From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-wi0-x232.google.com ([2a00:1450:400c:c05::232]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1UnNys-0007yK-7Q for barebox@lists.infradead.org; Fri, 14 Jun 2013 06:59:31 +0000 Received: by mail-wi0-f178.google.com with SMTP id k10so155185wiv.11 for ; Thu, 13 Jun 2013 23:59:05 -0700 (PDT) Date: Fri, 14 Jun 2013 09:02:15 +0200 From: Alexander Aring Message-ID: <20130614070213.GA13398@x61s.8.8.8.8> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: NAND + imx53, BBT/timings? To: Vanhauwaert Wouter Cc: "barebox@lists.infradead.org" Hi, On Thu, Jun 13, 2013 at 09:09:11AM +0200, Vanhauwaert Wouter wrote: > Hi all, > > I'm working on a custom design which has an imx53 and a 1GB NAND flash (Samsung k9k8g08u0d) via an 8 bit bus. > So I added this imx_nand_platform_data structure with a .width=1, .hw_ecc=1 and .flash_bbt=1. > The flash gets detected at startup (also loads the bootloader from it). > > nand: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit), page size 2048, OOB size:64 > but then > nand: Bad block table not found for chip 0 > nand: Bad block table not found for chip 0 > > etc > > and when I do imx_nand_bbm, I get: > Bad eraseblock 0 at 0x00000000 > Bad eraseblock 1 at 0x00020000 > And for the rest UnCorrectable RS-ECC errors > > This is a barenew flash, so I suppose I should find a factory bad block table? No, this is a another bad block table. [1] You need to generate the bbt. Factories only marks block as bad(with an mark pattern). > I'm using the barebox 2013.05.1 stable release from git > You can "try" to generate a bbt when you generate a nand bad block aware device, nand command "nand -a", then run "nandtest -t -m /dev/nand#.bb" to fill this bbt with "current" badblocks. I don't know if this generates a bbt for you. But give it a try, I think it should do :/ [1] http://www.linux-mtd.infradead.org/tech/mtdnand/x144.html _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox