mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Cc: Grigory Milev <g.milev@sam-solutions.com>, barebox@lists.infradead.org
Subject: Re: [PATCH 1/5] mtd: Update internal API to support 64-bit device size
Date: Wed, 12 Mar 2014 21:28:48 +0100	[thread overview]
Message-ID: <20140312202848.GL17250@pengutronix.de> (raw)
In-Reply-To: <1394451593-3090-1-git-send-email-d.lavnikevich@sam-solutions.com>

On Mon, Mar 10, 2014 at 02:39:49PM +0300, Dmitry Lavnikevich wrote:
> MTD internal API presently uses 32-bit values to represent device
> size. This patch updates them to 64-bits but leaves the external API
> unchanged.
> 
> In general, changing from 32-bit to 64-bit values cause little
> or no changes to the majority of the code with the following
> exceptions:
>   - printk message formats;
>   - division and modulus of 64-bit values (mtd_div_by_wb,
>     mtd_div_by_eb may be used in some of such cases).
> 
> Was tested on phyFLEX i.MX6.
>

changed master_offset to 64bit aswell and applied this series.

Thanks
 Sascha
 
> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
> Signed-off-by: Grigory Milev <g.milev@sam-solutions.com>
> ---
>  commands/nandtest.c                 |  2 +-
>  commands/partition.c                | 11 ++++++-----
>  drivers/mtd/core.c                  |  2 +-
>  drivers/mtd/devices/m25p80.c        |  5 +++--
>  drivers/mtd/devices/mtd_dataflash.c |  2 +-
>  drivers/mtd/mtdoob.c                |  2 +-
>  drivers/mtd/mtdraw.c                |  2 +-
>  include/linux/mtd/mtd-abi.h         | 12 +++++++++++-
>  include/linux/mtd/mtd.h             |  9 ++++++++-
>  lib/libmtd.c                        | 10 +++++-----
>  10 files changed, 38 insertions(+), 19 deletions(-)
> 
> diff --git a/commands/nandtest.c b/commands/nandtest.c
> index 0da5444..c64f244 100644
> --- a/commands/nandtest.c
> +++ b/commands/nandtest.c
> @@ -277,7 +277,7 @@ static int do_nandtest(int argc, char *argv[])
>  	}
>  	if (length + flash_offset > meminfo.size) {
>  		printf("Length 0x%08llx + offset 0x%08llx exceeds "
> -				"device size 0x%08x\n", length,
> +				"device size 0x%08llx\n", length,
>  				flash_offset, meminfo.size);
>  		goto err;
>  	}
> diff --git a/commands/partition.c b/commands/partition.c
> index 6d37471..f825722 100644
> --- a/commands/partition.c
> +++ b/commands/partition.c
> @@ -42,10 +42,11 @@
>  #define PART_ADD_DEVNAME (1 << 0)
>  
>  static int mtd_part_do_parse_one(char *devname, const char *partstr,
> -				 char **endp, unsigned long *offset,
> -				 off_t devsize, size_t *retsize, unsigned int pflags)
> +				 char **endp, loff_t *offset,
> +				 loff_t devsize, size_t *retsize,
> +				 unsigned int pflags)
>  {
> -	ulong size;
> +	loff_t size;
>  	char *end;
>  	char buf[PATH_MAX] = {};
>  	unsigned long flags = 0;
> @@ -114,8 +115,8 @@ static int do_addpart(int argc, char *argv[])
>  {
>  	char *devname;
>  	char *endp;
> -	unsigned long offset = 0;
> -	off_t devsize;
> +	loff_t offset = 0;
> +	loff_t devsize;
>  	struct stat s;
>  	int opt;
>  	unsigned int flags = PART_ADD_DEVNAME;
> diff --git a/drivers/mtd/core.c b/drivers/mtd/core.c
> index 6db1c6d..7efb03c 100644
> --- a/drivers/mtd/core.c
> +++ b/drivers/mtd/core.c
> @@ -397,7 +397,7 @@ int add_mtd_device(struct mtd_info *mtd, char *devname, int device_id)
>  	mtd->cdev.mtd = mtd;
>  
>  	if (IS_ENABLED(CONFIG_PARAMETER)) {
> -		dev_add_param_int_ro(&mtd->class_dev, "size", mtd->size, "%u");
> +		dev_add_param_int_ro(&mtd->class_dev, "size", mtd->size, "%llu");
>  		dev_add_param_int_ro(&mtd->class_dev, "erasesize", mtd->erasesize, "%u");
>  		dev_add_param_int_ro(&mtd->class_dev, "writesize", mtd->oobsize, "%u");
>  		dev_add_param_int_ro(&mtd->class_dev, "oobsize", mtd->oobsize, "%u");
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index 9594011..757a717 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -273,8 +273,9 @@ static int erase_sector(struct m25p *flash, u32 offset, u32 command)
>  static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
>  {
>  	struct m25p *flash = mtd_to_m25p(mtd);
> -	u32 addr, len;
> +	u32 addr;
>  	uint32_t rem;
> +	uint64_t len;
>  
>  	dev_dbg(&flash->spi->dev, "%s at 0x%llx, len %lld\n",
>  			__func__, (long long)instr->addr,
> @@ -896,7 +897,7 @@ static int m25p_probe(struct device_d *dev)
>  	flash->mtd.type = MTD_NORFLASH;
>  	flash->mtd.writesize = 1;
>  	flash->mtd.flags = MTD_CAP_NORFLASH;
> -	flash->mtd.size = info->sector_size * info->n_sectors;
> +	flash->mtd.size = (uint64_t)info->sector_size * info->n_sectors;
>  	flash->mtd.erase = m25p80_erase;
>  	flash->mtd.read = m25p80_read;
>  
> diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
> index cdc0120..fa31b61 100644
> --- a/drivers/mtd/devices/mtd_dataflash.c
> +++ b/drivers/mtd/devices/mtd_dataflash.c
> @@ -625,7 +625,7 @@ add_dataflash_otp(struct spi_device *spi, char *name,
>  
>  	device = &priv->mtd;
>  	device->name = (pdata && pdata->name) ? pdata->name : "dataflash";
> -	device->size = nr_pages * pagesize;
> +	device->size = nr_pages * (uint64_t)pagesize;
>  	device->erasesize = pagesize;
>  	device->writesize = pagesize;
>  	device->type = MTD_DATAFLASH;
> diff --git a/drivers/mtd/mtdoob.c b/drivers/mtd/mtdoob.c
> index 1e88b53..54888cd 100644
> --- a/drivers/mtd/mtdoob.c
> +++ b/drivers/mtd/mtdoob.c
> @@ -78,7 +78,7 @@ static int add_mtdoob_device(struct mtd_info *mtd, char *devname, void **priv)
>  
>  	mtdoob = xzalloc(sizeof(*mtdoob));
>  	mtdoob->cdev.ops = &mtd_ops_oob;
> -	mtdoob->cdev.size = (mtd->size / mtd->writesize) * mtd->oobsize;
> +	mtdoob->cdev.size = mtd_div_by_wb(mtd->size, mtd) * mtd->oobsize;
>  	mtdoob->cdev.name = asprintf("%s_oob%d", devname, mtd->class_dev.id);
>  	mtdoob->cdev.priv = mtdoob;
>  	mtdoob->cdev.dev = &mtd->class_dev;
> diff --git a/drivers/mtd/mtdraw.c b/drivers/mtd/mtdraw.c
> index be34723..33ca05d 100644
> --- a/drivers/mtd/mtdraw.c
> +++ b/drivers/mtd/mtdraw.c
> @@ -290,7 +290,7 @@ static int add_mtdraw_device(struct mtd_info *mtd, char *devname, void **priv)
>  	mtdraw->mtd = mtd;
>  
>  	mtdraw->cdev.ops = (struct file_operations *)&mtd_raw_fops;
> -	mtdraw->cdev.size = mtd->size / mtd->writesize *
> +	mtdraw->cdev.size = mtd_div_by_wb(mtd->size, mtd) *
>  		(mtd->writesize + mtd->oobsize);
>  	mtdraw->cdev.name = asprintf("%s.raw", mtd->cdev.name);
>  	mtdraw->cdev.priv = mtdraw;
> diff --git a/include/linux/mtd/mtd-abi.h b/include/linux/mtd/mtd-abi.h
> index 11d51e2..c1ba55b 100644
> --- a/include/linux/mtd/mtd-abi.h
> +++ b/include/linux/mtd/mtd-abi.h
> @@ -9,6 +9,8 @@
>  
>  #ifndef DOXYGEN_SHOULD_SKIP_THIS
>  
> +#include <asm-generic/div64.h>
> +
>  struct erase_info_user {
>  	uint32_t start;
>  	uint32_t length;
> @@ -73,7 +75,7 @@ enum {
>  struct mtd_info_user {
>  	uint8_t type;
>  	uint32_t flags;
> -	uint32_t size;	 // Total size of the MTD
> +	uint64_t size;	 /* Total size of the MTD */
>  	uint32_t erasesize;
>  	uint32_t writesize;
>  	uint32_t oobsize;   // Amount of OOB data per block (e.g. 16)
> @@ -173,6 +175,14 @@ enum mtd_file_modes {
>  	MTD_MODE_RAW,
>  };
>  
> +
> +static inline uint32_t mtd_user_div_by_eb(uint64_t sz,
> +	struct mtd_info_user *mtd_user)
> +{
> +	do_div(sz, mtd_user->erasesize);
> +	return sz;
> +}
> +
>  #endif /* DOXYGEN_SHOULD_SKIP_THIS */
>  
>  #endif /* __MTD_ABI_H__ */
> diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
> index 402e497..d337455 100644
> --- a/include/linux/mtd/mtd.h
> +++ b/include/linux/mtd/mtd.h
> @@ -86,7 +86,7 @@ struct mtd_oob_ops {
>  struct mtd_info {
>  	u_char type;
>  	u_int32_t flags;
> -	u_int32_t size;	 // Total size of the MTD
> +	u_int64_t size;	 /* Total size of the MTD */
>  
>  	/* "Major" erase size for the device. Naïve users may take this
>  	 * to be the only erase size available, or may use the more detailed
> @@ -253,6 +253,13 @@ static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd)
>  {
>  	return do_div(sz, mtd->erasesize);
>  }
> +
> +static inline uint32_t mtd_div_by_wb(uint64_t sz, struct mtd_info *mtd)
> +{
> +	do_div(sz, mtd->writesize);
> +	return sz;
> +}
> +
>  	/* Kernel-side ioctl definitions */
>  
>  extern int add_mtd_device(struct mtd_info *mtd, char *devname, int device_id);
> diff --git a/lib/libmtd.c b/lib/libmtd.c
> index 1606b87..56672bd 100644
> --- a/lib/libmtd.c
> +++ b/lib/libmtd.c
> @@ -195,7 +195,7 @@ int libmtd_read(const struct mtd_dev_info *mtd, int fd, int eb, int offs,
>  	     void *buf, int len)
>  {
>  	int ret, rd = 0;
> -	off_t seek;
> +	loff_t seek;
>  
>  	ret = mtd_valid_erase_block(mtd, eb);
>  	if (ret)
> @@ -209,7 +209,7 @@ int libmtd_read(const struct mtd_dev_info *mtd, int fd, int eb, int offs,
>  	}
>  
>  	/* Seek to the beginning of the eraseblock */
> -	seek = (off_t)eb * mtd->eb_size + offs;
> +	seek = (loff_t)eb * mtd->eb_size + offs;
>  	if (lseek(fd, seek, SEEK_SET) != seek)
>  		return sys_errmsg("cannot seek %s to offset %llu",
>  				  mtd->node, (unsigned long long)seek);
> @@ -229,7 +229,7 @@ int libmtd_write(const struct mtd_dev_info *mtd, int fd, int eb, int offs,
>  	      void *buf, int len)
>  {
>  	int ret;
> -	off_t seek;
> +	loff_t seek;
>  
>  	ret = mtd_valid_erase_block(mtd, eb);
>  	if (ret)
> @@ -255,7 +255,7 @@ int libmtd_write(const struct mtd_dev_info *mtd, int fd, int eb, int offs,
>  	}
>  
>  	/* Seek to the beginning of the eraseblock */
> -	seek = (off_t)eb * mtd->eb_size + offs;
> +	seek = (loff_t)eb * mtd->eb_size + offs;
>  	if (lseek(fd, seek, SEEK_SET) != seek)
>  		return sys_errmsg("cannot seek %s to offset %llu",
>  				  mtd->node, (unsigned long long)seek);
> @@ -326,7 +326,7 @@ int mtd_get_dev_info(const char *node, struct mtd_dev_info *mtd)
>  		goto out_close;
>  	}
>  
> -	mtd->eb_cnt = ui.size / ui.erasesize;
> +	mtd->eb_cnt = mtd_user_div_by_eb(ui.size, &ui);
>  
>  	switch(mtd->type) {
>  	case MTD_ABSENT:
> -- 
> 1.9.0
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2014-03-12 20:29 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-10 11:39 Dmitry Lavnikevich
2014-03-10 11:39 ` [PATCH 2/5] mtd: Support for 4GB partitions Dmitry Lavnikevich
2014-03-10 11:39 ` [PATCH 3/5] ubi: Fix for creating ubi volumes with 64bit size Dmitry Lavnikevich
2014-03-10 11:39 ` [PATCH 4/5] nand: mxs: Check for up to 4 NAND chips Dmitry Lavnikevich
2014-03-10 11:39 ` [PATCH 5/5] nand: mxs: Fix for calculating ecc strength on some types of NAND flash Dmitry Lavnikevich
2014-03-12 20:28 ` Sascha Hauer [this message]
2014-03-12 20:51   ` [PATCH 1/5] mtd: Update internal API to support 64-bit device size Alexander Aring
2014-03-12 20:53     ` Sascha Hauer
  -- strict thread matches above, loose matches on Subject: below --
2014-03-07 11:14 Dmitry Lavnikevich
2014-03-10  7:20 ` Sascha Hauer
2014-03-10  8:02   ` Alexander Aring
2014-03-11  5:29     ` Sascha Hauer
2014-03-11  7:50       ` Alexander Aring
2014-03-12 20:28         ` Sascha Hauer
2014-03-10 11:37   ` Dmitry Lavnikevich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140312202848.GL17250@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=d.lavnikevich@sam-solutions.com \
    --cc=g.milev@sam-solutions.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox