From: "Eric Bénard" <eric@eukrea.com>
To: Christoph Fritz <chf.fritz@googlemail.com>
Cc: "barebox@lists.infradead.org" <barebox@lists.infradead.org>
Subject: Re: Installing barebox for karo-tx53 in nand-flash
Date: Tue, 14 May 2013 20:19:21 +0200 [thread overview]
Message-ID: <20130514201921.7d7ec9fe@e6520eb> (raw)
In-Reply-To: <1368551731.19898.3.camel@mars>
Hi Christoph,
Le Tue, 14 May 2013 19:15:31 +0200,
Christoph Fritz <chf.fritz@googlemail.com> a écrit :
> On Fri, 2013-05-10 at 14:53 +0200, Eric Bénard wrote:
> > > > My boot sources are nand-flash (thats where u-boot is at the moment)
> > > > (and SD-card for testing).
> > > >
> > > > I tried to flash zbarebox.bin to nand-flash. It started but with error
> > > > nand: NAND type unknown, ec,f1
> > > > nand: No NAND device found (-19)!
> > >
> > > Hm, strange. This should be a Samsung 128MiB NAND flash. The id is in
> > > the database. I currently have no good idea why this isa unknown.
> > >
> > may you please try with his patch :
> > http://lists.infradead.org/pipermail/barebox/2013-May/014470.html
> > and tell if that solves this NAND flash issue.
>
> Successfully tested your patch on an omap3-board: NAND detection works
> again. Without the patch I get the same kind of error as above.
>
OK thanks for the testing. I'll send an updated patch (cosmetic fix)
tomorrow.
Best regards
Eric
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2013-05-14 18:19 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-07 12:33 Installing barebox for karo-tx53 Dr. Patrick Langfeld
2013-05-07 17:55 ` Sascha Hauer
2013-05-10 9:20 ` Re[2]: Installing barebox for karo-tx53 in nand-flash Dr. Patrick Langfeld
2013-05-10 10:53 ` Sascha Hauer
2013-05-10 12:35 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-10 12:53 ` Eric Bénard
2013-05-14 17:15 ` Christoph Fritz
2013-05-14 18:19 ` Eric Bénard [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130514201921.7d7ec9fe@e6520eb \
--to=eric@eukrea.com \
--cc=barebox@lists.infradead.org \
--cc=chf.fritz@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox