From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1Umg6H-0007MQ-G8 for barebox@lists.infradead.org; Wed, 12 Jun 2013 08:08:15 +0000 Date: Wed, 12 Jun 2013 10:07:47 +0200 From: Sascha Hauer Message-ID: <20130612080747.GV32299@pengutronix.de> References: <51B0B2D6.3030407@knowtrek.com> <51B5C56C.4050801@knowtrek.com> <51B6066A.5020801@knowtrek.com> <1370884028.154515180@f150.mail.ru> <51B60B95.8020506@knowtrek.com> <20130610172901.GN32299@pengutronix.de> <51B8113F.2050207@knowtrek.com> <51B82114.7080004@knowtrek.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <51B82114.7080004@knowtrek.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: how to flash barebox and set root variable? - barebox is gone :( To: Adam Furmanczuk Cc: barebox@lists.infradead.org On Wed, Jun 12, 2013 at 09:19:48AM +0200, Adam Furmanczuk wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On 12.06.2013 08:12, Adam Furmanczuk wrote: > > ********* *POCZATEK CZESCI SZYFROWANEJ / PODPISANEJ* ********* > > > > On 10.06.2013 19:29, Sascha Hauer wrote: > >>> On Mon, Jun 10, 2013 at 07:23:33PM +0200, Adam Furmanczuk > >>> wrote: > >>>>> On 10.06.2013 19:07, Alexander Shiyan wrote: > >>>>>>>>> flashing barebox.bin to /dev/nor0.kernel > >>>>>>>>>>> Unknown command 'tftp' - try 'help' > >>>>>>> Seems tftp command is not compiled in. Ensure that you > >>>>>>> have CONFIG_CMD_TFTP in your .config. > >>>>> Thanks Alexander, > >>>>> > >>>>> but my barebox binary is gone . Have been a bit careles... > >>>>> I would need to flash the binary over my OCD USB > >>>>> controller, but do not realy have a clue how to do this. I > >>>>> am waiting for support reply for this ICnova iMX536 SODIMM > >>>>> module, they should give me some steps how to proceed. > >>> [...] CONFIG_ARCH_IMX_USBLOADER in a recent barebox. After > >>> compiling you will have scripts/imx/imx-usb-loader > > Hi Sascha, > > > > I have included the option: CONFIG_ARCH_IMX_USBLOADER=y then run > > make clean and then make again, but there is no such file, tried to > > search recursively for similar file in barebox top directory with: > > find ./ -iname \*usb-loader\* > > > > My bad, i got the latest git snaphot (699-bcc9) and there is > USBLOADER.. have still some issues with compiling it. > There is "memory bank" error [1]. Have seen there was a patch > recently, but do not know the option to enable/disable When CONFIG_ARCH_IMX_USBLOADER is enabled in your config you can do: make scripts/imx/ This should build the tool only. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox