* [PATCH 1/3] ARM: ccmx51: Export available module GPIOs to barebox userspace
@ 2013-06-10 7:13 Alexander Shiyan
2013-06-10 7:13 ` [PATCH 2/3] ARM: ccmx51js: Add WP-pin definition for SDHC3 Alexander Shiyan
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Alexander Shiyan @ 2013-06-10 7:13 UTC (permalink / raw)
To: barebox
Patch will help to develop user devices connected to module, so
user can operate GPIOs in barebox console.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boards/ccxmx51/ccxmx51.c | 24 ++++++++++++++++++++++++
arch/arm/boards/ccxmx51/ccxmx51js.c | 1 -
2 files changed, 24 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/ccxmx51/ccxmx51.c b/arch/arm/boards/ccxmx51/ccxmx51.c
index 7f92043..d34759a 100644
--- a/arch/arm/boards/ccxmx51/ccxmx51.c
+++ b/arch/arm/boards/ccxmx51/ccxmx51.c
@@ -176,6 +176,30 @@ static iomux_v3_cfg_t ccxmx51_pads[] = {
MX51_PAD_GPIO1_7__GPIO1_7,
/* MMA7455LR IRQ2 (GPIO1.6) */
MX51_PAD_GPIO1_6__GPIO1_6,
+ /* User GPIOs */
+ MX51_PAD_GPIO1_0__GPIO1_0,
+ MX51_PAD_GPIO1_1__GPIO1_1,
+ MX51_PAD_GPIO1_8__GPIO1_8,
+ MX51_PAD_DI1_PIN11__GPIO3_0,
+ MX51_PAD_DI1_PIN12__GPIO3_1,
+ MX51_PAD_DI1_PIN13__GPIO3_2,
+ MX51_PAD_DI1_D0_CS__GPIO3_3,
+ MX51_PAD_DI1_D1_CS__GPIO3_4,
+ MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
+ MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
+ MX51_PAD_DISPB2_SER_CLK__GPIO3_7,
+ MX51_PAD_DISPB2_SER_RS__GPIO3_8,
+ MX51_PAD_NANDF_RB1__GPIO3_9,
+ MX51_PAD_NANDF_RB2__GPIO3_10,
+ MX51_PAD_NANDF_RB3__GPIO3_11,
+ MX51_PAD_CSI1_D8__GPIO3_12,
+ MX51_PAD_CSI1_D9__GPIO3_13,
+ MX51_PAD_NANDF_CS1__GPIO3_17,
+ MX51_PAD_NANDF_CS2__GPIO3_18,
+ MX51_PAD_NANDF_CS3__GPIO3_19,
+ MX51_PAD_NANDF_CS4__GPIO3_20,
+ MX51_PAD_NANDF_CS5__GPIO3_21,
+ MX51_PAD_NANDF_CS6__GPIO3_22,
};
#define CCXMX51_ECSPI1_CS0 IMX_GPIO_NR(4, 24)
diff --git a/arch/arm/boards/ccxmx51/ccxmx51js.c b/arch/arm/boards/ccxmx51/ccxmx51js.c
index ae31caf..7d269c3 100644
--- a/arch/arm/boards/ccxmx51/ccxmx51js.c
+++ b/arch/arm/boards/ccxmx51/ccxmx51js.c
@@ -63,7 +63,6 @@ static iomux_v3_cfg_t ccxmx51js_pads[] = {
MX51_PAD_USBH1_DATA5__USBH1_DATA5,
MX51_PAD_USBH1_DATA6__USBH1_DATA6,
MX51_PAD_USBH1_DATA7__USBH1_DATA7,
- MX51_PAD_DISPB2_SER_RS__GPIO3_8, /* Reset */
};
static struct esdhc_platform_data sdhc1_pdata = {
--
1.8.1.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH 2/3] ARM: ccmx51js: Add WP-pin definition for SDHC3
2013-06-10 7:13 [PATCH 1/3] ARM: ccmx51: Export available module GPIOs to barebox userspace Alexander Shiyan
@ 2013-06-10 7:13 ` Alexander Shiyan
2013-06-10 7:13 ` [PATCH 3/3] ARM: ccmx51: Return error if module is not detected Alexander Shiyan
2013-06-11 15:33 ` [PATCH 1/3] ARM: ccmx51: Export available module GPIOs to barebox userspace Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Alexander Shiyan @ 2013-06-10 7:13 UTC (permalink / raw)
To: barebox
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boards/ccxmx51/ccxmx51js.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boards/ccxmx51/ccxmx51js.c b/arch/arm/boards/ccxmx51/ccxmx51js.c
index 7d269c3..1cf7d53 100644
--- a/arch/arm/boards/ccxmx51/ccxmx51js.c
+++ b/arch/arm/boards/ccxmx51/ccxmx51js.c
@@ -29,7 +29,8 @@
#include "ccxmx51.h"
-#define CCXMX51JS_USBHOST1_RESET IMX_GPIO_NR(3, 8)
+#define CCXMX51JS_USBH1_RESET IMX_GPIO_NR(3, 8)
+#define CCXMX51JS_SD3_WP IMX_GPIO_NR(3, 17)
static iomux_v3_cfg_t ccxmx51js_pads[] = {
/* SD1 */
@@ -73,7 +74,8 @@ static struct esdhc_platform_data sdhc1_pdata = {
static struct esdhc_platform_data sdhc3_pdata = {
.cd_type = ESDHC_CD_NONE,
- .wp_type = ESDHC_WP_NONE,
+ .wp_type = ESDHC_WP_GPIO,
+ .wp_gpio = CCXMX51JS_SD3_WP,
.caps = MMC_MODE_4BIT | MMC_MODE_8BIT,
};
@@ -91,9 +93,9 @@ static int ccxmx51js_init(void)
imx51_add_mmc2(&sdhc3_pdata);
}
- gpio_direction_output(CCXMX51JS_USBHOST1_RESET, 0);
+ gpio_direction_output(CCXMX51JS_USBH1_RESET, 0);
mdelay(10);
- gpio_set_value(CCXMX51JS_USBHOST1_RESET, 1);
+ gpio_set_value(CCXMX51JS_USBH1_RESET, 1);
mdelay(10);
imx51_add_usbh1(&ccxmx51js_usbhost1_pdata);
--
1.8.1.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH 3/3] ARM: ccmx51: Return error if module is not detected
2013-06-10 7:13 [PATCH 1/3] ARM: ccmx51: Export available module GPIOs to barebox userspace Alexander Shiyan
2013-06-10 7:13 ` [PATCH 2/3] ARM: ccmx51js: Add WP-pin definition for SDHC3 Alexander Shiyan
@ 2013-06-10 7:13 ` Alexander Shiyan
2013-06-11 15:33 ` [PATCH 1/3] ARM: ccmx51: Export available module GPIOs to barebox userspace Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Alexander Shiyan @ 2013-06-10 7:13 UTC (permalink / raw)
To: barebox
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boards/ccxmx51/ccxmx51.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/ccxmx51/ccxmx51.c b/arch/arm/boards/ccxmx51/ccxmx51.c
index d34759a..e60a101 100644
--- a/arch/arm/boards/ccxmx51/ccxmx51.c
+++ b/arch/arm/boards/ccxmx51/ccxmx51.c
@@ -415,7 +415,8 @@ static int ccxmx51_devices_init(void)
printf("Module Serial : %c%d\n", manloc, ((hwid[2] & 0x3f) << 24) | (hwid[3] << 16) | (hwid[4] << 8) | hwid[5]);
if ((ccxmx51_id->mem_sz - SZ_128M) > 0)
arm_add_mem_device("ram1", MX51_CSD0_BASE_ADDR + SZ_128M, ccxmx51_id->mem_sz - SZ_128M);
- }
+ } else
+ return -ENOSYS;
imx51_add_uart1();
imx51_add_uart2();
--
1.8.1.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH 1/3] ARM: ccmx51: Export available module GPIOs to barebox userspace
2013-06-10 7:13 [PATCH 1/3] ARM: ccmx51: Export available module GPIOs to barebox userspace Alexander Shiyan
2013-06-10 7:13 ` [PATCH 2/3] ARM: ccmx51js: Add WP-pin definition for SDHC3 Alexander Shiyan
2013-06-10 7:13 ` [PATCH 3/3] ARM: ccmx51: Return error if module is not detected Alexander Shiyan
@ 2013-06-11 15:33 ` Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2013-06-11 15:33 UTC (permalink / raw)
To: Alexander Shiyan; +Cc: barebox
On Mon, Jun 10, 2013 at 11:13:18AM +0400, Alexander Shiyan wrote:
> Patch will help to develop user devices connected to module, so
> user can operate GPIOs in barebox console.
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Applied, thanks
Sascha
> ---
> arch/arm/boards/ccxmx51/ccxmx51.c | 24 ++++++++++++++++++++++++
> arch/arm/boards/ccxmx51/ccxmx51js.c | 1 -
> 2 files changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boards/ccxmx51/ccxmx51.c b/arch/arm/boards/ccxmx51/ccxmx51.c
> index 7f92043..d34759a 100644
> --- a/arch/arm/boards/ccxmx51/ccxmx51.c
> +++ b/arch/arm/boards/ccxmx51/ccxmx51.c
> @@ -176,6 +176,30 @@ static iomux_v3_cfg_t ccxmx51_pads[] = {
> MX51_PAD_GPIO1_7__GPIO1_7,
> /* MMA7455LR IRQ2 (GPIO1.6) */
> MX51_PAD_GPIO1_6__GPIO1_6,
> + /* User GPIOs */
> + MX51_PAD_GPIO1_0__GPIO1_0,
> + MX51_PAD_GPIO1_1__GPIO1_1,
> + MX51_PAD_GPIO1_8__GPIO1_8,
> + MX51_PAD_DI1_PIN11__GPIO3_0,
> + MX51_PAD_DI1_PIN12__GPIO3_1,
> + MX51_PAD_DI1_PIN13__GPIO3_2,
> + MX51_PAD_DI1_D0_CS__GPIO3_3,
> + MX51_PAD_DI1_D1_CS__GPIO3_4,
> + MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
> + MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
> + MX51_PAD_DISPB2_SER_CLK__GPIO3_7,
> + MX51_PAD_DISPB2_SER_RS__GPIO3_8,
> + MX51_PAD_NANDF_RB1__GPIO3_9,
> + MX51_PAD_NANDF_RB2__GPIO3_10,
> + MX51_PAD_NANDF_RB3__GPIO3_11,
> + MX51_PAD_CSI1_D8__GPIO3_12,
> + MX51_PAD_CSI1_D9__GPIO3_13,
> + MX51_PAD_NANDF_CS1__GPIO3_17,
> + MX51_PAD_NANDF_CS2__GPIO3_18,
> + MX51_PAD_NANDF_CS3__GPIO3_19,
> + MX51_PAD_NANDF_CS4__GPIO3_20,
> + MX51_PAD_NANDF_CS5__GPIO3_21,
> + MX51_PAD_NANDF_CS6__GPIO3_22,
> };
>
> #define CCXMX51_ECSPI1_CS0 IMX_GPIO_NR(4, 24)
> diff --git a/arch/arm/boards/ccxmx51/ccxmx51js.c b/arch/arm/boards/ccxmx51/ccxmx51js.c
> index ae31caf..7d269c3 100644
> --- a/arch/arm/boards/ccxmx51/ccxmx51js.c
> +++ b/arch/arm/boards/ccxmx51/ccxmx51js.c
> @@ -63,7 +63,6 @@ static iomux_v3_cfg_t ccxmx51js_pads[] = {
> MX51_PAD_USBH1_DATA5__USBH1_DATA5,
> MX51_PAD_USBH1_DATA6__USBH1_DATA6,
> MX51_PAD_USBH1_DATA7__USBH1_DATA7,
> - MX51_PAD_DISPB2_SER_RS__GPIO3_8, /* Reset */
> };
>
> static struct esdhc_platform_data sdhc1_pdata = {
> --
> 1.8.1.5
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-06-11 15:33 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-06-10 7:13 [PATCH 1/3] ARM: ccmx51: Export available module GPIOs to barebox userspace Alexander Shiyan
2013-06-10 7:13 ` [PATCH 2/3] ARM: ccmx51js: Add WP-pin definition for SDHC3 Alexander Shiyan
2013-06-10 7:13 ` [PATCH 3/3] ARM: ccmx51: Return error if module is not detected Alexander Shiyan
2013-06-11 15:33 ` [PATCH 1/3] ARM: ccmx51: Export available module GPIOs to barebox userspace Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox