From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/1] Animeo IP: add usb host support
Date: Fri, 20 Sep 2013 08:35:13 +0200 [thread overview]
Message-ID: <20130920063513.GX30088@pengutronix.de> (raw)
In-Reply-To: <1379594927-3859-1-git-send-email-plagnioj@jcrosoft.com>
On Thu, Sep 19, 2013 at 02:48:47PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
> arch/arm/boards/animeo_ip/init.c | 16 ++++++++++++++++
> arch/arm/configs/animeo_ip_defconfig | 5 +++++
> 2 files changed, 21 insertions(+)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/boards/animeo_ip/init.c b/arch/arm/boards/animeo_ip/init.c
> index 56b8df2..5419ddb 100644
> --- a/arch/arm/boards/animeo_ip/init.c
> +++ b/arch/arm/boards/animeo_ip/init.c
> @@ -146,6 +146,21 @@ static void animeo_ip_add_device_mci(void)
> static void animeo_ip_add_device_mci(void) {}
> #endif
>
> +/*
> + * USB Host port
> + */
> +static struct at91_usbh_data __initdata animeo_ip_usbh_data = {
> + .ports = 2,
> + .vbus_pin = {AT91_PIN_PB15, -EINVAL},
> + .vbus_pin_active_low = {0, 0},
> +
> +};
> +
> +static void animeo_ip_add_device_usb(void)
> +{
> + at91_add_device_usbh_ohci(&animeo_ip_usbh_data);
> +}
> +
> struct gpio_bicolor_led leds[] = {
> {
> .gpio_c0 = AT91_PIN_PC17,
> @@ -216,6 +231,7 @@ static int animeo_ip_devices_init(void)
> animeo_ip_power_control();
> animeo_ip_add_device_nand();
> at91_add_device_eth(0, &macb_pdata);
> + animeo_ip_add_device_usb();
> animeo_ip_add_device_mci();
> animeo_ip_add_device_buttons();
> animeo_ip_add_device_led();
> diff --git a/arch/arm/configs/animeo_ip_defconfig b/arch/arm/configs/animeo_ip_defconfig
> index 23e7278..7f6961f 100644
> --- a/arch/arm/configs/animeo_ip_defconfig
> +++ b/arch/arm/configs/animeo_ip_defconfig
> @@ -56,6 +56,8 @@ CONFIG_NET_NFS=y
> CONFIG_NET_PING=y
> CONFIG_MICREL_PHY=y
> CONFIG_DRIVER_NET_MACB=y
> +CONFIG_NET_USB=y
> +CONFIG_NET_USB_ASIX=y
> # CONFIG_SPI is not set
> CONFIG_MTD=y
> # CONFIG_MTD_OOB_DEVICE is not set
> @@ -65,6 +67,9 @@ CONFIG_NAND=y
> # CONFIG_NAND_ECC_HW_NONE is not set
> CONFIG_NAND_ATMEL=y
> CONFIG_UBI=y
> +CONFIG_USB=y
> +CONFIG_USB_OHCI=y
> +CONFIG_USB_OHCI_AT91=y
> CONFIG_MCI=y
> CONFIG_MCI_STARTUP=y
> CONFIG_MCI_ATMEL=y
> --
> 1.8.4.rc1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2013-09-20 6:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-19 12:48 Jean-Christophe PLAGNIOL-VILLARD
2013-09-20 6:35 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130920063513.GX30088@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox