* [PATCH 1/1] highbank: switch to defaultenv-2
@ 2013-04-06 16:31 Jean-Christophe PLAGNIOL-VILLARD
2013-04-09 7:06 ` Sascha Hauer
0 siblings, 1 reply; 5+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-04-06 16:31 UTC (permalink / raw)
To: barebox; +Cc: Rob Herring
this will allow to have boot sequence and later to use PXE
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Rob Herring <rob.herring@calxeda.com>
---
arch/arm/boards/highbank/env/boot.d/010-ahci-boot | 1 +
arch/arm/boards/highbank/env/boot.d/011-ahci | 1 +
arch/arm/boards/highbank/env/boot.d/020-mmc-boot | 1 +
arch/arm/boards/highbank/env/boot.d/021-mmc | 1 +
arch/arm/boards/highbank/env/boot.d/030-net | 1 +
arch/arm/boards/highbank/env/boot.d/031-net-eth1 | 1 +
arch/arm/boards/highbank/env/boot/ahci | 21 +++++++++++++
arch/arm/boards/highbank/env/boot/ahci-boot | 21 +++++++++++++
arch/arm/boards/highbank/env/boot/mmc | 21 +++++++++++++
arch/arm/boards/highbank/env/boot/mmc-boot | 21 +++++++++++++
arch/arm/boards/highbank/env/boot/net | 18 +++++++++++
arch/arm/boards/highbank/env/boot/net-eth1 | 18 +++++++++++
arch/arm/boards/highbank/env/config | 33 --------------------
arch/arm/boards/highbank/env/config-board | 11 +++++++
arch/arm/boards/highbank/env/data/oftree | 4 +++
.../env/{bin/init_board => init/001-dtb-probe} | 0
arch/arm/boards/highbank/env/init/automount | 27 ++++++++++++++++
arch/arm/boards/highbank/env/init/ps1 | 9 ++++++
arch/arm/mach-highbank/Kconfig | 1 +
19 files changed, 178 insertions(+), 33 deletions(-)
create mode 120000 arch/arm/boards/highbank/env/boot.d/010-ahci-boot
create mode 120000 arch/arm/boards/highbank/env/boot.d/011-ahci
create mode 120000 arch/arm/boards/highbank/env/boot.d/020-mmc-boot
create mode 120000 arch/arm/boards/highbank/env/boot.d/021-mmc
create mode 120000 arch/arm/boards/highbank/env/boot.d/030-net
create mode 120000 arch/arm/boards/highbank/env/boot.d/031-net-eth1
create mode 100644 arch/arm/boards/highbank/env/boot/ahci
create mode 100644 arch/arm/boards/highbank/env/boot/ahci-boot
create mode 100644 arch/arm/boards/highbank/env/boot/mmc
create mode 100644 arch/arm/boards/highbank/env/boot/mmc-boot
create mode 100644 arch/arm/boards/highbank/env/boot/net
create mode 100644 arch/arm/boards/highbank/env/boot/net-eth1
delete mode 100644 arch/arm/boards/highbank/env/config
create mode 100644 arch/arm/boards/highbank/env/config-board
create mode 100644 arch/arm/boards/highbank/env/data/oftree
rename arch/arm/boards/highbank/env/{bin/init_board => init/001-dtb-probe} (100%)
create mode 100644 arch/arm/boards/highbank/env/init/automount
create mode 100644 arch/arm/boards/highbank/env/init/ps1
diff --git a/arch/arm/boards/highbank/env/boot.d/010-ahci-boot b/arch/arm/boards/highbank/env/boot.d/010-ahci-boot
new file mode 120000
index 0000000..3672f04
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot.d/010-ahci-boot
@@ -0,0 +1 @@
+../boot/ahci-boot
\ No newline at end of file
diff --git a/arch/arm/boards/highbank/env/boot.d/011-ahci b/arch/arm/boards/highbank/env/boot.d/011-ahci
new file mode 120000
index 0000000..36b3b28
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot.d/011-ahci
@@ -0,0 +1 @@
+../boot/ahci
\ No newline at end of file
diff --git a/arch/arm/boards/highbank/env/boot.d/020-mmc-boot b/arch/arm/boards/highbank/env/boot.d/020-mmc-boot
new file mode 120000
index 0000000..85c19bb
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot.d/020-mmc-boot
@@ -0,0 +1 @@
+../boot/mmc-boot
\ No newline at end of file
diff --git a/arch/arm/boards/highbank/env/boot.d/021-mmc b/arch/arm/boards/highbank/env/boot.d/021-mmc
new file mode 120000
index 0000000..5af95d0
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot.d/021-mmc
@@ -0,0 +1 @@
+../boot/mmc
\ No newline at end of file
diff --git a/arch/arm/boards/highbank/env/boot.d/030-net b/arch/arm/boards/highbank/env/boot.d/030-net
new file mode 120000
index 0000000..70b8ea3
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot.d/030-net
@@ -0,0 +1 @@
+../boot/net
\ No newline at end of file
diff --git a/arch/arm/boards/highbank/env/boot.d/031-net-eth1 b/arch/arm/boards/highbank/env/boot.d/031-net-eth1
new file mode 120000
index 0000000..5a30a30
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot.d/031-net-eth1
@@ -0,0 +1 @@
+../boot/net-eth1
\ No newline at end of file
diff --git a/arch/arm/boards/highbank/env/boot/ahci b/arch/arm/boards/highbank/env/boot/ahci
new file mode 100644
index 0000000..3bdb809
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot/ahci
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "AHCI"
+ exit
+fi
+
+path="/mnt/ahci"
+
+global.bootm.image="${path}/zImage"
+
+. /env/data/oftree
+
+oftree=${path}/oftree
+if [ -f $oftree ]; then
+ global.bootm.oftree="$oftree"
+fi
+
+# The rootdevice may actually be mmcblk1p2 if a card
+# is inserted to the back MMC slot
+global.linux.bootargs.dyn.root="root=/dev/sda2"
diff --git a/arch/arm/boards/highbank/env/boot/ahci-boot b/arch/arm/boards/highbank/env/boot/ahci-boot
new file mode 100644
index 0000000..0064a46
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot/ahci-boot
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "AHCI (UEFI boot partiton)"
+ exit
+fi
+
+path="/mnt/ahci-boot"
+
+global.bootm.image="${path}/zImage"
+
+. /env/data/oftree
+
+oftree=${path}/oftree
+if [ -f $oftree ]; then
+ global.bootm.oftree="$oftree"
+fi
+
+# The rootdevice may actually be mmcblk1p2 if a card
+# is inserted to the back MMC slot
+global.linux.bootargs.dyn.root="root=/dev/sda2"
diff --git a/arch/arm/boards/highbank/env/boot/mmc b/arch/arm/boards/highbank/env/boot/mmc
new file mode 100644
index 0000000..43a04b5
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot/mmc
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "MMC slot"
+ exit
+fi
+
+path="/mnt/mmc"
+
+global.bootm.image="${path}/zimage"
+
+. /env/data/oftree
+
+oftree=${path}/oftree
+if [ -f $oftree ]; then
+ global.bootm.oftree="$oftree"
+fi
+
+# The rootdevice may actually be mmcblk1p2 if a card
+# is inserted to the back MMC slot
+global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2"
diff --git a/arch/arm/boards/highbank/env/boot/mmc-boot b/arch/arm/boards/highbank/env/boot/mmc-boot
new file mode 100644
index 0000000..93cd99b
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot/mmc-boot
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "MMC slot (UEFI boot partiton)"
+ exit
+fi
+
+path="/mnt/mmc-boot"
+
+global.bootm.image="${path}/zimage"
+
+. /env/data/oftree
+
+oftree=${path}/oftree
+if [ -f $oftree ]; then
+ global.bootm.oftree="$oftree"
+fi
+
+# The rootdevice may actually be mmcblk1p2 if a card
+# is inserted to the back MMC slot
+global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2"
diff --git a/arch/arm/boards/highbank/env/boot/net b/arch/arm/boards/highbank/env/boot/net
new file mode 100644
index 0000000..80862cd
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot/net
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "network (tftp, nfs) (eth0)"
+ exit
+fi
+
+ethact eth0
+
+path="/mnt/tftp"
+
+. /env/data/oftree
+
+global.bootm.image="${path}/${global.user}-linux-${global.hostname}"
+#global.bootm.oftree="${path}/${global.user}-oftree-${global.hostname}"
+nfsroot="/home/${global.user}/nfsroot/${global.hostname}"
+bootargs-ip
+global.linux.bootargs.dyn.root="root=/dev/nfs nfsroot=$nfsroot,v3,tcp"
diff --git a/arch/arm/boards/highbank/env/boot/net-eth1 b/arch/arm/boards/highbank/env/boot/net-eth1
new file mode 100644
index 0000000..d9e9804
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot/net-eth1
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "network (tftp, nfs) (eth1)"
+ exit
+fi
+
+ethact eth1
+
+path="/mnt/tftp"
+
+. /env/data/oftree
+
+global.bootm.image="${path}/${global.user}-linux-${global.hostname}"
+#global.bootm.oftree="${path}/${global.user}-oftree-${global.hostname}"
+nfsroot="/home/${global.user}/nfsroot/${global.hostname}"
+bootargs-ip
+global.linux.bootargs.dyn.root="root=/dev/nfs nfsroot=$nfsroot,v3,tcp"
diff --git a/arch/arm/boards/highbank/env/config b/arch/arm/boards/highbank/env/config
deleted file mode 100644
index 1bb2c49..0000000
--- a/arch/arm/boards/highbank/env/config
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/sh
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
-global.dhcp.vendor_id=barebox-highbank
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp' or 'nor'
-kernel_loc=tftp
-# can be either 'net', 'nor' or 'initrd'
-rootfs_loc=initrd
-
-# can be either 'jffs2' or 'ubifs'
-rootfs_type=ubifs
-rootfsimage=root.$rootfs_type
-
-kernelimage=zImage
-#kernelimage=uImage
-#kernelimage=Image
-#kernelimage=Image.lzo
-
-autoboot_timeout=3
-
-bootargs="console=ttyAMA0,115200n8 CONSOLE=/dev/ttyAMA0"
-
-# set a fancy prompt (if support is compiled in)
-PS1="\e[1;31m[barebox@\h]:\w\e[0m\n# "
diff --git a/arch/arm/boards/highbank/env/config-board b/arch/arm/boards/highbank/env/config-board
new file mode 100644
index 0000000..a64d9e3
--- /dev/null
+++ b/arch/arm/boards/highbank/env/config-board
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+# board defaults, do not change in running system. Change /env/config
+# instead
+
+global.hostname=highbank
+global.allow_color=true
+global.autoboot_timeout=3
+global.bootm.oftree="/dev/dtb"
+global.linux.bootargs.base="console=ttyAMA0,115200n8 CONSOLE=/dev/ttyAMA0"
+global.boot.default=/env/boot.d
diff --git a/arch/arm/boards/highbank/env/data/oftree b/arch/arm/boards/highbank/env/data/oftree
new file mode 100644
index 0000000..9a94b31
--- /dev/null
+++ b/arch/arm/boards/highbank/env/data/oftree
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+#device tree provided by the firmware
+global.bootm.oftree="/dev/dtb"
diff --git a/arch/arm/boards/highbank/env/bin/init_board b/arch/arm/boards/highbank/env/init/001-dtb-probe
similarity index 100%
rename from arch/arm/boards/highbank/env/bin/init_board
rename to arch/arm/boards/highbank/env/init/001-dtb-probe
diff --git a/arch/arm/boards/highbank/env/init/automount b/arch/arm/boards/highbank/env/init/automount
new file mode 100644
index 0000000..2c283c6
--- /dev/null
+++ b/arch/arm/boards/highbank/env/init/automount
@@ -0,0 +1,27 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "Automountpoints"
+ exit
+fi
+
+# automount tftp server based on $eth0.serverip
+
+mkdir -p /mnt/tftp
+automount /mnt/tftp 'ifup eth0 && mount -t tftp $eth0.serverip /mnt/tftp'
+
+# SD card slot, boot partition
+mkdir -p /mnt/mmc-boot
+automount -d /mnt/mmc 'mount /dev/disk0.boot /mnt/mmc-boot'
+
+# SD card slot, first partition
+mkdir -p /mnt/mmc
+automount -d /mnt/mmc 'mount /dev/disk0.0 /mnt/mmc'
+
+# AHCI, boot partition
+mkdir -p /mnt/ahci-boot
+automount -d /mnt/ahci 'mount /dev/ata0.boot /mnt/ahci-boot'
+
+# AHCI, first partition
+mkdir -p /mnt/ahci
+automount -d /mnt/ahci 'mount /dev/ata0.0 /mnt/ahci'
diff --git a/arch/arm/boards/highbank/env/init/ps1 b/arch/arm/boards/highbank/env/init/ps1
new file mode 100644
index 0000000..a94acc1
--- /dev/null
+++ b/arch/arm/boards/highbank/env/init/ps1
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+/env/config
+
+if [ ${global.allow_color} = "true" ]; then
+ export PS1="\e[1;32mbarebox@\e[1;36m\h:\w\e[0m\n# "
+else
+ export PS1="barebox@\h:\w\n# "
+fi
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 47c6405..9cfe539 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -12,6 +12,7 @@ choice
config MACH_HIGHBANK
bool "Calxeda Highbank"
+ select HAVE_DEFAULT_ENVIRONMENT_NEW
endchoice
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH 1/1] highbank: switch to defaultenv-2
2013-04-06 16:31 [PATCH 1/1] highbank: switch to defaultenv-2 Jean-Christophe PLAGNIOL-VILLARD
@ 2013-04-09 7:06 ` Sascha Hauer
0 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2013-04-09 7:06 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox, Rob Herring
On Sat, Apr 06, 2013 at 06:31:57PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> this will allow to have boot sequence and later to use PXE
>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> Cc: Rob Herring <rob.herring@calxeda.com>
Applied, thanks
Sascha
> ---
> arch/arm/boards/highbank/env/boot.d/010-ahci-boot | 1 +
> arch/arm/boards/highbank/env/boot.d/011-ahci | 1 +
> arch/arm/boards/highbank/env/boot.d/020-mmc-boot | 1 +
> arch/arm/boards/highbank/env/boot.d/021-mmc | 1 +
> arch/arm/boards/highbank/env/boot.d/030-net | 1 +
> arch/arm/boards/highbank/env/boot.d/031-net-eth1 | 1 +
> arch/arm/boards/highbank/env/boot/ahci | 21 +++++++++++++
> arch/arm/boards/highbank/env/boot/ahci-boot | 21 +++++++++++++
> arch/arm/boards/highbank/env/boot/mmc | 21 +++++++++++++
> arch/arm/boards/highbank/env/boot/mmc-boot | 21 +++++++++++++
> arch/arm/boards/highbank/env/boot/net | 18 +++++++++++
> arch/arm/boards/highbank/env/boot/net-eth1 | 18 +++++++++++
> arch/arm/boards/highbank/env/config | 33 --------------------
> arch/arm/boards/highbank/env/config-board | 11 +++++++
> arch/arm/boards/highbank/env/data/oftree | 4 +++
> .../env/{bin/init_board => init/001-dtb-probe} | 0
> arch/arm/boards/highbank/env/init/automount | 27 ++++++++++++++++
> arch/arm/boards/highbank/env/init/ps1 | 9 ++++++
> arch/arm/mach-highbank/Kconfig | 1 +
> 19 files changed, 178 insertions(+), 33 deletions(-)
> create mode 120000 arch/arm/boards/highbank/env/boot.d/010-ahci-boot
> create mode 120000 arch/arm/boards/highbank/env/boot.d/011-ahci
> create mode 120000 arch/arm/boards/highbank/env/boot.d/020-mmc-boot
> create mode 120000 arch/arm/boards/highbank/env/boot.d/021-mmc
> create mode 120000 arch/arm/boards/highbank/env/boot.d/030-net
> create mode 120000 arch/arm/boards/highbank/env/boot.d/031-net-eth1
> create mode 100644 arch/arm/boards/highbank/env/boot/ahci
> create mode 100644 arch/arm/boards/highbank/env/boot/ahci-boot
> create mode 100644 arch/arm/boards/highbank/env/boot/mmc
> create mode 100644 arch/arm/boards/highbank/env/boot/mmc-boot
> create mode 100644 arch/arm/boards/highbank/env/boot/net
> create mode 100644 arch/arm/boards/highbank/env/boot/net-eth1
> delete mode 100644 arch/arm/boards/highbank/env/config
> create mode 100644 arch/arm/boards/highbank/env/config-board
> create mode 100644 arch/arm/boards/highbank/env/data/oftree
> rename arch/arm/boards/highbank/env/{bin/init_board => init/001-dtb-probe} (100%)
> create mode 100644 arch/arm/boards/highbank/env/init/automount
> create mode 100644 arch/arm/boards/highbank/env/init/ps1
>
> diff --git a/arch/arm/boards/highbank/env/boot.d/010-ahci-boot b/arch/arm/boards/highbank/env/boot.d/010-ahci-boot
> new file mode 120000
> index 0000000..3672f04
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot.d/010-ahci-boot
> @@ -0,0 +1 @@
> +../boot/ahci-boot
> \ No newline at end of file
> diff --git a/arch/arm/boards/highbank/env/boot.d/011-ahci b/arch/arm/boards/highbank/env/boot.d/011-ahci
> new file mode 120000
> index 0000000..36b3b28
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot.d/011-ahci
> @@ -0,0 +1 @@
> +../boot/ahci
> \ No newline at end of file
> diff --git a/arch/arm/boards/highbank/env/boot.d/020-mmc-boot b/arch/arm/boards/highbank/env/boot.d/020-mmc-boot
> new file mode 120000
> index 0000000..85c19bb
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot.d/020-mmc-boot
> @@ -0,0 +1 @@
> +../boot/mmc-boot
> \ No newline at end of file
> diff --git a/arch/arm/boards/highbank/env/boot.d/021-mmc b/arch/arm/boards/highbank/env/boot.d/021-mmc
> new file mode 120000
> index 0000000..5af95d0
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot.d/021-mmc
> @@ -0,0 +1 @@
> +../boot/mmc
> \ No newline at end of file
> diff --git a/arch/arm/boards/highbank/env/boot.d/030-net b/arch/arm/boards/highbank/env/boot.d/030-net
> new file mode 120000
> index 0000000..70b8ea3
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot.d/030-net
> @@ -0,0 +1 @@
> +../boot/net
> \ No newline at end of file
> diff --git a/arch/arm/boards/highbank/env/boot.d/031-net-eth1 b/arch/arm/boards/highbank/env/boot.d/031-net-eth1
> new file mode 120000
> index 0000000..5a30a30
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot.d/031-net-eth1
> @@ -0,0 +1 @@
> +../boot/net-eth1
> \ No newline at end of file
> diff --git a/arch/arm/boards/highbank/env/boot/ahci b/arch/arm/boards/highbank/env/boot/ahci
> new file mode 100644
> index 0000000..3bdb809
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot/ahci
> @@ -0,0 +1,21 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + boot-menu-add-entry "$0" "AHCI"
> + exit
> +fi
> +
> +path="/mnt/ahci"
> +
> +global.bootm.image="${path}/zImage"
> +
> +. /env/data/oftree
> +
> +oftree=${path}/oftree
> +if [ -f $oftree ]; then
> + global.bootm.oftree="$oftree"
> +fi
> +
> +# The rootdevice may actually be mmcblk1p2 if a card
> +# is inserted to the back MMC slot
> +global.linux.bootargs.dyn.root="root=/dev/sda2"
> diff --git a/arch/arm/boards/highbank/env/boot/ahci-boot b/arch/arm/boards/highbank/env/boot/ahci-boot
> new file mode 100644
> index 0000000..0064a46
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot/ahci-boot
> @@ -0,0 +1,21 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + boot-menu-add-entry "$0" "AHCI (UEFI boot partiton)"
> + exit
> +fi
> +
> +path="/mnt/ahci-boot"
> +
> +global.bootm.image="${path}/zImage"
> +
> +. /env/data/oftree
> +
> +oftree=${path}/oftree
> +if [ -f $oftree ]; then
> + global.bootm.oftree="$oftree"
> +fi
> +
> +# The rootdevice may actually be mmcblk1p2 if a card
> +# is inserted to the back MMC slot
> +global.linux.bootargs.dyn.root="root=/dev/sda2"
> diff --git a/arch/arm/boards/highbank/env/boot/mmc b/arch/arm/boards/highbank/env/boot/mmc
> new file mode 100644
> index 0000000..43a04b5
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot/mmc
> @@ -0,0 +1,21 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + boot-menu-add-entry "$0" "MMC slot"
> + exit
> +fi
> +
> +path="/mnt/mmc"
> +
> +global.bootm.image="${path}/zimage"
> +
> +. /env/data/oftree
> +
> +oftree=${path}/oftree
> +if [ -f $oftree ]; then
> + global.bootm.oftree="$oftree"
> +fi
> +
> +# The rootdevice may actually be mmcblk1p2 if a card
> +# is inserted to the back MMC slot
> +global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2"
> diff --git a/arch/arm/boards/highbank/env/boot/mmc-boot b/arch/arm/boards/highbank/env/boot/mmc-boot
> new file mode 100644
> index 0000000..93cd99b
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot/mmc-boot
> @@ -0,0 +1,21 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + boot-menu-add-entry "$0" "MMC slot (UEFI boot partiton)"
> + exit
> +fi
> +
> +path="/mnt/mmc-boot"
> +
> +global.bootm.image="${path}/zimage"
> +
> +. /env/data/oftree
> +
> +oftree=${path}/oftree
> +if [ -f $oftree ]; then
> + global.bootm.oftree="$oftree"
> +fi
> +
> +# The rootdevice may actually be mmcblk1p2 if a card
> +# is inserted to the back MMC slot
> +global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2"
> diff --git a/arch/arm/boards/highbank/env/boot/net b/arch/arm/boards/highbank/env/boot/net
> new file mode 100644
> index 0000000..80862cd
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot/net
> @@ -0,0 +1,18 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + boot-menu-add-entry "$0" "network (tftp, nfs) (eth0)"
> + exit
> +fi
> +
> +ethact eth0
> +
> +path="/mnt/tftp"
> +
> +. /env/data/oftree
> +
> +global.bootm.image="${path}/${global.user}-linux-${global.hostname}"
> +#global.bootm.oftree="${path}/${global.user}-oftree-${global.hostname}"
> +nfsroot="/home/${global.user}/nfsroot/${global.hostname}"
> +bootargs-ip
> +global.linux.bootargs.dyn.root="root=/dev/nfs nfsroot=$nfsroot,v3,tcp"
> diff --git a/arch/arm/boards/highbank/env/boot/net-eth1 b/arch/arm/boards/highbank/env/boot/net-eth1
> new file mode 100644
> index 0000000..d9e9804
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot/net-eth1
> @@ -0,0 +1,18 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + boot-menu-add-entry "$0" "network (tftp, nfs) (eth1)"
> + exit
> +fi
> +
> +ethact eth1
> +
> +path="/mnt/tftp"
> +
> +. /env/data/oftree
> +
> +global.bootm.image="${path}/${global.user}-linux-${global.hostname}"
> +#global.bootm.oftree="${path}/${global.user}-oftree-${global.hostname}"
> +nfsroot="/home/${global.user}/nfsroot/${global.hostname}"
> +bootargs-ip
> +global.linux.bootargs.dyn.root="root=/dev/nfs nfsroot=$nfsroot,v3,tcp"
> diff --git a/arch/arm/boards/highbank/env/config b/arch/arm/boards/highbank/env/config
> deleted file mode 100644
> index 1bb2c49..0000000
> --- a/arch/arm/boards/highbank/env/config
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -#!/bin/sh
> -
> -# use 'dhcp' to do dhcp in barebox and in kernel
> -# use 'none' if you want to skip kernel ip autoconfiguration
> -ip=dhcp
> -global.dhcp.vendor_id=barebox-highbank
> -
> -# or set your networking parameters here
> -#eth0.ipaddr=a.b.c.d
> -#eth0.netmask=a.b.c.d
> -#eth0.gateway=a.b.c.d
> -#eth0.serverip=a.b.c.d
> -
> -# can be either 'nfs', 'tftp' or 'nor'
> -kernel_loc=tftp
> -# can be either 'net', 'nor' or 'initrd'
> -rootfs_loc=initrd
> -
> -# can be either 'jffs2' or 'ubifs'
> -rootfs_type=ubifs
> -rootfsimage=root.$rootfs_type
> -
> -kernelimage=zImage
> -#kernelimage=uImage
> -#kernelimage=Image
> -#kernelimage=Image.lzo
> -
> -autoboot_timeout=3
> -
> -bootargs="console=ttyAMA0,115200n8 CONSOLE=/dev/ttyAMA0"
> -
> -# set a fancy prompt (if support is compiled in)
> -PS1="\e[1;31m[barebox@\h]:\w\e[0m\n# "
> diff --git a/arch/arm/boards/highbank/env/config-board b/arch/arm/boards/highbank/env/config-board
> new file mode 100644
> index 0000000..a64d9e3
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/config-board
> @@ -0,0 +1,11 @@
> +#!/bin/sh
> +
> +# board defaults, do not change in running system. Change /env/config
> +# instead
> +
> +global.hostname=highbank
> +global.allow_color=true
> +global.autoboot_timeout=3
> +global.bootm.oftree="/dev/dtb"
> +global.linux.bootargs.base="console=ttyAMA0,115200n8 CONSOLE=/dev/ttyAMA0"
> +global.boot.default=/env/boot.d
> diff --git a/arch/arm/boards/highbank/env/data/oftree b/arch/arm/boards/highbank/env/data/oftree
> new file mode 100644
> index 0000000..9a94b31
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/data/oftree
> @@ -0,0 +1,4 @@
> +#!/bin/sh
> +
> +#device tree provided by the firmware
> +global.bootm.oftree="/dev/dtb"
> diff --git a/arch/arm/boards/highbank/env/bin/init_board b/arch/arm/boards/highbank/env/init/001-dtb-probe
> similarity index 100%
> rename from arch/arm/boards/highbank/env/bin/init_board
> rename to arch/arm/boards/highbank/env/init/001-dtb-probe
> diff --git a/arch/arm/boards/highbank/env/init/automount b/arch/arm/boards/highbank/env/init/automount
> new file mode 100644
> index 0000000..2c283c6
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/init/automount
> @@ -0,0 +1,27 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + init-menu-add-entry "$0" "Automountpoints"
> + exit
> +fi
> +
> +# automount tftp server based on $eth0.serverip
> +
> +mkdir -p /mnt/tftp
> +automount /mnt/tftp 'ifup eth0 && mount -t tftp $eth0.serverip /mnt/tftp'
> +
> +# SD card slot, boot partition
> +mkdir -p /mnt/mmc-boot
> +automount -d /mnt/mmc 'mount /dev/disk0.boot /mnt/mmc-boot'
> +
> +# SD card slot, first partition
> +mkdir -p /mnt/mmc
> +automount -d /mnt/mmc 'mount /dev/disk0.0 /mnt/mmc'
> +
> +# AHCI, boot partition
> +mkdir -p /mnt/ahci-boot
> +automount -d /mnt/ahci 'mount /dev/ata0.boot /mnt/ahci-boot'
> +
> +# AHCI, first partition
> +mkdir -p /mnt/ahci
> +automount -d /mnt/ahci 'mount /dev/ata0.0 /mnt/ahci'
> diff --git a/arch/arm/boards/highbank/env/init/ps1 b/arch/arm/boards/highbank/env/init/ps1
> new file mode 100644
> index 0000000..a94acc1
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/init/ps1
> @@ -0,0 +1,9 @@
> +#!/bin/sh
> +
> +/env/config
> +
> +if [ ${global.allow_color} = "true" ]; then
> + export PS1="\e[1;32mbarebox@\e[1;36m\h:\w\e[0m\n# "
> +else
> + export PS1="barebox@\h:\w\n# "
> +fi
> diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
> index 47c6405..9cfe539 100644
> --- a/arch/arm/mach-highbank/Kconfig
> +++ b/arch/arm/mach-highbank/Kconfig
> @@ -12,6 +12,7 @@ choice
>
> config MACH_HIGHBANK
> bool "Calxeda Highbank"
> + select HAVE_DEFAULT_ENVIRONMENT_NEW
>
> endchoice
>
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/1] highbank: switch to defaultenv-2
@ 2013-03-04 21:10 Jean-Christophe PLAGNIOL-VILLARD
2013-03-05 11:00 ` Sascha Hauer
0 siblings, 1 reply; 5+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-03-04 21:10 UTC (permalink / raw)
To: barebox; +Cc: Rob Herring
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
Hi,
depends on boot sequence support
Best Regards,
J.
arch/arm/boards/highbank/env/boot/ahci | 21 +++++++++++++
arch/arm/boards/highbank/env/boot/mmc | 21 +++++++++++++
arch/arm/boards/highbank/env/boot/net | 18 +++++++++++
arch/arm/boards/highbank/env/boot/net-eth1 | 18 +++++++++++
arch/arm/boards/highbank/env/config | 33 --------------------
arch/arm/boards/highbank/env/config-board | 11 +++++++
arch/arm/boards/highbank/env/data/oftree | 4 +++
.../env/{bin/init_board => init/001-dtb-probe} | 0
arch/arm/boards/highbank/env/init/automount | 27 ++++++++++++++++
arch/arm/boards/highbank/env/init/bootseq | 6 ++++
arch/arm/boards/highbank/env/init/ps1 | 9 ++++++
arch/arm/mach-highbank/Kconfig | 1 +
12 files changed, 136 insertions(+), 33 deletions(-)
create mode 100644 arch/arm/boards/highbank/env/boot/ahci
create mode 100644 arch/arm/boards/highbank/env/boot/mmc
create mode 100644 arch/arm/boards/highbank/env/boot/net
create mode 100644 arch/arm/boards/highbank/env/boot/net-eth1
delete mode 100644 arch/arm/boards/highbank/env/config
create mode 100644 arch/arm/boards/highbank/env/config-board
create mode 100644 arch/arm/boards/highbank/env/data/oftree
rename arch/arm/boards/highbank/env/{bin/init_board => init/001-dtb-probe} (100%)
create mode 100644 arch/arm/boards/highbank/env/init/automount
create mode 100644 arch/arm/boards/highbank/env/init/bootseq
create mode 100644 arch/arm/boards/highbank/env/init/ps1
diff --git a/arch/arm/boards/highbank/env/boot/ahci b/arch/arm/boards/highbank/env/boot/ahci
new file mode 100644
index 0000000..9a41366
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot/ahci
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "AHCI (part 0 or boot if UEFI)"
+ exit
+fi
+
+path="/mnt/ahci"
+
+global.bootm.image="${path}/vmlinuz"
+
+. /env/data/oftree
+
+oftree=${path}/oftree
+if [ -f $oftree ]; then
+ global.bootm.oftree="$oftree"
+fi
+
+# The rootdevice may actually be mmcblk1p2 if a card
+# is inserted to the back MMC slot
+global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2"
diff --git a/arch/arm/boards/highbank/env/boot/mmc b/arch/arm/boards/highbank/env/boot/mmc
new file mode 100644
index 0000000..43a04b5
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot/mmc
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "MMC slot"
+ exit
+fi
+
+path="/mnt/mmc"
+
+global.bootm.image="${path}/zimage"
+
+. /env/data/oftree
+
+oftree=${path}/oftree
+if [ -f $oftree ]; then
+ global.bootm.oftree="$oftree"
+fi
+
+# The rootdevice may actually be mmcblk1p2 if a card
+# is inserted to the back MMC slot
+global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2"
diff --git a/arch/arm/boards/highbank/env/boot/net b/arch/arm/boards/highbank/env/boot/net
new file mode 100644
index 0000000..80862cd
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot/net
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "network (tftp, nfs) (eth0)"
+ exit
+fi
+
+ethact eth0
+
+path="/mnt/tftp"
+
+. /env/data/oftree
+
+global.bootm.image="${path}/${global.user}-linux-${global.hostname}"
+#global.bootm.oftree="${path}/${global.user}-oftree-${global.hostname}"
+nfsroot="/home/${global.user}/nfsroot/${global.hostname}"
+bootargs-ip
+global.linux.bootargs.dyn.root="root=/dev/nfs nfsroot=$nfsroot,v3,tcp"
diff --git a/arch/arm/boards/highbank/env/boot/net-eth1 b/arch/arm/boards/highbank/env/boot/net-eth1
new file mode 100644
index 0000000..d9e9804
--- /dev/null
+++ b/arch/arm/boards/highbank/env/boot/net-eth1
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "network (tftp, nfs) (eth1)"
+ exit
+fi
+
+ethact eth1
+
+path="/mnt/tftp"
+
+. /env/data/oftree
+
+global.bootm.image="${path}/${global.user}-linux-${global.hostname}"
+#global.bootm.oftree="${path}/${global.user}-oftree-${global.hostname}"
+nfsroot="/home/${global.user}/nfsroot/${global.hostname}"
+bootargs-ip
+global.linux.bootargs.dyn.root="root=/dev/nfs nfsroot=$nfsroot,v3,tcp"
diff --git a/arch/arm/boards/highbank/env/config b/arch/arm/boards/highbank/env/config
deleted file mode 100644
index 1bb2c49..0000000
--- a/arch/arm/boards/highbank/env/config
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/sh
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
-global.dhcp.vendor_id=barebox-highbank
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp' or 'nor'
-kernel_loc=tftp
-# can be either 'net', 'nor' or 'initrd'
-rootfs_loc=initrd
-
-# can be either 'jffs2' or 'ubifs'
-rootfs_type=ubifs
-rootfsimage=root.$rootfs_type
-
-kernelimage=zImage
-#kernelimage=uImage
-#kernelimage=Image
-#kernelimage=Image.lzo
-
-autoboot_timeout=3
-
-bootargs="console=ttyAMA0,115200n8 CONSOLE=/dev/ttyAMA0"
-
-# set a fancy prompt (if support is compiled in)
-PS1="\e[1;31m[barebox@\h]:\w\e[0m\n# "
diff --git a/arch/arm/boards/highbank/env/config-board b/arch/arm/boards/highbank/env/config-board
new file mode 100644
index 0000000..a64d9e3
--- /dev/null
+++ b/arch/arm/boards/highbank/env/config-board
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+# board defaults, do not change in running system. Change /env/config
+# instead
+
+global.hostname=highbank
+global.allow_color=true
+global.autoboot_timeout=3
+global.bootm.oftree="/dev/dtb"
+global.linux.bootargs.base="console=ttyAMA0,115200n8 CONSOLE=/dev/ttyAMA0"
+global.boot.default=/env/boot.d
diff --git a/arch/arm/boards/highbank/env/data/oftree b/arch/arm/boards/highbank/env/data/oftree
new file mode 100644
index 0000000..9a94b31
--- /dev/null
+++ b/arch/arm/boards/highbank/env/data/oftree
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+#device tree provided by the firmware
+global.bootm.oftree="/dev/dtb"
diff --git a/arch/arm/boards/highbank/env/bin/init_board b/arch/arm/boards/highbank/env/init/001-dtb-probe
similarity index 100%
rename from arch/arm/boards/highbank/env/bin/init_board
rename to arch/arm/boards/highbank/env/init/001-dtb-probe
diff --git a/arch/arm/boards/highbank/env/init/automount b/arch/arm/boards/highbank/env/init/automount
new file mode 100644
index 0000000..2c283c6
--- /dev/null
+++ b/arch/arm/boards/highbank/env/init/automount
@@ -0,0 +1,27 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "Automountpoints"
+ exit
+fi
+
+# automount tftp server based on $eth0.serverip
+
+mkdir -p /mnt/tftp
+automount /mnt/tftp 'ifup eth0 && mount -t tftp $eth0.serverip /mnt/tftp'
+
+# SD card slot, boot partition
+mkdir -p /mnt/mmc-boot
+automount -d /mnt/mmc 'mount /dev/disk0.boot /mnt/mmc-boot'
+
+# SD card slot, first partition
+mkdir -p /mnt/mmc
+automount -d /mnt/mmc 'mount /dev/disk0.0 /mnt/mmc'
+
+# AHCI, boot partition
+mkdir -p /mnt/ahci-boot
+automount -d /mnt/ahci 'mount /dev/ata0.boot /mnt/ahci-boot'
+
+# AHCI, first partition
+mkdir -p /mnt/ahci
+automount -d /mnt/ahci 'mount /dev/ata0.0 /mnt/ahci'
diff --git a/arch/arm/boards/highbank/env/init/bootseq b/arch/arm/boards/highbank/env/init/bootseq
new file mode 100644
index 0000000..7a76759
--- /dev/null
+++ b/arch/arm/boards/highbank/env/init/bootseq
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+mkdir /env/boot.d
+ln /env/boot/ahci /env/boot.d/010
+ln /env/boot/mmc /env/boot.d/011
+ln /env/boot/net /env/boot.d/012
diff --git a/arch/arm/boards/highbank/env/init/ps1 b/arch/arm/boards/highbank/env/init/ps1
new file mode 100644
index 0000000..a94acc1
--- /dev/null
+++ b/arch/arm/boards/highbank/env/init/ps1
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+/env/config
+
+if [ ${global.allow_color} = "true" ]; then
+ export PS1="\e[1;32mbarebox@\e[1;36m\h:\w\e[0m\n# "
+else
+ export PS1="barebox@\h:\w\n# "
+fi
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 47c6405..9cfe539 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -12,6 +12,7 @@ choice
config MACH_HIGHBANK
bool "Calxeda Highbank"
+ select HAVE_DEFAULT_ENVIRONMENT_NEW
endchoice
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH 1/1] highbank: switch to defaultenv-2
2013-03-04 21:10 Jean-Christophe PLAGNIOL-VILLARD
@ 2013-03-05 11:00 ` Sascha Hauer
2013-03-05 12:31 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 1 reply; 5+ messages in thread
From: Sascha Hauer @ 2013-03-05 11:00 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox, Rob Herring
On Mon, Mar 04, 2013 at 10:10:30PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Cc: Rob Herring <rob.herring@calxeda.com>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>
> diff --git a/arch/arm/boards/highbank/env/boot/ahci b/arch/arm/boards/highbank/env/boot/ahci
> new file mode 100644
> index 0000000..9a41366
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot/ahci
> @@ -0,0 +1,21 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + boot-menu-add-entry "$0" "AHCI (part 0 or boot if UEFI)"
> + exit
> +fi
> +
> +path="/mnt/ahci"
> +
> +global.bootm.image="${path}/vmlinuz"
> +
> +. /env/data/oftree
> +
> +oftree=${path}/oftree
> +if [ -f $oftree ]; then
> + global.bootm.oftree="$oftree"
> +fi
> +
> +# The rootdevice may actually be mmcblk1p2 if a card
> +# is inserted to the back MMC slot
This seems to copy copy pasted from the Efika Smartbook and I doubt this
is correct for highbank.
> +global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2"
The entry is named ahci and it sets the root device to mmcblk?
> diff --git a/arch/arm/boards/highbank/env/boot/mmc b/arch/arm/boards/highbank/env/boot/mmc
> new file mode 100644
> index 0000000..43a04b5
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot/mmc
> @@ -0,0 +1,21 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + boot-menu-add-entry "$0" "MMC slot"
> + exit
> +fi
> +
> +path="/mnt/mmc"
> +
> +global.bootm.image="${path}/zimage"
> +
> +. /env/data/oftree
> +
> +oftree=${path}/oftree
> +if [ -f $oftree ]; then
> + global.bootm.oftree="$oftree"
> +fi
> +
> +# The rootdevice may actually be mmcblk1p2 if a card
> +# is inserted to the back MMC slot
ditto wrong
> +global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2"
> diff --git a/arch/arm/boards/highbank/env/boot/net b/arch/arm/boards/highbank/env/boot/net
> new file mode 100644
> index 0000000..80862cd
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot/net
> @@ -0,0 +1,18 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + boot-menu-add-entry "$0" "network (tftp, nfs) (eth0)"
> + exit
> +fi
> +
> +ethact eth0
> +
> +path="/mnt/tftp"
> +
> +. /env/data/oftree
> +
> +global.bootm.image="${path}/${global.user}-linux-${global.hostname}"
> +#global.bootm.oftree="${path}/${global.user}-oftree-${global.hostname}"
> +nfsroot="/home/${global.user}/nfsroot/${global.hostname}"
> +bootargs-ip
> +global.linux.bootargs.dyn.root="root=/dev/nfs nfsroot=$nfsroot,v3,tcp"
> diff --git a/arch/arm/boards/highbank/env/boot/net-eth1 b/arch/arm/boards/highbank/env/boot/net-eth1
> new file mode 100644
> index 0000000..d9e9804
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/boot/net-eth1
> @@ -0,0 +1,18 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + boot-menu-add-entry "$0" "network (tftp, nfs) (eth1)"
> + exit
> +fi
> +
> +ethact eth1
> +
> +path="/mnt/tftp"
> +
> +. /env/data/oftree
> +
> +global.bootm.image="${path}/${global.user}-linux-${global.hostname}"
> +#global.bootm.oftree="${path}/${global.user}-oftree-${global.hostname}"
> +nfsroot="/home/${global.user}/nfsroot/${global.hostname}"
> +bootargs-ip
> +global.linux.bootargs.dyn.root="root=/dev/nfs nfsroot=$nfsroot,v3,tcp"
> diff --git a/arch/arm/boards/highbank/env/config-board b/arch/arm/boards/highbank/env/config-board
> new file mode 100644
> index 0000000..a64d9e3
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/config-board
> @@ -0,0 +1,11 @@
> +#!/bin/sh
> +
> +# board defaults, do not change in running system. Change /env/config
> +# instead
> +
> +global.hostname=highbank
> +global.allow_color=true
> +global.autoboot_timeout=3
> +global.bootm.oftree="/dev/dtb"
> +global.linux.bootargs.base="console=ttyAMA0,115200n8 CONSOLE=/dev/ttyAMA0"
> +global.boot.default=/env/boot.d
> diff --git a/arch/arm/boards/highbank/env/data/oftree b/arch/arm/boards/highbank/env/data/oftree
> new file mode 100644
> index 0000000..9a94b31
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/data/oftree
> @@ -0,0 +1,4 @@
> +#!/bin/sh
> +
> +#device tree provided by the firmware
> +global.bootm.oftree="/dev/dtb"
> diff --git a/arch/arm/boards/highbank/env/bin/init_board b/arch/arm/boards/highbank/env/init/001-dtb-probe
> similarity index 100%
> rename from arch/arm/boards/highbank/env/bin/init_board
> rename to arch/arm/boards/highbank/env/init/001-dtb-probe
> diff --git a/arch/arm/boards/highbank/env/init/bootseq b/arch/arm/boards/highbank/env/init/bootseq
> new file mode 100644
> index 0000000..7a76759
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/init/bootseq
> @@ -0,0 +1,6 @@
> +#!/bin/sh
> +
> +mkdir /env/boot.d
> +ln /env/boot/ahci /env/boot.d/010
> +ln /env/boot/mmc /env/boot.d/011
> +ln /env/boot/net /env/boot.d/012
Doesn't this give ugly errors when the files exist already on a persistent environment?
Also, isn't a bootsequence supposed to be changeable?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH 1/1] highbank: switch to defaultenv-2
2013-03-05 11:00 ` Sascha Hauer
@ 2013-03-05 12:31 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 0 replies; 5+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-03-05 12:31 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox, Rob Herring
On 12:00 Tue 05 Mar , Sascha Hauer wrote:
> On Mon, Mar 04, 2013 at 10:10:30PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > Cc: Rob Herring <rob.herring@calxeda.com>
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> > ---
> >
> > diff --git a/arch/arm/boards/highbank/env/boot/ahci b/arch/arm/boards/highbank/env/boot/ahci
> > new file mode 100644
> > index 0000000..9a41366
> > --- /dev/null
> > +++ b/arch/arm/boards/highbank/env/boot/ahci
> > @@ -0,0 +1,21 @@
> > +#!/bin/sh
> > +
> > +if [ "$1" = menu ]; then
> > + boot-menu-add-entry "$0" "AHCI (part 0 or boot if UEFI)"
> > + exit
> > +fi
> > +
> > +path="/mnt/ahci"
> > +
> > +global.bootm.image="${path}/vmlinuz"
> > +
> > +. /env/data/oftree
> > +
> > +oftree=${path}/oftree
> > +if [ -f $oftree ]; then
> > + global.bootm.oftree="$oftree"
> > +fi
> > +
> > +# The rootdevice may actually be mmcblk1p2 if a card
> > +# is inserted to the back MMC slot
>
> This seems to copy copy pasted from the Efika Smartbook and I doubt this
> is correct for highbank.
>
> > +global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2"
>
> The entry is named ahci and it sets the root device to mmcblk?
yeah
>
> > diff --git a/arch/arm/boards/highbank/env/boot/mmc b/arch/arm/boards/highbank/env/boot/mmc
> > new file mode 100644
> > index 0000000..43a04b5
> > --- /dev/null
> > +++ b/arch/arm/boards/highbank/env/boot/mmc
> > @@ -0,0 +1,21 @@
> > +#!/bin/sh
> > +
> > +if [ "$1" = menu ]; then
> > + boot-menu-add-entry "$0" "MMC slot"
> > + exit
> > +fi
> > +
> > +path="/mnt/mmc"
> > +
> > +global.bootm.image="${path}/zimage"
> > +
> > +. /env/data/oftree
> > +
> > +oftree=${path}/oftree
> > +if [ -f $oftree ]; then
> > + global.bootm.oftree="$oftree"
> > +fi
> > +
> > +# The rootdevice may actually be mmcblk1p2 if a card
> > +# is inserted to the back MMC slot
> > diff --git a/arch/arm/boards/highbank/env/data/oftree b/arch/arm/boards/highbank/env/data/oftree
> > new file mode 100644
> > index 0000000..9a94b31
> > --- /dev/null
> > +++ b/arch/arm/boards/highbank/env/data/oftree
> > @@ -0,0 +1,4 @@
> > +#!/bin/sh
> > +
> > +#device tree provided by the firmware
> > +global.bootm.oftree="/dev/dtb"
> > diff --git a/arch/arm/boards/highbank/env/bin/init_board b/arch/arm/boards/highbank/env/init/001-dtb-probe
> > similarity index 100%
> > rename from arch/arm/boards/highbank/env/bin/init_board
> > rename to arch/arm/boards/highbank/env/init/001-dtb-probe
> > diff --git a/arch/arm/boards/highbank/env/init/bootseq b/arch/arm/boards/highbank/env/init/bootseq
> > new file mode 100644
> > index 0000000..7a76759
> > --- /dev/null
> > +++ b/arch/arm/boards/highbank/env/init/bootseq
> > @@ -0,0 +1,6 @@
> > +#!/bin/sh
> > +
> > +mkdir /env/boot.d
> > +ln /env/boot/ahci /env/boot.d/010
> > +ln /env/boot/mmc /env/boot.d/011
> > +ln /env/boot/net /env/boot.d/012
>
> Doesn't this give ugly errors when the files exist already on a persistent environment?
>
> Also, isn't a bootsequence supposed to be changeable?
no this is the default one fixed
via IMPI you will be able to select deferent boot sequence
on highbank you will control boot sequence via IMPI
but we can add them in the env as the envfs support the symlink instead of
create them on the fly
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-04-09 7:06 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-04-06 16:31 [PATCH 1/1] highbank: switch to defaultenv-2 Jean-Christophe PLAGNIOL-VILLARD
2013-04-09 7:06 ` Sascha Hauer
-- strict thread matches above, loose matches on Subject: below --
2013-03-04 21:10 Jean-Christophe PLAGNIOL-VILLARD
2013-03-05 11:00 ` Sascha Hauer
2013-03-05 12:31 ` Jean-Christophe PLAGNIOL-VILLARD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox