From: Sascha Hauer <s.hauer@pengutronix.de>
To: Wadim Egorov <w.egorov@phytec.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/4] PCM051: Update RAM timings
Date: Wed, 14 May 2014 09:21:30 +0200 [thread overview]
Message-ID: <20140514072130.GA5858@pengutronix.de> (raw)
In-Reply-To: <1399897462-21433-1-git-send-email-w.egorov@phytec.de>
On Mon, May 12, 2014 at 02:24:19PM +0200, Wadim Egorov wrote:
> From: Teresa Gámez <t.gamez@phytec.de>
>
> Updated timings for new MT41J256M16HA15EIT RAM.
> Timings are backward compatible to the MT41J256M8HX15E RAMs
Applied 1/2 and 2/2 for now.
Sascha
>
> Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
> Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
> ---
> arch/arm/boards/phytec-phycore-am335x/lowlevel.c | 28 ++++++++++-----------
> 1 files changed, 13 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm/boards/phytec-phycore-am335x/lowlevel.c b/arch/arm/boards/phytec-phycore-am335x/lowlevel.c
> index f04961d..2badcc1 100644
> --- a/arch/arm/boards/phytec-phycore-am335x/lowlevel.c
> +++ b/arch/arm/boards/phytec-phycore-am335x/lowlevel.c
> @@ -15,7 +15,7 @@
> #include <mach/wdt.h>
> #include <debug_ll.h>
>
> -static const struct am33xx_cmd_control MT41J256M8HX15E_2x256M8_cmd = {
> +static const struct am33xx_cmd_control MT41J256M16HA15EIT_1x512MB_cmd = {
> .slave_ratio0 = 0x40,
> .dll_lock_diff0 = 0x0,
> .invert_clkout0 = 0x1,
> @@ -27,23 +27,21 @@ static const struct am33xx_cmd_control MT41J256M8HX15E_2x256M8_cmd = {
> .invert_clkout2 = 0x1,
> };
>
> -static const struct am33xx_emif_regs MT41J256M8HX15E_2x256M8_regs = {
> +static const struct am33xx_emif_regs MT41J256M16HA15EIT_1x512MB_regs = {
> .emif_read_latency = 0x6,
> - .emif_tim1 = 0x0668A39B,
> - .emif_tim2 = 0x26337FDA,
> - .emif_tim3 = 0x501F830F,
> - .sdram_config = 0x61C04832,
> + .emif_tim1 = 0x0888A39B,
> + .emif_tim2 = 0x26517FDA,
> + .emif_tim3 = 0x501F84EF,
> + .sdram_config = 0x61C04B32,
> .zq_config = 0x50074BE4,
> .sdram_ref_ctrl = 0x0000093B,
> };
>
> -static const struct am33xx_ddr_data MT41J256M8HX15E_2x256M8_data = {
> +static const struct am33xx_ddr_data MT41J256M16HA15EIT_1x512MB_data = {
> .rd_slave_ratio0 = 0x3B,
> - .wr_dqs_slave_ratio0 = 0x85,
> - .fifo_we_slave_ratio0 = 0x100,
> - .wr_slave_ratio0 = 0xC1,
> - .use_rank0_delay = 0x01,
> - .dll_lock_diff0 = 0x0,
> + .wr_dqs_slave_ratio0 = 0x3B,
> + .fifo_we_slave_ratio0 = 0x96,
> + .wr_slave_ratio0 = 0x76,
> };
>
> extern char __dtb_am335x_phytec_phycore_start[];
> @@ -72,9 +70,9 @@ static noinline void pcm051_board_init(void)
>
> am33xx_pll_init(MPUPLL_M_600, 25, DDRPLL_M_303);
>
> - am335x_sdram_init(0x18B, &MT41J256M8HX15E_2x256M8_cmd,
> - &MT41J256M8HX15E_2x256M8_regs,
> - &MT41J256M8HX15E_2x256M8_data);
> + am335x_sdram_init(0x18B, &MT41J256M16HA15EIT_1x512MB_cmd,
> + &MT41J256M16HA15EIT_1x512MB_regs,
> + &MT41J256M16HA15EIT_1x512MB_data);
>
> am33xx_uart0_soft_reset();
> am33xx_enable_uart0_pin_mux();
> --
> 1.7.0.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2014-05-14 7:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-12 12:24 Wadim Egorov
2014-05-12 12:24 ` [PATCH 2/4] barebox: common: added new filetypes Wadim Egorov
2014-05-12 12:24 ` [PATCH 3/4] ARM: omap: barebox update nand xloadslots handler Wadim Egorov
2014-05-13 8:38 ` Sascha Hauer
2014-05-13 9:46 ` Alexander Aring
2014-05-12 12:24 ` [PATCH 4/4] phycore-am335x: Added bbu " Wadim Egorov
2014-05-12 14:13 ` Holger Schurig
2014-05-14 7:21 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140514072130.GA5858@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=w.egorov@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox