMENT
> -static int panda_env_init(void)
> -{
> -	struct stat s;
> -	char *diskdev = "/dev/disk0.0";
> -	int ret;
> -
> -	ret = stat(diskdev, &s);
> -	if (ret) {
> -		printf("no %s. using default env\n", diskdev);
> -		return 0;
> -	}
> -
> -	mkdir ("/boot", 0666);
> -	ret = mount(diskdev, "fat", "/boot");
> -	if (ret) {
> -		printf("failed to mount %s\n", diskdev);
> -		return 0;
> -	}
> -
> -	default_environment_path = "/boot/bareboxenv";
> -
> -	return 0;
> -}
> -late_initcall(panda_env_init);
> -#endif

There is a second env_init in beaglebone:

late_initcall(beaglebone_env_init); in 
arch/arm/boards/beaglebone/board.c

I think you need to remove this too. Otherwise this will be called twice.

> diff --git a/arch/arm/mach-omap/include/mach/generic.h b/arch/arm/mach-omap/include/mach/generic.h
> index edc4f1d..7455404 100644
> --- a/arch/arm/mach-omap/include/mach/generic.h
> +++ b/arch/arm/mach-omap/include/mach/generic.h
> @@ -35,6 +35,7 @@ enum omap_boot_src {
>  	OMAP_BOOTSRC_USB1,
>  };
>  
> +enum omap_boot_src omap_bootsrc(void);
>  enum omap_boot_src am33xx_bootsrc(void);
>  enum omap_boot_src omap3_bootsrc(void);
>  enum omap_boot_src omap4_bootsrc(void);
> diff --git a/arch/arm/mach-omap/omap_generic.c b/arch/arm/mach-omap/omap_generic.c
> index f2fd1d3..5882794 100644
> --- a/arch/arm/mach-omap/omap_generic.c
> +++ b/arch/arm/mach-omap/omap_generic.c
> @@ -30,3 +30,35 @@ enum omap_boot_src omap_bootsrc(void)
>  	return am33xx_bootsrc();
>  #endif
>  }
> +
> +#if defined(CONFIG_DEFAULT_ENVIRONMENT) && defined(CONFIG_MCI_STARTUP)
> +static int omap_env_init(void)
> +{
> +	struct stat s;
> +	char *diskdev = "/dev/disk0.0";
> +	int ret;
> +
> +	if (omap_bootsrc() != OMAP_BOOTSRC_MMC1)
> +		return 0;
> +
> +	ret = stat(diskdev, &s);
> +	if (ret) {
> +		printf("no %s. using default env\n", diskdev);
> +		return 0;
> +	}
> +
> +	mkdir("/boot", 0666);
> +	ret = mount(diskdev, "fat", "/boot");
> +	if (ret) {
> +		printf("failed to mount %s\n", diskdev);
> +		return 0;
> +	}
> +
> +	printf("Loading enviroment from MMC\n");

s/enviroment/environment
> +
> +	default_environment_path = "/boot/bareboxenv";
> +
> +	return 0;
> +}
> +late_initcall(omap_env_init);
> +#endif

The part in beaglebone/board.c checks for build in environment:
IS_ENABLED(CONFIG_OMAP_BUILD_IFT)

Maybe you can add this here, too. But remember to disable
CONFIG_OMAP_BUILD_IFT to use a mmc environment.

But maybe you can drop this here, because you check on
CONFIG_MCI_STARTUP.

Alex

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2013-03-26 20:15 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-26 14:23 [RFC PATCH 1/2] OMAP: Move bootsource functions Teresa Gámez
2013-03-26 14:23 ` [RFC PATCH 2/2] OMAP: Add option to use enviroment from MMC Teresa Gámez
2013-03-26 20:17   ` Alexander Aring [this message]
2013-03-27  8:10     ` Teresa Gamez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130326201713.GA3564@x61s.Speedport_W_921V_1_21_000 \
    --to=alex.aring@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=t.gamez@phytec.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox