mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: "Eric Bénard" <eric@eukrea.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 2/7] ARM: i.MX53: Add sata to devicetree
Date: Mon, 10 Feb 2014 10:11:52 +0100	[thread overview]
Message-ID: <20140210091152.GM17250@pengutronix.de> (raw)
In-Reply-To: <20140210090347.GK17250@pengutronix.de>

On Mon, Feb 10, 2014 at 10:03:47AM +0100, Sascha Hauer wrote:
> > > > > I suggest just sync imx53.dtsi from the linux-next, as a result we will have
> > > > > non-modified version of kernel templates.
> > > > > Change as above, makes imx53.dtsi different for kernel and barebox.
> > > > > This is part of sata node from the kernel:
> > > > > 		sata: sata@10000000 {
> > > > > 			compatible = "fsl,imx53-ahci";
> > > > > 			reg = <0x10000000 0x1000>;
> > > > > 			interrupts = <28>;
> > > > > 			clocks = <&clks IMX5_CLK_SATA_GATE>,
> > > > > 				 <&clks IMX5_CLK_SATA_REF>,
> > > > > 				 <&clks IMX5_CLK_AHB>;
> > > > > 			clock-names = "sata_gate", "sata_ref", "ahb";
> > > > > 			status = "disabled";
> > > > > 		};
> > > > > 
> > > > that's possible, I don't know why the clock are changed in barebox vs
> > > > linux and don't know if that's needed (I got inspiration from other
> > > > nodes)
> > > 
> > > They are identical, it's only that Alexander introduced defines for the
> > > clocks in Linux whereas in barebox we have the older versions with
> > > plain numbers.
> > > 
> > clock-names are also changed as well as the order (taken from other
> > nodes).
> 
> Oh, you are right. The order doesn't matter, but the names should be
> identical. We should use the same names in barebox as in the kernel, be
> it with defines or with numbers.

So, Eric, to sort that out for now:

- Please update the SATA entry to be compatible with the kernel, but do
  not use the Linux-next dts. This means use plain numbers, but the
  correct clock names.
- Remove the dr_mode = "host" line

With these changes this series should be fine for merging.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2014-02-10  9:12 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-08 14:16 [PATCH 1/7] sata-imx: i.MX53, use the internal 120MHz clock by default Eric Bénard
2014-02-08 14:16 ` [PATCH 2/7] ARM: i.MX53: Add sata to devicetree Eric Bénard
2014-02-08 14:26   ` Alexander Shiyan
2014-02-10  8:33     ` Sascha Hauer
2014-02-10  8:39       ` Eric Bénard
2014-02-10  8:40       ` Alexander Shiyan
2014-02-10  8:48         ` Eric Bénard
2014-02-10  8:52           ` Sascha Hauer
2014-02-10  8:54             ` Eric Bénard
2014-02-10  9:03               ` Sascha Hauer
2014-02-10  9:11                 ` Sascha Hauer [this message]
2014-03-07 10:39                   ` [PATCH v2 1/7] sata-imx: i.MX53, use the internal 120MHz clock by default Eric Bénard
2014-03-07 10:39                     ` [PATCH v2 2/7] ARM: i.MX53: Add sata to devicetree Eric Bénard
2014-03-10  7:08                       ` Sascha Hauer
2014-03-07 10:39                     ` [PATCH v2 3/7] ARM: mx53-qsrb: fix USB Eric Bénard
2014-03-07 10:40                     ` [PATCH v2 4/7] ARM: mx53-qsrb: enable USB host Eric Bénard
2014-03-07 10:40                     ` [PATCH v2 5/7] ARM: mx53-qsrb: enable USB OTG in host mode Eric Bénard
2014-03-07 10:40                     ` [PATCH v2 6/7] ARM: mx53-qsrb: enable sata Eric Bénard
2014-03-07 10:40                     ` [PATCH v2 7/7] ARM: mx53-qsb: update defconfig Eric Bénard
2014-03-10  7:09                     ` [PATCH v2 1/7] sata-imx: i.MX53, use the internal 120MHz clock by default Sascha Hauer
2014-03-10  7:51                       ` Eric Bénard
2014-03-11  5:32                         ` Sascha Hauer
2014-02-10  9:07     ` [PATCH 2/7] ARM: i.MX53: Add sata to devicetree Sascha Hauer
2014-02-10  9:15       ` Sascha Hauer
2014-02-10  9:22         ` Alexander Shiyan
2014-02-08 14:16 ` [PATCH 3/7] ARM: mx53-qsrb: fix USB Eric Bénard
2014-02-08 14:16 ` [PATCH 4/7] ARM: mx53-qsrb: enable USB host Eric Bénard
2014-02-08 14:16 ` [PATCH 5/7] ARM: mx53-qsrb: enable USB OTG in host mode Eric Bénard
2014-02-10  8:16   ` Sascha Hauer
2014-02-10  8:28     ` Eric Bénard
2014-02-10  8:31       ` Sascha Hauer
2014-02-10  8:37         ` Eric Bénard
2014-02-08 14:16 ` [PATCH 6/7] ARM: mx53-qsrb: enable sata Eric Bénard
2014-02-08 14:16 ` [PATCH 7/7] ARM: mx53-qsb: update defconfig Eric Bénard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140210091152.GM17250@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=eric@eukrea.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox