From: Sascha Hauer <s.hauer@pengutronix.de>
To: "Raphaël Poggi" <raphio98@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] Adding minimal support for the UDOO board.
Date: Mon, 17 Feb 2014 09:25:20 +0100 [thread overview]
Message-ID: <20140217082519.GN17250@pengutronix.de> (raw)
In-Reply-To: <CACqcpZDwF=weDsC-+jw97+V4Rw33xMLXUrt3OF0_1fM=d8vkLw@mail.gmail.com>
On Mon, Feb 17, 2014 at 09:00:20AM +0100, Raphaël Poggi wrote:
> Ok I will do this today.�
> By the way, can you tell me how I can reply to this thread using git
> send-email to submit patch ? Like that I don't have to open a new thread
> in the mailing list.�
> I am a beginner in open source community and my question can sound stupid
> for you...
> Thanks
> Rapha
You can do this by adding --in-reply-to <msg-id> to the git send-email
commandline. Anyway, I prefer new versions of patches to be sent as a
new thread, possibly adding a [PATCH v2] prefix. When a thread contains
multiple versions of the same patch it's often hard to find the most
recent patches when it comes to applying them.
Since you are new to open source community, the most important rule is:
Don't give up when people are nagging about small details of your patch.
At least this means people are looking at your stuff ;)
Sascha
>
> �014-02-17 8:48 GMT+01:00 Sascha Hauer <[1]s.hauer@pengutronix.de>:
>
> Hi Rapha�l,
> On Sun, Feb 16, 2014 at 02:20:08PM -0800, Rapha�l POGGI wrote:
> > From: Raphael Poggi <[2]poggi.raph@gmail.com>
> >
> > For more information about the board: [3]http://www.udoo.org/
> >
> > Signed-off-by: Raphael Poggi <[4]poggi.raph@gmail.com>
>
> Your patch contains several coding style issues, most significantly:
> Please use tabs for indendation, not spaces. You should run
> scripts/[5]checkpatch.pl over your patch next time, it catches most of
> the issues.
> Otherwise your patch looks fine and I applied it after fixing the coding
> style.
>
> Thanks
> �Sascha
> > ---
> > �arch/arm/boards/Makefile � � � � � � � � � � � � �| � 1 +
> > �arch/arm/boards/udoo/Makefile � � � � � � � � � � | � 3 +
> > �arch/arm/boards/udoo/board.c � � � � � � � � � � �| 204
> ++++++++++++++++++++++
> > �arch/arm/boards/udoo/env/config-board � � � � � � | � 6 +
> > �arch/arm/boards/udoo/flash-header-mx6-udoo.imxcfg | 104 +++++++++++
> > �arch/arm/boards/udoo/lowlevel.c � � � � � � � � � | �17 ++
> > �arch/arm/configs/imx_v7_defconfig � � � � � � � � | � 1 +
> > �arch/arm/dts/Makefile � � � � � � � � � � � � � � | � 4 +-
> > �arch/arm/dts/imx6q-udoo.dts � � � � � � � � � � � | �23 +++
> > �arch/arm/dts/imx6qdl-udoo.dtsi � � � � � � � � � �| 108 ++++++++++++
> > �arch/arm/mach-imx/Kconfig � � � � � � � � � � � � | � 5 +
> > �images/Makefile.imx � � � � � � � � � � � � � � � | � 5 +
> > �12 files changed, 480 insertions(+), 1 deletion(-)
> > �create mode 100644 arch/arm/boards/udoo/Makefile
> > �create mode 100644 arch/arm/boards/udoo/board.c
> > �create mode 100644 arch/arm/boards/udoo/env/config-board
> > �create mode 100644 arch/arm/boards/udoo/flash-header-mx6-udoo.imxcfg
> > �create mode 100644 arch/arm/boards/udoo/lowlevel.c
> > �create mode 100644 arch/arm/dts/imx6q-udoo.dts
> > �create mode 100644 arch/arm/dts/imx6qdl-udoo.dtsi
> >
> > diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> > index befddd0..a45adee 100644
> > --- a/arch/arm/boards/Makefile
> > +++ b/arch/arm/boards/Makefile
> > @@ -91,6 +91,7 @@ obj-$(CONFIG_MACH_TX25) � � � � � � � � � � � � � �
> += karo-tx25/
> > �obj-$(CONFIG_MACH_TX28) � � � � � � � � � � � � � � �+= karo-tx28/
> > �obj-$(CONFIG_MACH_TX51) � � � � � � � � � � � � � � �+= karo-tx51/
> > �obj-$(CONFIG_MACH_TX53) � � � � � � � � � � � � � � �+= karo-tx53/
> > +obj-$(CONFIG_MACH_UDOO) � � � � � � += udoo/
> > �obj-$(CONFIG_MACH_USB_A9260) � � � � � � � � += usb-a926x/
> > �obj-$(CONFIG_MACH_USB_A9263) � � � � � � � � += usb-a926x/
> > �obj-$(CONFIG_MACH_USB_A9G20) � � � � � � � � += usb-a926x/
> > diff --git a/arch/arm/boards/udoo/Makefile
> b/arch/arm/boards/udoo/Makefile
> > new file mode 100644
> > index 0000000..ae17789
> > --- /dev/null
> > +++ b/arch/arm/boards/udoo/Makefile
> > @@ -0,0 +1,3 @@
> > +obj-y += board.o flash-header-mx6-udoo.dcd.o
> > +extra-y += flash-header-mx6-udoo.dcd.S flash-header-mx6-udoo.dcd
> > +lwl-y += lowlevel.o
> > diff --git a/arch/arm/boards/udoo/board.c
> b/arch/arm/boards/udoo/board.c
> > new file mode 100644
> > index 0000000..8302609
> > --- /dev/null
> > +++ b/arch/arm/boards/udoo/board.c
> > @@ -0,0 +1,204 @@
> > +/*
> > + * Copyright (C) 2014 Rapha�l Poggi
> > + * Copyright (C) 2012 Steffen Trumtrar, Pengutronix
> > + *
> > + * based on arch/arm/boards/freescale-mx6-arm2/board.c
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. �See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <common.h>
> > +#include <init.h>
> > +#include <environment.h>
> > +#include <mach/imx6-regs.h>
> > +#include <fec.h>
> > +#include <gpio.h>
> > +#include <mach/bbu.h>
> > +#include <asm/armlinux.h>
> > +#include <generated/mach-types.h>
> > +#include <partition.h>
> > +#include <linux/phy.h>
> > +#include <asm/io.h>
> > +#include <asm/mmu.h>
> > +#include <mach/generic.h>
> > +#include <sizes.h>
> > +#include <net.h>
> > +#include <linux/micrel_phy.h>
> > +#include <mach/imx6.h>
> > +#include <mach/devices-imx6.h>
> > +#include <mach/iomux-mx6.h>
> > +#include <spi/spi.h>
> > +#include <mach/spi.h>
> > +#include <mach/usb.h>
> > +
> > +static iomux_v3_cfg_t udoo_enet_gpio_pads_1[] = {
> > + � � � MX6Q_PAD_ENET_MDIO__ENET_MDIO � � � � � |
> MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
> > + � � � MX6Q_PAD_ENET_MDC__ENET_MDC � � � � � � � � � � |
> MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
> > + � � � MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC � � �|
> MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
> > + � � � MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 � � �|
> MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
> > + � � � MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 � � �|
> MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
> > + � � � MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 � � �|
> MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
> > + � � � MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 � � �|
> MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
> > + � � � MX6Q_PAD_RGMII_TX_CTL__ENET_RGMII_TX_CTL � � � �|
> MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
> > + � � � MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK � � �|
> MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
> > + � � � MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC � � �|
> MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
> > + � � � /* RGMII reset */
> > + � � � /* alimentazione ethernet*/
> > + � � � MX6Q_PAD_EIM_EB3__GPIO_2_31 � � � � � � |
> MUX_PAD_CTRL(NO_PAD_CTRL),
> > + � � � /* pin 32 - 1 - (MODE0) all */
> > + � � � MX6Q_PAD_RGMII_RD0__GPIO_6_25 � | MUX_PAD_CTRL(NO_PAD_CTRL),
> > + � � � /* pin 31 - 1 - (MODE1) all */
> > + � � � MX6Q_PAD_RGMII_RD1__GPIO_6_27 � | MUX_PAD_CTRL(NO_PAD_CTRL),
> > + � � � /* pin 28 - 1 - (MODE2) all */
> > + � � � MX6Q_PAD_RGMII_RD2__GPIO_6_28 � | MUX_PAD_CTRL(NO_PAD_CTRL),
> > + � � � /* pin 27 - 1 - (MODE3) all */
> > + � � � MX6Q_PAD_RGMII_RD3__GPIO_6_29 � | MUX_PAD_CTRL(NO_PAD_CTRL),
> > + � � � /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
> > +};
> > +
> > +static iomux_v3_cfg_t udoo_enet_gpio_pads_2[] = {
> > + � � � /* Ethernet */
> > + � � � MX6Q_PAD_RGMII_RXC__GPIO_6_30, � � � � �/* PHYAD */
> > + � � � MX6Q_PAD_RGMII_RD0__GPIO_6_25, � � � � �/* MODE0 */
> > + � � � MX6Q_PAD_RGMII_RD1__GPIO_6_27, � � � � �/* MODE1 */
> > + � � � MX6Q_PAD_RGMII_RD2__GPIO_6_28, � � � � �/* MODE2 */
> > + � � � MX6Q_PAD_RGMII_RD3__GPIO_6_29, � � � � �/* MODE3 */
> > + � � � MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24,
> > +};
> > +
> > +static int ksz9021rn_phy_fixup(struct phy_device *dev)
> > +{
> > +
> > + � � � phy_write(dev, 0x09, 0x1c00);
> > + � � � phy_write(dev, 0x4, 0x0000);
> > + � � � phy_write(dev, 0x5, 0x0000);
> > + � � � phy_write(dev, 0x6, 0x0000);
> > + � � � phy_write(dev, 0x8, 0x03ff);
> > +
> > + � � � /* do same as linux kernel */
> > + � � � /* min rx data delay */
> > + � � � phy_write(dev, 0x0b, 0x8105);
> > + � � � phy_write(dev, 0x0c, 0x0000);
> > +
> > + � � � /* max rx/tx clock delay, min rx/tx control delay */
> > + � � � phy_write(dev, 0x0b, 0x8104);
> > + � � � phy_write(dev, 0x0c, 0xf0f0);
> > + � � � phy_write(dev, 0x0b, 0x104);
> > +
> > + � � � return 0;
> > +}
> > +
> > +static int udoo_ksz9021rn_setup(void)
> > +{
> > + � � � mxc_iomux_v3_setup_multiple_pads(udoo_enet_gpio_pads_1,
> > + � � � � � � � � � � � ARRAY_SIZE(udoo_enet_gpio_pads_1));
> > +
> > + � � � gpio_direction_output( IMX_GPIO_NR( 2 , 31 ) , 1 ); /* Power
> on enet */
> > +
> > + � � � /* MODE strap-in pins: advertise all capabilities */
> > + � � � gpio_direction_output(185, 1); /* GPIO 6-25 */
> > + � � � gpio_direction_output(187, 1); /* GPIO 6-27 */
> > + � � � gpio_direction_output(188, 1); /* GPIO 6-28*/
> > + � � � gpio_direction_output(189, 1); /* GPIO 6-29 */
> > +
> > + � � � mdelay(10);
> > +
> > + � � � /* Enable 125 MHz clock output */
> > + � � � �gpio_direction_output(184, 1); /* GPIO 6-24 */
> > +
> > + � � � mdelay( 100 );
> > +
> > + � � � gpio_free(IMX_GPIO_NR(6, 24));
> > + � � � gpio_free(IMX_GPIO_NR(6, 25));
> > + � � � gpio_free(IMX_GPIO_NR(6, 27));
> > + � � � gpio_free(IMX_GPIO_NR(6, 28));
> > + � � � gpio_free(IMX_GPIO_NR(6, 29));
> > +
> > + � � � mxc_iomux_v3_setup_multiple_pads(udoo_enet_gpio_pads_2,
> ARRAY_SIZE(udoo_enet_gpio_pads_2));
> > +
> > + � � � return 0;
> > +}
> > +/*
> > + * Do this before the fec initializes but after our
> > + * gpios are available.
> > + */
> > +fs_initcall(udoo_ksz9021rn_setup);
> > +
> > +static void udoo_ehci_init(void)
> > +{
> > + � � � /* hub reset */
> > + � � � gpio_direction_output(204, 0);
> > + � � � udelay(2000);
> > + � � � gpio_set_value(204, 1);
> > +}
> > +
> > +static iomux_v3_cfg_t const wdog_pads[] = {
> > + � � � MX6Q_PAD_EIM_A24__GPIO_5_4 | MUX_PAD_CTRL(NO_PAD_CTRL),
> > + � � � MX6Q_PAD_EIM_D19__EPIT1_EPITO,
> > +};
> > +
> > +#define WDT_EN � � �IMX_GPIO_NR(5, 4)
> > +#define WDT_TRG � � IMX_GPIO_NR(3, 19)
> > +static void setup_iomux_wdog(void)
> > +{
> > + � � � mxc_iomux_v3_setup_multiple_pads(wdog_pads,
> ARRAY_SIZE(wdog_pads));
> > + � � � gpio_direction_output(WDT_TRG, 0);
> > + � � � gpio_direction_output(WDT_EN, 1);
> > + � � � gpio_direction_input(WDT_TRG);
> > +}
> > +
> > +static void udoo_epit_init( void )
> > +{
> > +
> > + � � � writel(0x0000000, 0x20D0000);
> > + � � � writel(0x142000F, 0x20D0000);
> > + � � � writel(0x10000, 0x20D0008);
> > + � � � writel(0x0, 0x20D000C);
> > +}
> > +
> > +static int udoo_devices_init(void)
> > +{
> > + � � � if (!of_machine_is_compatible("fsl,imx6q-udoo"))
> > + � � � � � � � return 0;
> > +
> > + � � � setup_iomux_wdog();
> > + � � � udoo_ehci_init();
> > + � � � udoo_epit_init();
> > +
> > + � � � armlinux_set_bootparams((void *)0x10000100);
> > +
> > + � � � return 0;
> > +}
> > +device_initcall(udoo_devices_init);
> > +
> > +static int udoo_coredevices_init(void)
> > +{
> > + � � � if (!of_machine_is_compatible("fsl,imx6q-udoo"))
> > + � � � � � � � return 0;
> > +
> > + � � � phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
> > + � � � � � � � � � � � � � � � � � � � � �ksz9021rn_phy_fixup);
> > + � � � return 0;
> > +}
> > +coredevice_initcall(udoo_coredevices_init);
> > +
> > +static int udoo_postcore_init(void)
> > +{
> > + � � � if (!of_machine_is_compatible("fsl,imx6q-udoo"))
> > + � � � � � � � return 0;
> > +
> > + � � � imx6_init_lowlevel();
> > +
> > + � � � barebox_set_hostname("udoo");
> > +
> > + � � � return 0;
> > +}
> > +postcore_initcall(udoo_postcore_init);
> > diff --git a/arch/arm/boards/udoo/env/config-board
> b/arch/arm/boards/udoo/env/config-board
> > new file mode 100644
> > index 0000000..4cabac6
> > --- /dev/null
> > +++ b/arch/arm/boards/udoo/env/config-board
> > @@ -0,0 +1,6 @@
> > +#!/bin/sh
> > +
> > +# board defaults, do not change in running system. Change /env/config
> > +# instead
> > +
> > +global.linux.bootargs.base="console=ttymxc1,115200"
> > diff --git a/arch/arm/boards/udoo/flash-header-mx6-udoo.imxcfg
> b/arch/arm/boards/udoo/flash-header-mx6-udoo.imxcfg
> > new file mode 100644
> > index 0000000..b142f59
> > --- /dev/null
> > +++ b/arch/arm/boards/udoo/flash-header-mx6-udoo.imxcfg
> > @@ -0,0 +1,104 @@
> > +soc imx6
> > +loadaddr 0x20000000
> > +dcdofs 0x400
> > +
> > +
> > +/* MX6_IOM_DRAM_SDQS0 -> MX6_IOM_DRAM_SDQS7 */
> > +wm 32 0x020e05a8 0x00000030
> > +wm 32 0x020e05b0 0x00000030
> > +wm 32 0x020e0524 0x00000030
> > +wm 32 0x020e051c 0x00000030
> > +wm 32 0x020e0518 0x00000030
> > +wm 32 0x020e050c 0x00000030
> > +wm 32 0x020e05b8 0x00000030
> > +wm 32 0x020e05c0 0x00000030
> > +/********************************************/
> > +
> > +/* MX6_IOM_DRAM_DQM0 -> MX6_IOM_DRAM_DQM7 */
> > +wm 32 0x020e05ac 0x00020030
> > +wm 32 0x020e05b4 0x00020030
> > +wm 32 0x020e0528 0x00020030
> > +wm 32 0x020e0520 0x00020030
> > +wm 32 0x020e0514 0x00020030
> > +wm 32 0x020e0510 0x00020030
> > +wm 32 0x020e05bc 0x00020030
> > +wm 32 0x020e05c4 0x00020030
> > +/******************************************/
> > +
> > +wm 32 0x020e056c 0x00020030 /* MX6_IOM_DRAM_CAS */
> > +wm 32 0x020e0578 0x00020030 /* MX6_IOM_DRAM_RAS */
> > +wm 32 0x020e0588 0x00020030 /* MX6_IOM_DRAM_SDCLK_0 */
> > +wm 32 0x020e0594 0x00020030 � �/* MX6_IOM_DRAM_SDCLK_1 */
> > +wm 32 0x020e057c 0x00020030 /* MX6_IOM_DRAM_RESET */
> > +wm 32 0x020e0590 0x00003000
> > +wm 32 0x020e0598 0x00003000
> > +wm 32 0x020e058c 0x00000000
> > +wm 32 0x020e059c 0x00003030
> > +wm 32 0x020e05a0 0x00003030
> > +
> > +/* MX6_IOM_GRP_B0DS -> MX6_IOM_GRP_B7DS */
> > +wm 32 0x020e0784 0x00000030
> > +wm 32 0x020e0788 0x00000030
> > +wm 32 0x020e0794 0x00000030
> > +wm 32 0x020e079c 0x00000030
> > +wm 32 0x020e07a0 0x00000030
> > +wm 32 0x020e07a4 0x00000030
> > +wm 32 0x020e07a8 0x00000030
> > +wm 32 0x020e0748 0x00000030
> > +/***************************************/
> > +
> > +wm 32 0x020e074c 0x00000030 /* MX6_IOM_GRP_ADDDS */
> > +wm 32 0x020e0750 0x00020000
> > +wm 32 0x020e0758 0x00000000
> > +wm 32 0x020e0774 0x00020000
> > +wm 32 0x020e078c 0x00000030 /* MX6_IOM_GRP_CTLDS */
> > +wm 32 0x020e0798 0x000c0000
> > +wm 32 0x021b081c 0x33333333
> > +wm 32 0x021b0820 0x33333333
> > +wm 32 0x021b0824 0x33333333
> > +wm 32 0x021b0828 0x33333333
> > +wm 32 0x021b481c 0x33333333
> > +wm 32 0x021b4820 0x33333333
> > +wm 32 0x021b4824 0x33333333
> > +wm 32 0x021b4828 0x33333333
> > +
> > +
> > +wm 32 0x021b0004 0x00020036
> > +wm 32 0x021b0008 0x09444040
> > +wm 32 0x021b000c 0x54597955
> > +wm 32 0x021b0010 0xFF328F64
> > +wm 32 0x021b0014 0x01FF00DB
> > +wm 32 0x021b0018 0x00001740
> > +wm 32 0x021b001c 0x00008000
> > +wm 32 0x021b002c 0x000026D2
> > +wm 32 0x021b0030 0x00591023
> > +wm 32 0x021b0040 0x00000027
> > +wm 32 0x021b0000 0x831A0000
> > +wm 32 0x021b001c 0x04088032
> > +wm 32 0x021b001c 0x00008033
> > +wm 32 0x021b001c 0x00048031
> > +wm 32 0x021b001c 0x09408030
> > +wm 32 0x021b001c 0x04008040
> > +wm 32 0x021b0800 0xA1380003
> > +wm 32 0x021b4800 0xA1380003
> > +wm 32 0x021b0020 0x00005800
> > +wm 32 0x021b0818 0x00011117
> > +wm 32 0x021b4818 0x00011117
> > +wm 32 0x021b083c 0x43510360
> > +wm 32 0x021b0840 0x0342033F
> > +wm 32 0x021b483c 0x033F033F
> > +wm 32 0x021b4840 0x03290266
> > +wm 32 0x021b0848 0x4B3E4141
> > +wm 32 0x021b4848 0x47413B4A
> > +wm 32 0x021b0850 0x42404843
> > +wm 32 0x021b4850 0x4C3F4C45
> > +wm 32 0x021b080c 0x00350035
> > +wm 32 0x021b0810 0x001F001F
> > +wm 32 0x021b480c 0x00010001
> > +wm 32 0x021b4810 0x00010001
> > +wm 32 0x021b08b8 0x00000800
> > +wm 32 0x021b48b8 0x00000800
> > +wm 32 0x021b0004 0x00025576
> > +wm 32 0x021b0404 0x00011006
> > +wm 32 0x021b001c 0x00000000
> > +
> > diff --git a/arch/arm/boards/udoo/lowlevel.c
> b/arch/arm/boards/udoo/lowlevel.c
> > new file mode 100644
> > index 0000000..68b261d
> > --- /dev/null
> > +++ b/arch/arm/boards/udoo/lowlevel.c
> > @@ -0,0 +1,17 @@
> > +#include <common.h>
> > +#include <sizes.h>
> > +#include <asm/barebox-arm-head.h>
> > +#include <asm/barebox-arm.h>
> > +
> > +extern char __dtb_imx6q_udoo_start[];
> > +
> > +ENTRY_FUNCTION(start_imx6_udoo, r0, r1, r2)
> > +{
> > + � � � uint32_t fdt;
> > +
> > + � � � arm_cpu_lowlevel_init();
> > +
> > + � � � fdt = (uint32_t)__dtb_imx6q_udoo_start - get_runtime_offset();
> > +
> > + � � � barebox_arm_entry(0x10000000, SZ_1G, fdt);
> > +}
> > diff --git a/arch/arm/configs/imx_v7_defconfig
> b/arch/arm/configs/imx_v7_defconfig
> > index 0f8b3ef..9634615 100644
> > --- a/arch/arm/configs/imx_v7_defconfig
> > +++ b/arch/arm/configs/imx_v7_defconfig
> > @@ -13,6 +13,7 @@ CONFIG_MACH_TQMA6X=y
> > �CONFIG_MACH_SABRELITE=y
> > �CONFIG_MACH_NITROGEN6X=y
> > �CONFIG_MACH_SOLIDRUN_HUMMINGBOARD=y
> > +CONFIG_MACH_UDOO=y
> > �CONFIG_IMX_IIM=y
> > �CONFIG_IMX_IIM_FUSE_BLOW=y
> > �CONFIG_IMX_OCOTP=y
> > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > index 07508e3..45b4b54 100644
> > --- a/arch/arm/dts/Makefile
> > +++ b/arch/arm/dts/Makefile
> > @@ -23,7 +23,8 @@ dtb-$(CONFIG_ARCH_IMX6) += imx6q-gk802.dtb \
> > � � � imx6q-phytec-pbab01.dtb \
> > � � � imx6dl-hummingboard.dtb \
> > � � � imx6q-nitrogen6x.dtb \
> > - � � imx6dl-nitrogen6x.dtb
> > + � � imx6dl-nitrogen6x.dtb \
> > + � �imx6q-udoo.dtb
> > �dtb-$(CONFIG_ARCH_MVEBU) += dove-cubox.dtb
> > �dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5_sockit.dtb \
> > � � � socfpga_cyclone5_socrates.dtb
> > @@ -55,6 +56,7 @@ pbl-$(CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT) +=
> socfpga_cyclone5_sockit.dtb.o
> > �pbl-$(CONFIG_MACH_SOLIDRUN_HUMMINGBOARD) += imx6dl-hummingboard.dtb.o
> > �pbl-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o
> imx6dl-sabrelite.dtb.o
> > �pbl-$(CONFIG_MACH_NITROGEN6X) += imx6q-nitrogen6x.dtb.o
> imx6dl-nitrogen6x.dtb.o
> > +pbl-$(CONFIG_MACH_UDOO) += imx6q-udoo.dtb.o
> >
> > �.SECONDARY: $(obj)/$(BUILTIN_DTB).dtb.S
> > �.SECONDARY: $(patsubst %,$(obj)/%.S,$(dtb-y))
> > diff --git a/arch/arm/dts/imx6q-udoo.dts b/arch/arm/dts/imx6q-udoo.dts
> > new file mode 100644
> > index 0000000..a74048f
> > --- /dev/null
> > +++ b/arch/arm/dts/imx6q-udoo.dts
> > @@ -0,0 +1,23 @@
> > +/*
> > + * Copyright 2014 Rapha�l Poggi
> > + * Copyright 2012 Freescale Semiconductor, Inc.
> > + * Copyright 2011 Linaro Ltd.
> > + *
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
> > + * Version 2 or later at the following locations:
> > + *
> > + * [6]http://www.opensource.org/licenses/gpl-license.html
> > + * [7]http://www.gnu.org/copyleft/gpl.html
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "imx6q.dtsi"
> > +#include "imx6qdl-udoo.dtsi"
> > +
> > +/ {
> > + � � � model = "Freescale i.MX6 Quad UDOO Board";
> > + � � � compatible = "fsl,imx6q-udoo", "fsl,imx6q";
> > +};
> > +
> > diff --git a/arch/arm/dts/imx6qdl-udoo.dtsi
> b/arch/arm/dts/imx6qdl-udoo.dtsi
> > new file mode 100644
> > index 0000000..c705684
> > --- /dev/null
> > +++ b/arch/arm/dts/imx6qdl-udoo.dtsi
> > @@ -0,0 +1,108 @@
> > +/*
> > + * Copyright 2014 Rapha�l Poggi
> > + * Copyright 2011 Freescale Semiconductor, Inc.
> > + * Copyright 2011 Linaro Ltd.
> > + *
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
> > + * Version 2 or later at the following locations:
> > + *
> > + * [8]http://www.opensource.org/licenses/gpl-license.html
> > + * [9]http://www.gnu.org/copyleft/gpl.html
> > + */
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/input/input.h>
> > +
> > +/ {
> > + � � � chosen {
> > + � � � � � � � linux,stdout-path = &uart2;
> > +
> > + � � � };
> > +
> > + � � � memory {
> > + � � � � � � � reg = <0x10000000 0x40000000>;
> > + � � � };
> > +
> > + � � � regulators {
> > + � � � � � � � compatible = "simple-bus";
> > + � � � � � � � #address-cells = <1>;
> > + � � � � � � � #size-cells = <0>;
> > +
> > + � � � � � � � reg_2p5v: regulator@0 {
> > + � � � � � � � � � � � compatible = "regulator-fixed";
> > + � � � � � � � � � � � reg = <0>;
> > + � � � � � � � � � � � regulator-name = "2P5V";
> > + � � � � � � � � � � � regulator-min-microvolt = <2500000>;
> > + � � � � � � � � � � � regulator-max-microvolt = <2500000>;
> > + � � � � � � � � � � � regulator-always-on;
> > + � � � � � � � };
> > +
> > + � � � � � � � reg_3p3v: regulator@1 {
> > + � � � � � � � � � � � compatible = "regulator-fixed";
> > + � � � � � � � � � � � reg = <1>;
> > + � � � � � � � � � � � regulator-name = "3P3V";
> > + � � � � � � � � � � � regulator-min-microvolt = <3300000>;
> > + � � � � � � � � � � � regulator-max-microvolt = <3300000>;
> > + � � � � � � � � � � � regulator-always-on;
> > + � � � � � � � };
> > +
> > + � � � � � � � reg_usb_otg_vbus: regulator@2 {
> > + � � � � � � � � � � � compatible = "regulator-fixed";
> > + � � � � � � � � � � � reg = <2>;
> > + � � � � � � � � � � � regulator-name = "usb_otg_vbus";
> > + � � � � � � � � � � � regulator-min-microvolt = <5000000>;
> > + � � � � � � � � � � � regulator-max-microvolt = <5000000>;
> > + � � � � � � � � � � � gpio = <&gpio3 22 0>;
> > + � � � � � � � � � � � enable-active-high;
> > + � � � � � � � };
> > + � � � };
> > +};
> > +
> > +&i2c1 {
> > + � � � clock-frequency = <100000>;
> > + � � � pinctrl-names = "default";
> > + � � � pinctrl-0 = <&pinctrl_i2c1>;
> > + � � � status = "okay";
> > +
> > +};
> > +
> > +&iomuxc {
> > + � � � pinctrl-names = "default";
> > + � � � pinctrl-0 = <&pinctrl_hog>;
> > +
> > + � � � imx6q-udoo {
> > + � � � � � � � pinctrl_hog: hoggrp {
> > + � � � � � � � � � � � fsl,pins = <
> > + � � � � � � � � � � � � � � � /* SGTL5000 sys_mclk */
> > + � � � � � � � � � � � � � � � MX6QDL_PAD_GPIO_0__CCM_CLKO1 �
> �0x030b0
> > + � � � � � � � � � � � >;
> > + � � � � � � � };
> > +
> > + � � � � � � � pinctrl_i2c1: i2c1grp {
> > + � � � � � � � � � � � fsl,pins = <MX6QDL_I2C1_PINGRP1>;
> > + � � � � � � � };
> > +
> > + � � � � � � � pinctrl_uart2: uart2grp {
> > + � � � � � � � � � � � fsl,pins = <MX6QDL_UART2_PINGRP1>;
> > + � � � � � � � };
> > +
> > + � � � � � � � pinctrl_usdhc3: usdhc3grp {
> > + � � � � � � � � � � � fsl,pins = <
> > + � � � � � � � � � � � � � � � MX6QDL_USDHC3_PINGRP_D4
> > + � � � � � � � � � � � >;
> > + � � � � � � � };
> > +
> > + � � � };
> > +};
> > +
> > +&uart2 {
> > + � � � pinctrl-names = "default";
> > + � � � pinctrl-0 = <&pinctrl_uart2>;
> > + � � � status = "okay";
> > +};
> > +
> > +&usdhc3 {
> > + � � � pinctrl-names = "default";
> > + � � � pinctrl-0 = <&pinctrl_usdhc3>;
> > + � � � status = "okay";
> > +};
> > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> > index 5933f81..28d1990 100644
> > --- a/arch/arm/mach-imx/Kconfig
> > +++ b/arch/arm/mach-imx/Kconfig
> > @@ -37,6 +37,7 @@ config ARCH_TEXT_BASE
> > � � � default 0x2fc00000 if MACH_TQMA6X
> > � � � default 0x4fc00000 if MACH_PHYTEC_PFLA02
> > � � � default 0x4fc00000 if MACH_DFI_FS700_M60
> > + � �default 0x4fc00000 if MACH_UDOO
> >
> > �config ARCH_IMX_INTERNAL_BOOT
> > � � � bool "support internal boot mode"
> > @@ -233,6 +234,10 @@ config MACH_SOLIDRUN_HUMMINGBOARD
> > � � � bool "SolidRun Hummingboard"
> > � � � select ARCH_IMX6
> >
> > +config MACH_UDOO
> > + � � bool "Freescale i.MX6 UDOO Board"
> > + � � select ARCH_IMX6
> > +
> > �endif
> >
> > �# ----------------------------------------------------------
> > diff --git a/images/Makefile.imx b/images/Makefile.imx
> > index 9aca871..e3b27b7 100644
> > --- a/images/Makefile.imx
> > +++ b/images/Makefile.imx
> > @@ -123,3 +123,8 @@ pblx-$(CONFIG_MACH_NITROGEN6X) +=
> start_imx6dl_nitrogen6x_1g
> > �CFG_start_imx6dl_nitrogen6x_1g.pblx.imximg =
> $(board)/boundarydevices-nitrogen6x/flash-header-nitrogen6x-1g.imxcfg
> > �FILE_barebox-boundarydevices-imx6dl-nitrogen6x-1g.img =
> start_imx6dl_nitrogen6x_1g.pblx.imximg
> > �image-$(CONFIG_MACH_NITROGEN6X) +=
> barebox-boundarydevices-imx6dl-nitrogen6x-1g.img
> > +
> > +pblx-$(CONFIG_MACH_UDOO) += start_imx6_udoo
> > +CFG_start_imx6_udoo.pblx.imximg =
> $(board)/udoo/flash-header-mx6-udoo.imxcfg
> > +FILE_barebox-freescale-imx6q-udoo.img = start_imx6_udoo.pblx.imximg
> > +image-$(CONFIG_MACH_UDOO) += barebox-freescale-imx6q-udoo.img
> > --
> > 1.8.3.2
> >
> >
> > _______________________________________________
> > barebox mailing list
> > [10]barebox@lists.infradead.org
> > [11]http://lists.infradead.org/mailman/listinfo/barebox
>
> --
> Pengutronix e.K. � � � � � � � � � � � � � | � � � � � � � � � � � � � �
> |
> Industrial Linux Solutions � � � � � � � � |
> [12]http://www.pengutronix.de/ �|
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone:
> [13]+49-5121-206917-0 � �|
> Amtsgericht Hildesheim, HRA 2686 � � � � � | Fax: �
> [14]+49-5121-206917-5555 |
> _______________________________________________
> barebox mailing list
> [15]barebox@lists.infradead.org
> [16]http://lists.infradead.org/mailman/listinfo/barebox
>
> References
>
> Visible links
> 1. mailto:s.hauer@pengutronix.de
> 2. mailto:poggi.raph@gmail.com
> 3. http://www.udoo.org/
> 4. mailto:poggi.raph@gmail.com
> 5. http://checkpatch.pl/
> 6. http://www.opensource.org/licenses/gpl-license.html
> 7. http://www.gnu.org/copyleft/gpl.html
> 8. http://www.opensource.org/licenses/gpl-license.html
> 9. http://www.gnu.org/copyleft/gpl.html
> 10. mailto:barebox@lists.infradead.org
> 11. http://lists.infradead.org/mailman/listinfo/barebox
> 12. http://www.pengutronix.de/
> 13. file:///dev/tel:%2B49-5121-206917-0
> 14. file:///dev/tel:%2B49-5121-206917-5555
> 15. mailto:barebox@lists.infradead.org
> 16. http://lists.infradead.org/mailman/listinfo/barebox
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2014-02-17 8:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-16 22:20 Raphaël POGGI
2014-02-17 7:48 ` Sascha Hauer
2014-02-17 8:08 ` Alexander Shiyan
[not found] ` <CACqcpZDbp2r8z0R4AjEwwkGkJ4+aBi6LcKjBWKyaa-36N+NaCg@mail.gmail.com>
2014-02-17 18:54 ` Alexander Shiyan
2014-02-17 19:34 ` Raphaël Poggi
[not found] ` <CACqcpZDwF=weDsC-+jw97+V4Rw33xMLXUrt3OF0_1fM=d8vkLw@mail.gmail.com>
2014-02-17 8:25 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140217082519.GN17250@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=raphio98@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox