From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: v2013.07.0 and v2013.06.1
Date: Tue, 2 Jul 2013 16:06:46 +0200 [thread overview]
Message-ID: <20130702140646.GF516@pengutronix.de> (raw)
Hi All,
We have a new monthly release and a new stable release.
A lot has happened since the last release, most notably beginning
Marvell support. Thanks Thomas and Sebastian and of course all other
people working on barebox.
Sascha
----------------------------------------------------------------
Alexander Shiyan (7):
GPIO: Add gpio_to_desc helper
ARM: OMAP MCI: Move TWL6030 power initialization into OMAP directory
MCI: Sort Makefile entries
ARM: PCM970: Add definition for SPI CS1
ARM: pcm038: Add support for USB OTG device
ARM: Using unsigned specifiers for unsigned arguments for printf
ARM: pcm038: Fix partition size definitions
Antony Pavlov (19):
MIPS: xburst: use common serial code
MIPS: rzx50: switch to common mach-xburst serial code
ppc: boards: add barebox.lds to .gitignore
of: separate out "generic" memory bank adding
MIPS: add initial device tree support
MIPS: qemu-malta: add device tree support
MIPS: qemu-malta_defconfig: enable OF support
MIPS: rzx50: add trivial board_pbl_start
MIPS: XBurst: enable pbl support
MIPS: rzx50: enable pbl in defconfig
MIPS: asm/mipsregs.h: remove unused stuff
MIPS: XBurst: use mach-specific debug_ll setup
MIPS: pbl: add low-level debug asm macros for ns16550
MIPS: rzx50: prepare for new debug_ll
MIPS: malta: prepare for new debug_ll
MIPS: unify ns16550 debug_ll support code
MIPS: rzx50: pbl: use debug_ll
MIPS: rzx50_defconfig: use UART1 for low-level debug
clk: fix warning: no previous prototype for 'clk_is_enabled'
Brian Lilly (1):
ARM: cfa10036: Add more board ID for boot time detection
Gregory Hermant (1):
at91: add Calao QIL-A9G20
Jan Luebbe (2):
arm: am33xx: add pinmux and clock config for UART2
arm: am33xx: add pinmux config for RMII2
Jan Weitzel (6):
pcm049: clean up
twl6030: Set WR_S for VMMC
OMAP4: Use default clock source for mcbsp
OMAP4: fix omap4_bootsource regression
ubiformat: check file size
nand_base: fix chipsize for multi LUN nands
Juergen Beisert (1):
MXS/i.MX23: add boot source detection
Lucas Stach (4):
tegra20: add pinctrl driver
tegra: paz00: import pinconfig from Linux
tegra20: add generic board and Colibri T20 on Iris
Revert "usb: chipidea-imx: Fix usb initialization"
Markus Niebel (3):
ARM: i.MX53: tqma53: fix board name in Kconfig
ARM: i.MX53: tqma53: move RAM setting to submenu
ARM: i.MX53: tqma53: update flash_header
Masaki Muranaka (2):
Enables to build bootm command on generic_x86.
Remove a redundant line.
Oleksij Rempel (5):
cfi_flash: add shift option for some cfi memory chips
cfi_flash: size_ratio should not be 0
MIPS: add Atheros ar531x family support
net: add ar231x-eth support
MIPS: ar231x: add netgear-wg102
Philipp Zabel (1):
ARM i.MX6: Fix bootsource detection
Renaud Barbier (2):
ppc io.h: fix indentation
ppc: update I/O accessors
Sascha Hauer (103):
ARM: dtb: Add $(obj)/$(BUILTIN_DTB).dtb.S as secondary target
ARM: build dtbs during build process using extra-y
scripts: fixdep: update from v3.10-rc1
kbuild: always run gcc -E on *.dts, remove cmd_dtc_cpp
of: When checking for existing devices also check resource end
of: Call of_add_memory from of_probe
of: Add of_match_node function
of: populate devices based on "simple-bus" property
i2c: Add missing result check
i2c: remove dead code
i2c: Add support for dynamic i2c bus numbers
pinctrl: imx-iomux-v3: only register pinctrl when device node is available
spi: improve devicetree support
mtd: dataflash: Add devicetree probing support
net: Add of_register_ethaddr
net: fec: Add imx25 compatible property
treewide: Fix typo seperate -> separate
Merge branch 'for-next/of' into for-next/imx-oftree
Merge branch 'for-next/of-misc' into for-next/imx-oftree
ARM: i.MX: remove unused .mac_addr_base in iim
ARM: i.MX: iim: Add devicetree probe support
ARM: i.MX51: Add devicetree files
ARM: i.MX51: Add IIM devicetree node
ARM: i.MX51: Fixup fec pads in dts
of: provide NULL of_get_root_node for \!CONFIG_OFTREE
ARM: i.MX51: skip devices register when devicetree is present
ARM: i.MX51 babbage: Add spi-cs-high property to pmic
ARM: i.MX51 babbage: provide MAC adress in devicetree
ARM: i.MX51 babbage: Add phy reset gpio to dts
ARM: i.MX51 babbage: switch to devicetree
param: Add info function
param: Add helpers to provide an enum parameter
ARM: Makefile: Make sure to clean boarddirs
ARM: i.MX51: Add aliases for MMC controllers
net: fec_imx: default phy address to -1 for dt probe
cfi: remove unused field from struct flash_info
cfi: Add dev * to flash_info and switch to dev_*
cfi: make hardware device parent of mtd device
mtd: call mtd_erase with complete area if possible
mci: imx-esdhc: factor out common sdhci registers
mci i.MX esdhc: Fix clock divider calculation
mci: Add support for MMC boot partitions
driver: Attach info callback to device, not to driver
mci: make mci device a pure device
mci: embed mci device into struct mci
mci: set name of mci device to same name as the filename
of: Add of_alias_get function
mci: imx-esdhc: allow to specify devicename via OF alias
ARM: i.MX51: PLL errata workaround
usb: Add devicetree helpers
of: do not scan aliases when no root node present
scripts: Add imx-usb-loader tool
ARM: i.MX51 babbage: switch to imx-image
of: Also print disabled nodes
of: remove unused define
bootm: make sure to print fixed oftree
bootm: print Kernel commandline in verbose mode
treewide include/: Add missing includes
mtd: m25p80: add devicetree support
ARM: i.MX6: Fix CCM compatible node
ARM: i.MX6: skip devices register when devicetree is present
ARM: i.MX6: Add devicetree files
ARM: i.MX6: add imx31 compatible entry for GPT
ARM: i.MX6: Add usdhc aliases
ARM: i.MX6 sabrelite: switch to devicetree probing
ARM: i.MX6 sabresd: Switch to devicetree probing
block: remove unused read_start and read_done ops
block: rename file operation functions
block: implement block_read/block_write functions
devices: add detect mechanism
mci: implement detect driver callback
mci fsl-esdhc: implement detect driver callback
of: Add of_modalias_node function
i2c: Add devicetree support
i2c: fsl: Add devicetree probe support
usb: i.MX chipidea: Add devicetree support
usb: i.MX chipidea: Add overcurrent disable flag for i.MX6
bootm: Print internal devicetree information without verbose
mci: Add devicetree helper function
mci: i.MX esdhc: get additional parameters from devicetree
Merge branch 'for-next/misc'
Merge branch 'for-next/arm'
Merge branch 'for-next/at91'
partitions: Add missing depends on BLOCK
partition: DOS: Add parameter for the NT disk Signature
Merge branch 'for-next/block'
Merge branch 'for-next/cfi'
Merge branch 'for-next/imx'
Merge branch 'for-next/imx-oftree'
Merge branch 'for-next/marvell'
Merge branch 'for-next/mci'
Merge branch 'for-next/mips'
Merge branch 'for-next/mxs'
Merge branch 'for-next/of'
Merge branch 'for-next/of-i2c'
Merge branch 'for-next/omap'
Merge branch 'for-next/ppc'
Merge branch 'for-next/tegra'
Merge branch 'for-next/usb-chipidea'
usb: ulpi: Try more often to detect a phy
partitions: dos: fix memory leak in nt disk signature
ARM: Marvell boards: Fix out of tree compilation
Release v2013.07.0
Sebastian Hesselbarth (9):
gitignore: add kwb binary images to gitignore file
scripts: kwbimage: add references to Marvell Dove SoC
scripts: kwboot: add support for Marvell Dove
arm: initial support for Marvell Dove SoCs
arm: add basic support for SolidRun CuBox
arm: mach-mvebu: rename Armada 370/XP core code
arm: mvebu: add more visible SoC separators to Kconfig
arm: mvebu: introduce common lowlevel and early init
clocksource: fix Marvell timer read-back value
Teresa Gámez (1):
pcm049: add 1GB RAM support
Thomas Petazzoni (17):
scripts: new kwbimage manipulation tool for Marvell SoC boot images
scripts: add kwboot tool
arm: initial support for Marvell Armada 370/XP SoCs
arm: integrate kwbimage in the image generation
arm: add basic support for Armada XP OpenBlocks AX3 platform
arm: add basic support for the Armada 370 Mirabox platform
arm: add basic support for the Armada XP GP platform
scripts/kwbimage: add a new function image_count_options()
scripts/kwbimage: add a few sanity checks
scripts/kwbimage: make the v0 image creation more flexible
scripts/kwbimage: simplify the v1 image creation
scripts/kwbimage: make image_boot_mode_id() return -1 on failure
scripts/kwbimage: add support for NAND ECC and page size header fields
arm: mvebu: add Feroceon CPU type
arm: mvebu: initial support for Marvell Kirkwood SoCs
arm: mvebu: add basic support for Globalscale Guruplug board
arm: mvebu: remove useless lines in kwbimage.cfg for CuBox
wilhelm (1):
Added sd driver for bcm2835 (Raspberry PI)
.gitignore | 2 +
Documentation/devicetree/bindings/README | 6 +
.../devicetree/bindings/misc/fsl,imx-iim.txt | 20 +
Makefile | 4 +-
arch/arm/Kconfig | 7 +
arch/arm/Makefile | 234 +--
arch/arm/boards/crystalfontz-cfa10036/hwdetect.c | 16 +
arch/arm/boards/freescale-mx51-pdk/Makefile | 4 +-
arch/arm/boards/freescale-mx51-pdk/board.c | 106 +-
arch/arm/boards/freescale-mx51-pdk/dcd-data.h | 60 -
.../boards/freescale-mx51-pdk/flash-header.imxcfg | 59 +
arch/arm/boards/freescale-mx51-pdk/flash_header.c | 29 -
arch/arm/boards/freescale-mx6-sabrelite/board.c | 156 +-
arch/arm/boards/freescale-mx6-sabresd/board.c | 143 +-
arch/arm/boards/globalscale-guruplug/Makefile | 1 +
arch/arm/boards/globalscale-guruplug/board.c | 17 +
arch/arm/boards/globalscale-guruplug/config.h | 4 +
arch/arm/boards/globalscale-guruplug/kwbimage.cfg | 27 +
arch/arm/boards/globalscale-mirabox/Makefile | 1 +
arch/arm/boards/globalscale-mirabox/board.c | 17 +
arch/arm/boards/globalscale-mirabox/config.h | 4 +
arch/arm/boards/globalscale-mirabox/kwbimage.cfg | 5 +
arch/arm/boards/marvell-armada-xp-gp/Makefile | 1 +
arch/arm/boards/marvell-armada-xp-gp/board.c | 17 +
arch/arm/boards/marvell-armada-xp-gp/config.h | 4 +
arch/arm/boards/marvell-armada-xp-gp/kwbimage.cfg | 3 +
arch/arm/boards/pcm038/pcm038.c | 48 +-
arch/arm/boards/pcm049/board.c | 4 +
arch/arm/boards/pcm049/lowlevel.c | 31 +-
arch/arm/boards/plathome-openblocks-ax3/Makefile | 1 +
arch/arm/boards/plathome-openblocks-ax3/board.c | 17 +
arch/arm/boards/plathome-openblocks-ax3/config.h | 4 +
.../boards/plathome-openblocks-ax3/kwbimage.cfg | 3 +
arch/arm/boards/{qil-a9260 => qil-a926x}/Makefile | 0
arch/arm/boards/{qil-a9260 => qil-a926x}/config.h | 0
.../{qil-a9260 => qil-a926x}/env/bin/init_board | 0
.../arm/boards/{qil-a9260 => qil-a926x}/env/config | 3 +-
arch/arm/boards/{qil-a9260 => qil-a926x}/init.c | 35 +-
.../boards/{qil-a9260 => qil-a926x}/qil-a9260.dox | 0
arch/arm/boards/solidrun-cubox/Makefile | 1 +
arch/arm/boards/solidrun-cubox/board.c | 17 +
arch/arm/boards/solidrun-cubox/config.h | 4 +
arch/arm/boards/solidrun-cubox/kwbimage.cfg | 37 +
arch/arm/boards/tqma53/flash_header.c | 9 +-
arch/arm/configs/freescale-mx6-sabrelite_defconfig | 28 +-
arch/arm/configs/freescale_mx51_babbage_defconfig | 16 +-
arch/arm/configs/globalscale_guruplug_defconfig | 6 +
arch/arm/configs/globalscale_mirabox_defconfig | 8 +
arch/arm/configs/marvell_armada_xp_gp_defconfig | 10 +
arch/arm/configs/plathome_openblocks_ax3_defconfig | 9 +
arch/arm/configs/qil_a9260_128mib_defconfig | 14 +-
arch/arm/configs/qil_a9260_defconfig | 14 +-
arch/arm/configs/qil_a9g20_128mib_defconfig | 77 +
arch/arm/configs/qil_a9g20_defconfig | 76 +
arch/arm/configs/solidrun_cubox_defconfig | 9 +
arch/arm/configs/tegra20_colibri_iris_defconfig | 24 +
arch/arm/cpu/Kconfig | 8 +
arch/arm/cpu/cpuinfo.c | 2 +-
arch/arm/dts/Makefile | 11 +-
arch/arm/dts/imx51-babbage.dts | 307 ++++
arch/arm/dts/imx51-pinfunc.h | 773 ++++++++++
arch/arm/dts/imx51.dtsi | 723 ++++++++++
arch/arm/dts/imx6q-pinfunc.h | 1041 ++++++++++++++
arch/arm/dts/imx6q-sabrelite.dts | 174 +++
arch/arm/dts/imx6q-sabresd.dts | 43 +
arch/arm/dts/imx6q.dtsi | 358 +++++
arch/arm/dts/imx6qdl-sabresd.dtsi | 87 ++
arch/arm/dts/imx6qdl.dtsi | 840 +++++++++++
arch/arm/dts/tegra20-colibri-iris.dts | 32 +
arch/arm/dts/tegra20-colibri.dtsi | 190 +++
arch/arm/dts/tegra20-paz00.dts | 216 +++
arch/arm/dts/tegra20.dtsi | 8 +
arch/arm/lib/bootm.c | 6 +-
arch/arm/lib/module.c | 6 +-
arch/arm/mach-at91/Kconfig | 12 +-
arch/arm/mach-bcm2835/core.c | 1 +
arch/arm/mach-imx/Kconfig | 45 +-
arch/arm/mach-imx/boot.c | 26 +-
arch/arm/mach-imx/clk-imx6.c | 2 +-
arch/arm/mach-imx/iim.c | 64 +-
arch/arm/mach-imx/imx25.c | 6 +-
arch/arm/mach-imx/imx51.c | 58 +-
arch/arm/mach-imx/imx6.c | 3 +
arch/arm/mach-imx/include/mach/devices-imx1.h | 1 +
arch/arm/mach-imx/include/mach/devices-imx21.h | 1 +
arch/arm/mach-imx/include/mach/devices-imx25.h | 1 +
arch/arm/mach-imx/include/mach/devices-imx27.h | 1 +
arch/arm/mach-imx/include/mach/devices-imx35.h | 1 +
arch/arm/mach-imx/include/mach/devices-imx51.h | 3 +-
arch/arm/mach-imx/include/mach/devices-imx53.h | 1 +
arch/arm/mach-imx/include/mach/devices-imx6.h | 1 +
arch/arm/mach-imx/include/mach/generic.h | 3 +
arch/arm/mach-imx/include/mach/iim.h | 4 -
arch/arm/mach-imx/include/mach/imx5.h | 1 +
arch/arm/mach-imx/include/mach/iomux-v1.h | 2 +
arch/arm/mach-imx/include/mach/weim.h | 2 +
arch/arm/mach-mvebu/Kconfig | 124 ++
arch/arm/mach-mvebu/Makefile | 6 +
arch/arm/mach-mvebu/armada-370-xp.c | 121 ++
arch/arm/mach-mvebu/common.c | 57 +
arch/arm/mach-mvebu/dove.c | 145 ++
.../mach-mvebu/include/mach/armada-370-xp-regs.h | 47 +
arch/arm/mach-mvebu/include/mach/common.h | 23 +
arch/arm/mach-mvebu/include/mach/debug_ll.h | 43 +
arch/arm/mach-mvebu/include/mach/dove-regs.h | 62 +
arch/arm/mach-mvebu/include/mach/dove.h | 23 +
arch/arm/mach-mvebu/include/mach/kirkwood-regs.h | 50 +
arch/arm/mach-mvebu/include/mach/kirkwood.h | 22 +
arch/arm/mach-mvebu/include/mach/lowlevel.h | 23 +
arch/arm/mach-mvebu/include/mach/mvebu.h | 22 +
arch/arm/mach-mvebu/kirkwood.c | 107 ++
arch/arm/mach-mvebu/lowlevel.c | 28 +
arch/arm/mach-mxs/imx.c | 44 +-
arch/arm/mach-omap/Kconfig | 12 +
arch/arm/mach-omap/am33xx_clock.c | 8 +
arch/arm/mach-omap/am33xx_mux.c | 35 +
arch/arm/mach-omap/include/mach/am33xx-clock.h | 3 +
arch/arm/mach-omap/include/mach/am33xx-mux.h | 3 +
arch/arm/mach-omap/omap4_clock.c | 6 +-
arch/arm/mach-omap/omap4_generic.c | 4 +-
arch/arm/mach-omap/omap4_twl6030_mmc.c | 19 +-
arch/arm/mach-tegra/Kconfig | 13 +
arch/mips/Kconfig | 19 +
arch/mips/Makefile | 15 +
arch/mips/boards/netgear-wg102/Kconfig | 6 +
arch/mips/boards/netgear-wg102/Makefile | 1 +
arch/mips/boards/netgear-wg102/ram.c | 11 +
arch/mips/boards/qemu-malta/init.c | 11 -
.../boards/rzx50/include/board/board_pbl_start.h | 40 +
arch/mips/boards/rzx50/include/board/debug_ll.h | 5 +-
arch/mips/boards/rzx50/serial.c | 37 +-
arch/mips/boot/Makefile | 2 +
arch/mips/boot/dtb.c | 61 +
arch/mips/configs/qemu-malta_defconfig | 17 +-
arch/mips/configs/rzx50_defconfig | 4 +
arch/mips/dts/Makefile | 10 +
arch/mips/dts/qemu-malta.dts | 12 +
arch/mips/dts/skeleton.dtsi | 13 +
arch/mips/include/asm/debug_ll_ns16550.h | 115 ++
arch/mips/include/asm/mipsregs.h | 8 -
arch/mips/include/debug_ll_ns16550.h | 37 -
arch/mips/lib/barebox.lds.S | 2 +
arch/mips/mach-ar231x/Kconfig | 17 +
arch/mips/mach-ar231x/Makefile | 3 +
arch/mips/mach-ar231x/ar231x.c | 195 +++
arch/mips/mach-ar231x/ar231x_reset.c | 73 +
arch/mips/mach-ar231x/board.c | 188 +++
arch/mips/mach-ar231x/include/mach/ar2312_regs.h | 302 ++++
.../mach-ar231x/include/mach/ar231x_platform.h | 104 ++
arch/mips/mach-malta/include/mach/debug_ll.h | 2 +-
arch/mips/mach-malta/include/mach/hardware.h | 1 +
arch/mips/mach-xburst/Kconfig | 18 +
arch/mips/mach-xburst/Makefile | 1 +
arch/mips/mach-xburst/include/mach/debug_ll.h | 2 +-
.../mach-xburst/include/mach/debug_ll_jz4750d.h | 41 +
arch/mips/mach-xburst/include/mach/devices.h | 8 +
arch/mips/mach-xburst/include/mach/jz4750d_regs.h | 2 +
arch/mips/mach-xburst/serial.c | 60 +
arch/ppc/boards/.gitignore | 1 +
arch/ppc/include/asm/io.h | 71 +-
arch/sandbox/board/hostfile.c | 5 +-
commands/Kconfig | 9 +
commands/Makefile | 1 +
commands/bootm.c | 6 +-
commands/detect.c | 77 +
commands/echo.c | 1 -
commands/ubiformat.c | 5 +
common/block.c | 38 +-
common/globalvar.c | 4 +-
common/hush.c | 2 +-
common/oftree.c | 21 +-
common/partitions.c | 2 +-
common/partitions/Kconfig | 1 +
common/partitions/dos.c | 90 ++
common/partitions/efi.c | 4 +-
drivers/ata/ahci.c | 2 +-
drivers/ata/sata-imx.c | 2 +-
drivers/base/driver.c | 33 +-
drivers/clk/clk.c | 2 +-
drivers/clocksource/Kconfig | 8 +
drivers/clocksource/Makefile | 2 +
drivers/clocksource/mvebu.c | 90 ++
drivers/clocksource/orion.c | 76 +
drivers/gpio/gpiolib.c | 95 +-
drivers/i2c/busses/i2c-imx.c | 10 +
drivers/i2c/i2c.c | 73 +-
drivers/mci/Kconfig | 7 +
drivers/mci/Makefile | 20 +-
drivers/mci/atmel_mci.c | 8 +-
drivers/mci/imx-esdhc.c | 251 ++--
drivers/mci/imx-esdhc.h | 89 --
drivers/mci/imx.c | 2 +-
drivers/mci/mci-bcm2835.c | 591 ++++++++
drivers/mci/mci-bcm2835.h | 73 +
drivers/mci/mci-core.c | 465 ++++--
drivers/mci/mxs.c | 14 +-
drivers/mci/s3c.c | 8 +-
drivers/mci/sdhci.h | 89 ++
drivers/mci/twl6030.c | 29 -
drivers/misc/jtag.c | 40 +-
drivers/mtd/core.c | 6 +
drivers/mtd/devices/m25p80.c | 9 +
drivers/mtd/devices/mtd_dataflash.c | 11 +
drivers/mtd/nand/nand_base.c | 3 +-
drivers/mtd/nor/cfi_flash.c | 81 +-
drivers/mtd/nor/cfi_flash.h | 6 +-
drivers/net/Kconfig | 7 +
drivers/net/Makefile | 1 +
drivers/net/ar231x.c | 437 ++++++
drivers/net/ar231x.h | 219 +++
drivers/net/cs8900.c | 3 +-
drivers/net/fec_imx.c | 4 +
drivers/of/Kconfig | 5 +
drivers/of/Makefile | 1 +
drivers/of/base.c | 147 +-
drivers/of/mem_generic.c | 15 +
drivers/pinctrl/Kconfig | 6 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/imx-iomux-v3.c | 2 +-
drivers/pinctrl/pinctrl-tegra20.c | 346 +++++
drivers/spi/spi.c | 15 +-
drivers/usb/core/Makefile | 1 +
drivers/usb/core/of.c | 91 ++
drivers/usb/imx/chipidea-imx.c | 138 +-
drivers/usb/imx/imx-usb-misc.c | 59 +-
drivers/usb/imx/imx-usb-phy.c | 11 +-
drivers/usb/otg/ulpi.c | 38 +-
drivers/video/fb.c | 3 +-
drivers/video/s3c24xx.c | 8 +-
drivers/video/stm.c | 3 +-
include/block.h | 10 +-
include/driver.h | 15 +-
include/environment.h | 2 +
include/fb.h | 1 +
include/filetype.h | 2 +
include/globalvar.h | 4 +-
include/i2c/i2c.h | 4 +
include/image.h | 2 +-
include/linux/phy.h | 1 +
include/mci.h | 36 +-
include/mci/twl6030.h | 10 -
include/mfd/mc13xxx.h | 2 +
include/net.h | 7 +
include/notifier.h | 2 +
include/of.h | 21 +-
include/param.h | 15 +
include/partition.h | 3 +-
include/spi/spi.h | 1 +
include/usb/chipidea-imx.h | 2 +
include/usb/usb.h | 21 +
lib/parameter.c | 104 ++
net/eth.c | 68 +-
scripts/.gitignore | 2 +
scripts/Makefile | 2 +
scripts/Makefile.lib | 46 +-
scripts/basic/fixdep.c | 206 ++-
scripts/imx/.gitignore | 2 +
scripts/imx/Makefile | 10 +
scripts/imx/README | 89 ++
scripts/imx/imx-image.c | 744 ++++++++++
scripts/imx/imx-usb-loader.c | 1427 +++++++++++++++++++
scripts/kwbimage.c | 1496 ++++++++++++++++++++
scripts/kwboot.c | 730 ++++++++++
263 files changed, 16605 insertions(+), 1585 deletions(-)
create mode 100644 Documentation/devicetree/bindings/README
create mode 100644 Documentation/devicetree/bindings/misc/fsl,imx-iim.txt
delete mode 100644 arch/arm/boards/freescale-mx51-pdk/dcd-data.h
create mode 100644 arch/arm/boards/freescale-mx51-pdk/flash-header.imxcfg
delete mode 100644 arch/arm/boards/freescale-mx51-pdk/flash_header.c
create mode 100644 arch/arm/boards/globalscale-guruplug/Makefile
create mode 100644 arch/arm/boards/globalscale-guruplug/board.c
create mode 100644 arch/arm/boards/globalscale-guruplug/config.h
create mode 100644 arch/arm/boards/globalscale-guruplug/kwbimage.cfg
create mode 100644 arch/arm/boards/globalscale-mirabox/Makefile
create mode 100644 arch/arm/boards/globalscale-mirabox/board.c
create mode 100644 arch/arm/boards/globalscale-mirabox/config.h
create mode 100644 arch/arm/boards/globalscale-mirabox/kwbimage.cfg
create mode 100644 arch/arm/boards/marvell-armada-xp-gp/Makefile
create mode 100644 arch/arm/boards/marvell-armada-xp-gp/board.c
create mode 100644 arch/arm/boards/marvell-armada-xp-gp/config.h
create mode 100644 arch/arm/boards/marvell-armada-xp-gp/kwbimage.cfg
create mode 100644 arch/arm/boards/plathome-openblocks-ax3/Makefile
create mode 100644 arch/arm/boards/plathome-openblocks-ax3/board.c
create mode 100644 arch/arm/boards/plathome-openblocks-ax3/config.h
create mode 100644 arch/arm/boards/plathome-openblocks-ax3/kwbimage.cfg
rename arch/arm/boards/{qil-a9260 => qil-a926x}/Makefile (100%)
rename arch/arm/boards/{qil-a9260 => qil-a926x}/config.h (100%)
rename arch/arm/boards/{qil-a9260 => qil-a926x}/env/bin/init_board (100%)
rename arch/arm/boards/{qil-a9260 => qil-a926x}/env/config (85%)
rename arch/arm/boards/{qil-a9260 => qil-a926x}/init.c (85%)
rename arch/arm/boards/{qil-a9260 => qil-a926x}/qil-a9260.dox (100%)
create mode 100644 arch/arm/boards/solidrun-cubox/Makefile
create mode 100644 arch/arm/boards/solidrun-cubox/board.c
create mode 100644 arch/arm/boards/solidrun-cubox/config.h
create mode 100644 arch/arm/boards/solidrun-cubox/kwbimage.cfg
create mode 100644 arch/arm/configs/globalscale_guruplug_defconfig
create mode 100644 arch/arm/configs/globalscale_mirabox_defconfig
create mode 100644 arch/arm/configs/marvell_armada_xp_gp_defconfig
create mode 100644 arch/arm/configs/plathome_openblocks_ax3_defconfig
create mode 100644 arch/arm/configs/qil_a9g20_128mib_defconfig
create mode 100644 arch/arm/configs/qil_a9g20_defconfig
create mode 100644 arch/arm/configs/solidrun_cubox_defconfig
create mode 100644 arch/arm/configs/tegra20_colibri_iris_defconfig
create mode 100644 arch/arm/dts/imx51-babbage.dts
create mode 100644 arch/arm/dts/imx51-pinfunc.h
create mode 100644 arch/arm/dts/imx51.dtsi
create mode 100644 arch/arm/dts/imx6q-pinfunc.h
create mode 100644 arch/arm/dts/imx6q-sabrelite.dts
create mode 100644 arch/arm/dts/imx6q-sabresd.dts
create mode 100644 arch/arm/dts/imx6q.dtsi
create mode 100644 arch/arm/dts/imx6qdl-sabresd.dtsi
create mode 100644 arch/arm/dts/imx6qdl.dtsi
create mode 100644 arch/arm/dts/tegra20-colibri-iris.dts
create mode 100644 arch/arm/dts/tegra20-colibri.dtsi
create mode 100644 arch/arm/mach-mvebu/Kconfig
create mode 100644 arch/arm/mach-mvebu/Makefile
create mode 100644 arch/arm/mach-mvebu/armada-370-xp.c
create mode 100644 arch/arm/mach-mvebu/common.c
create mode 100644 arch/arm/mach-mvebu/dove.c
create mode 100644 arch/arm/mach-mvebu/include/mach/armada-370-xp-regs.h
create mode 100644 arch/arm/mach-mvebu/include/mach/common.h
create mode 100644 arch/arm/mach-mvebu/include/mach/debug_ll.h
create mode 100644 arch/arm/mach-mvebu/include/mach/dove-regs.h
create mode 100644 arch/arm/mach-mvebu/include/mach/dove.h
create mode 100644 arch/arm/mach-mvebu/include/mach/kirkwood-regs.h
create mode 100644 arch/arm/mach-mvebu/include/mach/kirkwood.h
create mode 100644 arch/arm/mach-mvebu/include/mach/lowlevel.h
create mode 100644 arch/arm/mach-mvebu/include/mach/mvebu.h
create mode 100644 arch/arm/mach-mvebu/kirkwood.c
create mode 100644 arch/arm/mach-mvebu/lowlevel.c
create mode 100644 arch/mips/boards/netgear-wg102/Kconfig
create mode 100644 arch/mips/boards/netgear-wg102/Makefile
create mode 100644 arch/mips/boards/netgear-wg102/ram.c
create mode 100644 arch/mips/boards/rzx50/include/board/board_pbl_start.h
create mode 100644 arch/mips/boot/dtb.c
create mode 100644 arch/mips/dts/Makefile
create mode 100644 arch/mips/dts/qemu-malta.dts
create mode 100644 arch/mips/dts/skeleton.dtsi
create mode 100644 arch/mips/include/asm/debug_ll_ns16550.h
delete mode 100644 arch/mips/include/debug_ll_ns16550.h
create mode 100644 arch/mips/mach-ar231x/Kconfig
create mode 100644 arch/mips/mach-ar231x/Makefile
create mode 100644 arch/mips/mach-ar231x/ar231x.c
create mode 100644 arch/mips/mach-ar231x/ar231x_reset.c
create mode 100644 arch/mips/mach-ar231x/board.c
create mode 100644 arch/mips/mach-ar231x/include/mach/ar2312_regs.h
create mode 100644 arch/mips/mach-ar231x/include/mach/ar231x_platform.h
create mode 100644 arch/mips/mach-xburst/include/mach/debug_ll_jz4750d.h
create mode 100644 arch/mips/mach-xburst/include/mach/devices.h
create mode 100644 arch/mips/mach-xburst/serial.c
create mode 100644 arch/ppc/boards/.gitignore
create mode 100644 commands/detect.c
create mode 100644 drivers/clocksource/mvebu.c
create mode 100644 drivers/clocksource/orion.c
create mode 100644 drivers/mci/mci-bcm2835.c
create mode 100644 drivers/mci/mci-bcm2835.h
create mode 100644 drivers/mci/sdhci.h
delete mode 100644 drivers/mci/twl6030.c
create mode 100644 drivers/net/ar231x.c
create mode 100644 drivers/net/ar231x.h
create mode 100644 drivers/of/mem_generic.c
create mode 100644 drivers/pinctrl/pinctrl-tegra20.c
create mode 100644 drivers/usb/core/of.c
delete mode 100644 include/mci/twl6030.h
create mode 100644 scripts/imx/.gitignore
create mode 100644 scripts/imx/Makefile
create mode 100644 scripts/imx/README
create mode 100644 scripts/imx/imx-image.c
create mode 100644 scripts/imx/imx-usb-loader.c
create mode 100644 scripts/kwbimage.c
create mode 100644 scripts/kwboot.c
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2013-07-02 14:07 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130702140646.GF516@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox