From: Sascha Hauer <s.hauer@pengutronix.de>
To: Renaud Barbier <renaud.barbier@ge.com>
Cc: barebox@lists.infradead.org
Subject: Re: [RESEND PATCH] ppc: P2020RDB: add environment partition support
Date: Thu, 3 Apr 2014 07:54:08 +0200 [thread overview]
Message-ID: <20140403055408.GA17250@pengutronix.de> (raw)
In-Reply-To: <1396448321-11342-1-git-send-email-renaud.barbier@ge.com>
On Wed, Apr 02, 2014 at 03:18:41PM +0100, Renaud Barbier wrote:
> Add an environment partition and support commands so that the system
> configuration can be permanent.
Applied, thanks
Sascha
>
> Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
> ---
> arch/ppc/boards/freescale-p2020rdb/env/bin/init | 2 ++
> arch/ppc/boards/freescale-p2020rdb/env/config | 2 ++
> arch/ppc/boards/freescale-p2020rdb/p2020rdb.c | 9 +++++----
> arch/ppc/configs/p2020rdb_defconfig | 21 ++++++++++++++++++++-
> 4 files changed, 29 insertions(+), 5 deletions(-)
> create mode 100644 arch/ppc/boards/freescale-p2020rdb/env/bin/init
> create mode 100644 arch/ppc/boards/freescale-p2020rdb/env/config
>
> diff --git a/arch/ppc/boards/freescale-p2020rdb/env/bin/init b/arch/ppc/boards/freescale-p2020rdb/env/bin/init
> new file mode 100644
> index 0000000..4d7b03e
> --- /dev/null
> +++ b/arch/ppc/boards/freescale-p2020rdb/env/bin/init
> @@ -0,0 +1,2 @@
> +#!/bin/sh
> +source /env/config
> \ No newline at end of file
> diff --git a/arch/ppc/boards/freescale-p2020rdb/env/config b/arch/ppc/boards/freescale-p2020rdb/env/config
> new file mode 100644
> index 0000000..23e0ba2
> --- /dev/null
> +++ b/arch/ppc/boards/freescale-p2020rdb/env/config
> @@ -0,0 +1,2 @@
> +#!/bin/sh
> +export bootargs="root=/dev/nfs rw ip=bootp"
> \ No newline at end of file
> diff --git a/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c b/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c
> index 4d2ff22..229ae41 100644
> --- a/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c
> +++ b/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c
> @@ -83,7 +83,10 @@ struct i2c_platform_data i2cplat = {
> static int devices_init(void)
> {
> add_cfi_flash_device(DEVICE_ID_DYNAMIC, CFG_FLASH_BASE, 16 << 20, 0);
> -
> + devfs_add_partition("nor0", 0xf60000, 0x8000, DEVFS_PARTITION_FIXED,
> + "env0");
> + devfs_add_partition("nor0", 0xf80000, 0x80000, DEVFS_PARTITION_FIXED,
> + "self0");
> add_generic_device("i2c-fsl", 0, NULL, I2C1_BASE_ADDR,
> 0x100, IORESOURCE_MEM, &i2cplat);
> add_generic_device("i2c-fsl", 1, NULL, I2C2_BASE_ADDR,
> @@ -92,8 +95,6 @@ static int devices_init(void)
> fsl_eth_init(2, &gfar_info[0]);
> fsl_eth_init(3, &gfar_info[1]);
>
> - devfs_add_partition("nor0", 0xf80000, 0x80000, DEVFS_PARTITION_FIXED,
> - "self0");
> return 0;
> }
>
> @@ -106,7 +107,7 @@ static struct NS16550_plat serial_plat = {
>
> static int p2020_console_init(void)
> {
> - barebox_set_model("Freescale P2020 RDB");
> + barebox_set_model("Freescale P2020RDB");
> barebox_set_hostname("p2020rdb");
>
> serial_plat.clock = fsl_get_bus_freq(0);
> diff --git a/arch/ppc/configs/p2020rdb_defconfig b/arch/ppc/configs/p2020rdb_defconfig
> index 868c060..c34e48d 100644
> --- a/arch/ppc/configs/p2020rdb_defconfig
> +++ b/arch/ppc/configs/p2020rdb_defconfig
> @@ -6,10 +6,25 @@ CONFIG_GLOB=y
> CONFIG_CMDLINE_EDITING=y
> CONFIG_AUTO_COMPLETE=y
> CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_BOOTM_ZLIB=y
> +CONFIG_CMD_BOOTM_BZLIB=y
> +CONFIG_ZLIB=y
> +CONFIG_BZLIB=y
> +CONFIG_CMD_EDIT=y
> +CONFIG_CMD_EXPORT=y
> CONFIG_CMD_FLASH=y
> CONFIG_CMD_RESET=y
> CONFIG_CMD_GO=y
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC=n
> +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/ppc/boards/freescale-p2020rdb/env/"
> +CONFIG_CMD_LOADENV=y
> +CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_READLINK=y
> CONFIG_FSL_ELBC=y
> +CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_UNCOMPRESS=y
> CONFIG_DRIVER_CFI=y
> CONFIG_DRIVER_CFI_AMD=y
> CONFIG_DRIVER_CFI_INTEL=n
> @@ -17,7 +32,7 @@ CONFIG_DRIVER_CFI_BANK_WIDTH_1=n
> CONFIG_DRIVER_CFI_BANK_WIDTH_2=y
> CONFIG_DRIVER_CFI_BANK_WIDTH_4=n
> CONFIG_MTD=y
> -CONFIG_MALLOC_SIZE=0x200000
> +CONFIG_MALLOC_SIZE=0x2800000
> CONFIG_BAUDRATE=115200
> CONFIG_DRIVER_SERIAL_NS16550=y
> CONFIG_RELOCATABLE=y
> @@ -34,3 +49,7 @@ CONFIG_CMD_I2C=y
> CONFIG_CMD_MIITOOL=y
> CONFIG_CMD_MEMTEST=y
> CONFIG_CMD_IOMEM=y
> +CONFIG_CMD_VERSION=n
> +CONFIG_OFTREE=y
> +CONFIG_CMD_OFTREE_PROBE=y
> +CONFIG_CMD_OFTREE=y
> \ No newline at end of file
> --
> 1.8.4.2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2014-04-03 5:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-02 14:18 Renaud Barbier
2014-04-02 14:35 ` Alexander Aring
2014-04-02 15:01 ` Renaud Barbier
2014-04-03 5:54 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140403055408.GA17250@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=renaud.barbier@ge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox