From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1UT69p-0007XV-2O for barebox@lists.infradead.org; Fri, 19 Apr 2013 07:54:57 +0000 From: Juergen Beisert Date: Fri, 19 Apr 2013 09:52:40 +0200 References: <1366356610-16536-1-git-send-email-mkl@pengutronix.de> In-Reply-To: <1366356610-16536-1-git-send-email-mkl@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline Message-Id: <201304190952.40815.jbe@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH] ARM i.MX28: make chip reset via reset pin work again To: barebox@lists.infradead.org Cc: Steffen Trumtrar Marc Kleine-Budde wrote: > Since commit: > > 2ccd451 ARM i.MX28: change default watchdog reset method > > the external reset via the reset pin is broken. That commit overwrites the > HW_CLKCTRL_RESET register with only WDOG_POR_DISABLE set, which results in > disabling the external reset. > > This patch sets the EXTERNAL_RESET_ENABLE bit, too. While there clean up > the name of the WDOG_POR_DISABLE define. > > Cc: Steffen Trumtrar > Signed-off-by: Marc Kleine-Budde > --- > arch/arm/mach-mxs/soc-imx28.c | 9 ++++++--- > 1 file changed, 6 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/mach-mxs/soc-imx28.c b/arch/arm/mach-mxs/soc-imx28.c > index 8972a3d..bcf4bcc 100644 > --- a/arch/arm/mach-mxs/soc-imx28.c > +++ b/arch/arm/mach-mxs/soc-imx28.c > @@ -20,8 +20,9 @@ > #include > > #define HW_CLKCTRL_RESET 0x1e0 > -# define HW_CLKCTRL_RESET_CHIP (1 << 1) > -#define HW_CLKCTRL_WDOG_POR_DISABLE (1 << 5) > +#define HW_CLKCTRL_RESET_CHIP (1 << 1) > +#define HW_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE (1 << 4) > +#define HW_CLKCTRL_RESET_WDOG_POR_DISABLE (1 << 5) > > /* Reset the full i.MX28 SoC via a chipset feature */ > void __noreturn reset_cpu(unsigned long addr) > @@ -44,7 +45,9 @@ static int imx28_init(void) > * powered via battery, then a WDT reset powers the chip down instead > * of resetting it. Use a software reset only. > */ > - writel(HW_CLKCTRL_WDOG_POR_DISABLE, IMX_CCM_BASE + HW_CLKCTRL_RESET); > + writel(HW_CLKCTRL_RESET_WDOG_POR_DISABLE | > + HW_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE, > + IMX_CCM_BASE + HW_CLKCTRL_RESET); IMHO forcing the HW_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE bit set is even as bad as reset it with the previous patch. We should left this bit untouched instead. jbe -- Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | http://www.pengutronix.de/ | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox