From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from guitar.tcltek.co.il ([192.115.133.116] helo=mx.tkos.co.il) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1Vm4MV-0006qA-7d for barebox@lists.infradead.org; Thu, 28 Nov 2013 16:22:44 +0000 Date: Thu, 28 Nov 2013 18:22:19 +0200 From: Baruch Siach Message-ID: <20131128162219.GT32436@tarshish> References: <20131127130236.GX24559@pengutronix.de> <20131127210115.GZ24559@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: FW: Barebox on Karo TX25 To: John Parker Cc: "barebox@lists.infradead.org" Hi John, On Thu, Nov 28, 2013 at 04:13:34PM +0000, John Parker wrote: > I still have a problem with barebox freezing. > > I've tried various things as you have suggested, but have not got any further. > > Issuing wd 100, followed by wd repeated every few seconds seems to keep the > system alive so it looks like the watchdog is to blame. > > According to the mx25 reference manual the watchdog is disabled until it is > enabled by setting the WDE bit. > > I can't find anything (yet) in the startup which enables the watchdog by > default? > > Does the flash header you sent me include anything which enables the > watchdog? When the i.MX25 boots using the serial protocol boot mode (either UART or USB) the watchdog gets enabled automatically. You can't disable it. baruch -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il - _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox