* [PATCH 1/2] ARM: i.MX: move esdctl device registration to soc_init
@ 2013-08-20 9:07 Sascha Hauer
2013-08-20 9:07 ` [PATCH 2/2] ARM: dts: imx53 qsb: remove wrong memory bank Sascha Hauer
0 siblings, 1 reply; 4+ messages in thread
From: Sascha Hauer @ 2013-08-20 9:07 UTC (permalink / raw)
To: barebox
The esdctl devices are currently not in the devicetrees. this means
they are not registered when booting from the devicetree. Move the
device registration from soc_devices_init to soc_init which is called
even with devicetree support so that we get esdctl devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/imx1.c | 2 +-
arch/arm/mach-imx/imx25.c | 2 +-
arch/arm/mach-imx/imx27.c | 4 ++--
arch/arm/mach-imx/imx31.c | 2 +-
arch/arm/mach-imx/imx35.c | 2 +-
arch/arm/mach-imx/imx51.c | 2 +-
arch/arm/mach-imx/imx53.c | 2 +-
7 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-imx/imx1.c b/arch/arm/mach-imx/imx1.c
index ecd71b8..78a0242 100644
--- a/arch/arm/mach-imx/imx1.c
+++ b/arch/arm/mach-imx/imx1.c
@@ -55,6 +55,7 @@ void imx1_setup_eimcs(size_t cs, unsigned upper, unsigned lower)
int imx1_init(void)
{
imx1_detect_reset_source();
+ add_generic_device("imx1-sdramc", 0, NULL, MX1_SDRAMC_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
return 0;
}
@@ -70,7 +71,6 @@ int imx1_devices_init(void)
add_generic_device("imx1-gpio", 2, NULL, MX1_GPIO3_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
add_generic_device("imx1-gpio", 3, NULL, MX1_GPIO4_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
add_generic_device("imx1-wdt", 0, NULL, MX1_WDT_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
- add_generic_device("imx1-sdramc", 0, NULL, MX1_SDRAMC_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
return 0;
}
diff --git a/arch/arm/mach-imx/imx25.c b/arch/arm/mach-imx/imx25.c
index 1d94419..1f87787 100644
--- a/arch/arm/mach-imx/imx25.c
+++ b/arch/arm/mach-imx/imx25.c
@@ -56,6 +56,7 @@ u64 imx_uid(void)
int imx25_init(void)
{
imx25_boot_save_loc((void *)MX25_CCM_BASE_ADDR);
+ add_generic_device("imx25-esdctl", 0, NULL, MX25_ESDCTL_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
return 0;
}
@@ -73,7 +74,6 @@ int imx25_devices_init(void)
add_generic_device("imx31-gpio", 2, NULL, MX25_GPIO3_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
add_generic_device("imx31-gpio", 3, NULL, MX25_GPIO4_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
add_generic_device("imx21-wdt", 0, NULL, MX25_WDOG_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
- add_generic_device("imx25-esdctl", 0, NULL, MX25_ESDCTL_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
return 0;
}
diff --git a/arch/arm/mach-imx/imx27.c b/arch/arm/mach-imx/imx27.c
index e0f4765..d3eaa87 100644
--- a/arch/arm/mach-imx/imx27.c
+++ b/arch/arm/mach-imx/imx27.c
@@ -101,6 +101,8 @@ int imx27_init(void)
{
imx27_silicon_revision();
imx27_boot_save_loc((void *)MX27_SYSCTRL_BASE_ADDR);
+ add_generic_device("imx27-esdctl", DEVICE_ID_SINGLE, NULL,
+ MX27_ESDCTL_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
return 0;
}
@@ -124,8 +126,6 @@ int imx27_devices_init(void)
add_generic_device("imx1-gpio", 4, NULL, MX27_GPIO5_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
add_generic_device("imx1-gpio", 5, NULL, MX27_GPIO6_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
add_generic_device("imx21-wdt", 0, NULL, MX27_WDOG_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
- add_generic_device("imx27-esdctl", DEVICE_ID_SINGLE, NULL,
- MX27_ESDCTL_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
add_generic_device("imx27-usb-misc", 0, NULL, MX27_USB_OTG_BASE_ADDR + 0x600, 0x100, IORESOURCE_MEM, NULL);
return 0;
diff --git a/arch/arm/mach-imx/imx31.c b/arch/arm/mach-imx/imx31.c
index eb0c415..3013f02 100644
--- a/arch/arm/mach-imx/imx31.c
+++ b/arch/arm/mach-imx/imx31.c
@@ -29,6 +29,7 @@ void imx31_setup_weimcs(size_t cs, unsigned upper, unsigned lower,
int imx31_init(void)
{
+ add_generic_device("imx31-esdctl", 0, NULL, MX31_ESDCTL_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
return 0;
}
@@ -44,7 +45,6 @@ int imx31_devices_init(void)
add_generic_device("imx31-gpio", 1, NULL, MX31_GPIO2_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
add_generic_device("imx31-gpio", 2, NULL, MX31_GPIO3_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
add_generic_device("imx21-wdt", 0, NULL, MX31_WDOG_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
- add_generic_device("imx31-esdctl", 0, NULL, MX31_ESDCTL_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
add_generic_device("imx31-usb-misc", 0, NULL, MX31_USB_OTG_BASE_ADDR + 0x600, 0x100, IORESOURCE_MEM, NULL);
return 0;
diff --git a/arch/arm/mach-imx/imx35.c b/arch/arm/mach-imx/imx35.c
index 14ddba3..40f5770 100644
--- a/arch/arm/mach-imx/imx35.c
+++ b/arch/arm/mach-imx/imx35.c
@@ -56,6 +56,7 @@ int imx35_init(void)
imx35_silicon_revision();
imx35_boot_save_loc((void *)MX35_CCM_BASE_ADDR);
+ add_generic_device("imx35-esdctl", 0, NULL, MX35_ESDCTL_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
return 0;
}
@@ -72,7 +73,6 @@ int imx35_devices_init(void)
add_generic_device("imx31-gpio", 1, NULL, MX35_GPIO2_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
add_generic_device("imx31-gpio", 2, NULL, MX35_GPIO3_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
add_generic_device("imx21-wdt", 0, NULL, MX35_WDOG_BASE_ADDR, 0x4000, IORESOURCE_MEM, NULL);
- add_generic_device("imx35-esdctl", 0, NULL, MX35_ESDCTL_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
return 0;
}
diff --git a/arch/arm/mach-imx/imx51.c b/arch/arm/mach-imx/imx51.c
index bcb3a76..a0b627f 100644
--- a/arch/arm/mach-imx/imx51.c
+++ b/arch/arm/mach-imx/imx51.c
@@ -45,6 +45,7 @@ int imx51_init(void)
{
imx_set_silicon_revision("i.MX51", imx51_silicon_revision());
imx51_boot_save_loc((void *)MX51_SRC_BASE_ADDR);
+ add_generic_device("imx51-esdctl", 0, NULL, MX51_ESDCTL_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
return 0;
}
@@ -62,7 +63,6 @@ int imx51_devices_init(void)
add_generic_device("imx31-gpio", 2, NULL, MX51_GPIO3_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
add_generic_device("imx31-gpio", 3, NULL, MX51_GPIO4_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
add_generic_device("imx21-wdt", 0, NULL, MX51_WDOG_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
- add_generic_device("imx51-esdctl", 0, NULL, MX51_ESDCTL_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
add_generic_device("imx51-usb-misc", 0, NULL, MX51_OTG_BASE_ADDR + 0x800, 0x100, IORESOURCE_MEM, NULL);
return 0;
diff --git a/arch/arm/mach-imx/imx53.c b/arch/arm/mach-imx/imx53.c
index 3e1b7fc..62e65e0 100644
--- a/arch/arm/mach-imx/imx53.c
+++ b/arch/arm/mach-imx/imx53.c
@@ -54,6 +54,7 @@ int imx53_init(void)
{
imx53_silicon_revision();
imx53_boot_save_loc((void *)MX53_SRC_BASE_ADDR);
+ add_generic_device("imx53-esdctl", 0, NULL, MX53_ESDCTL_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
return 0;
}
@@ -74,7 +75,6 @@ int imx53_devices_init(void)
add_generic_device("imx31-gpio", 5, NULL, MX53_GPIO6_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
add_generic_device("imx31-gpio", 6, NULL, MX53_GPIO7_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
add_generic_device("imx21-wdt", 0, NULL, MX53_WDOG1_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
- add_generic_device("imx53-esdctl", 0, NULL, MX53_ESDCTL_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
return 0;
}
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH 2/2] ARM: dts: imx53 qsb: remove wrong memory bank
2013-08-20 9:07 [PATCH 1/2] ARM: i.MX: move esdctl device registration to soc_init Sascha Hauer
@ 2013-08-20 9:07 ` Sascha Hauer
2013-08-21 14:32 ` [SPAM] " Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 1 reply; 4+ messages in thread
From: Sascha Hauer @ 2013-08-20 9:07 UTC (permalink / raw)
To: barebox
The i.MX53 qsb has 1GiB of memory, but it's divided into two non
contigous banks. Remove the wrong memory node since it's overwritten
with the correct values during wuntime anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/imx53-qsb.dts | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm/dts/imx53-qsb.dts b/arch/arm/dts/imx53-qsb.dts
index 3be4ff2..f988ca9 100644
--- a/arch/arm/dts/imx53-qsb.dts
+++ b/arch/arm/dts/imx53-qsb.dts
@@ -26,10 +26,6 @@
};
};
- memory {
- reg = <0x70000000 0x40000000>;
- };
-
display@di0 {
compatible = "fsl,imx-parallel-display";
crtcs = <&ipu 0>;
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [SPAM] [PATCH 2/2] ARM: dts: imx53 qsb: remove wrong memory bank
2013-08-20 9:07 ` [PATCH 2/2] ARM: dts: imx53 qsb: remove wrong memory bank Sascha Hauer
@ 2013-08-21 14:32 ` Jean-Christophe PLAGNIOL-VILLARD
2013-08-22 7:08 ` Sascha Hauer
0 siblings, 1 reply; 4+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-08-21 14:32 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
On 11:07 Tue 20 Aug , Sascha Hauer wrote:
> The i.MX53 qsb has 1GiB of memory, but it's divided into two non
> contigous banks. Remove the wrong memory node since it's overwritten
> with the correct values during wuntime anyway.
wuntime update is cool ;)
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> arch/arm/dts/imx53-qsb.dts | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/arch/arm/dts/imx53-qsb.dts b/arch/arm/dts/imx53-qsb.dts
> index 3be4ff2..f988ca9 100644
> --- a/arch/arm/dts/imx53-qsb.dts
> +++ b/arch/arm/dts/imx53-qsb.dts
> @@ -26,10 +26,6 @@
> };
> };
>
> - memory {
> - reg = <0x70000000 0x40000000>;
> - };
> -
> display@di0 {
> compatible = "fsl,imx-parallel-display";
> crtcs = <&ipu 0>;
> --
> 1.8.4.rc3
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [SPAM] [PATCH 2/2] ARM: dts: imx53 qsb: remove wrong memory bank
2013-08-21 14:32 ` [SPAM] " Jean-Christophe PLAGNIOL-VILLARD
@ 2013-08-22 7:08 ` Sascha Hauer
0 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2013-08-22 7:08 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox
On Wed, Aug 21, 2013 at 04:32:45PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 11:07 Tue 20 Aug , Sascha Hauer wrote:
> > The i.MX53 qsb has 1GiB of memory, but it's divided into two non
> > contigous banks. Remove the wrong memory node since it's overwritten
> > with the correct values during wuntime anyway.
> wuntime update is cool ;)
Yeah ;)
Fixed and applied.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-08-22 7:08 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-20 9:07 [PATCH 1/2] ARM: i.MX: move esdctl device registration to soc_init Sascha Hauer
2013-08-20 9:07 ` [PATCH 2/2] ARM: dts: imx53 qsb: remove wrong memory bank Sascha Hauer
2013-08-21 14:32 ` [SPAM] " Jean-Christophe PLAGNIOL-VILLARD
2013-08-22 7:08 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox