From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WNq7D-0003mu-WF for barebox@lists.infradead.org; Wed, 12 Mar 2014 20:51:04 +0000 Date: Wed, 12 Mar 2014 21:50:41 +0100 From: Sascha Hauer Message-ID: <20140312205041.GN17250@pengutronix.de> References: <1394487281-10462-1-git-send-email-antonynpavlov@gmail.com> <1394487281-10462-2-git-send-email-antonynpavlov@gmail.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1394487281-10462-2-git-send-email-antonynpavlov@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 1/8] clocksource: add dummy software-only clocksource To: Antony Pavlov Cc: barebox@lists.infradead.org On Tue, Mar 11, 2014 at 01:34:34AM +0400, Antony Pavlov wrote: > This driver is very handy for initial barebox porting. > It was used for running barebox on DiGiC2-based camera > and initial porting barebox to Loongson-1 and ar9331. > > Signed-off-by: Antony Pavlov > Signed-off-by: Sascha Hauer > Reported-by: Alexander Aring > Reported-by: Alexander Shiyan > --- > drivers/clocksource/Kconfig | 9 +++++++ > drivers/clocksource/Makefile | 1 + > drivers/clocksource/dummy.c | 56 ++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 66 insertions(+) > > diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig > index 4ef25ec..f9e00ff 100644 > --- a/drivers/clocksource/Kconfig > +++ b/drivers/clocksource/Kconfig > @@ -14,6 +14,15 @@ config CLOCKSOURCE_CLPS711X > bool > depends on ARCH_CLPS711X > > +config CLOCKSOURCE_DUMMY > + bool "Enable dummy software-only clocksource" > + default n You can drop the default n, no is the default already. Could you add some help text mentioning that this clocksource is for early bringup only and doesn't provide correct timing? > + > +config CLOCKSOURCE_DUMMY_RATE > + int "compile loglevel" copy/paste ;) ? Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox