From: Sascha Hauer <s.hauer@pengutronix.de>
To: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v4 0/5] ARM: add support for Zynq
Date: Wed, 27 Mar 2013 09:32:58 +0100 [thread overview]
Message-ID: <20130327083258.GQ1906@pengutronix.de> (raw)
In-Reply-To: <1364289086-2241-1-git-send-email-s.trumtrar@pengutronix.de>
On Tue, Mar 26, 2013 at 10:11:21AM +0100, Steffen Trumtrar wrote:
> Hi!
>
> This is mostly a repost of v3. Only changes are in 4/5.
> The final image now gets always piped through zynq_mkimage. This is needed
> anyway, so do it always.
> This tool will eventually replace all the flash_header linker stuff, although
> it is pretty simple on the Zynq.
>
> Regards,
> Steffen
>
> Steffen Trumtrar (5):
> serial: Add driver for Cadence UART
> ARM: zynq: Add new architecture zynq
> ARM: zynq: add clk support for zynq7000
> ARM: zynq: add zynq fsbl checksum script
> ARM: zynq: Add support for the Avnet Zedboard
Applied, thanks.
The version numbers get lost while applying anyway, so I hope this won't
be an issue.
Sascha
>
> .gitignore | 1 +
> arch/arm/Kconfig | 5 +
> arch/arm/Makefile | 10 +
> arch/arm/boards/avnet-zedboard/Makefile | 3 +
> arch/arm/boards/avnet-zedboard/board.c | 38 ++
> arch/arm/boards/avnet-zedboard/config.h | 4 +
> .../boards/avnet-zedboard/env/init/config-board | 7 +
> arch/arm/boards/avnet-zedboard/flash_header.c | 62 +++
> arch/arm/boards/avnet-zedboard/lowlevel.c | 252 +++++++++++++
> arch/arm/configs/zedboard_defconfig | 49 +++
> arch/arm/mach-zynq/Kconfig | 38 ++
> arch/arm/mach-zynq/Makefile | 1 +
> arch/arm/mach-zynq/clk-zynq7000.c | 417 +++++++++++++++++++++
> arch/arm/mach-zynq/devices.c | 8 +
> arch/arm/mach-zynq/include/mach/barebox.lds.h | 8 +
> arch/arm/mach-zynq/include/mach/clkdev.h | 6 +
> arch/arm/mach-zynq/include/mach/debug_ll.h | 37 ++
> arch/arm/mach-zynq/include/mach/devices.h | 13 +
> .../arm/mach-zynq/include/mach/zynq-flash-header.h | 38 ++
> arch/arm/mach-zynq/include/mach/zynq7000-regs.h | 132 +++++++
> arch/arm/mach-zynq/zynq.c | 56 +++
> drivers/serial/Kconfig | 5 +
> drivers/serial/Makefile | 1 +
> drivers/serial/serial_cadence.c | 307 +++++++++++++++
> include/asm-generic/barebox.lds.h | 3 +-
> scripts/.gitignore | 1 +
> scripts/Makefile | 1 +
> scripts/zynq_mkimage.c | 86 +++++
> 28 files changed, 1588 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boards/avnet-zedboard/Makefile
> create mode 100644 arch/arm/boards/avnet-zedboard/board.c
> create mode 100644 arch/arm/boards/avnet-zedboard/config.h
> create mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board
> create mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c
> create mode 100644 arch/arm/boards/avnet-zedboard/lowlevel.c
> create mode 100644 arch/arm/configs/zedboard_defconfig
> create mode 100644 arch/arm/mach-zynq/Kconfig
> create mode 100644 arch/arm/mach-zynq/Makefile
> create mode 100644 arch/arm/mach-zynq/clk-zynq7000.c
> create mode 100644 arch/arm/mach-zynq/devices.c
> create mode 100644 arch/arm/mach-zynq/include/mach/barebox.lds.h
> create mode 100644 arch/arm/mach-zynq/include/mach/clkdev.h
> create mode 100644 arch/arm/mach-zynq/include/mach/debug_ll.h
> create mode 100644 arch/arm/mach-zynq/include/mach/devices.h
> create mode 100644 arch/arm/mach-zynq/include/mach/zynq-flash-header.h
> create mode 100644 arch/arm/mach-zynq/include/mach/zynq7000-regs.h
> create mode 100644 arch/arm/mach-zynq/zynq.c
> create mode 100644 drivers/serial/serial_cadence.c
> create mode 100644 scripts/zynq_mkimage.c
>
> --
> 1.8.2.rc2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2013-03-27 8:33 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-26 9:11 Steffen Trumtrar
2013-03-26 9:11 ` [PATCH v3 1/5] serial: Add driver for Cadence UART Steffen Trumtrar
2013-03-26 9:11 ` [PATCH v3 2/5] ARM: zynq: Add new architecture zynq Steffen Trumtrar
2013-03-26 13:19 ` Josh Cartwright
2013-03-26 13:28 ` Steffen Trumtrar
2013-03-26 9:11 ` [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000 Steffen Trumtrar
2013-03-26 13:20 ` Josh Cartwright
2013-03-26 13:25 ` Josh Cartwright
2013-03-26 14:20 ` Michal Simek
2013-03-26 9:11 ` [PATCH v3 4/5] ARM: zynq: add zynq fsbl checksum script Steffen Trumtrar
2013-03-26 9:11 ` [PATCH v3 5/5] ARM: zynq: Add support for the Avnet Zedboard Steffen Trumtrar
2013-03-26 9:21 ` [PATCH v4 0/5] ARM: add support for Zynq Michal Simek
2013-03-26 9:33 ` Steffen Trumtrar
2013-03-26 9:38 ` Michal Simek
2013-03-26 10:22 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-27 8:32 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130327083258.GQ1906@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=s.trumtrar@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox