From: Sascha Hauer <s.hauer@pengutronix.de>
To: Alexander Shiyan <shc_work@mail.ru>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] ARM: pcm038: Add setup for MC13783 IRQ pin
Date: Mon, 17 Jun 2013 10:19:35 +0200 [thread overview]
Message-ID: <20130617081935.GO32299@pengutronix.de> (raw)
In-Reply-To: <1371303724-27020-1-git-send-email-shc_work@mail.ru>
On Sat, Jun 15, 2013 at 05:42:04PM +0400, Alexander Shiyan wrote:
> Kernel does not have pinctrl driver for i.MX27 yet. When we using DT,
> this cause to unable setup pins to desired function. This patch adds
> a setup for MC13783 IRQ pin to avoid this issue.
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Applied, thanks
Sascha
> ---
> arch/arm/boards/pcm038/pcm038.c | 15 +++++++++------
> 1 file changed, 9 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boards/pcm038/pcm038.c b/arch/arm/boards/pcm038/pcm038.c
> index dec5164..f6a3e17 100644
> --- a/arch/arm/boards/pcm038/pcm038.c
> +++ b/arch/arm/boards/pcm038/pcm038.c
> @@ -46,9 +46,10 @@
>
> #include "pll.h"
>
> +#define PCM038_GPIO_PMIC_IRQ (GPIO_PORTB + 23)
> #define PCM038_GPIO_FEC_RST (GPIO_PORTC + 30)
> -#define PCM038_GPIO_SPI_CS0 (GPIO_PORTD + 28)
> #define PCM970_GPIO_SPI_CS1 (GPIO_PORTD + 27)
> +#define PCM038_GPIO_SPI_CS0 (GPIO_PORTD + 28)
> #define PCM038_GPIO_OTG_STP (GPIO_PORTE + 1)
>
> static struct fec_platform_data fec_info = {
> @@ -225,7 +226,6 @@ static int pcm038_devices_init(void)
> PD15_AOUT_FEC_COL,
> PD16_AIN_FEC_TX_ER,
> PF23_AIN_FEC_TX_EN,
> - PCM038_GPIO_FEC_RST | GPIO_GPIO | GPIO_OUT,
> /* UART1 */
> PE12_PF_UART1_TXD,
> PE13_PF_UART1_RXD,
> @@ -236,10 +236,6 @@ static int pcm038_devices_init(void)
> PD29_PF_CSPI1_SCLK,
> PD30_PF_CSPI1_MISO,
> PD31_PF_CSPI1_MOSI,
> - PCM038_GPIO_SPI_CS0 | GPIO_GPIO | GPIO_OUT,
> -#ifdef CONFIG_MACH_PCM970_BASEBOARD
> - PCM970_GPIO_SPI_CS1 | GPIO_GPIO | GPIO_OUT,
> -#endif
> /* Display */
> PA5_PF_LSCLK,
> PA6_PF_LD0,
> @@ -287,6 +283,13 @@ static int pcm038_devices_init(void)
> /* I2C2 */
> PC5_PF_I2C2_SDA,
> PC6_PF_I2C2_SCL,
> + /* Misc */
> + PCM038_GPIO_FEC_RST | GPIO_GPIO | GPIO_OUT,
> + PCM038_GPIO_SPI_CS0 | GPIO_GPIO | GPIO_OUT,
> +#ifdef CONFIG_MACH_PCM970_BASEBOARD
> + PCM970_GPIO_SPI_CS1 | GPIO_GPIO | GPIO_OUT,
> +#endif
> + PCM038_GPIO_PMIC_IRQ | GPIO_GPIO | GPIO_IN,
> };
>
> /* configure 16 bit nor flash on cs0 */
> --
> 1.8.1.5
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2013-06-17 8:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-15 13:42 Alexander Shiyan
2013-06-17 8:19 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130617081935.GO32299@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=shc_work@mail.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox