* v2013.12.0
@ 2013-12-06 8:05 Sascha Hauer
2013-12-06 8:56 ` v2013.12.0 Kevin Du Huanpeng
0 siblings, 1 reply; 3+ messages in thread
From: Sascha Hauer @ 2013-12-06 8:05 UTC (permalink / raw)
To: barebox
barebox-2013.12.0 - Saint Nicholas Day edition is out.
I hope you have all put your shoes out or hung your stockings...
Here's all what happened since the last release.
Sascha
----------------------------------------------------------------
Alexander Aring (4):
mmci: remove include of mmci.h header
scripts: fix kernel-install-target config
common: add dependency !SANDBOX on target tools
mmci: add missing depends on ARM_AMBA
Alexander Shiyan (5):
USB: Check init/post_init errors
ARM: i.MX51: Update DTS template
ARM: i.MX5x: Make IIM driver kernel-compatible
USB: i.MX: Make DT dr_mode & phy_type parameters kernel compatible
USB: i.MX5x: Remove usage of MXC_EHCI_INTERNAL_PHY for OTG port
Andre Heider (18):
ARM: rpi: fix tty device name in bootargs-base
ARM: rpi: fix reading of the EMMC clock for CONFIG_MMU
ARM: cache: restore cache functions from the PBL
ARM: cache: do not crash when the MMU isn't yet setup
common: add a macro to align an array on the stack
ARM: bcm2835: cleanup clock registering
ARM: bcm2835: register the clocksource driver earlier
ARM: bcm2835: register the clocksource device earlier
ARM: bcm2835: add a mailbox driver for VideoCore
ARM: rpi: register a clkdev for the eMMC clock
mci: bcm2835: use the registered device clkdev
ARM: rpi: use the proper ARM memory size
fb: add a line_length value to struct fb_info
gui: convert graphic utils to respect line_length
gui: convert the bmp renderer to respect line_length
ARM: bcm2835: add missing mbox overscan response field
video: add a BCM2835 framebuffer driver
video: set up the kernel's simple framebuffer driver
Antony Pavlov (5):
MIPS: qemu-malta: doc: drop broken mips.com link
MIPS: qemu-malta: don't use BoardID address for executable code
MIPS: qemu-malta: update qemu-malta.dox
MIPS: qemu-malta: use YAMON-style GT64120 memory map
MIPS: qemu-malta: doc: add gxemul documentation
Jan Weitzel (1):
commands: of_node fix descripion
Jean-Christophe PLAGNIOL-VILLARD (4):
mci: add max_req_size support
add: mmci drivers
vexpress: mmc support
bcm2835: move mci register at board level
Lucas Stach (1):
pinctrl: don't allow drivers to be selected by menuconfig user
Markus Pargmann (1):
net: phy: Add micrel KSZ8031
Renaud Barbier (5):
ppc: mpc85xx: mpc8544 support
ppc: mpc85xx: define Ethernet port count
ppc: mpc85xx: enable DDR driver
ppc: DA923RC: add board support
ppc: mpc85xx: build directives
Sascha Hauer (42):
mci: bcm2835: Add detect callback support for hardware device
ARM: rpi: Update defconfig
ARM: rpi: add SD card environment support
of: simplify phandle lookup
ARM: i.MX6: Add spi aliases to devicetree
mtd: raw: rename raw device
mtd: Pass device_id to add_mtd_device
mtd: m25p80: Allow to specify devicename via devicetree alias
spi: Call spi_of_register_slaves from core
spi: support dynamic bus ids
spi: Get bus_num from devicetree
kernel-install: Add missing error messages
blspec: Push device_detect into blspec_scan_device
blspec: rename _hwdevice functions to _devicename
blspec: Allow to boot partitions
blspec: Let scan functions return the number of entries found
fs: Add function to get cdev by mountpath
blspec: make cdev optional
boot: Print boot entries in the order they are
boot command: make more flexible
blspec: Make error message more clear
boot command: Add timeout support for menu
of: Add a context pointer to fixup functions
Merge branch 'for-next/bootspec'
Merge branch 'for-next/imx'
Merge branch 'for-next/mci'
Merge branch 'for-next/mips'
Merge branch 'for-next/mtd'
Merge branch 'for-next/net'
Merge branch 'for-next/of'
Merge branch 'for-next/ppc'
Merge branch 'for-next/rpi'
Merge branch 'for-next/spi'
Merge branch 'for-next/usb'
of: fdt: Fix fdt size_dt_struct
of: fdt: reorder fdt_header initialization
ARM: start: fix fdt inside valid memory check
Fix endless loop in automount code
ata: pata-imx: Add missing NULL entry in dt ids
mtd: mtdraw: drop ioctl callback for mtdraw device
ARM: i.MX external NAND boot: Add missing instruction cache invalidate
Release v2013.12.0
Uwe Kleine-König (2):
blspec: fix documention of blspec_scan_directory's return code
blspec: Fix another crash with menu disabled
Vicente Bergas (2):
OMAP4: fix writel data/address swap regression
OMAP4: fix omap4_bootsource regression
Makefile | 4 +-
arch/arm/boards/at91sam9x5ek/hw_version.c | 4 +-
arch/arm/boards/ccxmx51/ccxmx51.c | 3 +-
arch/arm/boards/highbank/init.c | 4 +-
arch/arm/boards/mioa701/env/bin/barebox_update | 8 +-
arch/arm/boards/mioa701/env/bin/dps1_update | 6 +-
.../arm/boards/raspberry-pi/env/init/bootargs-base | 2 +-
arch/arm/boards/raspberry-pi/rpi.c | 110 +++-
arch/arm/boards/vexpress/init.c | 9 +-
arch/arm/configs/rpi_defconfig | 45 +-
arch/arm/cpu/cache.c | 18 +-
arch/arm/cpu/start.c | 6 +-
arch/arm/dts/imx51.dtsi | 710 ++++++++++++---------
arch/arm/dts/imx53.dtsi | 2 +-
arch/arm/dts/imx6q-gk802.dts | 6 +-
arch/arm/dts/imx6q-tqma6x.dts | 3 +-
arch/arm/dts/imx6q.dtsi | 4 +
arch/arm/dts/imx6qdl-dfi-fs700-m60.dtsi | 8 +-
arch/arm/dts/imx6qdl-mba6x.dtsi | 5 +-
arch/arm/dts/imx6qdl.dtsi | 4 +
arch/arm/mach-bcm2835/Makefile | 2 +-
arch/arm/mach-bcm2835/core.c | 33 +-
arch/arm/mach-bcm2835/include/mach/core.h | 13 +
arch/arm/mach-bcm2835/include/mach/mbox.h | 421 ++++++++++++
arch/arm/mach-bcm2835/mbox.c | 152 +++++
arch/arm/mach-imx/external-nand-boot.c | 3 +
arch/arm/mach-imx/iim.c | 2 +-
arch/arm/mach-omap/omap4_clock.c | 176 ++---
arch/arm/mach-omap/omap4_generic.c | 10 +-
arch/arm/mach-vexpress/devices.c | 12 +-
arch/arm/mach-vexpress/include/mach/devices.h | 5 +
arch/arm/mach-vexpress/v2m.c | 1 +
.../qemu-malta/include/board/board_pbl_start.h | 65 ++
arch/mips/boards/qemu-malta/qemu-malta.dox | 9 +-
arch/mips/dts/qemu-malta.dts | 4 +-
arch/mips/include/asm/gt64120.h | 37 ++
arch/mips/mach-malta/include/mach/hardware.h | 2 +-
arch/mips/mach-malta/include/mach/mach-gt64120.h | 13 +
arch/ppc/Makefile | 1 +
arch/ppc/boards/geip-da923rc/Makefile | 7 +
arch/ppc/boards/geip-da923rc/barebox.lds.S | 155 +++++
arch/ppc/boards/geip-da923rc/config.h | 54 ++
arch/ppc/boards/geip-da923rc/da923rc.c | 212 ++++++
arch/ppc/boards/geip-da923rc/ddr.c | 169 +++++
arch/ppc/boards/geip-da923rc/env/bin/init | 4 +
arch/ppc/boards/geip-da923rc/env/config | 4 +
arch/ppc/boards/geip-da923rc/law.c | 24 +
arch/ppc/boards/geip-da923rc/nand.c | 94 +++
arch/ppc/boards/geip-da923rc/product_data.c | 66 ++
arch/ppc/boards/geip-da923rc/product_data.h | 62 ++
arch/ppc/boards/geip-da923rc/tlb.c | 69 ++
arch/ppc/configs/da923rc_defconfig | 57 ++
arch/ppc/ddr-8xxx/Makefile | 2 +
arch/ppc/include/asm/fsl_lbc.h | 12 +
arch/ppc/include/asm/processor.h | 2 +
arch/ppc/mach-mpc5xxx/cpu.c | 4 +-
arch/ppc/mach-mpc85xx/Kconfig | 32 +-
arch/ppc/mach-mpc85xx/Makefile | 3 +
arch/ppc/mach-mpc85xx/cpu.c | 6 +-
arch/ppc/mach-mpc85xx/cpuid.c | 2 +
arch/ppc/mach-mpc85xx/eth-devices.c | 2 +-
arch/ppc/mach-mpc85xx/fdt.c | 4 +-
arch/ppc/mach-mpc85xx/fsl_gpio.c | 47 ++
arch/ppc/mach-mpc85xx/include/mach/clock.h | 1 +
.../ppc/mach-mpc85xx/include/mach/config_mpc85xx.h | 7 +
arch/ppc/mach-mpc85xx/include/mach/gpio.h | 17 +
arch/ppc/mach-mpc85xx/include/mach/immap_85xx.h | 23 +
arch/ppc/mach-mpc85xx/speed.c | 18 +
commands/Kconfig | 2 +-
commands/boot.c | 355 ++++++-----
common/Kconfig | 2 +
common/blspec.c | 109 ++--
common/memory.c | 4 +-
common/oftree.c | 12 +-
drivers/ata/pata-imx.c | 2 +
drivers/clocksource/bcm2835.c | 2 +-
drivers/mci/Kconfig | 7 +
drivers/mci/Makefile | 1 +
drivers/mci/mci-bcm2835.c | 90 +--
drivers/mci/mci-bcm2835.h | 48 --
drivers/mci/mci-core.c | 38 +-
drivers/mci/mmci.c | 689 ++++++++++++++++++++
drivers/mci/mmci.h | 167 +++++
drivers/mtd/core.c | 10 +-
drivers/mtd/devices/docg3.c | 2 +-
drivers/mtd/devices/m25p80.c | 23 +-
drivers/mtd/devices/mtd_dataflash.c | 2 +-
drivers/mtd/mtdraw.c | 3 +-
drivers/mtd/nand/nand_base.c | 2 +-
drivers/mtd/nor/cfi_flash.c | 2 +-
drivers/net/phy/micrel.c | 9 +
drivers/of/base.c | 11 +-
drivers/of/fdt.c | 5 +-
drivers/pinctrl/Kconfig | 12 +-
drivers/spi/imx_spi.c | 2 -
drivers/spi/mvebu_spi.c | 3 -
drivers/spi/spi.c | 21 +-
drivers/usb/core/of.c | 4 +-
drivers/usb/host/ehci-hcd.c | 12 +-
drivers/usb/imx/imx-usb-misc.c | 3 -
drivers/video/Kconfig | 13 +
drivers/video/Makefile | 2 +
drivers/video/bcm2835.c | 136 ++++
drivers/video/fb.c | 18 +-
drivers/video/simplefb.c | 167 +++++
fs/fs.c | 15 +
include/blspec.h | 7 +-
include/common.h | 11 +
include/fb.h | 8 +
include/fs.h | 2 +
include/linux/amba/mmci.h | 42 ++
include/linux/micrel_phy.h | 1 +
include/linux/mtd/mtd.h | 2 +-
include/mci.h | 1 +
include/of.h | 3 +-
include/spi/spi.h | 2 -
lib/gui/bmp.c | 8 +-
lib/gui/graphic_utils.c | 10 +-
net/eth.c | 4 +-
scripts/Makefile | 2 +-
120 files changed, 4292 insertions(+), 897 deletions(-)
create mode 100644 arch/arm/mach-bcm2835/include/mach/mbox.h
create mode 100644 arch/arm/mach-bcm2835/mbox.c
create mode 100644 arch/mips/include/asm/gt64120.h
create mode 100644 arch/mips/mach-malta/include/mach/mach-gt64120.h
create mode 100644 arch/ppc/boards/geip-da923rc/Makefile
create mode 100644 arch/ppc/boards/geip-da923rc/barebox.lds.S
create mode 100644 arch/ppc/boards/geip-da923rc/config.h
create mode 100644 arch/ppc/boards/geip-da923rc/da923rc.c
create mode 100644 arch/ppc/boards/geip-da923rc/ddr.c
create mode 100644 arch/ppc/boards/geip-da923rc/env/bin/init
create mode 100644 arch/ppc/boards/geip-da923rc/env/config
create mode 100644 arch/ppc/boards/geip-da923rc/law.c
create mode 100644 arch/ppc/boards/geip-da923rc/nand.c
create mode 100644 arch/ppc/boards/geip-da923rc/product_data.c
create mode 100644 arch/ppc/boards/geip-da923rc/product_data.h
create mode 100644 arch/ppc/boards/geip-da923rc/tlb.c
create mode 100644 arch/ppc/configs/da923rc_defconfig
create mode 100644 arch/ppc/ddr-8xxx/Makefile
create mode 100644 arch/ppc/mach-mpc85xx/fsl_gpio.c
create mode 100644 arch/ppc/mach-mpc85xx/include/mach/gpio.h
create mode 100644 drivers/mci/mmci.c
create mode 100644 drivers/mci/mmci.h
create mode 100644 drivers/video/bcm2835.c
create mode 100644 drivers/video/simplefb.c
create mode 100644 include/linux/amba/mmci.h
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread* RE: v2013.12.0
2013-12-06 8:05 v2013.12.0 Sascha Hauer
@ 2013-12-06 8:56 ` Kevin Du Huanpeng
2013-12-06 9:28 ` v2013.12.0 'Sascha Hauer'
0 siblings, 1 reply; 3+ messages in thread
From: Kevin Du Huanpeng @ 2013-12-06 8:56 UTC (permalink / raw)
To: 'Sascha Hauer', barebox
arch/x86/lib/barebox.lds
add this file to .gitignore....
- - -
dev@bogon:~/barebox$ git status
# On branch master
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# arch/x86/lib/barebox.lds
nothing added to commit but untracked files present (use "git add" to track)
- - -
-----Original Message-----
From: barebox [mailto:barebox-bounces@lists.infradead.org] On Behalf Of Sascha Hauer
Sent: 2013年12月6日 16:06
To: barebox@lists.infradead.org
Subject: v2013.12.0
barebox-2013.12.0 - Saint Nicholas Day edition is out.
I hope you have all put your shoes out or hung your stockings...
Here's all what happened since the last release.
Sascha
----------------------------------------------------------------
Alexander Aring (4):
mmci: remove include of mmci.h header
scripts: fix kernel-install-target config
common: add dependency !SANDBOX on target tools
mmci: add missing depends on ARM_AMBA
Alexander Shiyan (5):
USB: Check init/post_init errors
ARM: i.MX51: Update DTS template
ARM: i.MX5x: Make IIM driver kernel-compatible
USB: i.MX: Make DT dr_mode & phy_type parameters kernel compatible
USB: i.MX5x: Remove usage of MXC_EHCI_INTERNAL_PHY for OTG port
Andre Heider (18):
ARM: rpi: fix tty device name in bootargs-base
ARM: rpi: fix reading of the EMMC clock for CONFIG_MMU
ARM: cache: restore cache functions from the PBL
ARM: cache: do not crash when the MMU isn't yet setup
common: add a macro to align an array on the stack
ARM: bcm2835: cleanup clock registering
ARM: bcm2835: register the clocksource driver earlier
ARM: bcm2835: register the clocksource device earlier
ARM: bcm2835: add a mailbox driver for VideoCore
ARM: rpi: register a clkdev for the eMMC clock
mci: bcm2835: use the registered device clkdev
ARM: rpi: use the proper ARM memory size
fb: add a line_length value to struct fb_info
gui: convert graphic utils to respect line_length
gui: convert the bmp renderer to respect line_length
ARM: bcm2835: add missing mbox overscan response field
video: add a BCM2835 framebuffer driver
video: set up the kernel's simple framebuffer driver
Antony Pavlov (5):
MIPS: qemu-malta: doc: drop broken mips.com link
MIPS: qemu-malta: don't use BoardID address for executable code
MIPS: qemu-malta: update qemu-malta.dox
MIPS: qemu-malta: use YAMON-style GT64120 memory map
MIPS: qemu-malta: doc: add gxemul documentation
Jan Weitzel (1):
commands: of_node fix descripion
Jean-Christophe PLAGNIOL-VILLARD (4):
mci: add max_req_size support
add: mmci drivers
vexpress: mmc support
bcm2835: move mci register at board level
Lucas Stach (1):
pinctrl: don't allow drivers to be selected by menuconfig user
Markus Pargmann (1):
net: phy: Add micrel KSZ8031
Renaud Barbier (5):
ppc: mpc85xx: mpc8544 support
ppc: mpc85xx: define Ethernet port count
ppc: mpc85xx: enable DDR driver
ppc: DA923RC: add board support
ppc: mpc85xx: build directives
Sascha Hauer (42):
mci: bcm2835: Add detect callback support for hardware device
ARM: rpi: Update defconfig
ARM: rpi: add SD card environment support
of: simplify phandle lookup
ARM: i.MX6: Add spi aliases to devicetree
mtd: raw: rename raw device
mtd: Pass device_id to add_mtd_device
mtd: m25p80: Allow to specify devicename via devicetree alias
spi: Call spi_of_register_slaves from core
spi: support dynamic bus ids
spi: Get bus_num from devicetree
kernel-install: Add missing error messages
blspec: Push device_detect into blspec_scan_device
blspec: rename _hwdevice functions to _devicename
blspec: Allow to boot partitions
blspec: Let scan functions return the number of entries found
fs: Add function to get cdev by mountpath
blspec: make cdev optional
boot: Print boot entries in the order they are
boot command: make more flexible
blspec: Make error message more clear
boot command: Add timeout support for menu
of: Add a context pointer to fixup functions
Merge branch 'for-next/bootspec'
Merge branch 'for-next/imx'
Merge branch 'for-next/mci'
Merge branch 'for-next/mips'
Merge branch 'for-next/mtd'
Merge branch 'for-next/net'
Merge branch 'for-next/of'
Merge branch 'for-next/ppc'
Merge branch 'for-next/rpi'
Merge branch 'for-next/spi'
Merge branch 'for-next/usb'
of: fdt: Fix fdt size_dt_struct
of: fdt: reorder fdt_header initialization
ARM: start: fix fdt inside valid memory check
Fix endless loop in automount code
ata: pata-imx: Add missing NULL entry in dt ids
mtd: mtdraw: drop ioctl callback for mtdraw device
ARM: i.MX external NAND boot: Add missing instruction cache invalidate
Release v2013.12.0
Uwe Kleine-König (2):
blspec: fix documention of blspec_scan_directory's return code
blspec: Fix another crash with menu disabled
Vicente Bergas (2):
OMAP4: fix writel data/address swap regression
OMAP4: fix omap4_bootsource regression
Makefile | 4 +-
arch/arm/boards/at91sam9x5ek/hw_version.c | 4 +-
arch/arm/boards/ccxmx51/ccxmx51.c | 3 +-
arch/arm/boards/highbank/init.c | 4 +-
arch/arm/boards/mioa701/env/bin/barebox_update | 8 +-
arch/arm/boards/mioa701/env/bin/dps1_update | 6 +-
.../arm/boards/raspberry-pi/env/init/bootargs-base | 2 +-
arch/arm/boards/raspberry-pi/rpi.c | 110 +++-
arch/arm/boards/vexpress/init.c | 9 +-
arch/arm/configs/rpi_defconfig | 45 +-
arch/arm/cpu/cache.c | 18 +-
arch/arm/cpu/start.c | 6 +-
arch/arm/dts/imx51.dtsi | 710 ++++++++++++---------
arch/arm/dts/imx53.dtsi | 2 +-
arch/arm/dts/imx6q-gk802.dts | 6 +-
arch/arm/dts/imx6q-tqma6x.dts | 3 +-
arch/arm/dts/imx6q.dtsi | 4 +
arch/arm/dts/imx6qdl-dfi-fs700-m60.dtsi | 8 +-
arch/arm/dts/imx6qdl-mba6x.dtsi | 5 +-
arch/arm/dts/imx6qdl.dtsi | 4 +
arch/arm/mach-bcm2835/Makefile | 2 +-
arch/arm/mach-bcm2835/core.c | 33 +-
arch/arm/mach-bcm2835/include/mach/core.h | 13 +
arch/arm/mach-bcm2835/include/mach/mbox.h | 421 ++++++++++++
arch/arm/mach-bcm2835/mbox.c | 152 +++++
arch/arm/mach-imx/external-nand-boot.c | 3 +
arch/arm/mach-imx/iim.c | 2 +-
arch/arm/mach-omap/omap4_clock.c | 176 ++---
arch/arm/mach-omap/omap4_generic.c | 10 +-
arch/arm/mach-vexpress/devices.c | 12 +-
arch/arm/mach-vexpress/include/mach/devices.h | 5 +
arch/arm/mach-vexpress/v2m.c | 1 +
.../qemu-malta/include/board/board_pbl_start.h | 65 ++
arch/mips/boards/qemu-malta/qemu-malta.dox | 9 +-
arch/mips/dts/qemu-malta.dts | 4 +-
arch/mips/include/asm/gt64120.h | 37 ++
arch/mips/mach-malta/include/mach/hardware.h | 2 +-
arch/mips/mach-malta/include/mach/mach-gt64120.h | 13 +
arch/ppc/Makefile | 1 +
arch/ppc/boards/geip-da923rc/Makefile | 7 +
arch/ppc/boards/geip-da923rc/barebox.lds.S | 155 +++++
arch/ppc/boards/geip-da923rc/config.h | 54 ++
arch/ppc/boards/geip-da923rc/da923rc.c | 212 ++++++
arch/ppc/boards/geip-da923rc/ddr.c | 169 +++++
arch/ppc/boards/geip-da923rc/env/bin/init | 4 +
arch/ppc/boards/geip-da923rc/env/config | 4 +
arch/ppc/boards/geip-da923rc/law.c | 24 +
arch/ppc/boards/geip-da923rc/nand.c | 94 +++
arch/ppc/boards/geip-da923rc/product_data.c | 66 ++
arch/ppc/boards/geip-da923rc/product_data.h | 62 ++
arch/ppc/boards/geip-da923rc/tlb.c | 69 ++
arch/ppc/configs/da923rc_defconfig | 57 ++
arch/ppc/ddr-8xxx/Makefile | 2 +
arch/ppc/include/asm/fsl_lbc.h | 12 +
arch/ppc/include/asm/processor.h | 2 +
arch/ppc/mach-mpc5xxx/cpu.c | 4 +-
arch/ppc/mach-mpc85xx/Kconfig | 32 +-
arch/ppc/mach-mpc85xx/Makefile | 3 +
arch/ppc/mach-mpc85xx/cpu.c | 6 +-
arch/ppc/mach-mpc85xx/cpuid.c | 2 +
arch/ppc/mach-mpc85xx/eth-devices.c | 2 +-
arch/ppc/mach-mpc85xx/fdt.c | 4 +-
arch/ppc/mach-mpc85xx/fsl_gpio.c | 47 ++
arch/ppc/mach-mpc85xx/include/mach/clock.h | 1 +
.../ppc/mach-mpc85xx/include/mach/config_mpc85xx.h | 7 +
arch/ppc/mach-mpc85xx/include/mach/gpio.h | 17 +
arch/ppc/mach-mpc85xx/include/mach/immap_85xx.h | 23 +
arch/ppc/mach-mpc85xx/speed.c | 18 +
commands/Kconfig | 2 +-
commands/boot.c | 355 ++++++-----
common/Kconfig | 2 +
common/blspec.c | 109 ++--
common/memory.c | 4 +-
common/oftree.c | 12 +-
drivers/ata/pata-imx.c | 2 +
drivers/clocksource/bcm2835.c | 2 +-
drivers/mci/Kconfig | 7 +
drivers/mci/Makefile | 1 +
drivers/mci/mci-bcm2835.c | 90 +--
drivers/mci/mci-bcm2835.h | 48 --
drivers/mci/mci-core.c | 38 +-
drivers/mci/mmci.c | 689 ++++++++++++++++++++
drivers/mci/mmci.h | 167 +++++
drivers/mtd/core.c | 10 +-
drivers/mtd/devices/docg3.c | 2 +-
drivers/mtd/devices/m25p80.c | 23 +-
drivers/mtd/devices/mtd_dataflash.c | 2 +-
drivers/mtd/mtdraw.c | 3 +-
drivers/mtd/nand/nand_base.c | 2 +-
drivers/mtd/nor/cfi_flash.c | 2 +-
drivers/net/phy/micrel.c | 9 +
drivers/of/base.c | 11 +-
drivers/of/fdt.c | 5 +-
drivers/pinctrl/Kconfig | 12 +-
drivers/spi/imx_spi.c | 2 -
drivers/spi/mvebu_spi.c | 3 -
drivers/spi/spi.c | 21 +-
drivers/usb/core/of.c | 4 +-
drivers/usb/host/ehci-hcd.c | 12 +-
drivers/usb/imx/imx-usb-misc.c | 3 -
drivers/video/Kconfig | 13 +
drivers/video/Makefile | 2 +
drivers/video/bcm2835.c | 136 ++++
drivers/video/fb.c | 18 +-
drivers/video/simplefb.c | 167 +++++
fs/fs.c | 15 +
include/blspec.h | 7 +-
include/common.h | 11 +
include/fb.h | 8 +
include/fs.h | 2 +
include/linux/amba/mmci.h | 42 ++
include/linux/micrel_phy.h | 1 +
include/linux/mtd/mtd.h | 2 +-
include/mci.h | 1 +
include/of.h | 3 +-
include/spi/spi.h | 2 -
lib/gui/bmp.c | 8 +-
lib/gui/graphic_utils.c | 10 +-
net/eth.c | 4 +-
scripts/Makefile | 2 +-
120 files changed, 4292 insertions(+), 897 deletions(-) create mode 100644 arch/arm/mach-bcm2835/include/mach/mbox.h
create mode 100644 arch/arm/mach-bcm2835/mbox.c create mode 100644 arch/mips/include/asm/gt64120.h create mode 100644 arch/mips/mach-malta/include/mach/mach-gt64120.h
create mode 100644 arch/ppc/boards/geip-da923rc/Makefile
create mode 100644 arch/ppc/boards/geip-da923rc/barebox.lds.S
create mode 100644 arch/ppc/boards/geip-da923rc/config.h
create mode 100644 arch/ppc/boards/geip-da923rc/da923rc.c
create mode 100644 arch/ppc/boards/geip-da923rc/ddr.c
create mode 100644 arch/ppc/boards/geip-da923rc/env/bin/init
create mode 100644 arch/ppc/boards/geip-da923rc/env/config
create mode 100644 arch/ppc/boards/geip-da923rc/law.c
create mode 100644 arch/ppc/boards/geip-da923rc/nand.c
create mode 100644 arch/ppc/boards/geip-da923rc/product_data.c
create mode 100644 arch/ppc/boards/geip-da923rc/product_data.h
create mode 100644 arch/ppc/boards/geip-da923rc/tlb.c
create mode 100644 arch/ppc/configs/da923rc_defconfig
create mode 100644 arch/ppc/ddr-8xxx/Makefile create mode 100644 arch/ppc/mach-mpc85xx/fsl_gpio.c create mode 100644 arch/ppc/mach-mpc85xx/include/mach/gpio.h
create mode 100644 drivers/mci/mmci.c
create mode 100644 drivers/mci/mmci.h
create mode 100644 drivers/video/bcm2835.c create mode 100644 drivers/video/simplefb.c create mode 100644 include/linux/amba/mmci.h
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: v2013.12.0
2013-12-06 8:56 ` v2013.12.0 Kevin Du Huanpeng
@ 2013-12-06 9:28 ` 'Sascha Hauer'
0 siblings, 0 replies; 3+ messages in thread
From: 'Sascha Hauer' @ 2013-12-06 9:28 UTC (permalink / raw)
To: Kevin Du Huanpeng; +Cc: barebox
Hi Kevin,
On Fri, Dec 06, 2013 at 04:56:54PM +0800, Kevin Du Huanpeng wrote:
> arch/x86/lib/barebox.lds
> add this file to .gitignore....
> - - -
> dev@bogon:~/barebox$ git status
> # On branch master
> # Untracked files:
> # (use "git add <file>..." to include in what will be committed)
> #
> # arch/x86/lib/barebox.lds
> nothing added to commit but untracked files present (use "git add" to track)
We normally communicate changes to barebox with patches. So if you want
to have something changed in barebox you should send patches. For doing
so you should read Documentation/SubmittingPatches in the Linux Kernel
(Some of this may be outdated, but most of it is true and applies to
barebox aswell)
As a git user the techincal stuff probably goes down to:
git checkout origin/master -b myworkbranch
<commit changes>
git send-email --to "barebox@lists.infradead.org" origin/master
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-12-06 9:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-12-06 8:05 v2013.12.0 Sascha Hauer
2013-12-06 8:56 ` v2013.12.0 Kevin Du Huanpeng
2013-12-06 9:28 ` v2013.12.0 'Sascha Hauer'
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox