From: "Eric Bénard" <eric@eukrea.com>
To: raespi <raespi@icid.cu>
Cc: barebox@lists.infradead.org
Subject: Re: problem booting with Micron MT29F8G08ABABAWP ...
Date: Thu, 13 Mar 2014 21:28:10 +0100 [thread overview]
Message-ID: <20140313212810.4179d0c2@e6520eb> (raw)
In-Reply-To: <532207C7.9020206@icid.cu>
Hi,
Le Thu, 13 Mar 2014 15:32:23 -0400,
raespi <raespi@icid.cu> a écrit :
> Hi ... I'm using barebox 2014.02.0 to boot with a clone of the mini2440
> board using the MT29F8G08ABABAWP NAND.
>
> I'm getting the following error:
>
> barebox 2014.02.0 #1 Thu Mar 13 15:28:57 CDT 2014
>
> Board: <NULL>
> nand: ONFI param page 0 valid
> nand: ONFI flash detected
> nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0x38 (Micron
> MT29F8G08ABABAWP), 1024
> nand: No oob scheme defined for oobsize 224
> BUG: failure at drivers/mtd/nand/nand_base.c:3357/nand_scan_tail()!
> BUG!
> no stack data available
> DIVN_UPLL0
> MPLLVal [M:61h,P:1h,S:2h]
> CLKDIVN:7h
>
> After this poing the board gets resetted back to the original point. I
> can never get to the barebox prompt.
>
> Any ideas on how to fix this ??
>
you may need to add support for 4k+224 page size to your nand
controller.
For example this was done for i.MX in comit
632c45795065e6a7471ab82be38e808eb6204341
Eric
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-03-13 20:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-13 19:32 raespi
2014-03-13 20:28 ` Eric Bénard [this message]
2014-03-14 18:45 ` raespi
2014-03-14 20:18 ` Eric Bénard
2014-03-14 20:30 ` raespi
2014-03-17 6:39 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140313212810.4179d0c2@e6520eb \
--to=eric@eukrea.com \
--cc=barebox@lists.infradead.org \
--cc=raespi@icid.cu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox