From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1UZG1u-0008Jb-6J for barebox@lists.infradead.org; Mon, 06 May 2013 07:40:17 +0000 Received: from dude.hi.pengutronix.de ([2001:6f8:1178:2:21e:67ff:fe11:9c5c]) by metis.ext.pengutronix.de with esmtp (Exim 4.72) (envelope-from ) id 1UZG1X-0003rT-Bx for barebox@lists.infradead.org; Mon, 06 May 2013 09:39:51 +0200 Received: from sha by dude.hi.pengutronix.de with local (Exim 4.80) (envelope-from ) id 1UZG1X-0002Hh-AV for barebox@lists.infradead.org; Mon, 06 May 2013 09:39:51 +0200 Date: Mon, 6 May 2013 09:39:51 +0200 From: Sascha Hauer Message-ID: <20130506073951.GD32299@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: v2013.05.0 To: barebox@lists.infradead.org Hi All, We have a may release. As usual here are the patches applied since the last release. Most notable change this time is that we no longer use libfdt which brings us a step closer to good devicetree support in barebox. Sascha ---------------------------------------------------------------- Alexander Shiyan (25): ARM: clep7212: Migrate to config-board ARM: clps711x: Fix setup bus wait state scaling factor for 13Mhz mode ARM: clps711x: Replace numeric PLL option with boolean for raise CPU = frequency ARM: clps711x: Add clocksource driver ARM: clps711x: Using COMMON_CLK Add Generic GPIO driver ARM: clps711x: Add GPIO driver Add helpers to define resources ARM: clps711x: Migrate to using DEFINE_RES_MEM macro ARM: clps711x: Limit chipselect setup up to CS5 Add system controller register driver (SYSCON) ARM: clps711x: Export system-wide registers through SYSCON driver serial: clps711x: Migrate to using SYSCON driver Extend device_platform_driver macro Add more drivers to using device_platform_driver() Introduce console_platform_driver() macro and use it for serial drive= rs SPI: Rename spi_register_driver() for using with register_driver_macr= o() I2C: Rename i2c_register_driver() for using with register_driver_macr= o() Introduce device_spi_driver() macro and use it for SPI drivers ARM: ccmx51: Migrate to defaultenv-2 arm: ccmx51: Using imx51_add_usbotg() function for register USB ARM: Add CPU detection macros for ARM720 mci: Fix bug if probe parameter is omitted ubimkvol: Typo fix ARM: ccxmx51: Fix OTG Host USB mode Alexandre Belloni (1): cfa10036: Retrieve the RAM size at runtime Antony Pavlov (2): of: fix typos clkdev: fix typo Eric B=E9nard (2): usb/gadget/Kconfig: fix menu mtdraw: fix oob read and write Hubert Feurstein (5): commands/tftp: use debug() for debug output mci-core: use dev_* for messages mci-core: fix coding style common/filetype: move partition-table detection into own function common/partition: check only for partition table types Jan Weitzel (1): ubiformat: get buffer from malloc Jean-Christophe PLAGNIOL-VILLARD (10): tlsf_malloc: drop duplicate include startup: switch to pr_xxx at91: clock switch to pr_info meminfo: switch to pr_xxx net/console: switch to pr_xxx startup: switch to pr_xxx barebox_banner: switch to pr_info net/phy: convert to pr_info ext4: switch debug and printf to dev_xxx defaultenv-2: move settings in a submenu Josh Cartwright (1): macb: rename platform data Juergen Beisert (2): MXS/Chumby: fix MCI device registration MXS/MCI: don't touch variables in the host structure Lucas Stach (1): dtc: add .gitignore for generated files Marc Kleine-Budde (11): ARM i.MX bootsource: convert enums from enum imx_bootsource to upperc= ase ARM i.MX bootsource: convert all imx*_boot_save_loc functions to void ARM i.MX bootsource: imx_25_35_boot_save_loc: remove leftover do-noth= ing code ARM i.MX bootsource: rename imx_27_boot_save_loc -> imx27_boot_save_l= oc ARM i.MX bootsource: add separate function for mx25 and mx35 bootsource: create arch independent bootsource framework bootsource: use initcall to export bootsource location to environment bootsource: add support for bootsource instance information bootsource: add definition for i2c-eeprom, spi-nor, spi-eeprom and usb ARM: mxs: add bootsource detection ARM i.MX28: make chip reset via reset pin work again Sascha Hauer (116): mtd: nand: register nand flashes with nand specific function mtd: Add parameter to allow erasing bad blocks mtd nand: introduce bbm.h nand command: use loff_t for block offset nand command: use enumeration for command instead of bitmask nand command: check for directly after option parsing mtd: nand: replace NAND_USE_FLASH_BBT with NAND_BBT_USE_FLASH mtd nand i.MX: remove unused code ARM: make cpu architecture detection available as static inline funct= ion ARM: add early mmu cache flush function and use it in setup_c of: unflatten: allocate root node explicitly of: export of_find_child of: removed unused variables of: Let of_find_node_by_path iterate over tree of: remove allnodes list ARM bootm: Use of_get_fixed_tree of: Add of_set_property and of_create_node of_node command: use of_create_node of: Add missing prototype for of_device_is_compatible of: let of_unflatten_dtb return the unflattened tree of: Add root node argument to of_find_node_by_path of: Add of_write_number helper of: Add initrd helper of: make unflatten independent of libfdt of: make flatten independent of libfdt of/fdt: use optimized endianess conversion oftree command: Use of_print_nodes of: move OFTREE Kconfig option to drivers/of/ of: make OFDEVICE a user selectable option oftree command: retire CMD_OFTREE_PROBE Kconfig option of: move oftree Kconfig to the top of the drivers menu of: Pass barebox internal format devicetree to of_get_fixed_tree bootm: Use of_print_nodes instead of fdt_print of: move flat devicetree functions to separate file of: Add of property write functions for u32 of: make value of property in of_new_property optional of: Add missing prototype for size/address counting functions of: fixup unflattened devicetree of_* commands: print usage when insufficient arguments are given of_property command: Fix crash with empty property value ARM: bootm: rework concatenated oftree of: memory: Use of_write_number of: Add reservemap handling bootm: Pass unflattened devicetree to handlers ARM bootm: Switch initrd support to unflattened tree of: remove unused libfdt of: make locally used functions static ARM: provide accessor functions for linker variables ARM boards: Use accessor functions to access linker variables ARN: fixup vector addresses for relocatable binaries ARM: Add relocatable binary support ata: ahci: fix wrong link check ata: add ata logical device to defer probe ata: Add init callback to ata_port_operations ata: ahci: implement init callback ata: ahci: refactor init functions net: fec: drop sevenwire support net: fec: use standard phy type defines Make: update setlocalversion from the kernel mtd: nand: Add bbt parameter mtd: nand: Add command to generate a flash BBT include asm/sections.h instead of asm-generic/sections.h MMC i.MX: remove unnecessary mach include ARM i.MX: Add double include protection for generic.h ARM: Add missing barebox_arm_boarddata function net: phy: micrel: Update id table from kernel ARM i.MX6: Add mmdc calibration support Add DMO RealQ7 board support Add DMO RealQ7 defconfig ARM: i.MX: external nand boot: check for bad blocks ARM: head: Add some space behind the image header ARM: i.MX: Add bbu handler for external NAND boot ARM: i.MX pcm043: register external nand boot handler scripts: Add dtc Makefile.lib: Add dtc support ARM: Initial dts support mips: initialize malloc pool before start_barebox() nios: initialize malloc pool before start_barebox() openrisc: initialize malloc pool before start_barebox() blackfin: initialize malloc pool before start_barebox() x86: initialize malloc pool before start_barebox() bus: Make struct device a pointer fs: allocate FILE table dynamically gpio: allocate gpio_desc table dynamically clk: Add is_enabled callback ARM: i.MX: rename barebox_loc to bootsource clk: remove unused __clk_[get|put] ARM: i.MX53: Add bootsource instance information Merge branch 'for-next/arm' Merge branch 'for-next/ata' Merge branch 'for-next/bootsource' Merge branch 'for-next/clk' Merge branch 'for-next/clps711x' Merge branch 'for-next/defenv' Merge branch 'for-next/device-driver-macros' Merge branch 'for-next/fec' Merge branch 'for-next/imx' Merge branch 'for-next/imx-external-nand-boot' Merge branch 'for-next/imx-realq7' Merge branch 'for-next/malloc-all-initcalls' Merge branch 'for-next/misc' Merge branch 'for-next/misc-arm' Merge branch 'for-next/mtd' Merge branch 'for-next/oftree' Merge branch 'for-next/omap' Merge branch 'for-next/pr_print' Merge branch 'for-next/relocate' Merge branch 'for-next/zynq' of/net: Add net related of helpers net: fec: probe phy_mode from devicetree ARM: i.MX53: Fix pll216 setup ARM: i.MX53: split lowlevel function into early/nonearly version ARM: tqma53: call SoC lowlevel function early dtc: remove autogenerated modules.order defaultenv-2: Fix verbose booting Release v2013.05.0 Steffen Trumtrar (9): serial: Add driver for Cadence UART ARM: zynq: Add new architecture zynq ARM: zynq: add clk support for zynq7000 ARM: zynq: add zynq fsbl checksum script ARM: zynq: Add support for the Avnet Zedboard net: macb: turn off endian_swp_pkt_en ARM: zynq: add support for ethernet ARM: zedboard: add ethernet device of: property: fix error message Teresa G=E1mez (4): AM33XX: Move muxing defines to header file AM33XX: pcm051: Create custom mux file OMAP: Move bootsource functions OMAP: Add option to use environment from MMC Uwe Kleine-K=F6nig (1): of: fix how an initrd is passed to Linux Vicente Bergas (11): defaultenv-2: don't load nonexistent file omap4_romusb: rename omap4_usbboot_pdata to omap4_usbboot_data panda: remove unused configuration items ARM: omap4_romusb: allow adding usb-serial when not booting from usb archosg9: enable booting from sd-card omap_uart: add low level port serial initialization omap_uart: rename OMAP3EVM_UARTx to OMAP_UARTx twl6030: add power button as an input key ArchosG9: zero all features before setting them gpio_keys: detect keys pressed before booting ArchosG9: add keyboard input and new reset menu entries .gitignore | 1 + Makefile | 65 +- arch/arm/Kconfig | 17 + arch/arm/Makefile | 27 + arch/arm/boards/a9m2410/a9m2410.c | 2 +- arch/arm/boards/a9m2440/a9m2440.c | 2 +- arch/arm/boards/animeo_ip/init.c | 2 +- arch/arm/boards/archosg9/archos_features.c | 58 +- arch/arm/boards/archosg9/board.c | 28 +- arch/arm/boards/archosg9/env/bin/init | 28 + arch/arm/boards/archosg9/env/boot/sd-card-android | 11 + arch/arm/boards/archosg9/env/boot/sd-card-linux | 17 + arch/arm/boards/archosg9/env/boot/usb-android | 11 + arch/arm/boards/archosg9/env/boot/usb-linux | 17 + arch/arm/boards/archosg9/env/config | 3 - arch/arm/boards/archosg9/env/init/automount | 28 + arch/arm/boards/archosg9/env/init/bootsource | 11 + arch/arm/boards/archosg9/env/init/usbboot | 6 - arch/arm/boards/archosg9/env/menu/mainmenu | 25 + arch/arm/boards/at91rm9200ek/init.c | 2 +- arch/arm/boards/at91sam9260ek/init.c | 2 +- arch/arm/boards/at91sam9263ek/init.c | 2 +- arch/arm/boards/at91sam9m10g45ek/init.c | 2 +- arch/arm/boards/at91sam9m10ihd/hw_version.c | 1 - arch/arm/boards/at91sam9m10ihd/init.c | 2 +- arch/arm/boards/at91sam9x5ek/hw_version.c | 32 +- arch/arm/boards/at91sam9x5ek/init.c | 2 +- arch/arm/boards/avnet-zedboard/Makefile | 3 + arch/arm/boards/avnet-zedboard/board.c | 51 + arch/arm/boards/avnet-zedboard/config.h | 4 + .../boards/avnet-zedboard/env/init/config-board | 7 + arch/arm/boards/avnet-zedboard/flash_header.c | 62 + arch/arm/boards/avnet-zedboard/lowlevel.c | 261 +++ arch/arm/boards/beagle/board.c | 1 - arch/arm/boards/beaglebone/board.c | 37 +- arch/arm/boards/beaglebone/lowlevel.c | 2 +- arch/arm/boards/ccxmx51/ccxmx51.c | 54 +- arch/arm/boards/ccxmx51/env/boot/nand | 9 + arch/arm/boards/ccxmx51/env/config | 37 - arch/arm/boards/ccxmx51/env/config-board | 12 + arch/arm/boards/ccxmx51/env/init/mtdparts-nand | 11 + arch/arm/boards/chumby_falconwing/falconwing.c | 2 +- arch/arm/boards/clep7212/env/config | 20 - arch/arm/boards/clep7212/env/config-board | 14 + arch/arm/boards/clep7212/lowlevel.c | 8 +- arch/arm/boards/crystalfontz-cfa10036/cfa10036.c | 18 +- arch/arm/boards/delphi-poc20/env/boot/mmc | 10 + arch/arm/boards/dmo-mx6-realq7/Makefile | 2 + arch/arm/boards/dmo-mx6-realq7/board.c | 407 ++++ arch/arm/boards/dmo-mx6-realq7/config.h | 4 + arch/arm/boards/dmo-mx6-realq7/env/boot/mmc | 10 + arch/arm/boards/dmo-mx6-realq7/env/config-board | 7 + arch/arm/boards/dmo-mx6-realq7/env/init/automount | 14 + arch/arm/boards/dmo-mx6-realq7/flash_header.c | 40 + arch/arm/boards/dmo-mx6-realq7/lowlevel.c | 155 ++ arch/arm/boards/dss11/init.c | 2 +- arch/arm/boards/efika-mx-smartbook/board.c | 3 +- .../boards/efika-mx-smartbook/env/init/bootsource | 2 +- arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 4 +- arch/arm/boards/eukrea_cpuimx25/lowlevel.c | 2 +- arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 4 +- arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 2 +- arch/arm/boards/eukrea_cpuimx35/lowlevel.c | 2 +- arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c | 2 +- arch/arm/boards/freescale-mx25-3-stack/3stack.c | 4 +- arch/arm/boards/freescale-mx28-evk/mx28-evk.c | 2 +- arch/arm/boards/freescale-mx35-3-stack/3stack.c | 4 +- arch/arm/boards/freescale-mx51-pdk/board.c | 2 +- arch/arm/boards/freescale-mx53-loco/board.c | 2 +- arch/arm/boards/freescale-mx53-smd/board.c | 2 +- arch/arm/boards/freescale-mx6-arm2/board.c | 2 +- arch/arm/boards/freescale-mx6-sabrelite/board.c | 2 +- arch/arm/boards/freescale-mx6-sabresd/board.c | 2 +- arch/arm/boards/friendlyarm-mini2440/mini2440.c | 2 +- arch/arm/boards/friendlyarm-tiny210/lowlevel.c | 3 +- arch/arm/boards/guf-cupid/board.c | 2 +- arch/arm/boards/guf-cupid/lowlevel.c | 2 +- arch/arm/boards/guf-neso/board.c | 2 +- arch/arm/boards/guf-neso/lowlevel.c | 2 +- arch/arm/boards/guf-vincell/board.c | 2 +- arch/arm/boards/highbank/init.c | 49 +- arch/arm/boards/imx21ads/imx21ads.c | 2 +- arch/arm/boards/imx27ads/imx27ads.c | 2 +- arch/arm/boards/karo-tx25/board.c | 4 +- arch/arm/boards/karo-tx25/lowlevel.c | 2 +- arch/arm/boards/karo-tx28/tx28-stk5.c | 2 +- arch/arm/boards/karo-tx51/tx51.c | 2 +- arch/arm/boards/karo-tx53/board.c | 9 +- arch/arm/boards/karo-tx53/lowlevel.c | 2 +- arch/arm/boards/mmccpu/init.c | 2 +- arch/arm/boards/omap3evm/board.c | 4 +- arch/arm/boards/omap3evm/lowlevel.c | 4 +- arch/arm/boards/panda/board.c | 30 - arch/arm/boards/pcm037/pcm037.c | 2 +- arch/arm/boards/pcm038/lowlevel.c | 2 +- arch/arm/boards/pcm038/pcm038.c | 7 +- arch/arm/boards/pcm043/lowlevel.c | 2 +- arch/arm/boards/pcm043/pcm043.c | 15 +- arch/arm/boards/pcm049/board.c | 1 - arch/arm/boards/pcm051/Makefile | 2 +- arch/arm/boards/pcm051/board.c | 4 +- arch/arm/boards/pcm051/mux.c | 20 + arch/arm/boards/pcm051/mux.h | 1 + arch/arm/boards/phycard-a-l1/pca-a-l1.c | 1 - arch/arm/boards/phycard-a-xl2/pca-a-xl2.c | 1 - arch/arm/boards/phycard-i.MX27/pca100.c | 4 +- arch/arm/boards/pm9263/init.c | 2 +- arch/arm/boards/pm9g45/init.c | 2 +- arch/arm/boards/qil-a9260/init.c | 2 +- arch/arm/boards/sama5d3xek/hw_version.c | 1 - arch/arm/boards/sama5d3xek/init.c | 4 +- arch/arm/boards/telit-evk-pro3/init.c | 2 +- arch/arm/boards/tny-a926x/init.c | 2 +- arch/arm/boards/tqma53/board.c | 3 +- arch/arm/boards/tqma53/lowlevel.c | 2 + arch/arm/boards/usb-a926x/init.c | 2 +- arch/arm/configs/archosg9_defconfig | 70 +- arch/arm/configs/archosg9_xload_defconfig | 20 +- arch/arm/configs/ccmx51_defconfig | 9 +- arch/arm/configs/dmo-realq7_defconfig | 91 + arch/arm/configs/panda_xload_defconfig | 3 - arch/arm/configs/zedboard_defconfig | 49 + arch/arm/cpu/Makefile | 4 + arch/arm/cpu/cache.c | 33 + arch/arm/cpu/common.c | 66 + arch/arm/cpu/cpu.c | 34 +- arch/{mips/lib/memory.c =3D> arm/cpu/dtb.c} | 32 +- arch/arm/cpu/exceptions.S | 55 +- arch/arm/cpu/mmu.c | 2 + arch/arm/cpu/setupc.S | 62 + arch/arm/cpu/start-pbl.c | 18 +- arch/arm/cpu/start.c | 15 + arch/arm/dts/.gitignore | 1 + arch/arm/dts/Makefile | 10 + arch/arm/dts/skeleton.dtsi | 13 + arch/arm/include/asm/barebox-arm-head.h | 10 + arch/arm/include/asm/barebox-arm.h | 35 + arch/arm/include/asm/cache.h | 8 + arch/arm/include/asm/clkdev.h | 17 - arch/arm/include/asm/mmu.h | 1 - arch/arm/include/asm/sections.h | 33 + arch/arm/include/asm/system_info.h | 48 + arch/arm/lib/armlinux.c | 2 - arch/arm/lib/barebox.lds.S | 19 + arch/arm/lib/bootm.c | 56 +- arch/arm/lib/runtime-offset.S | 32 + arch/arm/lib/unwind.c | 2 +- arch/arm/mach-at91/at91rm9200_devices.c | 4 +- arch/arm/mach-at91/at91sam9260_devices.c | 4 +- arch/arm/mach-at91/at91sam9263_devices.c | 4 +- arch/arm/mach-at91/at91sam9g45_devices.c | 4 +- arch/arm/mach-at91/at91sam9x5_devices.c | 4 +- arch/arm/mach-at91/clock.c | 2 +- arch/arm/mach-at91/include/mach/board.h | 11 +- arch/arm/mach-at91/include/mach/clkdev.h | 7 - arch/arm/mach-at91/sama5d3_devices.c | 4 +- arch/arm/mach-bcm2835/include/mach/clkdev.h | 7 - arch/arm/mach-clps711x/Kconfig | 13 +- arch/arm/mach-clps711x/clock.c | 126 +- arch/arm/mach-clps711x/devices.c | 108 +- arch/arm/mach-clps711x/include/mach/clkdev.h | 7 - arch/arm/mach-clps711x/include/mach/gpio.h | 3 + arch/arm/mach-clps711x/lowlevel.c | 16 +- arch/arm/mach-imx/Kconfig | 12 + arch/arm/mach-imx/Makefile | 2 + arch/arm/mach-imx/boot.c | 182 +- arch/arm/mach-imx/external-nand-boot.c | 86 +- arch/arm/mach-imx/imx-bbu-external-nand.c | 210 ++ arch/arm/mach-imx/imx25.c | 6 +- arch/arm/mach-imx/imx27.c | 2 +- arch/arm/mach-imx/imx35.c | 6 +- arch/arm/mach-imx/imx51.c | 4 +- arch/arm/mach-imx/imx53.c | 14 +- arch/arm/mach-imx/imx6-mmdc.c | 868 +++++++ arch/arm/mach-imx/include/mach/bbu.h | 11 + arch/arm/mach-imx/include/mach/clkdev.h | 7 - arch/arm/mach-imx/include/mach/devices-imx6.h | 20 + arch/arm/mach-imx/include/mach/generic.h | 30 +- arch/arm/mach-imx/include/mach/imx-flash-header.h | 2 +- arch/arm/mach-imx/include/mach/imx-nand.h | 6 + arch/arm/mach-imx/include/mach/imx5.h | 4 +- arch/arm/mach-imx/include/mach/imx6-mmdc.h | 7 + arch/arm/mach-mxs/imx.c | 99 + arch/arm/mach-mxs/include/mach/revision.h | 24 + arch/arm/mach-mxs/soc-imx28.c | 6 +- arch/arm/mach-nomadik/include/mach/clkdev.h | 7 - arch/arm/mach-omap/Kconfig | 11 +- arch/arm/mach-omap/Makefile | 2 +- arch/arm/mach-omap/am33xx_generic.c | 2 +- arch/arm/mach-omap/am33xx_mux.c | 246 +- arch/arm/mach-omap/include/mach/am33xx-mux.h | 246 +- arch/arm/mach-omap/include/mach/debug_ll.h | 27 +- arch/arm/mach-omap/include/mach/generic.h | 17 + arch/arm/mach-omap/include/mach/omap4_rom_usb.h | 3 + arch/arm/mach-omap/include/mach/xload.h | 16 - arch/arm/mach-omap/omap3_generic.c | 2 +- arch/arm/mach-omap/omap4_generic.c | 2 +- arch/arm/mach-omap/omap4_rom_usb.c | 97 +- arch/arm/mach-omap/omap_generic.c | 65 + arch/arm/mach-omap/xload.c | 13 +- arch/arm/mach-versatile/include/mach/clkdev.h | 7 - arch/arm/mach-vexpress/include/mach/clkdev.h | 7 - arch/arm/mach-zynq/Kconfig | 39 + arch/arm/mach-zynq/Makefile | 1 + arch/arm/mach-zynq/clk-zynq7000.c | 424 ++++ arch/arm/mach-zynq/devices.c | 13 + arch/arm/mach-zynq/include/mach/barebox.lds.h | 8 + .../include/mach/clkdev.h | 1 - arch/arm/mach-zynq/include/mach/debug_ll.h | 37 + arch/arm/mach-zynq/include/mach/devices.h | 20 + .../arm/mach-zynq/include/mach/zynq-flash-header.h | 38 + arch/arm/mach-zynq/include/mach/zynq7000-regs.h | 133 ++ arch/arm/mach-zynq/zynq.c | 56 + arch/arm/pbl/Makefile | 3 + arch/arm/pbl/zbarebox.lds.S | 16 + arch/blackfin/cpu-bf561/start.S | 4 +- arch/blackfin/lib/board.c | 6 +- arch/mips/boot/main_entry.c | 5 + arch/mips/lib/Makefile | 1 - arch/nios2/cpu/start.S | 4 +- arch/nios2/lib/board.c | 8 +- arch/openrisc/cpu/start.S | 2 +- arch/openrisc/lib/board.c | 7 +- arch/ppc/Kconfig | 1 + arch/ppc/boards/pcm030/pcm030.c | 2 +- arch/ppc/lib/ppclinux.c | 8 + arch/ppc/mach-mpc5xxx/cpu.c | 26 +- arch/x86/boot/main_entry.c | 4 +- arch/x86/lib/memory.c | 7 +- commands/Kconfig | 10 - commands/bootm.c | 22 +- commands/nand.c | 48 +- commands/of_node.c | 33 +- commands/of_property.c | 28 +- commands/oftree.c | 42 +- commands/tftp.c | 2 +- commands/ubi.c | 2 +- commands/ubiformat.c | 22 +- common/Kconfig | 2 +- common/Makefile | 1 + common/bootsource.c | 90 + common/filetype.c | 36 +- common/kallsyms.c | 2 +- common/meminfo.c | 8 +- common/memory.c | 70 +- common/oftree.c | 314 +-- common/partitions.c | 4 +- common/startup.c | 12 +- common/tlsf_malloc.c | 2 - common/version.c | 4 +- defaultenv-2/base/bin/boot | 2 +- defaultenv-2/base/bin/init | 2 +- defaultenv-2/menu/menu/mainmenu | 6 +- defaultenv-2/menu/menu/settings | 21 + drivers/Kconfig | 2 +- drivers/Makefile | 2 +- drivers/ata/ahci.c | 170 +- drivers/ata/ahci.h | 1 - drivers/ata/disk_ata_drive.c | 63 +- drivers/base/bus.c | 7 +- drivers/base/driver.c | 2 +- drivers/clk/clk-fixed.c | 2 +- drivers/clk/clk-gate.c | 14 + drivers/clk/clk.c | 61 +- drivers/clk/clkdev.c | 5 +- drivers/clocksource/Kconfig | 4 + drivers/clocksource/Makefile | 1 + drivers/clocksource/clps711x.c | 61 + drivers/eeprom/at24.c | 2 +- drivers/eeprom/at25.c | 9 +- drivers/gpio/Kconfig | 17 + drivers/gpio/Makefile | 6 +- drivers/gpio/gpio-clps711x.c | 70 + drivers/gpio/gpio-generic.c | 428 ++++ drivers/gpio/gpio.c | 16 +- drivers/input/Kconfig | 7 + drivers/input/Makefile | 1 + drivers/input/gpio_keys.c | 2 + drivers/input/qt1070.c | 2 +- drivers/input/twl6030_pwrbtn.c | 108 + drivers/mci/imx.c | 1 - drivers/mci/mci-core.c | 19 +- drivers/mci/mci_spi.c | 9 +- drivers/mci/mxs.c | 10 +- drivers/mfd/Kconfig | 5 + drivers/mfd/Makefile | 1 + drivers/mfd/lp3972.c | 2 +- drivers/mfd/mc13xxx.c | 10 +- drivers/mfd/mc34704.c | 2 +- drivers/mfd/mc34708.c | 10 +- drivers/mfd/mc9sdz60.c | 2 +- drivers/mfd/stmpe-i2c.c | 2 +- drivers/mfd/syscon.c | 95 + drivers/mfd/twl4030.c | 2 +- drivers/mfd/twl6030.c | 2 +- drivers/mtd/core.c | 6 +- drivers/mtd/devices/m25p80.c | 7 +- drivers/mtd/devices/mtd_dataflash.c | 8 +- drivers/mtd/mtdraw.c | 8 +- drivers/mtd/nand/Kconfig | 14 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/atmel_nand.c | 4 +- drivers/mtd/nand/nand_base.c | 50 + drivers/mtd/nand/nand_bbt.c | 4 +- drivers/mtd/nand/nand_imx.c | 30 +- drivers/mtd/nand/nand_imx_bbm.c | 220 ++ drivers/mtd/nand/nand_mxs.c | 2 +- drivers/mtd/nand/nand_omap_gpmc.c | 2 +- drivers/mtd/nand/nand_s3c24xx.c | 9 +- drivers/mtd/nand/nand_write.c | 5 +- drivers/mtd/nand/nomadik_nand.c | 2 +- drivers/net/at91_ether.c | 2 +- drivers/net/fec_imx.c | 97 +- drivers/net/fec_imx.h | 1 - drivers/net/fec_mpc5200.c | 73 +- drivers/net/fec_mpc5200.h | 1 - drivers/net/ksz8864rmn.c | 8 +- drivers/net/macb.c | 5 +- drivers/net/macb.h | 2 + drivers/net/phy/phy.c | 2 +- drivers/net/xgmac.c | 8 +- drivers/of/Kconfig | 14 +- drivers/of/Makefile | 3 +- drivers/of/base.c | 372 +-- drivers/of/fdt.c | 498 ++++ drivers/of/gpio.c | 1 - drivers/of/of_net.c | 93 + drivers/serial/Kconfig | 5 + drivers/serial/Makefile | 1 + drivers/serial/arm_dcc.c | 6 +- drivers/serial/atmel.c | 9 +- drivers/serial/linux_console.c | 9 +- drivers/serial/serial_altera.c | 9 +- drivers/serial/serial_altera_jtag.c | 8 +- drivers/serial/serial_auart.c | 9 +- drivers/serial/serial_blackfin.c | 10 +- drivers/serial/serial_cadence.c | 307 +++ drivers/serial/serial_clps711x.c | 38 +- drivers/serial/serial_imx.c | 9 +- drivers/serial/serial_mpc5xxx.c | 9 +- drivers/serial/serial_netx.c | 10 +- drivers/serial/serial_ns16550.c | 13 +- drivers/serial/serial_omap4_usbboot.c | 7 +- drivers/serial/serial_pl010.c | 10 +- drivers/serial/serial_pxa.c | 8 +- drivers/serial/serial_s3c.c | 9 +- drivers/serial/stm-serial.c | 9 +- drivers/spi/mxs_spi.c | 8 +- drivers/usb/gadget/Kconfig | 8 +- fs/ext4/ext4_common.c | 12 +- fs/fs.c | 11 +- include/asm-generic/barebox.lds.h | 15 +- include/ata_drive.h | 3 + include/boot.h | 1 + include/bootsource.h | 27 + include/driver.h | 17 +- include/fdt.h | 13 + include/fec.h | 13 +- include/filetype.h | 1 + include/gpio.h | 1 + include/i2c/i2c.h | 2 +- include/libfdt_env.h | 22 - include/linux/basic_mmio_gpio.h | 69 + include/linux/clk.h | 4 +- include/linux/clkdev.h | 2 - include/linux/ioport.h | 15 + include/linux/micrel_phy.h | 9 +- include/linux/mtd/bbm.h | 92 + include/linux/mtd/mtd.h | 3 + include/linux/mtd/nand.h | 86 +- include/mfd/syscon.h | 26 + include/of.h | 110 +- include/of_net.h | 14 + include/platform_data/macb.h | 30 + include/spi/spi.h | 5 +- include/twl6030_pwrbtn.h | 9 + lib/Kconfig | 7 - lib/Makefile | 1 - lib/fdt/Makefile | 2 - lib/fdt/TODO | 3 - net/netconsole.c | 6 +- pbl/Kconfig | 10 + scripts/.gitignore | 1 + scripts/Makefile | 3 + scripts/Makefile.lib | 41 + scripts/dtc/.gitignore | 4 + scripts/dtc/Makefile | 31 + scripts/dtc/Makefile.dtc | 18 + scripts/dtc/checks.c | 759 +++++++ scripts/dtc/data.c | 269 +++ scripts/dtc/dtc-lexer.l | 250 ++ scripts/dtc/dtc-lexer.lex.c_shipped | 2195 ++++++++++++++++= ++ scripts/dtc/dtc-parser.tab.c_shipped | 2398 ++++++++++++++++= ++++ scripts/dtc/dtc-parser.tab.h_shipped | 107 + scripts/dtc/dtc-parser.y | 532 +++++ scripts/dtc/dtc.c | 260 +++ scripts/dtc/dtc.h | 270 +++ scripts/dtc/fdtdump.c | 162 ++ scripts/dtc/fdtget.c | 366 +++ scripts/dtc/fdtput.c | 362 +++ scripts/dtc/flattree.c | 933 ++++++++ scripts/dtc/fstree.c | 91 + scripts/dtc/libfdt/Makefile.libfdt | 10 + {lib/fdt =3D> scripts/dtc/libfdt}/fdt.c | 0 scripts/dtc/libfdt/fdt.h | 60 + scripts/dtc/libfdt/fdt_empty_tree.c | 84 + {lib/fdt =3D> scripts/dtc/libfdt}/fdt_ro.c | 0 {lib/fdt =3D> scripts/dtc/libfdt}/fdt_rw.c | 27 + {lib/fdt =3D> scripts/dtc/libfdt}/fdt_strerror.c | 0 {lib/fdt =3D> scripts/dtc/libfdt}/fdt_sw.c | 0 {lib/fdt =3D> scripts/dtc/libfdt}/fdt_wip.c | 0 {include =3D> scripts/dtc/libfdt}/libfdt.h | 275 ++- scripts/dtc/libfdt/libfdt_env.h | 29 + {lib/fdt =3D> scripts/dtc/libfdt}/libfdt_internal.h | 0 scripts/dtc/livetree.c | 709 ++++++ scripts/dtc/srcpos.c | 336 +++ scripts/dtc/srcpos.h | 118 + scripts/dtc/treesource.c | 284 +++ scripts/dtc/util.c | 331 +++ scripts/dtc/util.h | 153 ++ scripts/dtc/version_gen.h | 1 + scripts/setlocalversion | 192 +- scripts/zynq_mkimage.c | 86 + 423 files changed, 20175 insertions(+), 2646 deletions(-) create mode 100644 arch/arm/boards/archosg9/env/bin/init create mode 100644 arch/arm/boards/archosg9/env/boot/sd-card-android create mode 100644 arch/arm/boards/archosg9/env/boot/sd-card-linux create mode 100644 arch/arm/boards/archosg9/env/boot/usb-android create mode 100644 arch/arm/boards/archosg9/env/boot/usb-linux delete mode 100644 arch/arm/boards/archosg9/env/config create mode 100644 arch/arm/boards/archosg9/env/init/automount create mode 100644 arch/arm/boards/archosg9/env/init/bootsource delete mode 100644 arch/arm/boards/archosg9/env/init/usbboot create mode 100644 arch/arm/boards/archosg9/env/menu/mainmenu create mode 100644 arch/arm/boards/avnet-zedboard/Makefile create mode 100644 arch/arm/boards/avnet-zedboard/board.c create mode 100644 arch/arm/boards/avnet-zedboard/config.h create mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board create mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c create mode 100644 arch/arm/boards/avnet-zedboard/lowlevel.c create mode 100644 arch/arm/boards/ccxmx51/env/boot/nand delete mode 100644 arch/arm/boards/ccxmx51/env/config create mode 100644 arch/arm/boards/ccxmx51/env/config-board create mode 100644 arch/arm/boards/ccxmx51/env/init/mtdparts-nand delete mode 100644 arch/arm/boards/clep7212/env/config create mode 100644 arch/arm/boards/clep7212/env/config-board create mode 100644 arch/arm/boards/delphi-poc20/env/boot/mmc create mode 100644 arch/arm/boards/dmo-mx6-realq7/Makefile create mode 100644 arch/arm/boards/dmo-mx6-realq7/board.c create mode 100644 arch/arm/boards/dmo-mx6-realq7/config.h create mode 100644 arch/arm/boards/dmo-mx6-realq7/env/boot/mmc create mode 100644 arch/arm/boards/dmo-mx6-realq7/env/config-board create mode 100644 arch/arm/boards/dmo-mx6-realq7/env/init/automount create mode 100644 arch/arm/boards/dmo-mx6-realq7/flash_header.c create mode 100644 arch/arm/boards/dmo-mx6-realq7/lowlevel.c create mode 100644 arch/arm/boards/pcm051/mux.c create mode 100644 arch/arm/boards/pcm051/mux.h create mode 100644 arch/arm/configs/dmo-realq7_defconfig create mode 100644 arch/arm/configs/zedboard_defconfig create mode 100644 arch/arm/cpu/common.c rename arch/{mips/lib/memory.c =3D> arm/cpu/dtb.c} (50%) create mode 100644 arch/arm/dts/.gitignore create mode 100644 arch/arm/dts/Makefile create mode 100644 arch/arm/dts/skeleton.dtsi delete mode 100644 arch/arm/include/asm/clkdev.h delete mode 100644 arch/arm/mach-at91/include/mach/clkdev.h delete mode 100644 arch/arm/mach-bcm2835/include/mach/clkdev.h delete mode 100644 arch/arm/mach-clps711x/include/mach/clkdev.h create mode 100644 arch/arm/mach-clps711x/include/mach/gpio.h create mode 100644 arch/arm/mach-imx/imx-bbu-external-nand.c create mode 100644 arch/arm/mach-imx/imx6-mmdc.c delete mode 100644 arch/arm/mach-imx/include/mach/clkdev.h create mode 100644 arch/arm/mach-imx/include/mach/imx6-mmdc.h create mode 100644 arch/arm/mach-mxs/include/mach/revision.h delete mode 100644 arch/arm/mach-nomadik/include/mach/clkdev.h delete mode 100644 arch/arm/mach-omap/include/mach/xload.h create mode 100644 arch/arm/mach-omap/omap_generic.c delete mode 100644 arch/arm/mach-versatile/include/mach/clkdev.h delete mode 100644 arch/arm/mach-vexpress/include/mach/clkdev.h create mode 100644 arch/arm/mach-zynq/Kconfig create mode 100644 arch/arm/mach-zynq/Makefile create mode 100644 arch/arm/mach-zynq/clk-zynq7000.c create mode 100644 arch/arm/mach-zynq/devices.c create mode 100644 arch/arm/mach-zynq/include/mach/barebox.lds.h rename arch/arm/{mach-highbank =3D> mach-zynq}/include/mach/clkdev.h (99%) create mode 100644 arch/arm/mach-zynq/include/mach/debug_ll.h create mode 100644 arch/arm/mach-zynq/include/mach/devices.h create mode 100644 arch/arm/mach-zynq/include/mach/zynq-flash-header.h create mode 100644 arch/arm/mach-zynq/include/mach/zynq7000-regs.h create mode 100644 arch/arm/mach-zynq/zynq.c create mode 100644 common/bootsource.c create mode 100644 defaultenv-2/menu/menu/settings create mode 100644 drivers/clocksource/clps711x.c create mode 100644 drivers/gpio/gpio-clps711x.c create mode 100644 drivers/gpio/gpio-generic.c create mode 100644 drivers/input/twl6030_pwrbtn.c create mode 100644 drivers/mfd/syscon.c create mode 100644 drivers/mtd/nand/nand_imx_bbm.c create mode 100644 drivers/of/fdt.c create mode 100644 drivers/of/of_net.c create mode 100644 drivers/serial/serial_cadence.c create mode 100644 include/bootsource.h delete mode 100644 include/libfdt_env.h create mode 100644 include/linux/basic_mmio_gpio.h create mode 100644 include/linux/mtd/bbm.h create mode 100644 include/mfd/syscon.h create mode 100644 include/of_net.h create mode 100644 include/platform_data/macb.h create mode 100644 include/twl6030_pwrbtn.h delete mode 100644 lib/fdt/Makefile delete mode 100644 lib/fdt/TODO create mode 100644 scripts/dtc/.gitignore create mode 100644 scripts/dtc/Makefile create mode 100644 scripts/dtc/Makefile.dtc create mode 100644 scripts/dtc/checks.c create mode 100644 scripts/dtc/data.c create mode 100644 scripts/dtc/dtc-lexer.l create mode 100644 scripts/dtc/dtc-lexer.lex.c_shipped create mode 100644 scripts/dtc/dtc-parser.tab.c_shipped create mode 100644 scripts/dtc/dtc-parser.tab.h_shipped create mode 100644 scripts/dtc/dtc-parser.y create mode 100644 scripts/dtc/dtc.c create mode 100644 scripts/dtc/dtc.h create mode 100644 scripts/dtc/fdtdump.c create mode 100644 scripts/dtc/fdtget.c create mode 100644 scripts/dtc/fdtput.c create mode 100644 scripts/dtc/flattree.c create mode 100644 scripts/dtc/fstree.c create mode 100644 scripts/dtc/libfdt/Makefile.libfdt rename {lib/fdt =3D> scripts/dtc/libfdt}/fdt.c (100%) create mode 100644 scripts/dtc/libfdt/fdt.h create mode 100644 scripts/dtc/libfdt/fdt_empty_tree.c rename {lib/fdt =3D> scripts/dtc/libfdt}/fdt_ro.c (100%) rename {lib/fdt =3D> scripts/dtc/libfdt}/fdt_rw.c (95%) rename {lib/fdt =3D> scripts/dtc/libfdt}/fdt_strerror.c (100%) rename {lib/fdt =3D> scripts/dtc/libfdt}/fdt_sw.c (100%) rename {lib/fdt =3D> scripts/dtc/libfdt}/fdt_wip.c (100%) rename {include =3D> scripts/dtc/libfdt}/libfdt.h (83%) create mode 100644 scripts/dtc/libfdt/libfdt_env.h rename {lib/fdt =3D> scripts/dtc/libfdt}/libfdt_internal.h (100%) create mode 100644 scripts/dtc/livetree.c create mode 100644 scripts/dtc/srcpos.c create mode 100644 scripts/dtc/srcpos.h create mode 100644 scripts/dtc/treesource.c create mode 100644 scripts/dtc/util.c create mode 100644 scripts/dtc/util.h create mode 100644 scripts/dtc/version_gen.h create mode 100644 scripts/zynq_mkimage.c -- = Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox