From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp3-g21.free.fr ([2a01:e0c:1:1599::12]) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1VdLlS-0006HX-8L for barebox@lists.infradead.org; Mon, 04 Nov 2013 15:08:28 +0000 Date: Mon, 4 Nov 2013 16:07:55 +0100 From: Eric =?ISO-8859-1?B?QuluYXJk?= Message-ID: <20131104160755.6fbae688@e6520eb> In-Reply-To: <5277B6A1.3010106@kiwigrid.com> References: <52778B89.3000208@kiwigrid.com> <20131104134847.6d9a5e8c@e6520eb> <5277B6A1.3010106@kiwigrid.com> Mime-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: barebox on i.MX53 in serial downloader boot mode To: "Wjatscheslaw Stoljarski (Slawa)" Cc: barebox@lists.infradead.org Hi Wjatscheslaw, Le Mon, 04 Nov 2013 16:00:49 +0100, "Wjatscheslaw Stoljarski (Slawa)" a =E9crit : > On 11/04/2013 01:48 PM, Eric B=E9nard wrote: > > Hi, > >> has anyone tried to start barebox on i.MX53 in 11 boot mode (serial > >> downloader)? I've tried on Freescale Loco board with pmic da9053, but > >> without success. In 00 boot mode (internal boot) works perfectly. U-Bo= ot > >> works in both modes. DCD in u-boot and in barebox is the same. Even I > >> can turn on LEDs with DCD in 11 boot mode on Loco. > >> > > works fine here, what are you using to download barebox ? > I'm using imx-usb-loader. But I've tried MfgTool from Freescale too with = > the same result. > = ok sorry it's working here (on a custom board) in 11 boot mode but using serial port to load it. IIRC USB was only tested in 00 as a fallback when NAND flash is blank. Eric _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox