* [PATCH] USB: Check init/post_init errors
@ 2013-10-21 8:24 Alexander Shiyan
2013-10-22 6:53 ` Sascha Hauer
0 siblings, 1 reply; 2+ messages in thread
From: Alexander Shiyan @ 2013-10-21 8:24 UTC (permalink / raw)
To: barebox
Host with inoperable ULPI able to bring the system into an
infinite loop. The patch adds error checking during initialization
to avoid this.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
drivers/usb/host/ehci-hcd.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index cb6a592..2da3edd 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -748,6 +748,7 @@ static int ehci_init(struct usb_host *host)
struct ehci_priv *ehci = to_ehci(host);
uint32_t reg;
uint32_t cmd;
+ int ret = 0;
ehci_halt(ehci);
@@ -755,8 +756,11 @@ static int ehci_init(struct usb_host *host)
if (ehci_reset(ehci) != 0)
return -1;
- if (ehci->init)
- ehci->init(ehci->drvdata);
+ if (ehci->init) {
+ ret = ehci->init(ehci->drvdata);
+ if (ret)
+ return ret;
+ }
ehci->qh_list->qh_link = cpu_to_hc32((uint32_t)ehci->qh_list | QH_LINK_TYPE_QH);
ehci->qh_list->qh_endpt1 = cpu_to_hc32((1 << 15) | (USB_SPEED_HIGH << 12));
@@ -799,9 +803,9 @@ static int ehci_init(struct usb_host *host)
ehci->rootdev = 0;
if (ehci->post_init)
- ehci->post_init(ehci->drvdata);
+ ret = ehci->post_init(ehci->drvdata);
- return 0;
+ return ret;
}
static int
--
1.8.1.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] USB: Check init/post_init errors
2013-10-21 8:24 [PATCH] USB: Check init/post_init errors Alexander Shiyan
@ 2013-10-22 6:53 ` Sascha Hauer
0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2013-10-22 6:53 UTC (permalink / raw)
To: Alexander Shiyan; +Cc: barebox
On Mon, Oct 21, 2013 at 12:24:22PM +0400, Alexander Shiyan wrote:
> Host with inoperable ULPI able to bring the system into an
> infinite loop. The patch adds error checking during initialization
> to avoid this.
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Applied, thanks
Sascha
> ---
> drivers/usb/host/ehci-hcd.c | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
> index cb6a592..2da3edd 100644
> --- a/drivers/usb/host/ehci-hcd.c
> +++ b/drivers/usb/host/ehci-hcd.c
> @@ -748,6 +748,7 @@ static int ehci_init(struct usb_host *host)
> struct ehci_priv *ehci = to_ehci(host);
> uint32_t reg;
> uint32_t cmd;
> + int ret = 0;
>
> ehci_halt(ehci);
>
> @@ -755,8 +756,11 @@ static int ehci_init(struct usb_host *host)
> if (ehci_reset(ehci) != 0)
> return -1;
>
> - if (ehci->init)
> - ehci->init(ehci->drvdata);
> + if (ehci->init) {
> + ret = ehci->init(ehci->drvdata);
> + if (ret)
> + return ret;
> + }
>
> ehci->qh_list->qh_link = cpu_to_hc32((uint32_t)ehci->qh_list | QH_LINK_TYPE_QH);
> ehci->qh_list->qh_endpt1 = cpu_to_hc32((1 << 15) | (USB_SPEED_HIGH << 12));
> @@ -799,9 +803,9 @@ static int ehci_init(struct usb_host *host)
> ehci->rootdev = 0;
>
> if (ehci->post_init)
> - ehci->post_init(ehci->drvdata);
> + ret = ehci->post_init(ehci->drvdata);
>
> - return 0;
> + return ret;
> }
>
> static int
> --
> 1.8.1.5
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-10-22 6:53 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-10-21 8:24 [PATCH] USB: Check init/post_init errors Alexander Shiyan
2013-10-22 6:53 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox