mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Lucas Stach <dev@lynxeye.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 00/18] Tegra 3 support
Date: Wed, 23 Apr 2014 11:41:25 +0200	[thread overview]
Message-ID: <20140423094125.GI5858@pengutronix.de> (raw)
In-Reply-To: <1397395668-9325-1-git-send-email-dev@lynxeye.de>

On Sun, Apr 13, 2014 at 03:27:30PM +0200, Lucas Stach wrote:
> Ok, this one took me a little longer than I would
> have wished for, but now it's good enough to post.
> 
> This series adds support for the Tegra 3 line of
> SoCs. This includes a clock driver that sets up the
> PLLs and peripheral clocks and a pinctrl driver to
> bring the external muxing into a sane state.
> 
> There is still a lot to do here, but with this
> series barebox starts up on an NVidia Beaver board
> and the eMMC is usable.
> 
> Next step would be to integrate BCT writing into
> the Tegra image process so barebox is able to write
> itself to MMC as a bootable image.
> 
> Lucas Stach (18):
>   gpio: tegra: remove dead code
>   mmc: tegra: fix typo
>   tegra: disable more lowlevel unsafe switch optimizations
>   tegra: source MSELECT clock from CLK_M
>   tegra: add Tegra3 kconfig symbol
>   tegra: add Tegra3 ramsize detection
>   tegra: add Tegra3 mem initcall
>   tegra: recognize T30 in debug UART code
>   dt-bindings: add pinctrl-tegra.h
>   pinctrl: tegra: add Tegra3 driver
>   dt-bindings: add tegra30-car.h
>   clk: tegra: consider new T30 clock registers
>   clk: tegra: add Tegra3 driver
>   gpio: tegra: add Tegra3 setup
>   ARM: tegra: add basic Tegra3 DT
>   ARM: tegra: add NVidia Beaver board support
>   ARM: dts: tegra: add full Beaver pinmux
>   defconfig: tegra: add some useful options

Applied, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2014-04-23  9:41 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-13 13:27 Lucas Stach
2014-04-13 13:27 ` [PATCH 01/18] gpio: tegra: remove dead code Lucas Stach
2014-04-13 13:27 ` [PATCH 02/18] mmc: tegra: fix typo Lucas Stach
2014-04-13 13:27 ` [PATCH 03/18] tegra: disable more lowlevel unsafe switch optimizations Lucas Stach
2014-04-13 13:27 ` [PATCH 04/18] tegra: source MSELECT clock from CLK_M Lucas Stach
2014-04-13 13:27 ` [PATCH 05/18] tegra: add Tegra3 kconfig symbol Lucas Stach
2014-04-13 13:27 ` [PATCH 06/18] tegra: add Tegra3 ramsize detection Lucas Stach
2014-04-13 13:27 ` [PATCH 07/18] tegra: add Tegra3 mem initcall Lucas Stach
2014-04-13 13:27 ` [PATCH 08/18] tegra: recognize T30 in debug UART code Lucas Stach
2014-04-13 13:27 ` [PATCH 09/18] dt-bindings: add pinctrl-tegra.h Lucas Stach
2014-04-13 13:27 ` [PATCH 10/18] pinctrl: tegra: add Tegra3 driver Lucas Stach
2014-04-13 13:27 ` [PATCH 11/18] dt-bindings: add tegra30-car.h Lucas Stach
2014-04-13 13:27 ` [PATCH 12/18] clk: tegra: consider new T30 clock registers Lucas Stach
2014-04-13 13:27 ` [PATCH 13/18] clk: tegra: add Tegra3 driver Lucas Stach
2014-04-13 13:27 ` [PATCH 14/18] gpio: tegra: add Tegra3 setup Lucas Stach
2014-04-13 13:27 ` [PATCH 15/18] ARM: tegra: add basic Tegra3 DT Lucas Stach
2014-04-13 13:27 ` [PATCH 16/18] ARM: tegra: add NVidia Beaver board support Lucas Stach
2014-04-13 13:27 ` [PATCH 17/18] ARM: dts: tegra: add full Beaver pinmux Lucas Stach
2014-04-13 13:27 ` [PATCH 18/18] defconfig: tegra: add some useful options Lucas Stach
2014-04-23  9:41 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140423094125.GI5858@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=dev@lynxeye.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox