From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1Ubnf9-0006q7-8p for barebox@lists.infradead.org; Mon, 13 May 2013 07:59:16 +0000 Date: Mon, 13 May 2013 09:58:52 +0200 From: Sascha Hauer Message-ID: <20130513075852.GG32299@pengutronix.de> References: <1368364146-6024-1-git-send-email-sebastian.hesselbarth@gmail.com> <1368364146-6024-4-git-send-email-sebastian.hesselbarth@gmail.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1368364146-6024-4-git-send-email-sebastian.hesselbarth@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 3/5] arm: initial support for Marvell Dove SoCs To: Sebastian Hesselbarth Cc: Thomas Petazzoni , barebox@lists.infradead.org, Ezequiel Garcia On Sun, May 12, 2013 at 03:09:04PM +0200, Sebastian Hesselbarth wrote: > This commit adds minimal support for the Marvell Dove SoC (88AP510) as > first SoC of the Marvell Orion family. Orion SoCs have a different timer, > therefore current mach-mvebu and Armada 370/XP Kconfig and Makefiles are > slightly modified and a new clocksource drivers is added. > > Signed-off-by: Sebastian Hesselbarth > --- > Note: Linux for Dove expects internal registers to be remapped. For more > compatibility with barebox for MVEBU, I did not remap those yet. I rather > suggest to allow to add a pre-boot hook right before linux gets booted by > barebox. Damn, I thought that the PowerPC SoCs are the only ones that have such a crazy register hiding feature. I'd really prefer that the barebox memory layout is compatible to the existing devicetrees. Otherwise we block the way of probing barebox from the devicetree and to start barebox second stage. Is it possible to remap the registers using the kwbimage tool? That way every code that runs would see the desired register layout. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox