* [PATCH 1/2] omap-fb: add driver
@ 2013-06-19 9:33 Christoph Fritz
2013-06-19 9:39 ` [PATCH 2/2] ARM omap-fb: add board helper code Christoph Fritz
2013-06-24 13:32 ` [PATCH 1/2] omap-fb: add driver Christoph Fritz
0 siblings, 2 replies; 4+ messages in thread
From: Christoph Fritz @ 2013-06-19 9:33 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox, Tomi Valkeinen
This patch adds omap display controller support. Currently only
OMAP4 DSS is supported.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
---
drivers/video/Kconfig | 8 +
drivers/video/Makefile | 1 +
drivers/video/omap.c | 524 ++++++++++++++++++++++++++++++++++++++++++++++++
drivers/video/omap.h | 187 +++++++++++++++++
4 files changed, 720 insertions(+)
create mode 100644 drivers/video/omap.c
create mode 100644 drivers/video/omap.h
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6d6b08f..0639d9c 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -45,6 +45,14 @@ config DRIVER_VIDEO_S3C24XX
help
Add support for the S3C244x LCD controller.
+config DRIVER_VIDEO_OMAP
+ bool "OMAP framebuffer driver"
+ depends on ARCH_OMAP4
+ help
+ Add support for OMAP Display Controller. Currently this
+ driver only supports OMAP4 SoCs in DISPC parallel mode on
+ LCD2 (MIPI DPI).
+
if DRIVER_VIDEO_S3C24XX
config DRIVER_VIDEO_S3C_VERBOSE
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 7429141..67169d1 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_DRIVER_VIDEO_IMX_IPU) += imx-ipu-fb.o
obj-$(CONFIG_DRIVER_VIDEO_S3C24XX) += s3c24xx.o
obj-$(CONFIG_DRIVER_VIDEO_PXA) += pxa.o
obj-$(CONFIG_DRIVER_VIDEO_SDL) += sdl.o
+obj-$(CONFIG_DRIVER_VIDEO_OMAP) += omap.o
diff --git a/drivers/video/omap.c b/drivers/video/omap.c
new file mode 100644
index 0000000..487aca6
--- /dev/null
+++ b/drivers/video/omap.c
@@ -0,0 +1,524 @@
+/*
+ * TI Omap Frame Buffer device driver
+ *
+ * Copyright (C) 2013 Christoph Fritz <chf.fritz@googlemail.com>
+ * Based on work by Enrico Scholz, sponsored by Phytec
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <driver.h>
+#include <fb.h>
+#include <errno.h>
+#include <xfuncs.h>
+#include <init.h>
+#include <stdio.h>
+#include <io.h>
+#include <common.h>
+#include <malloc.h>
+#include <common.h>
+#include <clock.h>
+
+#include <mach/omap4-silicon.h>
+#include <mach/omap-fb.h>
+
+#include <asm/mmu.h>
+
+#include "omap.h"
+
+struct omapfb_device {
+ struct fb_info info;
+ struct device_d *dev;
+
+ struct omapfb_display const *cur_display;
+
+ struct omapfb_display const *displays;
+ size_t num_displays;
+
+ void __iomem *dss;
+ void __iomem *dispc;
+
+ struct {
+ void __iomem *addr;
+ size_t size;
+ } prealloc_screen;
+
+ struct {
+ uint32_t dispc_control;
+ uint32_t dispc_pol_freq;
+ } shadow;
+
+ struct {
+ unsigned int dss_clk_hz;
+ unsigned int lckd;
+ unsigned int pckd;
+ } divisor;
+ size_t dma_size;
+ void (*enable_fn)(int);
+
+ struct fb_videomode video_modes[];
+};
+
+static inline struct omapfb_device *to_omapfb(const struct fb_info *info)
+{
+ return container_of(info, struct omapfb_device, info);
+}
+
+static void omapfb_enable(struct fb_info *info)
+{
+ struct omapfb_device *fbi = to_omapfb(info);
+
+ dev_dbg(fbi->dev, "%s\n", __func__);
+
+ if (!fbi->cur_display) {
+ dev_err(fbi->dev, "no valid mode set\n");
+ return;
+ }
+
+ if (fbi->enable_fn)
+ fbi->enable_fn(1);
+
+ udelay(fbi->cur_display->power_on_delay * 1000u);
+
+ o4_dispc_write(o4_dispc_read(O4_DISPC_CONTROL2) |
+ DSS_DISPC_CONTROL_LCDENABLE |
+ DSS_DISPC_CONTROL_LCDENABLESIGNAL, O4_DISPC_CONTROL2);
+
+ o4_dispc_write(o4_dispc_read(O4_DISPC_VID1_ATTRIBUTES) |
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDENABLE, O4_DISPC_VID1_ATTRIBUTES);
+
+ o4_dispc_write(o4_dispc_read(O4_DISPC_CONTROL2) |
+ DSS_DISPC_CONTROL_GOLCD, O4_DISPC_CONTROL2);
+}
+
+static void omapfb_disable(struct fb_info *info)
+{
+ struct omapfb_device *fbi = to_omapfb(info);
+
+ dev_dbg(fbi->dev, "%s\n", __func__);
+
+ if (!fbi->cur_display) {
+ dev_err(fbi->dev, "no valid mode set\n");
+ return;
+ }
+
+ o4_dispc_write(o4_dispc_read(O4_DISPC_CONTROL2) &
+ ~(DSS_DISPC_CONTROL_LCDENABLE |
+ DSS_DISPC_CONTROL_LCDENABLESIGNAL), O4_DISPC_CONTROL2);
+
+ o4_dispc_write(o4_dispc_read(O4_DISPC_VID1_ATTRIBUTES) &
+ ~(DSS_DISPC_VIDn_ATTRIBUTES_VIDENABLE),
+ O4_DISPC_VID1_ATTRIBUTES);
+
+ if (fbi->prealloc_screen.addr == NULL) {
+ /* free frame buffer; but only when screen is not
+ * preallocated */
+ if (info->screen_base)
+ dma_free_coherent(info->screen_base, fbi->dma_size);
+ }
+
+ info->screen_base = NULL;
+
+ udelay(fbi->cur_display->power_off_delay * 1000u);
+
+ if (fbi->enable_fn)
+ fbi->enable_fn(0);
+}
+
+static void omapfb_calc_divisor(struct omapfb_device *fbi,
+ struct fb_videomode const *mode)
+{
+ unsigned int l, k, t, b;
+
+ b = UINT_MAX;
+ for (l = 1; l < 256; l++) {
+ for (k = 1; k < 256; k++) {
+ t = abs(mode->pixclock * 100 -
+ (fbi->divisor.dss_clk_hz / l / k));
+ if (t <= b) {
+ b = t;
+ fbi->divisor.lckd = l;
+ fbi->divisor.pckd = k;
+ }
+ }
+ }
+}
+
+static unsigned int omapfb_calc_format(struct fb_info const *info)
+{
+ struct omapfb_device *fbi = to_omapfb(info);
+
+ switch (info->bits_per_pixel) {
+ case 24:
+ return 9;
+ case 32:
+ return 0x8; /* xRGB24-8888 (32-bit container) */
+ default:
+ dev_err(fbi->dev, "%s: unsupported bpp %d\n", __func__,
+ info->bits_per_pixel);
+ return 0;
+ }
+}
+
+struct omapfb_colors {
+ struct fb_bitfield red;
+ struct fb_bitfield green;
+ struct fb_bitfield blue;
+ struct fb_bitfield transp;
+};
+
+static struct omapfb_colors const omapfb_col[] = {
+ [0] = {
+ .red = { .length = 0, .offset = 0 },
+ },
+ [1] = {
+ .blue = { .length = 8, .offset = 0 },
+ .green = { .length = 8, .offset = 8 },
+ .red = { .length = 8, .offset = 16 },
+ },
+ [2] = {
+ .blue = { .length = 8, .offset = 0 },
+ .green = { .length = 8, .offset = 8 },
+ .red = { .length = 8, .offset = 16 },
+ .transp = { .length = 8, .offset = 24 },
+ },
+};
+
+static void omapfb_fill_shadow(struct omapfb_device *fbi,
+ struct omapfb_display const *display)
+{
+ fbi->shadow.dispc_control = 0;
+ fbi->shadow.dispc_pol_freq = 0;
+
+ fbi->shadow.dispc_control |= DSS_DISPC_CONTROL_STNTFT;
+
+ switch (display->config & OMAP_DSS_LCD_DATALINES_msk) {
+ case OMAP_DSS_LCD_DATALINES_12:
+ fbi->shadow.dispc_control |= DSS_DISPC_CONTROL_TFTDATALINES_12;
+ break;
+ case OMAP_DSS_LCD_DATALINES_16:
+ fbi->shadow.dispc_control |= DSS_DISPC_CONTROL_TFTDATALINES_16;
+ break;
+ case OMAP_DSS_LCD_DATALINES_18:
+ fbi->shadow.dispc_control |= DSS_DISPC_CONTROL_TFTDATALINES_18;
+ break;
+ case OMAP_DSS_LCD_DATALINES_24:
+ fbi->shadow.dispc_control |= DSS_DISPC_CONTROL_TFTDATALINES_24;
+ break;
+ }
+
+ if (display->config & OMAP_DSS_LCD_IPC)
+ fbi->shadow.dispc_pol_freq |= DSS_DISPC_POL_FREQ_IPC;
+
+ if (display->config & OMAP_DSS_LCD_IVS)
+ fbi->shadow.dispc_pol_freq |= DSS_DISPC_POL_FREQ_IVS;
+
+ if (display->config & OMAP_DSS_LCD_IHS)
+ fbi->shadow.dispc_pol_freq |= DSS_DISPC_POL_FREQ_IHS;
+
+ if (display->config & OMAP_DSS_LCD_IEO)
+ fbi->shadow.dispc_pol_freq |= DSS_DISPC_POL_FREQ_IEO;
+
+ if (display->config & OMAP_DSS_LCD_RF)
+ fbi->shadow.dispc_pol_freq |= DSS_DISPC_POL_FREQ_RF;
+
+ if (display->config & OMAP_DSS_LCD_ONOFF)
+ fbi->shadow.dispc_pol_freq |= DSS_DISPC_POL_FREQ_ONOFF;
+}
+
+static int omapfb_find_display_by_name(struct omapfb_device *fbi,
+ const char *name)
+{
+ int i;
+
+ for (i = 0; i < fbi->num_displays; ++i) {
+ if (strcmp(name, fbi->displays[i].mode.name) == 0)
+ return i;
+ }
+ return -ENXIO;
+}
+
+static int omapfb_activate_var(struct fb_info *info)
+{
+ struct omapfb_device *fbi = to_omapfb(info);
+ struct fb_videomode const *mode = info->mode;
+ size_t size = mode->xres * mode->yres * (info->bits_per_pixel / 8);
+ int rc;
+ unsigned int fmt = omapfb_calc_format(info);
+ struct omapfb_colors const *cols;
+ struct omapfb_display const *new_display = NULL;
+
+ rc = omapfb_find_display_by_name(fbi, mode->name);
+ if (rc < 0) {
+ dev_err(fbi->dev, "no display found for this mode '%s'\n",
+ mode->name);
+ goto out;
+ }
+ new_display = &fbi->displays[rc];
+
+ /*Free old screen buf*/
+ if (!fbi->prealloc_screen.addr && info->screen_base)
+ dma_free_coherent(info->screen_base, fbi->dma_size);
+
+ fbi->dma_size = PAGE_ALIGN(size);
+
+ if (!fbi->prealloc_screen.addr) {
+ /* case 1: no preallocated screen */
+ info->screen_base = dma_alloc_coherent(size);
+ } else if (fbi->prealloc_screen.size < fbi->dma_size) {
+ /* case 2: preallocated screen, but too small */
+ dev_err(fbi->dev,
+ "allocated framebuffer too small (%zu < %zu)\n",
+ fbi->prealloc_screen.size, fbi->dma_size);
+ rc = -ENOMEM;
+ goto out;
+ } else {
+ /* case 3: preallocated screen */
+ info->screen_base = fbi->prealloc_screen.addr;
+ }
+
+ omapfb_fill_shadow(fbi, new_display);
+
+ omapfb_calc_divisor(fbi, mode);
+
+ switch (info->bits_per_pixel) {
+ case 24:
+ cols = &omapfb_col[1];
+ break;
+ case 32:
+ cols = &omapfb_col[2];
+ break;
+ default:
+ cols = &omapfb_col[0];
+ }
+
+ info->red = cols->red;
+ info->green = cols->green;
+ info->blue = cols->blue;
+ info->transp = cols->transp;
+
+ o4_dispc_write(fbi->shadow.dispc_control, O4_DISPC_CONTROL2);
+
+ o4_dispc_write(fbi->shadow.dispc_pol_freq, O4_DISPC_POL_FREQ2);
+
+ o4_dispc_write(DSS_DISPC_TIMING_H_HSW(mode->hsync_len - 1) |
+ DSS_DISPC_TIMING_H_HFP(mode->right_margin - 1) |
+ DSS_DISPC_TIMING_H_HBP(mode->left_margin - 1),
+ O4_DISPC_TIMING_H2);
+
+ o4_dispc_write(DSS_DISPC_TIMING_V_VSW(mode->vsync_len - 1) |
+ DSS_DISPC_TIMING_V_VFP(mode->lower_margin) |
+ DSS_DISPC_TIMING_V_VBP(mode->upper_margin), O4_DISPC_TIMING_V2);
+
+ o4_dispc_write(DSS_DISPC_DIVISOR_ENABLE | DSS_DISPC_DIVISOR_LCD(1),
+ O4_DISPC_DIVISOR);
+
+ o4_dispc_write(DSS_DISPC_DIVISOR2_LCD(fbi->divisor.lckd) |
+ DSS_DISPC_DIVISOR2_PCD(fbi->divisor.pckd), O4_DISPC_DIVISOR2);
+
+ o4_dispc_write(DSS_DISPC_SIZE_LCD_PPL(mode->xres - 1) |
+ DSS_DISPC_SIZE_LCD_LPP(mode->yres - 1), O4_DISPC_SIZE_LCD2);
+
+ o4_dispc_write(0x0000ff00, O4_DISPC_DEFAULT_COLOR2);
+
+ /* we use VID1 */
+ o4_dispc_write((uintptr_t)info->screen_base, O4_DISPC_VID1_BA0);
+ o4_dispc_write((uintptr_t)info->screen_base, O4_DISPC_VID1_BA1);
+
+ o4_dispc_write(DSS_DISPC_VIDn_POSITION_VIDPOSX(0) |
+ DSS_DISPC_VIDn_POSITION_VIDPOSY(0), O4_DISPC_VID1_POSITION);
+ o4_dispc_write(DSS_DISPC_VIDn_SIZE_VIDSIZEX(mode->xres - 1) |
+ DSS_DISPC_VIDn_SIZE_VIDSIZEY(mode->yres - 1),
+ O4_DISPC_VID1_SIZE);
+ o4_dispc_write(DSS_DISPC_VIDn_PICTURE_SIZE_VIDORGSIZEX(mode->xres - 1) |
+ DSS_DISPC_VIDn_PICTURE_SIZE_VIDORGSIZEY(mode->yres - 1),
+ O4_DISPC_VID1_PICTURE_SIZE);
+ o4_dispc_write(1, O4_DISPC_VID1_ROW_INC);
+ o4_dispc_write(1, O4_DISPC_VID1_PIXEL_INC);
+
+ o4_dispc_write(0xfff, O4_DISPC_VID1_PRELOAD);
+
+ o4_dispc_write(DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT(fmt) |
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDBURSTSIZE_8x128 |
+ DSS_DISPC_VIDn_ATTRIBUTES_ZORDERENABLE |
+ DSS_DISPC_VIDn_ATTRIBUTES_CHANNELOUT2_SECONDARY_LCD,
+ O4_DISPC_VID1_ATTRIBUTES);
+
+ rc = wait_on_timeout(OFB_TIMEOUT,
+ !(o4_dispc_read(O4_DISPC_CONTROL2) &
+ DSS_DISPC_CONTROL_GOLCD));
+
+ if (rc) {
+ dev_err(fbi->dev, "timeout: dispc golcd\n");
+ goto out;
+ }
+
+ o4_dispc_write(o4_dispc_read(O4_DISPC_CONTROL2) |
+ DSS_DISPC_CONTROL_GOLCD, O4_DISPC_CONTROL2);
+
+ fbi->cur_display = new_display;
+ info->xres = mode->xres;
+ info->yres = mode->yres;
+
+ rc = 0;
+
+out:
+ return rc;
+}
+
+static int omapfb_reset(struct omapfb_device const *fbi)
+{
+ uint32_t v = o4_dispc_read(O4_DISPC_CONTROL2);
+ int rc;
+
+ /* step 1: stop the LCD controller */
+ if (v & DSS_DISPC_CONTROL_LCDENABLE) {
+ o4_dispc_write(v & ~DSS_DISPC_CONTROL_LCDENABLE,
+ O4_DISPC_CONTROL2);
+
+ o4_dispc_write(DSS_DISPC_IRQSTATUS_FRAMEDONE2,
+ O4_DISPC_IRQSTATUS);
+
+ rc = wait_on_timeout(OFB_TIMEOUT,
+ ((o4_dispc_read(O4_DISPC_IRQSTATUS) &
+ DSS_DISPC_IRQSTATUS_FRAMEDONE) != 0));
+
+ if (rc) {
+ dev_err(fbi->dev, "timeout: irqstatus framedone\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ /* step 2: wait for reset done status */
+ rc = wait_on_timeout(OFB_TIMEOUT,
+ (o4_dss_read(O4_DSS_SYSSTATUS) &
+ DSS_DSS_SYSSTATUS_RESETDONE));
+
+ if (rc) {
+ dev_err(fbi->dev, "timeout: sysstatus resetdone\n");
+ return -ETIMEDOUT;
+ }
+
+ /* DSS_CTL: set to reset value */
+ o4_dss_write(0, O4_DSS_CTRL);
+
+ return 0;
+}
+
+static struct fb_ops omapfb_ops = {
+ .fb_enable = omapfb_enable,
+ .fb_disable = omapfb_disable,
+ .fb_activate_var = omapfb_activate_var,
+};
+
+static int omapfb_probe(struct device_d *dev)
+{
+ struct omapfb_platform_data const *pdata = dev->platform_data;
+ struct omapfb_device *fbi;
+ struct fb_info *info;
+ int rc;
+ size_t i;
+
+ fbi = xzalloc(sizeof *fbi +
+ pdata->num_displays * sizeof fbi->video_modes[0]);
+ info = &fbi->info;
+
+ fbi->dev = dev;
+
+ /* CM_DSS_CLKSTCTRL (TRM: 935) trigger SW_WKUP */
+ __raw_writel(0x2, 0x4a009100); /* TODO: move this to clockmanagement */
+
+ fbi->dss = dev_request_mem_region_by_name(dev, "omap4_dss");
+ fbi->dispc = dev_request_mem_region_by_name(dev, "omap4_dispc");
+
+ if (!fbi->dss || !fbi->dispc) {
+ dev_err(dev, "Insufficient register description\n");
+ rc = -EINVAL;
+ goto out;
+ }
+
+ dev_info(dev, "HW-Revision 0x%04x 0x%04x\n",
+ o4_dss_read(O4_DISPC_REVISION),
+ o4_dss_read(O4_DSS_REVISION));
+
+ if (!pdata->dss_clk_hz | !pdata->displays | !pdata->num_displays |
+ !pdata->bpp) {
+ dev_err(dev, "Insufficient omapfb_platform_data\n");
+ rc = -EINVAL;
+ goto out;
+ }
+
+ fbi->enable_fn = pdata->enable;
+ fbi->displays = pdata->displays;
+ fbi->num_displays = pdata->num_displays;
+ fbi->divisor.dss_clk_hz = pdata->dss_clk_hz;
+
+ for (i = 0; i < pdata->num_displays; ++i)
+ fbi->video_modes[i] = pdata->displays[i].mode;
+
+ info->mode_list = fbi->video_modes;
+ info->num_modes = pdata->num_displays;
+
+ info->priv = fbi;
+ info->fbops = &omapfb_ops;
+ info->bits_per_pixel = pdata->bpp;
+
+ if (pdata->screen) {
+ if (!IS_ALIGNED(pdata->screen->start, PAGE_SIZE) ||
+ !IS_ALIGNED(resource_size(pdata->screen), PAGE_SIZE)) {
+ dev_err(dev, "screen resource not aligned\n");
+ rc = -EINVAL;
+ goto out;
+ }
+ fbi->prealloc_screen.addr =
+ (void __iomem *)pdata->screen->start;
+ fbi->prealloc_screen.size = resource_size(pdata->screen);
+ remap_range(fbi->prealloc_screen.addr,
+ fbi->prealloc_screen.size,
+ mmu_get_pte_uncached_flags());
+ }
+
+ rc = omapfb_reset(fbi);
+ if (rc < 0) {
+ dev_err(dev, "failed to reset: %d\n", rc);
+ goto out;
+ }
+
+ rc = register_framebuffer(info);
+ if (rc < 0) {
+ dev_err(dev, "failed to register framebuffer: %d\n", rc);
+ goto out;
+ }
+
+ rc = 0;
+ dev_info(dev, "registered\n");
+
+out:
+ if (rc < 0)
+ free(fbi);
+
+ return rc;
+}
+
+static struct driver_d omapfb_driver = {
+ .name = "omap_fb",
+ .probe = omapfb_probe,
+};
+
+static int omapfb_init(void)
+{
+ return platform_driver_register(&omapfb_driver);
+}
+
+device_initcall(omapfb_init);
diff --git a/drivers/video/omap.h b/drivers/video/omap.h
new file mode 100644
index 0000000..ac9e1ce
--- /dev/null
+++ b/drivers/video/omap.h
@@ -0,0 +1,187 @@
+/*
+ * TI Omap4 Frame Buffer device driver
+ *
+ * Copyright (C) 2013 Christoph Fritz <chf.fritz@googlemail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef H_BAREBOX_DRIVER_VIDEO_OMAP4_REGS_H
+#define H_BAREBOX_DRIVER_VIDEO_OMAP4_REGS_H
+
+#include <types.h>
+#include <common.h>
+
+#define OFB_TIMEOUT (128 * USECOND)
+
+#define _ofb_read(io, reg) __raw_readl((io)+(reg))
+#define _ofb_write(val, io, reg) __raw_writel((val), (io)+(reg))
+
+/* TRM: 10.1.3.2 DSS Registers */
+#define O4_DSS_REVISION 0x0
+#define O4_DSS_SYSSTATUS 0x14
+#define O4_DSS_CTRL 0x40
+#define O4_DSS_STATUS 0x5c
+
+#define o4_dss_read(reg) _ofb_read(fbi->dss, reg)
+#define o4_dss_write(val, reg) _ofb_write(val, fbi->dss, reg)
+
+/* TRM: 10.2.7.3 Display Controller Registers */
+#define O4_DISPC_REVISION 0x0
+#define O4_DISPC_IRQSTATUS 0x18
+#define O4_DISPC_VID1_BA0 0xbc
+#define O4_DISPC_VID1_BA1 0xc0
+#define O4_DISPC_VID1_POSITION 0xc4
+#define O4_DISPC_VID1_SIZE 0xc8
+#define O4_DISPC_VID1_ATTRIBUTES 0xcc
+#define O4_DISPC_VID1_ROW_INC 0xd8
+#define O4_DISPC_VID1_PIXEL_INC 0xdc
+#define O4_DISPC_VID1_PICTURE_SIZE 0xe4
+#define O4_DISPC_VID1_PRELOAD 0x230
+#define O4_DISPC_CONTROL2 0x238
+#define O4_DISPC_DEFAULT_COLOR2 0x3ac
+#define O4_DISPC_SIZE_LCD2 0x3cc
+#define O4_DISPC_TIMING_H2 0x400
+#define O4_DISPC_TIMING_V2 0x404
+#define O4_DISPC_POL_FREQ2 0x408
+#define O4_DISPC_DIVISOR2 0x40c
+#define O4_DISPC_DIVISOR 0x804
+
+#define o4_dispc_read(reg) _ofb_read(fbi->dispc, reg)
+#define o4_dispc_write(val, reg) _ofb_write(val, fbi->dispc, reg)
+
+#define DSS_DISPC_VIDn_POSITION_VIDPOSX(_x) ((_x) << 0)
+#define DSS_DISPC_VIDn_POSITION_VIDPOSY(_y) ((_y) << 16)
+
+#define DSS_DISPC_VIDn_PICTURE_SIZE_VIDORGSIZEX(_x) ((_x) << 0)
+#define DSS_DISPC_VIDn_PICTURE_SIZE_VIDORGSIZEY(_y) ((_y) << 16)
+
+#define DSS_DISPC_VIDn_SIZE_VIDSIZEX(_x) ((_x) << 0)
+#define DSS_DISPC_VIDn_SIZE_VIDSIZEY(_y) ((_y) << 16)
+
+#define DSS_DISPC_SIZE_LCD_PPL(_x) ((_x) << 0)
+#define DSS_DISPC_SIZE_LCD_LPP(_y) ((_y) << 16)
+
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDENABLE (1u << 0)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT(_fmt) ((_fmt) << 1)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT_RGB12 \
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT(4u)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT_ARGB16 \
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT(5u)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT_RGB16 \
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT(6u)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT_ARGB16o \
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT(7u)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT_xRGB24u \
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT(8u)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT_RGB24p \
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT(9u)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT_YUV2 \
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT(10u)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT_UYVY \
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT(11u)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT_ARGB32 \
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT(12u)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT_RGBA32 \
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT(13u)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT_xRGB32 \
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT(14u)
+
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDBURSTSIZE(_b) ((_b) << 14)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDBURSTSIZE_2x128 \
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDBURSTSIZE(0u)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDBURSTSIZE_4x128 \
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDBURSTSIZE(1u)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDBURSTSIZE_8x128 \
+ DSS_DISPC_VIDn_ATTRIBUTES_VIDBURSTSIZE(2u)
+
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDCHANNELOUT (1u << 16)
+#define DSS_DISPC_VIDn_ATTRIBUTES_SELFREFRESHAUTO (1u << 17)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDFIFOPRELOAD (1u << 19)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDVERTICALTAPS (1u << 21)
+#define DSS_DISPC_VIDn_ATTRIBUTES_DOUBLESTRIDE (1u << 22)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDARBITRATION (1u << 23)
+#define DSS_DISPC_VIDn_ATTRIBUTES_VIDSELFREFRESH (1u << 24)
+#define DSS_DISPC_VIDn_ATTRIBUTES_ZORDERENABLE (1u << 25)
+
+#define DSS_DISPC_VIDn_ATTRIBUTES_CHANNELOUT2(_b) ((_b) << 30)
+#define DSS_DISPC_VIDn_ATTRIBUTES_CHANNELOUT2_PRIMARY_LCD \
+ DSS_DISPC_VIDn_ATTRIBUTES_CHANNELOUT2(0u)
+#define DSS_DISPC_VIDn_ATTRIBUTES_CHANNELOUT2_SECONDARY_LCD \
+ DSS_DISPC_VIDn_ATTRIBUTES_CHANNELOUT2(1u)
+#define DSS_DISPC_VIDn_ATTRIBUTES_CHANNELOUT2_WRITEBACK_MEM \
+ DSS_DISPC_VIDn_ATTRIBUTES_CHANNELOUT2(3u)
+
+#define DSS_DISPC_CONTROL_LCDENABLE (1u << 0)
+#define DSS_DISPC_CONTROL_TVENABLE (1u << 1)
+#define DSS_DISPC_CONTROL_MONOCOLOR (1u << 2)
+#define DSS_DISPC_CONTROL_STNTFT (1u << 3)
+#define DSS_DISPC_CONTROL_M8B (1u << 4)
+#define DSS_DISPC_CONTROL_GOLCD (1u << 5)
+#define DSS_DISPC_CONTROL_GOTV (1u << 6)
+#define DSS_DISPC_CONTROL_STDITHERENABLE (1u << 7)
+
+#define DSS_DISPC_CONTROL_TFTDATALINES(_l) ((_l) << 8)
+#define DSS_DISPC_CONTROL_TFTDATALINES_12 \
+ DSS_DISPC_CONTROL_TFTDATALINES(0u)
+#define DSS_DISPC_CONTROL_TFTDATALINES_16 \
+ DSS_DISPC_CONTROL_TFTDATALINES(1u)
+#define DSS_DISPC_CONTROL_TFTDATALINES_18 \
+ DSS_DISPC_CONTROL_TFTDATALINES(2u)
+#define DSS_DISPC_CONTROL_TFTDATALINES_24 \
+ DSS_DISPC_CONTROL_TFTDATALINES(3u)
+
+#define DSS_DISPC_CONTROL_STALLMODE (1u << 11)
+#define DSS_DISPC_CONTROL_OVERLAYOPTIMIZATION (1u << 12)
+#define DSS_DISPC_CONTROL_GPIN0 (1u << 13) /* ro */
+#define DSS_DISPC_CONTROL_GPIN1 (1u << 14) /* ro */
+#define DSS_DISPC_CONTROL_GPOUT0 (1u << 15)
+#define DSS_DISPC_CONTROL_GPOUT1 (1u << 16)
+#define DSS_DISPC_CONTROL_HT(_ht) ((_ht) << 17)
+#define DSS_DISPC_CONTROL_TDMENABLE (1u << 20)
+#define DSS_DISPC_CONTROL_TDMPARALLELMODE(_pm) ((_pm) << 21)
+#define DSS_DISPC_CONTROL_TDMCYCLEFORMAT(_cf) ((_cf) << 23)
+#define DSS_DISPC_CONTROL_TDMUNUSEDBITS(_ub) ((_ub) << 25)
+#define DSS_DISPC_CONTROL_PCKFREEENABLE (1u << 27)
+#define DSS_DISPC_CONTROL_LCDENABLESIGNAL (1u << 28)
+#define DSS_DISPC_CONTROL_LCDENABLEPOL (1u << 29)
+#define DSS_DISPC_CONTROL_SPATIALTEMPD(_df) ((_df) << 30)
+
+#define DSS_DISPC_POL_FREQ_IVS (1u << 12)
+#define DSS_DISPC_POL_FREQ_IHS (1u << 13)
+#define DSS_DISPC_POL_FREQ_IPC (1u << 14)
+#define DSS_DISPC_POL_FREQ_IEO (1u << 15)
+#define DSS_DISPC_POL_FREQ_RF (1u << 16)
+#define DSS_DISPC_POL_FREQ_ONOFF (1u << 17)
+
+#define DSS_DISPC_TIMING_H_HSW(_hsw) ((_hsw) << 0)
+#define DSS_DISPC_TIMING_H_HFP(_hfp) ((_hfp) << 8)
+#define DSS_DISPC_TIMING_H_HBP(_hbp) ((_hbp) << 20)
+
+#define DSS_DISPC_TIMING_V_VSW(_vsw) ((_vsw) << 0)
+#define DSS_DISPC_TIMING_V_VFP(_vfp) ((_vfp) << 8)
+#define DSS_DISPC_TIMING_V_VBP(_vbp) ((_vbp) << 20)
+
+#define DSS_DISPC_DIVISOR_ENABLE (1u << 0)
+#define DSS_DISPC_DIVISOR_LCD(_lcd) ((_lcd) << 16)
+
+#define DSS_DISPC_DIVISOR2_PCD(_pcd) ((_pcd) << 0)
+#define DSS_DISPC_DIVISOR2_LCD(_lcd) ((_lcd) << 16)
+
+#define DSS_DISPC_IRQSTATUS_FRAMEDONE (1u << 0)
+#define DSS_DISPC_IRQSTATUS_FRAMEDONE2 (1u << 22)
+
+#define DSS_DSS_SYSSTATUS_RESETDONE (1u << 0)
+
+#endif /* H_BAREBOX_DRIVER_VIDEO_O4_REGS_H */
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 2/2] ARM omap-fb: add board helper code
2013-06-19 9:33 [PATCH 1/2] omap-fb: add driver Christoph Fritz
@ 2013-06-19 9:39 ` Christoph Fritz
2013-06-24 13:32 ` [PATCH 1/2] omap-fb: add driver Christoph Fritz
1 sibling, 0 replies; 4+ messages in thread
From: Christoph Fritz @ 2013-06-19 9:39 UTC (permalink / raw)
To: Sascha Hauer; +Cc: Tomi Valkeinen, barebox
This patch adds OMAP machine dependent framebuffer code so that
board files can make use of driver omap-fb.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
---
arch/arm/mach-omap/Makefile | 2 +-
arch/arm/mach-omap/include/mach/omap-fb.h | 47 +++++++++++++++++++++++++++++
arch/arm/mach-omap/omap_fb.c | 34 +++++++++++++++++++++
3 files changed, 82 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-omap/include/mach/omap-fb.h
create mode 100644 arch/arm/mach-omap/omap_fb.c
diff --git a/arch/arm/mach-omap/Makefile b/arch/arm/mach-omap/Makefile
index 94e42c6..bc5daab 100644
--- a/arch/arm/mach-omap/Makefile
+++ b/arch/arm/mach-omap/Makefile
@@ -15,7 +15,7 @@
# GNU General Public License for more details.
#
#
-obj-$(CONFIG_ARCH_OMAP) += syslib.o omap_devices.o
+obj-$(CONFIG_ARCH_OMAP) += syslib.o omap_devices.o omap_fb.o
pbl-$(CONFIG_ARCH_OMAP) += syslib.o
obj-$(CONFIG_OMAP_CLOCK_SOURCE_S32K) += s32k_clksource.o
obj-$(CONFIG_OMAP_CLOCK_SOURCE_DMTIMER0) += dmtimer0.o
diff --git a/arch/arm/mach-omap/include/mach/omap-fb.h b/arch/arm/mach-omap/include/mach/omap-fb.h
new file mode 100644
index 0000000..f68dc1a
--- /dev/null
+++ b/arch/arm/mach-omap/include/mach/omap-fb.h
@@ -0,0 +1,47 @@
+#ifndef H_BAREBOX_ARCH_ARM_MACH_OMAP_MACH_FB4_H
+#define H_BAREBOX_ARCH_ARM_MACH_OMAP_MACH_FB4_H
+
+#include <fb.h>
+
+#define OMAP_DSS_LCD_TFT (1u << 0)
+#define OMAP_DSS_LCD_IVS (1u << 1)
+#define OMAP_DSS_LCD_IHS (1u << 2)
+#define OMAP_DSS_LCD_IPC (1u << 3)
+#define OMAP_DSS_LCD_IEO (1u << 4)
+#define OMAP_DSS_LCD_RF (1u << 5)
+#define OMAP_DSS_LCD_ONOFF (1u << 6)
+
+#define OMAP_DSS_LCD_DATALINES(_l) ((_l) << 10)
+#define OMAP_DSS_LCD_DATALINES_msk OMAP_DSS_LCD_DATALINES(3u)
+#define OMAP_DSS_LCD_DATALINES_12 OMAP_DSS_LCD_DATALINES(0u)
+#define OMAP_DSS_LCD_DATALINES_16 OMAP_DSS_LCD_DATALINES(1u)
+#define OMAP_DSS_LCD_DATALINES_18 OMAP_DSS_LCD_DATALINES(2u)
+#define OMAP_DSS_LCD_DATALINES_24 OMAP_DSS_LCD_DATALINES(3u)
+
+struct omapfb_display {
+ struct fb_videomode mode;
+
+ unsigned long config;
+
+ unsigned int power_on_delay;
+ unsigned int power_off_delay;
+};
+
+struct omapfb_platform_data {
+ struct omapfb_display const *displays;
+ size_t num_displays;
+
+ unsigned int dss_clk_hz;
+
+ unsigned int bpp;
+
+ struct resource const *screen;
+
+ void (*enable)(int p);
+};
+
+struct device_d;
+struct device_d *omap_add_display(struct omapfb_platform_data *o_pdata);
+
+
+#endif /* H_BAREBOX_ARCH_ARM_MACH_OMAP_MACH_FB4_H */
diff --git a/arch/arm/mach-omap/omap_fb.c b/arch/arm/mach-omap/omap_fb.c
new file mode 100644
index 0000000..ae318d8
--- /dev/null
+++ b/arch/arm/mach-omap/omap_fb.c
@@ -0,0 +1,34 @@
+#include <driver.h>
+#include <common.h>
+#include <linux/ioport.h>
+#include <mach/omap-fb.h>
+
+#if defined(CONFIG_DRIVER_VIDEO_OMAP)
+static struct resource omapfb_resources[] = {
+ {
+ .name = "omap4_dss",
+ .start = 0x48040000,
+ .end = 0x48040000 + 512 - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+ }, {
+ .name = "omap4_dispc",
+ .start = 0x48041000,
+ .end = 0x48041000 + 3072 - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+ },
+};
+
+struct device_d *omap_add_display(struct omapfb_platform_data *o_pdata)
+{
+ return add_generic_device_res("omap_fb", -1,
+ omapfb_resources,
+ ARRAY_SIZE(omapfb_resources),
+ o_pdata);
+}
+#else
+struct device_d *omap_add_display(struct omapfb_platform_data *o_pdata)
+{
+ return NULL;
+}
+#endif
+EXPORT_SYMBOL(omap_add_display);
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 1/2] omap-fb: add driver
2013-06-19 9:33 [PATCH 1/2] omap-fb: add driver Christoph Fritz
2013-06-19 9:39 ` [PATCH 2/2] ARM omap-fb: add board helper code Christoph Fritz
@ 2013-06-24 13:32 ` Christoph Fritz
2013-06-24 19:50 ` Sascha Hauer
1 sibling, 1 reply; 4+ messages in thread
From: Christoph Fritz @ 2013-06-24 13:32 UTC (permalink / raw)
To: Sascha Hauer; +Cc: Tomi Valkeinen, barebox
On Wed, 2013-06-19 at 11:33 +0200, Christoph Fritz wrote:
> This patch adds omap display controller support. Currently only
> OMAP4 DSS is supported.
Any objections here?
These are the changes in the review-process so far:
changes since v2:
- use dev_request_mem_region_by_name()
changes since v3:
- remove register struct
- use uncached screen_base
changes since v4:
- remove useless dev_add_param()
- use wait_on_timeout() instead while-deadlock
changes since v5:
- use dev_dbg() and dev_err(), be less verbose
- fix coding-style issues
- add omap4fb_find_display_by_name()
- add additional read/write macros
changes since v6:
- split driver into two commits
- rename driver to "omap-fb"
Thanks
-- Christoph
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 1/2] omap-fb: add driver
2013-06-24 13:32 ` [PATCH 1/2] omap-fb: add driver Christoph Fritz
@ 2013-06-24 19:50 ` Sascha Hauer
0 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2013-06-24 19:50 UTC (permalink / raw)
To: Christoph Fritz; +Cc: Tomi Valkeinen, barebox
On Mon, Jun 24, 2013 at 03:32:30PM +0200, Christoph Fritz wrote:
> On Wed, 2013-06-19 at 11:33 +0200, Christoph Fritz wrote:
> > This patch adds omap display controller support. Currently only
> > OMAP4 DSS is supported.
>
> Any objections here?
Oh, sorry, I missed this last version. Applied now
Thanks
Sascha
>
> These are the changes in the review-process so far:
>
> changes since v2:
> - use dev_request_mem_region_by_name()
> changes since v3:
> - remove register struct
> - use uncached screen_base
> changes since v4:
> - remove useless dev_add_param()
> - use wait_on_timeout() instead while-deadlock
> changes since v5:
> - use dev_dbg() and dev_err(), be less verbose
> - fix coding-style issues
> - add omap4fb_find_display_by_name()
> - add additional read/write macros
> changes since v6:
> - split driver into two commits
> - rename driver to "omap-fb"
>
> Thanks
> -- Christoph
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-06-24 19:51 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-06-19 9:33 [PATCH 1/2] omap-fb: add driver Christoph Fritz
2013-06-19 9:39 ` [PATCH 2/2] ARM omap-fb: add board helper code Christoph Fritz
2013-06-24 13:32 ` [PATCH 1/2] omap-fb: add driver Christoph Fritz
2013-06-24 19:50 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox