From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1VgFHg-0008T0-7Y for barebox@lists.infradead.org; Tue, 12 Nov 2013 14:49:40 +0000 From: =?iso-8859-15?q?J=FCrgen_Beisert?= Date: Tue, 12 Nov 2013 15:51:15 +0100 References: <1384266701-12608-1-git-send-email-s.hauer@pengutronix.de> <1384266701-12608-4-git-send-email-s.hauer@pengutronix.de> In-Reply-To: <1384266701-12608-4-git-send-email-s.hauer@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline Message-Id: <201311121551.15343.jbe@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 3/4] DT: Add binding for Altera FPGAs in passive-serial mode To: Sascha Hauer Cc: barebox@lists.infradead.org, devicetree@vger.kernel.org On Tuesday 12 November 2013 15:31:40 Sascha Hauer wrote: > [...] > +Required properties: > +- compatible: shall be "altr,passive-serial" > +- reg: SPI chip select > +- nstat-gpio: Specify GPIO for controlling the nstat pin > +- confd-gpio: Specify GPIO for controlling the confd pin > +- nconfig-gpio: Specify GPIO for controlling the nconfig pin A suggestion was to use the genuine signal names at the FPGA side: "nstatus", "config-done" and "nconfig" (all with the trailing "-gpio") jbe -- = Pengutronix e.K. =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 = =A0| Juergen Beisert =A0 =A0 =A0 =A0 =A0 =A0 | Linux Solutions for Science and Industry =A0 =A0 =A0| http://www.pengutroni= x.de/ | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox