From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Krzysztof Halasa <khc@pm.waw.pl>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] ARM: Support for IXP4xx CPU.
Date: Mon, 8 Apr 2013 09:27:08 +0200 [thread overview]
Message-ID: <20130408072708.GT1568@game.jcrosoft.org> (raw)
In-Reply-To: <m3obdq15hr.fsf_-_@intrepid.localdomain>
On 21:54 Sun 07 Apr , Krzysztof Halasa wrote:
> Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index bb9b47b..2a775d5 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -79,6 +79,12 @@ config ARCH_IMX
> select WATCHDOG_IMX_RESET_SOURCE
> select HAS_DEBUG_LL
>
> +config ARCH_IXP4XX
> + bool "Intel IXP4xx-based"
> + select CPU_XSCALE
> + select ARCH_SUPPORTS_BIG_ENDIAN
> + select CPU_BIG_ENDIAN
> +
> config ARCH_MXS
> bool "Freescale i.MX23/28 (mxs) based"
> select GENERIC_GPIO
> @@ -153,6 +159,7 @@ source arch/arm/mach-clps711x/Kconfig
> source arch/arm/mach-ep93xx/Kconfig
> source arch/arm/mach-highbank/Kconfig
> source arch/arm/mach-imx/Kconfig
> +source arch/arm/mach-ixp4xx/Kconfig
> source arch/arm/mach-mxs/Kconfig
> source arch/arm/mach-netx/Kconfig
> source arch/arm/mach-nomadik/Kconfig
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index d506b12..584d39b 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -57,6 +57,7 @@ machine-$(CONFIG_ARCH_CLPS711X) := clps711x
> machine-$(CONFIG_ARCH_EP93XX) := ep93xx
> machine-$(CONFIG_ARCH_HIGHBANK) := highbank
> machine-$(CONFIG_ARCH_IMX) := imx
> +machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
> machine-$(CONFIG_ARCH_MXS) := mxs
> machine-$(CONFIG_ARCH_NOMADIK) := nomadik
> machine-$(CONFIG_ARCH_NETX) := netx
> diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
> new file mode 100644
> index 0000000..e69de29
> diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
> new file mode 100644
> index 0000000..d8a3d7f
> --- /dev/null
> +++ b/arch/arm/mach-ixp4xx/Makefile
> @@ -0,0 +1 @@
> +obj-y += generic.o
> diff --git a/arch/arm/mach-ixp4xx/generic.c b/arch/arm/mach-ixp4xx/generic.c
> new file mode 100644
> index 0000000..e81994b
> --- /dev/null
> +++ b/arch/arm/mach-ixp4xx/generic.c
> @@ -0,0 +1,114 @@
> +#include <common.h>
> +#include <init.h>
> +#include <ns16550.h>
> +#include <asm/armlinux.h>
> +#include <asm/io.h>
> +#include <mach/ixp4xx-regs.h>
> +
> +#define OSTS_FREQUENCY 66666000
> +
> +void reset_cpu(ulong addr)
> +{
> + /* Use on-chip reset capability */
> + /* This may not work on IXP425 rev. A0 */
> +
> + IXP4XX_OSWK = IXP4XX_WDT_KEY;
> + IXP4XX_OSWT = 0; /* request immediate reset */
> + IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
> + while (1)
> + ;
> +}
> +
> +#include <clock.h>
> +
> +/**
> + * @brief Provide a simple clock read
> + *
> + * Nothing is simpler.. read direct from clock and provide it
> + * to the caller.
> + *
> + * @return clock counter
> + */
> +static uint64_t ixp4xx_clocksource_read(void)
> +{
> + return IXP4XX_OSTS;
> +}
> +
> +static struct clocksource cs = {
> + .read = ixp4xx_clocksource_read,
> + .mask = 0xffffffff,
use CLOCKSOURCE_MASK(32),
> + .shift = 10,
> +};
> +
> +/**
> + * @brief Initialize the Clock
> + *
> + * We use the Time-Stamp Timer
> + *
> + * @return result of @ref init_clock
> + */
> +static int ixp4xx_clocksource_init(void)
> +{
> + cs.mult = clocksource_hz2mult(OSTS_FREQUENCY, cs.shift);
> +
> + return init_clock(&cs);
> +}
> +
> +/* Run me at boot time */
> +core_initcall(ixp4xx_clocksource_init);
> +
> +
> +#ifdef CONFIG_DRIVER_SERIAL_NS16550
> +
> +/**
> + * @brief UART port register read function for IXP4XX
> + *
> + * @param base base address of UART
> + * @param reg_idx register index
> + *
> + * @return character read from register
> + */
> +unsigned int ixp4xx_uart_read(unsigned long base, unsigned char reg_idx)
> +{
> + return readb(4 * reg_idx + 3 /* big-endian */ + (uint8_t *)base);
drop the 4 and use shift = 2 in pdata
> +}
> +EXPORT_SYMBOL(ixp4xx_uart_read);
> +
> +/**
> + * @brief UART port register write function for IXP4XX
> + *
> + * @param val value to write
> + * @param base base address of UART
> + * @param reg_idx register index
> + *
> + * @return void
> + */
> +void ixp4xx_uart_write(unsigned int val, unsigned long base, unsigned char reg_idx)
> +{
> + writeb(val, 4 * reg_idx + 3 /* big-endian */ + (uint8_t *)base);
> +}
> +EXPORT_SYMBOL(ixp4xx_uart_write);
> +
> +
> +static struct NS16550_plat serial_plat = {
> + .clock = 14745600,
> + .f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR,
> + .reg_read = ixp4xx_uart_read,
> + .reg_write = ixp4xx_uart_write,
> +};
> +
> +/**
> + * @brief UART serial port initialization
> + *
> + * @return result of device registration
> + */
> +static int ixp4xx_console_init(void)
> +{
> + /* Register the serial port */
> + add_ns16550_device(0, (u32)IXP4XX_UART1_BASE, 1024, IORESOURCE_MEM_8BIT, &serial_plat);
we have multiple uart on ixp do no hard code it
> + return 0;
> +}
> +
> +console_initcall(ixp4xx_console_init);
> +
> +#endif /* CONFIG_DRIVER_SERIAL_NS16550 */
> diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
> new file mode 100644
> index 0000000..1aef932
> --- /dev/null
> +++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
> @@ -0,0 +1,55 @@
> +/*
> + * Copyright (C) 2007, 2009 Krzysztof Halasa
> + * Copyright (C) 2007 MontaVista Software, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __MACH_CPU_H__
> +#define __MACH_CPU_H__
> +
> +#include <linux/types.h>
> +#include <asm/cputype.h>
> +
> +/* Processor id value in CP15 Register 0 */
> +#define IXP42X_PROCESSOR_ID_VALUE 0x690541c0 /* including unused 0x690541Ex */
> +#define IXP42X_PROCESSOR_ID_MASK 0xffffffc0
> +
> +#define IXP43X_PROCESSOR_ID_VALUE 0x69054040
> +#define IXP43X_PROCESSOR_ID_MASK 0xfffffff0
> +
> +#define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */
> +#define IXP46X_PROCESSOR_ID_MASK 0xfffffff0
> +
> +#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \
> + IXP42X_PROCESSOR_ID_VALUE)
> +#define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
> + IXP42X_PROCESSOR_ID_VALUE)
> +#define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
> + IXP43X_PROCESSOR_ID_VALUE)
> +#define cpu_is_ixp46x() ((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \
> + IXP46X_PROCESSOR_ID_VALUE)
> +
> +static inline u32 ixp4xx_read_feature_bits(void)
> +{
> + u32 val = ~IXP4XX_EXP_CFG2;
> +
> + if (cpu_is_ixp42x_rev_a0())
> + return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
> + IXP4XX_FEATURE_AES);
> + if (cpu_is_ixp42x())
> + return val & IXP42X_FEATURE_MASK;
> + if (cpu_is_ixp43x())
> + return val & IXP43X_FEATURE_MASK;
> + return val & IXP46X_FEATURE_MASK;
> +}
> +
> +static inline void ixp4xx_write_feature_bits(u32 value)
> +{
> + IXP4XX_EXP_CFG2 = ~value;
> +}
> +
> +#endif /* _MACH_CPU_H */
> diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-head.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-head.h
> new file mode 100644
> index 0000000..b3d357f
> --- /dev/null
> +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-head.h
> @@ -0,0 +1,16 @@
> +#include <mach/ixp4xx-regs.h>
> +#include <asm/barebox-arm-head.h>
> +
> +.macro ixp4xx_cpu_lowlevel_init
> +
> + arm_cpu_lowlevel_init r0
> +
> + add pc, #(0x50000000 - 4) /* jump to ROM area */
> +
> + mov r0, #(IXP4XX_EXP_CFG0 & 0xFFFF0000)
> + orr r0, #(IXP4XX_EXP_CFG0 & 0x0000FFFF)
> + ldr r1, [r0]
> + and r1, r1, #~0x80000000 /* unmap EXP bus from 0x0 */
> + str r1, [r0]
> +
> +.endm
> diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
> new file mode 100644
> index 0000000..da4dc8a
> --- /dev/null
> +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
> @@ -0,0 +1,365 @@
> +/*
> + * Register definitions for IXP4xx chipset.
> + *
> + * Copyright (C) 2002 Intel Corporation.
> + * Copyright (C) 2003-2004 MontaVista Software, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef _ASM_ARM_IXP4XX_H_
> +#define _ASM_ARM_IXP4XX_H_
> +
> +#ifdef __ASSEMBLER__
> +#define IXP4XX_REG(reg) (reg)
> +#else
> +#define IXP4XX_REG(reg) (*(volatile u32 *)(reg))
> +#define IXP4XX_BASE(reg) ((u32*)(reg))
> +#endif
> +
> +/* Expansion Bus region */
> +
> +/* Queue Manager */
> +#define IXP4XX_QMGR_BASE (0x60000000)
> +#define IXP4XX_QMGR_REGION_SIZE (0x00004000)
> +
> +
> +/* PCI Config registers */
> +#define IXP4XX_PCI_CFG_BASE (0xC0000000)
> +#define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000)
> +
> +/* Peripheral space */
> +#define IXP4XX_PERIPHERAL_BASE (0xC8000000)
> +#define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000)
> +
> +/*
> + * Debug UART
> + *
> + * This is basically a remap of UART1 into a region that is section
> + * aligned so that it can be used with the low-level debug code.
> + */
> +#define IXP4XX_DEBUG_UART_BASE (0xC8000000)
> +#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000)
> +
> +/* Expansion Bus Controller registers. */
> +#define IXP4XX_EXP_CS0 IXP4XX_REG(0xC4000000)
> +#define IXP4XX_EXP_CS1 IXP4XX_REG(0xC4000004)
> +#define IXP4XX_EXP_CS2 IXP4XX_REG(0xC4000008)
> +#define IXP4XX_EXP_CS3 IXP4XX_REG(0xC400000C)
> +#define IXP4XX_EXP_CS4 IXP4XX_REG(0xC4000010)
> +#define IXP4XX_EXP_CS5 IXP4XX_REG(0xC4000014)
> +#define IXP4XX_EXP_CS6 IXP4XX_REG(0xC4000018)
> +#define IXP4XX_EXP_CS7 IXP4XX_REG(0xC400001C)
> +
> +#define IXP4XX_EXP_BASE(n) (0x50000000 + (n) * 1000000)
> +
> +#define IXP4XX_EXP_EN 0x80000000
> +#define IXP4XX_EXP_T1(n) (0x10000000 * (n)) /* valid: 0 - 3 */
> +#define IXP4XX_EXP_T2(n) (0x04000000 * (n)) /* valid: 0 - 3 */
> +#define IXP4XX_EXP_T3(n) (0x00400000 * (n)) /* valid: 0 - 15 */
> +#define IXP4XX_EXP_T4(n) (0x00100000 * (n)) /* valid: 0 - 3 */
> +#define IXP4XX_EXP_T5(n) (0x00010000 * (n)) /* valid: 0 - 15 */
> +#define IXP4XX_EXP_INTEL 0x00000000
> +#define IXP4XX_EXP_MOTO 0x00004000
> +#define IXP4XX_EXP_HPI 0x00008000
> +#define IXP4XX_EXP_BITS(n) (0x00000400 * ((n) - 9)) /* valid: 9 - 24 */
> +#define IXP4XX_EXP_BYTE_RD16 0x00000040
> +#define IXP4XX_EXP_HRDY_POL 0x00000020
> +#define IXP4XX_EXP_MUX_EN 0x00000010
> +#define IXP4XX_EXP_SPLT_EN 0x00000008
> +#define IXP4XX_EXP_WR_EN 0x00000002
> +#define IXP4XX_EXP_BYTE_EN 0x00000001
> +
> +#define IXP4XX_EXP_CFG0 IXP4XX_REG(0xC4000020)
> +#define IXP4XX_EXP_CFG1 IXP4XX_REG(0xC4000024)
> +#define IXP4XX_EXP_CFG2 IXP4XX_REG(0xC4000028)
> +#define IXP4XX_EXP_CFG3 IXP4XX_REG(0xC400002C)
> +
> +
> +/* Peripheral Space Register Region Base Addresses */
> +#define IXP4XX_UART1_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0x0000)
> +#define IXP4XX_UART2_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0x1000)
> +#define IXP4XX_PMU_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0x2000)
> +#define IXP4XX_INTC_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0x3000)
> +#define IXP4XX_GPIO_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0x4000)
> +#define IXP4XX_NPEA_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0x6000)
> +#define IXP4XX_NPEB_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0x7000)
> +#define IXP4XX_NPEC_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0x8000)
> +#define IXP4XX_EthB_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0x9000)
> +#define IXP4XX_EthC_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0xA000)
> +#define IXP4XX_USB_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0xB000)
> +/* IXP46x only */
> +#define IXP4XX_EthA_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0xC000)
> +#define IXP4XX_EthB1_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0xD000)
> +#define IXP4XX_EthB2_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0xE000)
> +#define IXP4XX_EthB3_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0xF000)
> +#define IXP4XX_TIMESYNC_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0x10000)
> +#define IXP4XX_I2C_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0x11000)
> +#define IXP4XX_SSP_BASE IXP4XX_BASE(IXP4XX_PERIPHERAL_BASE + 0x12000)
> +
> +/*
> + Constants to make it easy to access Interrupt Controller registers
> + */
> +#define IXP4XX_ICPR_OFFSET 0x00 /* Interrupt Status */
> +#define IXP4XX_ICMR_OFFSET 0x04 /* Interrupt Enable */
> +#define IXP4XX_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */
> +#define IXP4XX_ICIP_OFFSET 0x0C /* IRQ Status */
> +#define IXP4XX_ICFP_OFFSET 0x10 /* FIQ Status */
> +#define IXP4XX_ICHR_OFFSET 0x14 /* Interrupt Priority */
> +#define IXP4XX_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */
> +#define IXP4XX_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */
> +
> +/* IXP465-only */
> +#define IXP4XX_ICPR2_OFFSET 0x20 /* Interrupt Status 2 */
> +#define IXP4XX_ICMR2_OFFSET 0x24 /* Interrupt Enable 2 */
> +#define IXP4XX_ICLR2_OFFSET 0x28 /* Interrupt IRQ/FIQ Select 2 */
> +#define IXP4XX_ICIP2_OFFSET 0x2C /* IRQ Status */
> +#define IXP4XX_ICFP2_OFFSET 0x30 /* FIQ Status */
> +#define IXP4XX_ICEEN_OFFSET 0x34 /* Error High Pri Enable */
> +
> +
> +/* Interrupt Controller Register Definitions. */
> +#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE + (x)))
> +
> +#define IXP4XX_ICPR IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET)
> +#define IXP4XX_ICMR IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET)
> +#define IXP4XX_ICLR IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET)
> +#define IXP4XX_ICIP IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET)
> +#define IXP4XX_ICFP IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET)
> +#define IXP4XX_ICHR IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET)
> +#define IXP4XX_ICIH IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET)
> +#define IXP4XX_ICFH IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET)
> +#define IXP4XX_ICPR2 IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET)
> +#define IXP4XX_ICMR2 IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET)
> +#define IXP4XX_ICLR2 IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET)
> +#define IXP4XX_ICIP2 IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET)
> +#define IXP4XX_ICFP2 IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET)
> +#define IXP4XX_ICEEN IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET)
> +
> +/* Constants to make it easy to access GPIO registers */
> +#define IXP4XX_GPIO_GPOUTR_OFFSET 0x00
> +#define IXP4XX_GPIO_GPOER_OFFSET 0x04
> +#define IXP4XX_GPIO_GPINR_OFFSET 0x08
> +#define IXP4XX_GPIO_GPISR_OFFSET 0x0C
> +#define IXP4XX_GPIO_GPIT1R_OFFSET 0x10
> +#define IXP4XX_GPIO_GPIT2R_OFFSET 0x14
> +#define IXP4XX_GPIO_GPCLKR_OFFSET 0x18
> +#define IXP4XX_GPIO_GPDBSELR_OFFSET 0x1C
> +
> +/* GPIO Register Definitions - perform only 32-bit reads/writes */
> +#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE + (x)))
> +
> +#define IXP4XX_GPIO_GPOUTR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET)
> +#define IXP4XX_GPIO_GPOER IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET)
> +#define IXP4XX_GPIO_GPINR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET)
> +#define IXP4XX_GPIO_GPISR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET)
> +#define IXP4XX_GPIO_GPIT1R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET)
> +#define IXP4XX_GPIO_GPIT2R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET)
> +#define IXP4XX_GPIO_GPCLKR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET)
> +#define IXP4XX_GPIO_GPDBSELR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET)
> +
> +/* GPIO register bit definitions */
> +
> +/* Interrupt styles */
> +#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0
> +#define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1
> +#define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2
> +#define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3
> +#define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4
> +
> +/* Mask used to clear interrupt styles */
> +#define IXP4XX_GPIO_STYLE_CLEAR 0x7
> +#define IXP4XX_GPIO_STYLE_SIZE 3
> +
> +/* Operating System Timer Register Definitions. */
> +#define IXP4XX_OSTS IXP4XX_REG(0xC8005000) /* Continious TimeStamp */
> +#define IXP4XX_OST1 IXP4XX_REG(0xC8005004) /* Timer 1 Timestamp */
> +#define IXP4XX_OSRT1 IXP4XX_REG(0xC8005008) /* Timer 1 Reload */
> +#define IXP4XX_OST2 IXP4XX_REG(0xC800500C) /* Timer 2 Timestamp */
> +#define IXP4XX_OSRT2 IXP4XX_REG(0xC8005010) /* Timer 2 Reload */
> +#define IXP4XX_OSWT IXP4XX_REG(0xC8005014) /* Watchdog Timer */
> +#define IXP4XX_OSWE IXP4XX_REG(0xC8005018) /* Watchdog Enable */
> +#define IXP4XX_OSWK IXP4XX_REG(0xC800501C) /* Watchdog Key */
> +#define IXP4XX_OSST IXP4XX_REG(0xC8005020) /* Timer Status */
> +
> +/* Timer register values and bit definitions */
> +#define IXP4XX_OST_ENABLE 0x00000001
> +#define IXP4XX_OST_ONE_SHOT 0x00000002
> +/* Low order bits of reload value ignored */
> +#define IXP4XX_OST_RELOAD_MASK 0x00000003
> +#define IXP4XX_OST_DISABLED 0x00000000
> +#define IXP4XX_OSST_TIMER_1_PEND 0x00000001
> +#define IXP4XX_OSST_TIMER_2_PEND 0x00000002
> +#define IXP4XX_OSST_TIMER_TS_PEND 0x00000004
> +#define IXP4XX_OSST_TIMER_WDOG_PEND 0x00000008
> +#define IXP4XX_OSST_TIMER_WARM_RESET 0x00000010
> +
> +#define IXP4XX_WDT_KEY 0x0000482E
> +
> +#define IXP4XX_WDT_RESET_ENABLE 0x00000001
> +#define IXP4XX_WDT_IRQ_ENABLE 0x00000002
> +#define IXP4XX_WDT_COUNT_ENABLE 0x00000004
> +
> +
> +/* Constants to make it easy to access PCI Control/Status registers */
> +#define PCI_NP_AD_OFFSET 0x00
> +#define PCI_NP_CBE_OFFSET 0x04
> +#define PCI_NP_WDATA_OFFSET 0x08
> +#define PCI_NP_RDATA_OFFSET 0x0c
> +#define PCI_CRP_AD_CBE_OFFSET 0x10
> +#define PCI_CRP_WDATA_OFFSET 0x14
> +#define PCI_CRP_RDATA_OFFSET 0x18
> +#define PCI_CSR_OFFSET 0x1c
> +#define PCI_ISR_OFFSET 0x20
> +#define PCI_INTEN_OFFSET 0x24
> +#define PCI_DMACTRL_OFFSET 0x28
> +#define PCI_AHBMEMBASE_OFFSET 0x2c
> +#define PCI_AHBIOBASE_OFFSET 0x30
> +#define PCI_PCIMEMBASE_OFFSET 0x34
> +#define PCI_AHBDOORBELL_OFFSET 0x38
> +#define PCI_PCIDOORBELL_OFFSET 0x3C
> +#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40
> +#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44
> +#define PCI_ATPDMA0_LENADDR_OFFSET 0x48
> +#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C
> +#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50
> +#define PCI_ATPDMA1_LENADDR_OFFSET 0x54
> +
> +/* PCI Control/Status Registers */
> +#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE + (x)))
> +
> +#define PCI_NP_AD IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
> +#define PCI_NP_CBE IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
> +#define PCI_NP_WDATA IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
> +#define PCI_NP_RDATA IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
> +#define PCI_CRP_AD_CBE IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
> +#define PCI_CRP_WDATA IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
> +#define PCI_CRP_RDATA IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
> +#define PCI_CSR IXP4XX_PCI_CSR(PCI_CSR_OFFSET)
> +#define PCI_ISR IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
> +#define PCI_INTEN IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
> +#define PCI_DMACTRL IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
> +#define PCI_AHBMEMBASE IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
> +#define PCI_AHBIOBASE IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
> +#define PCI_PCIMEMBASE IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
> +#define PCI_AHBDOORBELL IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
> +#define PCI_PCIDOORBELL IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
> +#define PCI_ATPDMA0_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
> +#define PCI_ATPDMA0_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
> +#define PCI_ATPDMA0_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
> +#define PCI_ATPDMA1_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
> +#define PCI_ATPDMA1_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
> +#define PCI_ATPDMA1_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
> +
> +/* PCI register values and bit definitions */
> +
> +/* CSR bit definitions */
> +#define PCI_CSR_HOST 0x00000001
> +#define PCI_CSR_ARBEN 0x00000002
> +#define PCI_CSR_ADS 0x00000004
> +#define PCI_CSR_PDS 0x00000008
> +#define PCI_CSR_ABE 0x00000010
> +#define PCI_CSR_DBT 0x00000020
> +#define PCI_CSR_ASE 0x00000100
> +#define PCI_CSR_IC 0x00008000
> +
> +/* ISR (Interrupt status) Register bit definitions */
> +#define PCI_ISR_PSE 0x00000001
> +#define PCI_ISR_PFE 0x00000002
> +#define PCI_ISR_PPE 0x00000004
> +#define PCI_ISR_AHBE 0x00000008
> +#define PCI_ISR_APDC 0x00000010
> +#define PCI_ISR_PADC 0x00000020
> +#define PCI_ISR_ADB 0x00000040
> +#define PCI_ISR_PDB 0x00000080
> +
> +/* INTEN (Interrupt Enable) Register bit definitions */
> +#define PCI_INTEN_PSE 0x00000001
> +#define PCI_INTEN_PFE 0x00000002
> +#define PCI_INTEN_PPE 0x00000004
> +#define PCI_INTEN_AHBE 0x00000008
> +#define PCI_INTEN_APDC 0x00000010
> +#define PCI_INTEN_PADC 0x00000020
> +#define PCI_INTEN_ADB 0x00000040
> +#define PCI_INTEN_PDB 0x00000080
> +
> +/* Shift value for byte enable on NP cmd/byte enable register */
> +#define IXP4XX_PCI_NP_CBE_BESL 4
> +
> +/* PCI commands supported by NP access unit */
> +#define NP_CMD_IOREAD 0x2
> +#define NP_CMD_IOWRITE 0x3
> +#define NP_CMD_CONFIGREAD 0xA
> +#define NP_CMD_CONFIGWRITE 0xB
> +#define NP_CMD_MEMREAD 0x6
> +#define NP_CMD_MEMWRITE 0x7
> +
> +/* Constants for CRP access into local config space */
> +#define CRP_AD_CBE_BESL 20
> +#define CRP_AD_CBE_WRITE 0x00010000
> +
> +/* USB Device Controller */
> +# define IXP4XX_USB_REG(x) (*((volatile u32 *)(x)))
> +
> +/* SDRAM Controller registers. */
> +#define IXP4XX_SDRAM_CONFIG IXP4XX_REG(0xCC000000)
> +#define IXP4XX_SDRAM_REFRESH IXP4XX_REG(0xCC000004)
> +#define IXP4XX_SDRAM_IR IXP4XX_REG(0xCC000008)
> +
> +/* "fuse" bits of IXP_EXP_CFG2 */
> +/* All IXP4xx CPUs */
> +#define IXP4XX_FEATURE_RCOMP (1 << 0)
> +#define IXP4XX_FEATURE_USB_DEVICE (1 << 1)
> +#define IXP4XX_FEATURE_HASH (1 << 2)
> +#define IXP4XX_FEATURE_AES (1 << 3)
> +#define IXP4XX_FEATURE_DES (1 << 4)
> +#define IXP4XX_FEATURE_HDLC (1 << 5)
> +#define IXP4XX_FEATURE_AAL (1 << 6)
> +#define IXP4XX_FEATURE_HSS (1 << 7)
> +#define IXP4XX_FEATURE_UTOPIA (1 << 8)
> +#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9)
> +#define IXP4XX_FEATURE_NPEC_ETH (1 << 10)
> +#define IXP4XX_FEATURE_RESET_NPEA (1 << 11)
> +#define IXP4XX_FEATURE_RESET_NPEB (1 << 12)
> +#define IXP4XX_FEATURE_RESET_NPEC (1 << 13)
> +#define IXP4XX_FEATURE_PCI (1 << 14)
> +#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16)
> +#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
> +#define IXP42X_FEATURE_MASK (IXP4XX_FEATURE_RCOMP | \
> + IXP4XX_FEATURE_USB_DEVICE | \
> + IXP4XX_FEATURE_HASH | \
> + IXP4XX_FEATURE_AES | \
> + IXP4XX_FEATURE_DES | \
> + IXP4XX_FEATURE_HDLC | \
> + IXP4XX_FEATURE_AAL | \
> + IXP4XX_FEATURE_HSS | \
> + IXP4XX_FEATURE_UTOPIA | \
> + IXP4XX_FEATURE_NPEB_ETH0 | \
> + IXP4XX_FEATURE_NPEC_ETH | \
> + IXP4XX_FEATURE_RESET_NPEA | \
> + IXP4XX_FEATURE_RESET_NPEB | \
> + IXP4XX_FEATURE_RESET_NPEC | \
> + IXP4XX_FEATURE_PCI | \
> + IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \
> + IXP4XX_FEATURE_XSCALE_MAX_FREQ)
> +
> +/* IXP43x/46x CPUs */
> +#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15)
> +#define IXP4XX_FEATURE_USB_HOST (1 << 18)
> +#define IXP4XX_FEATURE_NPEA_ETH (1 << 19)
> +#define IXP43X_FEATURE_MASK (IXP42X_FEATURE_MASK | \
> + IXP4XX_FEATURE_ECC_TIMESYNC | \
> + IXP4XX_FEATURE_USB_HOST | \
> + IXP4XX_FEATURE_NPEA_ETH)
> +
> +/* IXP46x CPU (including IXP455) only */
> +#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20)
> +#define IXP4XX_FEATURE_RSA (1 << 21)
> +#define IXP46X_FEATURE_MASK (IXP43X_FEATURE_MASK | \
> + IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
> + IXP4XX_FEATURE_RSA)
> +
> +#endif
> diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
> index b7913aa..be1b968 100644
> --- a/drivers/serial/serial_ns16550.c
> +++ b/drivers/serial/serial_ns16550.c
please split this in an other patch
and pass this as a pdata
> @@ -137,7 +137,11 @@ static void ns16550_serial_init_port(struct console_device *cdev)
> {
> /* initializing the device for the first time */
> ns16550_write(cdev, 0x00, lcr); /* select ier reg */
> +#ifdef CONFIG_ARCH_IXP4XX
> + ns16550_write(cdev, IER_UUE, ier); /* Enable UART operation */
> +#else
> ns16550_write(cdev, 0x00, ier);
> +#endif
>
> #ifdef CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS
> ns16550_write(cdev, 0x07, mdr1); /* Disable */
> diff --git a/drivers/serial/serial_ns16550.h b/drivers/serial/serial_ns16550.h
> index db8fe64..132f46e 100644
> --- a/drivers/serial/serial_ns16550.h
> +++ b/drivers/serial/serial_ns16550.h
> @@ -50,6 +50,8 @@
> #define dll rbr
> #define dlm ier
>
> +#define IER_UUE 0x40 /* UART Unit Enable (XScale) */
> +
> #define FCR_FIFO_EN 0x01 /* Fifo enable */
> #define FCR_RXSR 0x02 /* Receiver soft reset */
> #define FCR_TXSR 0x04 /* Transmitter soft reset */
>
> --
> Krzysztof Halasa
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-04-08 7:31 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-30 11:19 IXP4xx again Krzysztof Halasa
2013-03-30 11:24 ` [PATCH] ARM: XScale processors don't support "clean+invalidate D entry" operation Krzysztof Halasa
2013-03-30 11:25 ` [PATCH] Implement ALTERNATE memory layout Krzysztof Halasa
2013-03-30 12:01 ` Alexander Shiyan
2013-03-30 13:15 ` Krzysztof Halasa
2013-03-30 13:23 ` Re[2]: " Alexander Shiyan
2013-03-30 19:57 ` Krzysztof Halasa
2013-03-30 18:45 ` Antony Pavlov
2013-04-01 18:04 ` Sascha Hauer
2013-04-02 7:20 ` Sascha Hauer
2013-03-30 11:26 ` [PATCH] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform Krzysztof Halasa
2013-04-02 6:52 ` Sascha Hauer
2013-04-07 11:42 ` Krzysztof Halasa
2013-04-07 19:54 ` [PATCH] ARM: Support for IXP4xx CPU Krzysztof Halasa
2013-04-08 7:27 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-04-14 10:30 ` Krzysztof Halasa
2013-04-14 11:51 ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-07 19:55 ` [PATCH] ARM: Support for IXP4xx hardware Queue Manager Krzysztof Halasa
2013-04-08 7:31 ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-07 19:57 ` [PATCH] ARM: Support for IXP4xx Network Processor Engines (NPEs) Krzysztof Halasa
2013-04-08 7:30 ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-07 19:58 ` [PATCH] ARM: Support for IXP4xx built-in Ethernet interfaces Krzysztof Halasa
2013-04-08 7:29 ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-08 7:56 ` [PATCH] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130408072708.GT1568@game.jcrosoft.org \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
--cc=khc@pm.waw.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox