mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH 1/1] atmel_mci: add devname pdata support
@ 2013-09-17  7:50 Jean-Christophe PLAGNIOL-VILLARD
  2013-09-18  6:48 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-09-17  7:50 UTC (permalink / raw)
  To: barebox

so we can specify the devname in the board

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/include/mach/board.h | 1 +
 drivers/mci/atmel_mci.c                 | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index d695020..aa0fdae 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -150,6 +150,7 @@ struct atmel_mci_platform_data {
 	unsigned bus_width;
 	int detect_pin;
 	int wp_pin;
+	char *devname;
 };
 
 void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data);
diff --git a/drivers/mci/atmel_mci.c b/drivers/mci/atmel_mci.c
index dca3813..36107a6 100644
--- a/drivers/mci/atmel_mci.c
+++ b/drivers/mci/atmel_mci.c
@@ -563,6 +563,7 @@ static int atmci_probe(struct device_d *hw_dev)
 	host->mci.init = atmci_reset;
 	host->mci.card_present = atmci_card_present;
 	host->mci.hw_dev = hw_dev;
+	host->mci.devname = pd->devname;
 
 	if (pd->bus_width >= 4)
 		host->mci.host_caps |= MMC_CAP_4_BIT_DATA;
-- 
1.8.4.rc1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2013-09-18  6:48 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-09-17  7:50 [PATCH 1/1] atmel_mci: add devname pdata support Jean-Christophe PLAGNIOL-VILLARD
2013-09-18  6:48 ` Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox