From: "antonynpavlov@gmail.com" <antonynpavlov@gmail.com>
To: Oleksij Rempel <linux@rempel-privat.de>
Cc: barebox@lists.infradead.org,
Oleksij Rempel <bug-track@fisher-privat.net>
Subject: Re: [PATCH 2/3][WiP] add atheros MIPS based ar2313 WiSoC chips
Date: Thu, 25 Apr 2013 18:54:09 +0400 [thread overview]
Message-ID: <20130425185409.f8a3b68b1aa6eca504293fea@gmail.com> (raw)
In-Reply-To: <1366621553-8947-1-git-send-email-linux@rempel-privat.de>
On Mon, 22 Apr 2013 11:05:53 +0200
Oleksij Rempel <linux@rempel-privat.de> wrote:
> From: Oleksij Rempel <bug-track@fisher-privat.net>
>
> ---
> arch/mips/Kconfig | 10 +
> arch/mips/Makefile | 3 +
> arch/mips/boards/netgear-wg102/Kconfig | 6 +
> arch/mips/boards/netgear-wg102/Makefile | 1 +
> arch/mips/boards/netgear-wg102/config.h | 15 +
> arch/mips/boards/netgear-wg102/netgear-wg102.dox | 38 +++
> arch/mips/boards/netgear-wg102/serial.c | 40 +++
> arch/mips/mach-ar531x/Kconfig | 17 ++
> arch/mips/mach-ar531x/Makefile | 3 +
> arch/mips/mach-ar531x/ar531x.c | 204 ++++++++++++++
> arch/mips/mach-ar531x/board.c | 182 ++++++++++++
> .../mach-ar531x/include/mach/ar231x_platform.h | 82 ++++++
> arch/mips/mach-ar531x/include/mach/ar531x_regs.h | 295 ++++++++++++++++++++
> arch/mips/mach-ar531x/include/mach/debug_ll.h | 31 ++
> arch/mips/mach-ar531x/lowlevel_init.S | 83 ++++++
> arch/mips/mach-ar531x/mach-ar531x.dox | 7 +
> 16 files changed, 1017 insertions(+)
> create mode 100644 arch/mips/boards/netgear-wg102/Kconfig
> create mode 100644 arch/mips/boards/netgear-wg102/Makefile
> create mode 100644 arch/mips/boards/netgear-wg102/config.h
> create mode 100644 arch/mips/boards/netgear-wg102/netgear-wg102.dox
> create mode 100644 arch/mips/boards/netgear-wg102/serial.c
> create mode 100644 arch/mips/mach-ar531x/Kconfig
> create mode 100644 arch/mips/mach-ar531x/Makefile
> create mode 100644 arch/mips/mach-ar531x/ar531x.c
> create mode 100644 arch/mips/mach-ar531x/board.c
> create mode 100644 arch/mips/mach-ar531x/include/mach/ar231x_platform.h
> create mode 100644 arch/mips/mach-ar531x/include/mach/ar531x_regs.h
> create mode 100644 arch/mips/mach-ar531x/include/mach/debug_ll.h
> create mode 100644 arch/mips/mach-ar531x/lowlevel_init.S
> create mode 100644 arch/mips/mach-ar531x/mach-ar531x.dox
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 947edcf..e3b425f 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -37,6 +37,15 @@ config MACH_MIPS_MALTA
> select SYS_SUPPORTS_BIG_ENDIAN
> select HAS_DEBUG_LL
>
> +config MACH_MIPS_AR531X
> + bool "Atheros ar531x-based boards"
> + select CSRC_R4K_LIB
> + select DRIVER_SERIAL_NS16550
> + select SYS_HAS_CPU_MIPS32_R1
> + select SYS_SUPPORTS_32BIT_KERNEL
> + select SYS_SUPPORTS_BIG_ENDIAN
> + select HAS_DEBUG_LL
> +
> config MACH_MIPS_BCM47XX
> bool "Broadcom BCM47xx-based boards"
> select CSRC_R4K_LIB
> @@ -56,6 +65,7 @@ config MACH_MIPS_XBURST
> endchoice
>
> source arch/mips/mach-malta/Kconfig
> +source arch/mips/mach-ar531x/Kconfig
> source arch/mips/mach-bcm47xx/Kconfig
> source arch/mips/mach-xburst/Kconfig
>
> diff --git a/arch/mips/Makefile b/arch/mips/Makefile
> index 3c565a4..a79ffdb 100644
> --- a/arch/mips/Makefile
> +++ b/arch/mips/Makefile
> @@ -72,6 +72,9 @@ LDFLAGS_barebox += -nostdlib
> machine-$(CONFIG_MACH_MIPS_MALTA) := malta
> board-$(CONFIG_BOARD_QEMU_MALTA) := qemu-malta
>
> +machine-$(CONFIG_MACH_MIPS_AR531X) := ar531x
> +board-$(CONFIG_BOARD_NETGEAR_WG102) := netgear-wg102
> +
> machine-$(CONFIG_MACH_MIPS_BCM47XX) := bcm47xx
> board-$(CONFIG_BOARD_DLINK_DIR320) := dlink-dir-320
>
> diff --git a/arch/mips/boards/netgear-wg102/Kconfig b/arch/mips/boards/netgear-wg102/Kconfig
> new file mode 100644
> index 0000000..ceca6de
> --- /dev/null
> +++ b/arch/mips/boards/netgear-wg102/Kconfig
> @@ -0,0 +1,6 @@
> +if BOARD_NETGEAR_WG102
> +
> +config BOARDINFO
> + default "Netgear WG102"
> +
> +endif
> diff --git a/arch/mips/boards/netgear-wg102/Makefile b/arch/mips/boards/netgear-wg102/Makefile
> new file mode 100644
> index 0000000..ff1a655
> --- /dev/null
> +++ b/arch/mips/boards/netgear-wg102/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_DRIVER_SERIAL_NS16550) += serial.o
> diff --git a/arch/mips/boards/netgear-wg102/config.h b/arch/mips/boards/netgear-wg102/config.h
> new file mode 100644
> index 0000000..db5f011
> --- /dev/null
> +++ b/arch/mips/boards/netgear-wg102/config.h
> @@ -0,0 +1,15 @@
> +/*
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + *
> + */
> +
> +/* nothing special yet */
> diff --git a/arch/mips/boards/netgear-wg102/netgear-wg102.dox b/arch/mips/boards/netgear-wg102/netgear-wg102.dox
> new file mode 100644
> index 0000000..d0f5869
> --- /dev/null
> +++ b/arch/mips/boards/netgear-wg102/netgear-wg102.dox
> @@ -0,0 +1,38 @@
> +/** @page dlink_dir_320 D-Link DIR-320 wireless router
Your board is not a replica of DIR-320, so
please change the contents of this file.
> +The router has
> +@li BCM5354 SoC;
> +@li 32 MiB SDRAM;
> +@li 4 MiB NOR type Flash Memory;
> +@li RS232 serial interface (LV-TTL levels on board!);
> +@li 1xUSB interface;
> +@li 4 + 1 ethernet interfaces;
> +@li 802.11b/g (WiFi) interface;
> +@li JTAG interface;
> +@li 5 LEDs;
> +@li 2 buttons.
> +
> +The router uses CFE as firmware.
> +
> +Barebox can be started from CFE using tftp.
> +You must setup tftp-server on host 192.168.0.1.
> +Put your barebox.bin to tftp-server directory
> +(usual /tftpboot or /srv/tftp).
> +Connect your DIR-320 to your tftp-server network via
> +one of four <LAN> sockets.
> +
> +Next, setup network on DIR-320 and run barebox.bin, e.g.:
> +@verbatim
> +CFE> ifconfig eth0 -addr=192.168.0.99
> +CFE> boot -tftp -addr=a0800000 -raw 192.168.0.1:barebox.bin
> +@endverbatim
> +
> +DIR-320 links:
> +@li http://www.dlink.com.au/products/?pid=768
> +@li http://wiki.openwrt.org/toh/d-link/dir-320
> +
> +CFE links:
> +@li http://www.broadcom.com/support/communications_processors/downloads.php#cfe
> +@li http://www.linux-mips.org/wiki/CFE
> +
> +*/
> diff --git a/arch/mips/boards/netgear-wg102/serial.c b/arch/mips/boards/netgear-wg102/serial.c
> new file mode 100644
> index 0000000..e05da34
> --- /dev/null
> +++ b/arch/mips/boards/netgear-wg102/serial.c
> @@ -0,0 +1,40 @@
> +/*
> + * Copyright (C) 2011 Antony Pavlov <antonynpavlov@gmail.com>
> + *
> + * This file is part of barebox.
> + * See file CREDITS for list of people who contributed to this project.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <common.h>
> +#include <types.h>
> +#include <driver.h>
> +#include <init.h>
> +#include <ns16550.h>
> +#include <io.h>
> +#include <asm/common.h>
> +#if 0
> +static struct NS16550_plat serial_plat = {
> + .clock = 9100,
> + .shift = 0,
> +};
> +
> +static int dir320_console_init(void)
> +{
> + /* Register the serial port */
> + add_ns16550_device(DEVICE_ID_DYNAMIC, DEBUG_LL_UART_ADDR, 8,
> + IORESOURCE_MEM_8BIT, &serial_plat);
> +
> + return 0;
> +}
> +console_initcall(dir320_console_init);
> +#endif
You have commented this file (serial.c).
You can move ar531x_console_init() here. Or you can drop it completely.
> diff --git a/arch/mips/mach-ar531x/Kconfig b/arch/mips/mach-ar531x/Kconfig
> new file mode 100644
> index 0000000..78d095b
> --- /dev/null
> +++ b/arch/mips/mach-ar531x/Kconfig
> @@ -0,0 +1,17 @@
> +if MACH_MIPS_AR531X
> +
> +config ARCH_TEXT_BASE
> + hex
> + default 0xa0800000
> +
> +choice
> + prompt "Board type"
> +
> +config BOARD_NETGEAR_WG102
> + bool "Netgear WG102"
> +
> +endchoice
> +
> +source arch/mips/boards/netgear-wg102/Kconfig
> +
> +endif
> diff --git a/arch/mips/mach-ar531x/Makefile b/arch/mips/mach-ar531x/Makefile
> new file mode 100644
> index 0000000..00c5b3e
> --- /dev/null
> +++ b/arch/mips/mach-ar531x/Makefile
> @@ -0,0 +1,3 @@
> +obj-y += ar531x.o
> +obj-y += lowlevel_init.o
> +obj-y += board.o
> diff --git a/arch/mips/mach-ar531x/ar531x.c b/arch/mips/mach-ar531x/ar531x.c
> new file mode 100644
> index 0000000..7a3fc97
> --- /dev/null
> +++ b/arch/mips/mach-ar531x/ar531x.c
> @@ -0,0 +1,204 @@
> +/*
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License. See the file "COPYING" in the main directory of this archive
> + * for more details.
> + *
> + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
> + * Copyright (C) 2006 FON Technology, SL.
> + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
> + * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
> + */
> +
> +/*
> + * Platform devices for Atheros SoCs
> + */
> +
> +
> +#include <common.h>
> +#include <io.h>
> +#include <mach/ar531x_regs.h>
> +#include <mach/ar231x_platform.h>
> +#include <mach/debug_ll.h>
> +#include <ns16550.h>
> +#include <init.h>
> +#include <driver.h>
> +#include <linux/types.h>
> +
> +struct ar231x_board_data ar231x_board;
> +
> +void __noreturn reset_cpu(ulong addr)
> +{
> + printf("reseting cpu\n");
> + __raw_writel(0x10000,
> + (char *)KSEG1ADDR(AR531X_WD_TIMER));
> + __raw_writel(AR531X_WD_CTRL_RESET,
> + (char *)KSEG1ADDR(AR531X_WD_CTRL));
> + while(1);
You can use "unreachable();" instead of "while(1);" here.
> +}
> +EXPORT_SYMBOL(reset_cpu);
> +
> +/*
> + * This table is indexed by bits 5..4 of the CLOCKCTL1 register
> + * to determine the predevisor value.
> + */
> +static int CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
> +
> +
> +static unsigned int
> +ar5312_cpu_frequency(void)
> +{
> + unsigned int predivide_mask, predivide_shift;
> + unsigned int multiplier_mask, multiplier_shift;
> + unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
> + unsigned int doubler_mask;
> + u32 devid;
> +
> + devid = __raw_readl((char *)KSEG1ADDR(AR531X_REV));
> + devid &= AR531X_REV_MAJ;
> + devid >>= AR531X_REV_MAJ_S;
> + if (devid == AR531X_REV_MAJ_AR2313) {
> + predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
> + predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
> + multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
> + multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
> + doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
> + } else { /* AR5312 and AR2312 */
> + predivide_mask = AR2312_CLOCKCTL1_PREDIVIDE_MASK;
> + predivide_shift = AR2312_CLOCKCTL1_PREDIVIDE_SHIFT;
> + multiplier_mask = AR2312_CLOCKCTL1_MULTIPLIER_MASK;
> + multiplier_shift = AR2312_CLOCKCTL1_MULTIPLIER_SHIFT;
> + doubler_mask = AR2312_CLOCKCTL1_DOUBLER_MASK;
> + }
> +
> +
> + /*
> + * Clocking is derived from a fixed 40MHz input clock.
> + *
> + * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
> + * sysFreq = cpuFreq / 4 (used for APB clock, serial,
> + * flash, Timer, Watchdog Timer)
> + *
> + * cntFreq = cpuFreq / 2 (use for CPU count/compare)
> + *
> + * So, for example, with a PLL multiplier of 5, we have
> + *
> + * cpuFreq = 200MHz
> + * sysFreq = 50MHz
> + * cntFreq = 100MHz
> + *
> + * We compute the CPU frequency, based on PLL settings.
> + */
> +
> + clockCtl1 = __raw_readl((char *)KSEG1ADDR(AR5312_CLOCKCTL1));
> + preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
> + preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
> + multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
> +
> + if (clockCtl1 & doubler_mask) {
> + multiplier = multiplier << 1;
> + }
> + return (40000000 / preDivisor) * multiplier;
> +}
> +
> +static unsigned int
> +ar5312_sys_frequency(void)
> +{
> + return ar5312_cpu_frequency() / 4;
> +}
> +
> +/*
> + * shutdown watchdog
> + */
> +static int watchdog_init(void)
> +{
> + printf("Disable watchdog.\n");
> + __raw_writeb(AR531X_WD_CTRL_IGNORE_EXPIRATION,
> + (char *)KSEG1ADDR(AR531X_WD_CTRL));
> + return 0;
> +}
> +
> +static void flash_init(void)
> +{
> + u32 flash_size;
> + u32 ctl, old_ctl;
> +
> + /*
> + * Configure flash bank 0.
> + * Assume 8M window size. Flash will be aliased if it's smaller
> + */
> + old_ctl = __raw_readl((char *)KSEG1ADDR(AR531X_FLASHCTL0));
> + ctl = FLASHCTL_E | FLASHCTL_AC_8M | FLASHCTL_RBLE |
> + (0x01 << FLASHCTL_IDCY_S) |
> + (0x07 << FLASHCTL_WST1_S) |
> + (0x07 << FLASHCTL_WST2_S) | (old_ctl & FLASHCTL_MW);
> +
> + __raw_writel(ctl, (char *)KSEG1ADDR(AR531X_FLASHCTL0));
> + /* Disable other flash banks */
> + old_ctl = __raw_readl((char *)KSEG1ADDR(AR531X_FLASHCTL1));
> + __raw_writel(old_ctl & ~(FLASHCTL_E | FLASHCTL_AC),
> + (char *)KSEG1ADDR(AR531X_FLASHCTL1));
> +
> + old_ctl = __raw_readl((char *)KSEG1ADDR(AR531X_FLASHCTL2));
> + __raw_writel(old_ctl & ~(FLASHCTL_E | FLASHCTL_AC),
> + (char *)KSEG1ADDR(AR531X_FLASHCTL2));
> +
> + /* TODO: precompile option for different sices */
> + /* find out the flash size */
> + //__raw_writel(0x000d3ce1, (char *)KSEG1ADDR(AR531X_FLASHCTL));
> + //__raw_readl((char *)KSEG1ADDR(AR531X_FLASHCTL));
> + flash_size = 0x400000;
> + /* check the bus width? cfi routine seems to detect it automatically */
> + ar231x_find_config((char *)KSEG1ADDR(AR531X_FLASH + flash_size));
> +// add_cfi_flash_device(0, KSEG1ADDR(AR531X_FLASH), flash_size, 0);
> +}
> +
> +static int ether_init(void)
> +{
> + struct ar231x_eth_platform_data *eth = &ar231x_board.eth_pdata;
> + //TODO: check board config to find which eth card we should enable
> + //now we will take some cart
> + eth->base_eth = KSEG1ADDR(AR531X_ENET1);
> + eth->reset_mac = AR531X_RESET_ENET1;
> + eth->reset_phy = AR531X_RESET_EPHY0;
> + eth->base_reset = KSEG1ADDR(AR531X_RESET);
> + eth->base_phy = KSEG1ADDR(AR531X_ENET0);
> + eth->mac = ar231x_board.config->enet0_mac;
> +
> + // and some base addresses here
> + add_generic_device("ar231x_eth", 0, NULL,
> + (resource_size_t)KSEG1ADDR(AR531X_ENET0), 0x1000, IORESOURCE_MEM, eth);
> + return 0;
> +}
> +
> +static int platform_init(void)
> +{
> + watchdog_init();
> + flash_init();
> + ether_init();
> + return 0;
> +}
> +late_initcall(platform_init);
> +
> +static struct NS16550_plat serial_plat = {
> + .shift = AR531X_UART_SHIFT,
> +};
> +
> +static int ar531x_console_init(void)
> +{
> + u32 reset;
> +
> + /* reset UART0 */
> + reset = __raw_readl((char *)KSEG1ADDR(AR531X_RESET));
> + reset = ((reset & ~AR531X_RESET_APB) | AR531X_RESET_UART0);
> + __raw_writel(reset, (char *)KSEG1ADDR(AR531X_RESET));
> +
> + reset &= ~AR531X_RESET_UART0;
> + __raw_writel(reset, (char *)KSEG1ADDR(AR531X_RESET));
> +
> + /* Register the serial port */
> + serial_plat.clock = ar5312_sys_frequency();
> + add_ns16550_device(DEVICE_ID_DYNAMIC, KSEG1ADDR(AR531X_UART0),
> + 8 << AR531X_UART_SHIFT, IORESOURCE_MEM_8BIT, &serial_plat);
> + return 0;
> +}
> +console_initcall(ar531x_console_init);
> diff --git a/arch/mips/mach-ar531x/board.c b/arch/mips/mach-ar531x/board.c
> new file mode 100644
> index 0000000..ec6a6df
> --- /dev/null
> +++ b/arch/mips/mach-ar531x/board.c
> @@ -0,0 +1,182 @@
> +/*
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License. See the file "COPYING" in the main directory of this archive
> + * for more details.
> + *
> + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
> + * Copyright (C) 2006 FON Technology, SL.
> + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
> + * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
> + * Copyright (C) 2013 Oleksij Rempel <linux@rempel-privat.de>
> + */
> +
> +#include <common.h>
> +#include <io.h>
> +#include <mach/ar531x_regs.h>
> +#include <mach/ar231x_platform.h>
> +// this is needed only by eclipse
> +#include <linux/stddef.h>
> +#include <net.h>
> +
> +#define HDR_SIZE 6
> +
> +#define TAB_1 "\t"
> +#define TAB_2 "\t\t"
> +
> +extern struct ar231x_board_data ar231x_board;
> +
> +static void
> +ar231x_print_mac(unsigned char *mac)
> +{
> + int i;
> + for (i = 0; i < 5; i++) {
> + printf("%02x:", mac[i]);
> + }
> + printf("%02x\n", mac[5]);
> +}
> +
> +static void
> +ar231x_print_board_config(struct ar231x_board_config *config)
> +{
> + printf("board config:\n");
> + printf(TAB_1 "chsum:" TAB_2 "%04x\n", config->cksum);
> + printf(TAB_1 "rev:" TAB_2 "%04x\n", config->rev);
> + printf(TAB_1 "name:" TAB_2 "%s\n", config->boardName);
> + printf(TAB_1 "maj:" TAB_2 "%04x\n", config->major);
> + printf(TAB_1 "min:" TAB_2 "%04x\n", config->minor);
> + printf(TAB_1 "board flags:" TAB_1 "%08x\n", config->flags);
> +
> + if (config->flags & BD_ENET0)
> + printf(TAB_2 "ENET0 is stuffed\n");
> + if (config->flags & BD_ENET1)
> + printf(TAB_2 "ENET1 is stuffed\n");
> + if (config->flags & BD_UART1)
> + printf(TAB_2 "UART1 is stuffed\n");
> + if (config->flags & BD_UART0)
> + printf(TAB_2 "UART0 is stuffed (dma)\n");
> + if (config->flags & BD_RSTFACTORY)
> + printf(TAB_2 "Reset factory defaults stuffed\n");
> + if (config->flags & BD_SYSLED)
> + printf(TAB_2 "System LED stuffed\n");
> + if (config->flags & BD_EXTUARTCLK)
> + printf(TAB_2 "External UART clock\n");
> + if (config->flags & BD_CPUFREQ)
> + printf(TAB_2 "cpu freq is valid in nvram\n");
> + if (config->flags & BD_SYSFREQ)
> + printf(TAB_2 "sys freq is set in nvram\n");
> + if (config->flags & BD_WLAN0)
> + printf(TAB_2 "Enable WLAN0\n");
> + if (config->flags & BD_MEMCAP)
> + printf(TAB_2 "CAP SDRAM @ memCap for testing\n");
> + if (config->flags & BD_DISWATCHDOG)
> + printf(TAB_2 "disable system watchdog\n");
> + if (config->flags & BD_WLAN1)
> + printf(TAB_2 "Enable WLAN1 (ar5212)\n");
> + if (config->flags & BD_ISCASPER)
> + printf(TAB_2 "FLAG for AR2312\n");
> + if (config->flags & BD_WLAN0_2G_EN)
> + printf(TAB_2 "FLAG for radio0_2G\n");
> + if (config->flags & BD_WLAN0_5G_EN)
> + printf(TAB_2 "FLAG for radio0_5G\n");
> + if (config->flags & BD_WLAN1_2G_EN)
> + printf(TAB_2 "FLAG for radio1_2G\n");
> + if (config->flags & BD_WLAN1_5G_EN)
> + printf(TAB_2 "FLAG for radio1_5G\n");
> +
> + printf(TAB_1 "ResetConf GPIO pin:" TAB_1 "%04x\n", config->resetConfigGpio);
> + printf(TAB_1 "Sys LED GPIO pin:" TAB_1 "%04x\n", config->sysLedGpio);
> + printf(TAB_1 "CPU Freq:" TAB_2 "%u\n", config->cpuFreq);
> + printf(TAB_1 "Sys Freq:" TAB_2 "%u\n", config->sysFreq);
> + printf(TAB_1 "Calculated Freq:" TAB_1 "%u\n", config->cntFreq);
> +
> + printf(TAB_1 "wlan0 mac:" TAB_2);
> + ar231x_print_mac(config->wlan0_mac);
> + printf(TAB_1 "wlan1 mac:" TAB_2);
> + ar231x_print_mac(config->wlan1_mac);
> + printf(TAB_1 "eth0 mac:" TAB_2);
> + ar231x_print_mac(config->enet0_mac);
> + printf(TAB_1 "eth1 mac:" TAB_2);
> + ar231x_print_mac(config->enet1_mac);
> +
> + printf(TAB_1 "Pseudo PCIID:" TAB_2 "%04x\n", config->pciId);
> + printf(TAB_1 "Mem capacity:" TAB_2 "%u\n", config->memCap);
> +}
> +
> +static u16
> +ar231x_cksum16(u8 *data, int size)
> +{
> + int i;
> + u16 sum;
> +
> + for (i = 0; i < size; i++)
> + sum += data[i];
> +
> + return sum;
> +}
> +
> +static void
> +ar231x_check_mac(u8 *addr)
> +{
> + if (!is_valid_ether_addr(addr)) {
> + pr_warn("config: no valid mac was found. "
> + "Generating random mac: ");
> + random_ether_addr(addr);
> + ar231x_print_mac(addr);
> + }
> +}
> +
> +static u8 *
> +ar231x_find_board_config(u8 *flash_limit)
> +{
> + u8 *addr;
> + int found = 0;
> +
> + for (addr = flash_limit - 0x1000;
> + addr >= flash_limit - 0x30000;
> + addr -= 0x1000) {
> +
> + if (*((u32 *)addr) == AR531X_BD_MAGIC) {
> + found = 1;
> + pr_info("config at %x\n", addr);
> + break;
> + }
> + }
> +
> + if (!found)
> + addr = NULL;
> +
> + return addr;
> +}
> +
> +void
> +ar231x_find_config(u8 *flash_limit)
> +{
> + struct ar231x_board_config *config;
> + u8 *bcfg, bsize;
> + u8 brocken;
> +
> + bcfg = ar231x_find_board_config(flash_limit);
> +
> + bsize = sizeof(struct ar231x_board_config);
> + config = xzalloc(bsize);
> + ar231x_board.config = config;
> +
> + if (bcfg) {
> + u16 cksum;
> + /* Copy the board and radio data to RAM, because accessing the mapped
> + * memory of the flash directly after booting is not safe */
> + memcpy(config, bcfg, bsize);
> + cksum= 0xca + ar231x_cksum16((unsigned char *)config + HDR_SIZE,
> + sizeof(struct ar231x_board_config) - HDR_SIZE);
> + if (cksum != config->cksum) {
> + pr_err("config: checksum is invalid: %04x != %04x\n",
> + cksum, config->cksum);
> + brocken = 1;
> + }
> + ar231x_print_board_config(config);
> + }
> +
> + /* We do not care about wlans here */
> + ar231x_check_mac(config->enet0_mac);
> + ar231x_check_mac(config->enet1_mac);
> +}
> diff --git a/arch/mips/mach-ar531x/include/mach/ar231x_platform.h b/arch/mips/mach-ar531x/include/mach/ar231x_platform.h
> new file mode 100644
> index 0000000..e33b09e
> --- /dev/null
> +++ b/arch/mips/mach-ar531x/include/mach/ar231x_platform.h
> @@ -0,0 +1,82 @@
> +#ifndef __AR531X_PLATFORM_H
> +#define __AR531X_PLATFORM_H
> +
> +/*
> + * This is board-specific data that is stored in a "fixed" location in flash.
> + * It is shared across operating systems, so it should not be changed lightly.
> + * The main reason we need it is in order to extract the ethernet MAC
> + * address(es).
> + */
> +struct ar231x_board_config {
> + u32 magic; /* board data is valid */
> +#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
> + u16 cksum; /* checksum (starting with BD_REV 2) */
> + u16 rev; /* revision of this struct */
> +#define BD_REV 4
> + char boardName[64]; /* Name of board */
> + u16 major; /* Board major number */
> + u16 minor; /* Board minor number */
> + u32 flags; /* Board configuration */
> +#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
> +#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
> +#define BD_UART1 0x00000004 /* UART1 is stuffed */
> +#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
> +#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
> +#define BD_SYSLED 0x00000020 /* System LED stuffed */
> +#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
> +#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
> +#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
> +#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
> +#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
> +#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
> +#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
> +#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
> +#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
> +#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
> +#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
> +#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
> + u16 resetConfigGpio; /* Reset factory GPIO pin */
> + u16 sysLedGpio; /* System LED GPIO pin */
> +
> + u32 cpuFreq; /* CPU core frequency in Hz */
> + u32 sysFreq; /* System frequency in Hz */
> + u32 cntFreq; /* Calculated C0_COUNT frequency */
> +
> + u8 wlan0_mac[6];
> + u8 enet0_mac[6];
> + u8 enet1_mac[6];
> +
> + u16 pciId; /* Pseudo PCIID for common code */
> + u16 memCap; /* cap bank1 in MB */
> +
> + /* version 3 */
> + u8 wlan1_mac[6]; /* (ar5212) */
> +};
> +
> +#define BOARD_CONFIG_BUFSZ 0x1000
> +
> +/*
> + * Platform device information for the Ethernet MAC
> + */
> +struct ar231x_eth_platform_data {
> + u32 base_eth;
> + u32 base_reset;
> + u32 reset_mac;
> + u32 reset_phy;
> + u32 base_phy;
> +
> + u8 *mac;
> +};
> +
> +struct ar231x_board_data {
> + u16 devid;
> +
> + /* board config data */
> + struct ar231x_board_config *config;
> +
> + struct ar231x_eth_platform_data eth_pdata;
> +};
> +
> +void ar231x_find_config(u8 *flash_limit);
> +
> +#endif /* __AR531X_PLATFORM_H */
> diff --git a/arch/mips/mach-ar531x/include/mach/ar531x_regs.h b/arch/mips/mach-ar531x/include/mach/ar531x_regs.h
> new file mode 100644
> index 0000000..2db4b2a
> --- /dev/null
> +++ b/arch/mips/mach-ar531x/include/mach/ar531x_regs.h
> @@ -0,0 +1,295 @@
> +/*
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License. See the file "COPYING" in the main directory of this archive
> + * for more details.
> + *
> + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
> + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
> + * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
> + */
> +
> +#ifndef AR5312_H
> +#define AR5312_H
> +
> +#include <asm/addrspace.h>
> +
> +/*
> + * IRQs
> + */
> +
> +#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
> +#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
> +#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
> +#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
> +#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
> +
> +
> +/* Address Map */
> +#define AR531X_SDRAM0 0x00000000
> +#define AR531X_SDRAM1 0x08000000
> +#define AR531X_WLAN0 0x18000000
> +#define AR531X_WLAN1 0x18500000
> +#define AR531X_ENET0 0x18100000
> +#define AR531X_ENET1 0x18200000
> +#define AR531X_SDRAMCTL 0x18300000
> +#define AR531X_FLASHCTL 0x18400000
> +#define AR531X_APBBASE 0x1c000000
> +#define AR531X_FLASH 0x1e000000
> +
> +#define AR5312_CPU_CLOCK_RATE 180000000
> +/* Used by romSizeMemory to set SDRAM Memory Refresh */
> +#define AR531X_SDRAM_CLOCK_RATE (AR5312_CPU_CLOCK_RATE / 2)
> +/*
> + * SDRAM Memory Refresh (MEM_REF) value is computed as:
> + * 15.625us * SDRAM_CLOCK_RATE (in MHZ)
> + */
> +#define DESIRED_MEMORY_REFRESH_NSECS 15625
> +#define AR531X_SDRAM_MEMORY_REFRESH_VALUE \
> + ((DESIRED_MEMORY_REFRESH_NSECS * AR531X_SDRAM_CLOCK_RATE/1000000) / 1000)
> +
> +/*
> + * APB Address Map
> + */
> +#define AR531X_UART0 (AR531X_APBBASE + 0x0003) /* high speed uart */
> +#define AR531X_UART_SHIFT 2
> +#define AR531X_UART1 (AR531X_APBBASE + 0x1000) /* ar531x only */
> +#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
> +#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
> +#define AR531X_APB2AHB (AR531X_APBBASE + 0x4000)
> +
> +
> +
> +/*
> + * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
> + * should be considered available. The AR5312 supports 2 enet MACS,
> + * even though many reference boards only actually use 1 of them
> + * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
> + * The AR2312 supports 1 enet MAC.
> + */
> +#define AR531X_NUM_ENET_MAC 2
> +
> +/*
> + * Need these defines to determine true number of ethernet MACs
> + */
> +#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
> +#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
> +#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
> +
> +/*
> + * AR531X_NUM_WMAC defines the number of Wireless MACs that\
> + * should be considered available.
> + */
> +#define AR531X_NUM_WMAC 2
> +
> +/* Reset/Timer Block Address Map */
> +#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
> +#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
> +#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
> +#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
> +#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
> +#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
> +#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
> +#define AR5312_CLOCKCTL0 (AR531X_RESETTMR + 0x0060)
> +#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
> +#define AR5312_CLOCKCTL2 (AR531X_RESETTMR + 0x0068)
> +#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
> +#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
> +#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
> +#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
> +#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
> +#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
> +#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
> +
> +/* AR531X_WD_CTRL register bit field definitions */
> +#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
> +#define AR531X_WD_CTRL_NMI 0x0001
> +#define AR531X_WD_CTRL_RESET 0x0002
> +
> +/* AR531X_ISR register bit field definitions */
> +#define AR531X_ISR_NONE 0x0000
> +#define AR531X_ISR_TIMER 0x0001
> +#define AR531X_ISR_AHBPROC 0x0002
> +#define AR531X_ISR_AHBDMA 0x0004
> +#define AR531X_ISR_GPIO 0x0008
> +#define AR531X_ISR_UART0 0x0010
> +#define AR531X_ISR_UART0DMA 0x0020
> +#define AR531X_ISR_WD 0x0040
> +#define AR531X_ISR_LOCAL 0x0080
> +
> +/* AR531X_RESET register bit field definitions */
> +#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
> +#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
> +#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
> +#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
> +#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
> +#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
> +#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
> +#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
> +#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
> +#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
> +#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
> +#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
> +#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
> +#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
> +#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
> +#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
> +#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
> +#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
> +
> +#define AR531X_RESET_WMAC0_BITS \
> + AR531X_RESET_WLAN0 |\
> + AR531X_RESET_WARM_WLAN0_MAC |\
> + AR531X_RESET_WARM_WLAN0_BB
> +
> +#define AR531X_RESERT_WMAC1_BITS \
> + AR531X_RESET_WLAN1 |\
> + AR531X_RESET_WARM_WLAN1_MAC |\
> + AR531X_RESET_WARM_WLAN1_BB
> +
> +/* AR5312_CLOCKCTL1 register bit field definitions */
> +#define AR2312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
> +#define AR2312_CLOCKCTL1_PREDIVIDE_SHIFT 4
> +#define AR2312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
> +#define AR2312_CLOCKCTL1_MULTIPLIER_SHIFT 8
> +#define AR2312_CLOCKCTL1_DOUBLER_MASK 0x00010000
> +
> +/* Valid for AR2313 */
> +#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
> +#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
> +#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
> +#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
> +#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
> +
> +
> +/* AR531X_ENABLE register bit field definitions */
> +#define AR531X_ENABLE_WLAN0 0x0001
> +#define AR531X_ENABLE_ENET0 0x0002
> +#define AR531X_ENABLE_ENET1 0x0004
> +#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
> +#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
> +#define AR531X_ENABLE_WLAN1 \
> + (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
> +
> +/* AR531X_REV register bit field definitions */
> +#define AR531X_REV_WMAC_MAJ 0xf000
> +#define AR531X_REV_WMAC_MAJ_S 12
> +#define AR531X_REV_WMAC_MIN 0x0f00
> +#define AR531X_REV_WMAC_MIN_S 8
> +#define AR531X_REV_MAJ 0x00f0
> +#define AR531X_REV_MAJ_S 4
> +#define AR531X_REV_MIN 0x000f
> +#define AR531X_REV_MIN_S 0
> +#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN)
> +
> +/* Major revision numbers, bits 7..4 of Revision ID register */
> +#define AR531X_REV_MAJ_AR5312 0x4
> +#define AR531X_REV_MAJ_AR2313 0x5
> +
> +/* Minor revision numbers, bits 3..0 of Revision ID register */
> +#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
> +#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
> +
> +/* AR531X_FLASHCTL register bit field definitions */
> +#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
> +#define FLASHCTL_IDCY_S 0
> +#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
> +#define FLASHCTL_WST1_S 5
> +#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
> +#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
> +#define FLASHCTL_WST2_S 11
> +#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
> +#define FLASHCTL_AC_S 16
> +#define FLASHCTL_AC_128K 0x00000000
> +#define FLASHCTL_AC_256K 0x00010000
> +#define FLASHCTL_AC_512K 0x00020000
> +#define FLASHCTL_AC_1M 0x00030000
> +#define FLASHCTL_AC_2M 0x00040000
> +#define FLASHCTL_AC_4M 0x00050000
> +#define FLASHCTL_AC_8M 0x00060000
> +#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
> +#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
> +#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
> +#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
> +#define FLASHCTL_WP 0x04000000 /* Write protect */
> +#define FLASHCTL_BM 0x08000000 /* Burst mode */
> +#define FLASHCTL_MW 0x30000000 /* Memory width */
> +#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
> +#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
> +#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
> +#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
> +#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
> +#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
> +
> +/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
> +#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
> +#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
> +#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
> +
> +
> +/* ARM SDRAM Controller -- just enough to determine memory size */
> +#define AR531X_MEM_CFG0 (AR531X_SDRAMCTL + 0x00)
> +#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
> +#define AR531X_MEM_REF (AR531X_SDRAMCTL + 0x08) /* 16 bit value */
> +
> +#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
> +#define MEM_CFG1_AC0_S 8
> +#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
> +#define MEM_CFG1_AC1_S 12
> +
> +#define MEM_CFG0_F0 0x00000002 /* bank 0: 256Mb support */
> +#define MEM_CFG0_T0 0x00000004 /* bank 0: chip width */
> +#define MEM_CFG0_B0 0x00000008 /* bank 0: 2 vs 4 bank */
> +#define MEM_CFG0_F1 0x00000020 /* bank 1: 256Mb support */
> +#define MEM_CFG0_T1 0x00000040 /* bank 1: chip width */
> +#define MEM_CFG0_B1 0x00000080 /* bank 1: 2 vs 4 bank */
> + /* bank 2 and 3 are not supported */
> +#define MEM_CFG0_E 0x00020000 /* SDRAM clock control */
> +#define MEM_CFG0_C 0x00040000 /* SDRAM clock enable */
> +#define MEM_CFG0_X 0x00080000 /* bus width (0 == 32b) */
> +#define MEM_CFG0_CAS 0x00300000 /* CAS latency (1-3) */
> +#define MEM_CFG0_C1 0x00100000
> +#define MEM_CFG0_C2 0x00200000
> +#define MEM_CFG0_C3 0x00300000
> +#define MEM_CFG0_R 0x00c00000 /* RAS to CAS latency (1-3) */
> +#define MEM_CFG0_R1 0x00400000
> +#define MEM_CFG0_R2 0x00800000
> +#define MEM_CFG0_R3 0x00c00000
> +#define MEM_CFG0_A 0x01000000 /* AHB auto pre-charge */
> +
> +#define MEM_CFG1_I 0x00000001 /* memory init control */
> +#define MEM_CFG1_M 0x00000002 /* memory init control */
> +#define MEM_CFG1_R 0x00000004 /* read buffer enable (unused) */
> +#define MEM_CFG1_W 0x00000008 /* write buffer enable (unused) */
> +#define MEM_CFG1_B 0x00000010 /* SDRAM engine busy */
> +#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
> +#define MEM_CFG1_AC_2 0 /* AC of 2MB */
> +#define MEM_CFG1_AC_4 1 /* AC of 4MB */
> +#define MEM_CFG1_AC_8 2 /* AC of 8MB */
> +#define MEM_CFG1_AC_16 3 /* AC of 16MB */
> +#define MEM_CFG1_AC_32 4 /* AC of 32MB */
> +#define MEM_CFG1_AC_64 5 /* AC of 64MB */
> +#define MEM_CFG1_AC_128 6 /* AC of 128MB */
> +#define MEM_CFG1_AC0_S 8
> +#define MEM_CFG1_E0 0x00000800 /* bank 0: enable */
> +#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
> +#define MEM_CFG1_AC1_S 12
> +#define MEM_CFG1_E1 0x00008000 /* bank 1: enable */
> +
> +
> +/* GPIO Address Map */
> +#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
> +#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
> +#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
> +#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
> +
> +/* GPIO Control Register bit field definitions */
> +#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
> +#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */
> +#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */
> +#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
> +#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
> +#define AR531X_NUM_GPIO 8
> +
> +
> +#endif
> +
> diff --git a/arch/mips/mach-ar531x/include/mach/debug_ll.h b/arch/mips/mach-ar531x/include/mach/debug_ll.h
> new file mode 100644
> index 0000000..b4c558b
> --- /dev/null
> +++ b/arch/mips/mach-ar531x/include/mach/debug_ll.h
> @@ -0,0 +1,31 @@
> +/*
> + * Copyright (C) 2011 Antony Pavlov <antonynpavlov@gmail.com>
> + *
> + * This file is part of barebox.
> + * See file CREDITS for list of people who contributed to this project.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +/** @file
> + * This File contains declaration for early output support
> + */
> +#ifndef __MACH_AR531X_DEBUG_LL_H__
> +#define __MACH_AR531X_DEBUG_LL_H__
> +
> +#include <mach/ar531x_regs.h>
> +
> +#define DEBUG_LL_UART_ADDR KSEG1ADDR(AR531X_UART0)
> +#define DEBUG_LL_UART_SHIFT AR531X_UART_SHIFT
> +
> +#include <debug_ll_ns16550.h>
> +
> +#endif /* __INCLUDE_ARCH_DEBUG_LL_H__ */
> diff --git a/arch/mips/mach-ar531x/lowlevel_init.S b/arch/mips/mach-ar531x/lowlevel_init.S
> new file mode 100644
> index 0000000..d7f708c
> --- /dev/null
> +++ b/arch/mips/mach-ar531x/lowlevel_init.S
> @@ -0,0 +1,83 @@
> +#include <mach/ar531x_regs.h>
> +//#include <common.h>
> +#include <asm/regdef.h>
> +#include <asm/mipsregs.h>
> +#include <asm/asm.h>
> +#include <asm-generic/memory_layout.h>
> +#include <generated/compile.h>
> +#include <generated/utsrelease.h>
> +
> +
> +.globl lowlevel_init
> +lowlevel_init:
> + li t5, MEM_CFG0_X # try x16
> + li t6, 0x23000 # use 8-word burst
> +
> + /* Configure for a x16 SDRAM with 8-word burst */
> + li t5, MEM_CFG0_X # try x16
> + li t6, 0x23000 # use 8-word burst
> +99:
> + li a0, KSEG1 | AR531X_MEM_CFG0
> + li a1, KSEG1 | AR531X_MEM_CFG1
> + li a2, KSEG1 | AR531X_MEM_REF
> +
> + /* 1) wait 100us - handled by latency to boot up to this point. */
> +
> + /* 2) Set the I and M bits to issue an SDRAM nop */
> + li t0, MEM_CFG1_E0 | (MEM_CFG1_AC_128 << MEM_CFG1_AC0_S) | \
> + MEM_CFG1_E1 | (MEM_CFG1_AC_128 << MEM_CFG1_AC1_S) | \
> + MEM_CFG1_M | MEM_CFG1_I
> + sw t0, 0(a1) # MEM_CFG1
> +
> + /* 3) Wait 200us (roughly) */
> +// MEMDELAY(50, t2)
> +
> + /* 4) Reset the M bit to issue an SDRAM PRE-ALL */
> + li t0, MEM_CFG1_E0 | (MEM_CFG1_AC_128 << MEM_CFG1_AC0_S) | \
> + MEM_CFG1_E1 | (MEM_CFG1_AC_128 << MEM_CFG1_AC1_S) | \
> + MEM_CFG1_I
> + sw t0, 0(a1) # MEM_CFG1
> + sync
> +
> + /* 5) Generate a refresh every 16 clocks (spec says 10) */
> + li t0, 16 # very fast refresh for now
> + sw t0, 0(a2) # MEM_REF
> +
> + /* 6) Wait for 128 clocks (8 refresh cycles) */
> +// MEMDELAY(5, t2)
> +
> + /*
> + * 7) Set operational value into the reset timer.
> + * [out of order from ARM SDRAM ctrl spec]
> + */
> +
> + /* 8) Set command write mode, and read each SDRAM */
> + li t0, MEM_CFG1_E0 | (MEM_CFG1_AC_128 << MEM_CFG1_AC0_S) | \
> + MEM_CFG1_E1 | (MEM_CFG1_AC_128 << MEM_CFG1_AC1_S) | \
> + MEM_CFG1_M
> + sw t0, 0(a1) # MEM_CFG1
> + sync
> + li t0, KSEG1 | AR531X_SDRAM0
> + or t0, t6 # burst
> + lw zero, 0(t0)
> + li t0, KSEG1 | AR531X_SDRAM1
> + or t0, t6 # burst
> + lw zero, 0(t0)
> +
> + /* 9) Program configuration register 0 */
> + li t0, MEM_CFG0_C | MEM_CFG0_C2 | MEM_CFG0_R1 | \
> + MEM_CFG0_B0 | MEM_CFG0_B1
> + or t0, t5 # x16 or x32
> + sw t0, 0(a0) # MEM_CFG0
> + sync
> +
> + li t0, AR531X_SDRAM_MEMORY_REFRESH_VALUE
> + sw t0, 0(a2) # MEM_REF
> + sync
> +
> + /* 10) Clear I and M and set cfg1 to the normal operational value */
> + li t0, MEM_CFG1_E0 | (MEM_CFG1_AC_128 << MEM_CFG1_AC0_S) | \
> + MEM_CFG1_E1 | (MEM_CFG1_AC_128 << MEM_CFG1_AC1_S)
> + sw t0, 0(a1) # MEM_CFG1
> + sync
> +
> diff --git a/arch/mips/mach-ar531x/mach-ar531x.dox b/arch/mips/mach-ar531x/mach-ar531x.dox
> new file mode 100644
> index 0000000..4304654
> --- /dev/null
> +++ b/arch/mips/mach-ar531x/mach-ar531x.dox
> @@ -0,0 +1,7 @@
> +/** @page dev_ar531x_mach AR531x in barebox
> +
> +@section ar531x_boards AR531x-based boards
> +
> +@li @subpage netgear-wg102
> +
> +*/
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
--
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-04-25 14:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-22 9:05 Oleksij Rempel
2013-04-22 16:50 ` Sascha Hauer
2013-04-25 14:54 ` antonynpavlov [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-04-22 9:00 Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130425185409.f8a3b68b1aa6eca504293fea@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=bug-track@fisher-privat.net \
--cc=linux@rempel-privat.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox