mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Michel Stam <michel@reverze.net>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 2/3] x86: Add support for IDE on the legacy I/O ports
Date: Sat, 5 Apr 2014 05:11:20 +0200	[thread overview]
Message-ID: <20140405031120.GA15426@ns203013.ovh.net> (raw)
In-Reply-To: <53316480.2030103@reverze.net>

On 12:12 Tue 25 Mar     , Michel Stam wrote:
> 
> ---
>  arch/x86/boards/x86_generic/generic_pc.c | 71 ++++++++++++++++++++++++
>  drivers/ata/ide-sff.c                    | 94
> ++++++++++++++++++++++++++------
>  drivers/ata/intf_platform_ide.c          | 14 ++++-
>  include/ata_drive.h                      |  1 +
>  4 files changed, 161 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/x86/boards/x86_generic/generic_pc.c
> b/arch/x86/boards/x86_generic/generic_pc.c
> index 74a7224..6152afc 100644
> --- a/arch/x86/boards/x86_generic/generic_pc.c
> +++ b/arch/x86/boards/x86_generic/generic_pc.c
> @@ -27,6 +27,10 @@
>  #include <ns16550.h>
>  #include <linux/err.h>
>  +#ifdef CONFIG_DISK_INTF_PLATFORM_IDE
why the ifdef?
> +#include <platform_ide.h>
> +#endif
> +
>  /*
>   * These datas are from the MBR, created by the linker and filled by the
>   * setup tool while installing barebox on the disk drive
> @@ -41,6 +45,55 @@ extern uint8_t pers_env_drive;
>   */
>  #define PATCH_AREA_PERS_SIZE_UNUSED 0x000
>  +#ifdef CONFIG_DISK_INTF_PLATFORM_IDE
> +
> +static struct ide_port_info ide_plat = {
> +	.ioport_shift = 0,
> +	.dataif_be = 0,
> +};
> +
> +static struct resource primary_ide_resources[] = {
> +	{
> +		.name = "base",
> +		.start = 0x1f0,
> +		.end =  0x1f8,
> +		.flags = IORESOURCE_IO
> +	},
> +	{
> +		.name = "alt",
> +		.start = 0x3f6,
> +	w	.end =  0x3f8,
> +		.flags = IORESOURCE_IO
> +	}
> +};
> +
> +static struct resource secondary_ide_resources[] = {
> +	{
> +		.name = "base",
> +		.start = 0x170,
> +		.end =  0x177,
> +		.flags = IORESOURCE_IO
> +	},
> +};
> +
> +static struct device_d primary_ide_device = {
> +	.name = "ide_intf",
> +	.id = 0,
> +	.platform_data = &ide_plat,
> +	.resource = primary_ide_resources,
> +	.num_resources = ARRAY_SIZE( primary_ide_resources ),
> +};
> +
> +static struct device_d secondary_ide_device = {
> +	.name = "ide_intf",
> +	.id = 1,
> +	.platform_data = &ide_plat,
> +	.resource = secondary_ide_resources,
> +	.num_resources = ARRAY_SIZE( secondary_ide_resources ),
> +};
please create the device on the fly
> +
> +#endif /* CONFIG_DISK_INTF_PLATFORM_IDE */
> +
>  static int devices_init(void)
>  {
>  	struct cdev *cdev;
> @@ -48,9 +101,26 @@ static int devices_init(void)
>  	/* extended memory only */
>  	add_mem_device("ram0", 0x0, bios_get_memsize() << 10,
>  		       IORESOURCE_MEM_WRITEABLE);
> +#ifdef CONFIG_DISK_BIOS
if (IS_ENABLED(CONFxx))
>  	add_generic_device("biosdrive", DEVICE_ID_DYNAMIC, NULL, 0, 0,
> IORESOURCE_MEM,
>  			NULL);
> +#endif
> +
> +#ifdef CONFIG_DISK_INTF_PLATFORM_IDE
ditto and no space after ( and before )
> +	platform_device_register( &primary_ide_device );
> +	platform_device_register( &secondary_ide_device );
> +
> +	if (pers_env_size != PATCH_AREA_PERS_SIZE_UNUSED) {
> +		cdev = devfs_add_partition("ata0",
> +				pers_env_storage * 512,
> +				(unsigned)pers_env_size * 512,
> +				DEVFS_PARTITION_FIXED, "env0");
> +		printf("Partition: %ld\n", IS_ERR(cdev) ? PTR_ERR(cdev) : 0);
> +	} else
> +		printf("No persistent storage defined\n");
> +#endif /* CONFIG_DISK_INTF_PLATFORM_IDE */
>  +#ifdef CONFIG_DISK_BIOS
>  	if (pers_env_size != PATCH_AREA_PERS_SIZE_UNUSED) {
>  		cdev = devfs_add_partition("biosdisk0",
>  				pers_env_storage * 512,
> @@ -59,6 +129,7 @@ static int devices_init(void)
>  		printf("Partition: %ld\n", IS_ERR(cdev) ? PTR_ERR(cdev) : 0);
>  	} else
>  		printf("No persistent storage defined\n");
> +#endif
>           return 0;
>  }
> diff --git a/drivers/ata/ide-sff.c b/drivers/ata/ide-sff.c
> index 3d5932e..809a129 100644
> --- a/drivers/ata/ide-sff.c
> +++ b/drivers/ata/ide-sff.c
> @@ -15,13 +15,71 @@
>  #define DISK_SLAVE 1
>   /**
> + * Read a byte from the ATA controller
> + * @param ide IDE port structure
> + * @param addr Register adress
> + * @return Register's content
> + */
> +static inline uint8_t ata_rd_byte(struct ide_port *ide, void
> __iomem *addr )
> +{
> +	if (!ide->io.mmio)
> +		return (uint8_t) inb((int) addr);
> +	else
> +		return readb(addr);
> +}
> +
> +/**
> + * Write a byte to the ATA controller
> + * @param ide IDE port structure
> + * @param value Value to write
> + * @param addr Register adress
> + * @return Register's content
> + */
> +static inline void ata_wr_byte(struct ide_port *ide, uint8_t value,
> void __iomem *addr )
> +{
> +	if (!ide->io.mmio)
> +		outb(value, (int) addr);
> +	else
> +		writeb(value,addr);
> +}
> +
> +/**
> + * Read a word from the ATA controller
> + * @param ide IDE port structure
> + * @param addr Register adress
> + * @return Register's content
> + */
> +static inline uint16_t ata_rd_word(struct ide_port *ide, void
> __iomem *addr )
> +{
> +	if (!ide->io.mmio)
> +		return (uint16_t) inw((int) addr);
> +	else
> +		return readw(addr);
> +}
> +
> +/**
> + * Write a word to the ATA controller
> + * @param ide IDE port structure
> + * @param value Value to write
> + * @param addr Register adress
> + * @return Register's content
> + */
> +static inline void ata_wr_word(struct ide_port *ide, uint16_t
> value, void __iomem *addr )
> +{
> +	if (!ide->io.mmio)
> +		outw(value, (int) addr);
> +	else
> +		writew(value,addr);
> +}
> +
> +/**
>   * Read the status register of the ATA drive
>   * @param io Register file
>   * @return Register's content
>   */
>  static uint8_t ata_rd_status(struct ide_port *ide)
>  {
> -	return readb(ide->io.status_addr);
> +	return ata_rd_byte(ide,ide->io.status_addr);
>  }
>   /**
> @@ -83,12 +141,12 @@ static int ata_set_lba_sector(struct ide_port
> *ide, unsigned drive, uint64_t num
>  	if (num > 0x0FFFFFFF || drive > 1)
>  		return -EINVAL;
>  -	writeb(0xA0 | LBA_FLAG | drive << 4 | num >> 24, ide->io.device_addr);
> -	writeb(0x00, ide->io.error_addr);
> -	writeb(0x01, ide->io.nsect_addr);
> -	writeb(num, ide->io.lbal_addr);	/* 0 ... 7 */
> -	writeb(num >> 8, ide->io.lbam_addr); /* 8 ... 15 */
> -	writeb(num >> 16, ide->io.lbah_addr); /* 16 ... 23 */
> +	ata_wr_byte(ide, 0xA0 | LBA_FLAG | drive << 4 | num >> 24,
> ide->io.device_addr);
> +	ata_wr_byte(ide, 0x00, ide->io.error_addr);
> +	ata_wr_byte(ide, 0x01, ide->io.nsect_addr);
> +	ata_wr_byte(ide, num, ide->io.lbal_addr);	/* 0 ... 7 */
> +	ata_wr_byte(ide, num >> 8, ide->io.lbam_addr); /* 8 ... 15 */
> +	ata_wr_byte(ide, num >> 16, ide->io.lbah_addr); /* 16 ... 23 */
>   	return 0;
>  }
> @@ -107,7 +165,7 @@ static int ata_wr_cmd(struct ide_port *ide, uint8_t cmd)
>  	if (rc != 0)
>  		return rc;
>  -	writeb(cmd, ide->io.command_addr);
> +	ata_wr_byte(ide, cmd, ide->io.command_addr);
>  	return 0;
>  }
>  @@ -118,7 +176,7 @@ static int ata_wr_cmd(struct ide_port *ide,
> uint8_t cmd)
>   */
>  static void ata_wr_dev_ctrl(struct ide_port *ide, uint8_t val)
>  {
> -	writeb(val, ide->io.ctl_addr);
> +	ata_wr_byte(ide, val, ide->io.ctl_addr);
>  }
>   /**
> @@ -133,10 +191,10 @@ static void ata_rd_sector(struct ide_port
> *ide, void *buf)
>   	if (ide->io.dataif_be) {
>  		for (; u > 0; u--)
> -			*b++ = be16_to_cpu(readw(ide->io.data_addr));
> +			*b++ = be16_to_cpu(ata_rd_word(ide, ide->io.data_addr));
>  	} else {
>  		for (; u > 0; u--)
> -			*b++ = le16_to_cpu(readw(ide->io.data_addr));
> +			*b++ = le16_to_cpu(ata_rd_word(ide, ide->io.data_addr));
>  	}
>  }
>  @@ -152,10 +210,10 @@ static void ata_wr_sector(struct ide_port
> *ide, const void *buf)
>   	if (ide->io.dataif_be) {
>  		for (; u > 0; u--)
> -			writew(cpu_to_be16(*b++), ide->io.data_addr);
> +			ata_wr_word(ide, cpu_to_be16(*b++), ide->io.data_addr);
>  	} else {
>  		for (; u > 0; u--)
> -			writew(cpu_to_le16(*b++), ide->io.data_addr);
> +			ata_wr_word(ide, cpu_to_le16(*b++), ide->io.data_addr);
>  	}
>  }
>  @@ -169,10 +227,10 @@ static int ide_read_id(struct ata_port *port,
> void *buf)
>  	struct ide_port *ide = to_ata_drive_access(port);
>  	int rc;
>  -	writeb(0xA0, ide->io.device_addr);	/* FIXME drive */
> -	writeb(0x00, ide->io.lbal_addr);
> -	writeb(0x00, ide->io.lbam_addr);
> -	writeb(0x00, ide->io.lbah_addr);
> +	ata_wr_byte(ide, 0xA0, ide->io.device_addr);	/* FIXME drive */
> +	ata_wr_byte(ide, 0x00, ide->io.lbal_addr);
> +	ata_wr_byte(ide, 0x00, ide->io.lbam_addr);
> +	ata_wr_byte(ide, 0x00, ide->io.lbah_addr);
>   	rc = ata_wr_cmd(ide, ATA_CMD_ID_ATA);
>  	if (rc != 0)
> @@ -327,6 +385,8 @@ int ide_port_register(struct ide_port *ide)
>  	ide->port.ops = &ide_ops;
>   	ret = ata_port_register(&ide->port);
> +	if ( !ret )
> +		ata_port_detect(&ide->port);
>   	if (ret)
>  		free(ide);
> diff --git a/drivers/ata/intf_platform_ide.c
> b/drivers/ata/intf_platform_ide.c
> index 8ae0f05..24f78f4 100644
> --- a/drivers/ata/intf_platform_ide.c
> +++ b/drivers/ata/intf_platform_ide.c
> @@ -89,8 +89,18 @@ static int platform_ide_probe(struct device_d *dev)
>  	}
>   	ide = xzalloc(sizeof(*ide));
> -	reg_base = dev_request_mem_region(dev, 0);
> -	alt_base = dev_request_mem_region(dev, 1);
> +	reg_base = dev_request_region(dev, 0, IORESOURCE_MEM);
please check your coding style
> +	if (reg_base != NULL)
> +	{
> +		alt_base = dev_request_region(dev, 1, IORESOURCE_MEM);
> +		ide->io.mmio = 1;
> +	}
> +	else
> +	{
> +		reg_base = dev_request_region(dev, 0, IORESOURCE_IO);
> +		alt_base = dev_request_region(dev, 1, IORESOURCE_IO);
> +	}
> +
>  	platform_ide_setup_port(reg_base, alt_base, &ide->io,
> pdata->ioport_shift);
>  	ide->io.reset = pdata->reset;
>  	ide->io.dataif_be = pdata->dataif_be;
> diff --git a/include/ata_drive.h b/include/ata_drive.h
> index 6d6cca4..44073cb 100644
> --- a/include/ata_drive.h
> +++ b/include/ata_drive.h
> @@ -119,6 +119,7 @@ struct ata_ioports {
>  	/* hard reset line handling */
>  	void (*reset)(int);	/* true: assert reset, false: de-assert reset */
>  	int dataif_be;	/* true if 16 bit data register is big endian */
> +	int mmio; /* true if memory-mapped io */
so use a boolean
>  };
>   struct ata_port;
> -- 
> 1.8.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2014-04-05  3:09 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-25 11:12 Michel Stam
2014-04-05  3:11 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2014-04-05  6:36   ` Michel Stam
2014-04-05  5:01 ` Alexander Aring
2014-04-05  6:39   ` Michel Stam
2014-04-05  6:45     ` Alexander Aring
2014-04-05  6:56       ` Michel Stam
2014-04-05  6:58         ` Alexander Aring
2014-04-05  7:12           ` Michel Stam
2014-04-05  7:18             ` Alexander Aring
2014-04-05  7:20               ` Michel Stam
2014-04-05  7:21                 ` Alexander Aring
2014-04-04 13:41 [PATCH 1/3] common: Allow for I/O mapped I/O michel
2014-04-04 13:41 ` [PATCH 2/3] x86: Add support for IDE on the legacy I/O ports michel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140405031120.GA15426@ns203013.ovh.net \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    --cc=michel@reverze.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox