From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp5-g21.free.fr ([2a01:e0c:1:1599::14]) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1WOCTa-0007Qe-A9 for barebox@lists.infradead.org; Thu, 13 Mar 2014 20:43:39 +0000 Date: Thu, 13 Mar 2014 21:43:07 +0100 From: Eric =?ISO-8859-1?B?QuluYXJk?= Message-ID: <20140313214307.54dbdad8@e6520eb> In-Reply-To: <53211233.5070806@kosagi.com> References: <53211233.5070806@kosagi.com> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: Porting barebox to Novena: misc questions To: Sean Cross Cc: barebox@lists.infradead.org Hi, Le Thu, 13 Mar 2014 10:04:35 +0800, Sean Cross a =E9crit : > I've finally managed to get U-Boot's SPL to configure DDR3 and load > barebox off of a FAT partition on an i.MX6DL. I also have a barebox > build with most features turned on, and I'm running into a number of > problems. barebox is able to load a zImage off of the FAT partition, > set up ATAGs, and jump to it. So I have the basics done. But there are > lots of little things that aren't working. > = > When I boot without an Ethernet cable plugged in, the "timeout" command > takes a very long time to complete. It generally freezes at "Hit any > key to stop autoboot: 3" and tends to ignore input for around ten > seconds. How can I prevent this from happening, short of compiling out > FEC support? > = that's very similar to what I reported here : http://lists.infradead.org/pipermail/barebox/2014-February/018005.html I didn't yet had time to investigate more based on Sascha's answer but that's on my todo list. Eric _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox