From: Sascha Hauer <s.hauer@pengutronix.de>
To: "Eric Bénard" <eric@eukrea.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] nand_imx: fix read ONFI param on NFC v21
Date: Thu, 12 Dec 2013 09:44:04 +0100 [thread overview]
Message-ID: <20131212084404.GI24559@pengutronix.de> (raw)
In-Reply-To: <1386786267-6462-1-git-send-email-eric@eukrea.com>
On Wed, Dec 11, 2013 at 07:24:27PM +0100, Eric Bénard wrote:
> tested on an i.MX25 where we now get :
> nand: ONFI param page 0 valid
> nand: ONFI flash detected
> nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
>
> Signed-off-by: Eric Bénard <eric@eukrea.com>
Applied, thanks
Sascha
> ---
> drivers/mtd/nand/nand_imx.c | 25 +++++++++----------------
> 1 file changed, 9 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/mtd/nand/nand_imx.c b/drivers/mtd/nand/nand_imx.c
> index 965b41e..fd57b4d 100644
> --- a/drivers/mtd/nand/nand_imx.c
> +++ b/drivers/mtd/nand/nand_imx.c
> @@ -403,12 +403,15 @@ static void send_read_id_v1_v2(struct imx_nand_host *host)
> memcpy32(host->data_buf, host->main_area0, 16);
> }
>
> -/* FIXME : to check on real HW */
> static void send_read_param_v1_v2(struct imx_nand_host *host)
> {
> struct nand_chip *this = &host->nand;
> + u32 backup = readw(host->regs + NFC_V1_V2_CONFIG1);
>
> - /* NANDFC buffer 0 is used for device ID output */
> + /* Temporary disable ECC to be able to read param page */
> + writew(backup & ~NFC_V1_V2_CONFIG1_ECC_EN, host->regs + NFC_V1_V2_CONFIG1);
> +
> + /* NANDFC buffer 0 is used for param output */
> writew(0x0, host->regs + NFC_V1_V2_BUF_ADDR);
>
> writew(NFC_OUTPUT, host->regs + NFC_V1_V2_CONFIG2);
> @@ -416,20 +419,10 @@ static void send_read_param_v1_v2(struct imx_nand_host *host)
> /* Wait for operation to complete */
> wait_op_done(host);
>
> - if (this->options & NAND_BUSWIDTH_16) {
> - volatile u16 *mainbuf = host->main_area0;
> -
> - /*
> - * Pack the every-other-byte result for 16-bit ID reads
> - * into every-byte as the generic code expects and various
> - * chips implement.
> - */
> -
> - mainbuf[0] = (mainbuf[0] & 0xff) | ((mainbuf[1] & 0xff) << 8);
> - mainbuf[1] = (mainbuf[2] & 0xff) | ((mainbuf[3] & 0xff) << 8);
> - mainbuf[2] = (mainbuf[4] & 0xff) | ((mainbuf[5] & 0xff) << 8);
> - }
> memcpy32(host->data_buf, host->main_area0, 1024);
> +
> + /* Restore original CONFIG1 value */
> + writew(backup, host->regs + NFC_V1_V2_CONFIG1);
> }
> /*
> * This function requests the NANDFC to perform a read of the
> @@ -1147,7 +1140,7 @@ static int __init imxnd_probe(struct device_d *dev)
> host->send_addr = send_addr_v1_v2;
> host->send_page = send_page_v1_v2;
> host->send_read_id = send_read_id_v1_v2;
> - host->send_read_param = send_read_param_v1_v2; /* FIXME : to check */
> + host->send_read_param = send_read_param_v1_v2;
> host->get_dev_status = get_dev_status_v1_v2;
> host->check_int = check_int_v1_v2;
> }
> --
> 1.8.3.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2013-12-12 8:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-11 18:24 Eric Bénard
2013-12-12 8:44 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131212084404.GI24559@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=eric@eukrea.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox