From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: v2014.06.0
Date: Wed, 4 Jun 2014 20:49:55 +0200 [thread overview]
Message-ID: <20140604184954.GH15686@pengutronix.de> (raw)
Here comes the barebox release for June.
The diffstat is huge this time. It shows that we now use the upstream
devicetree files which hopefully makes it easier to keep the files in
sync with the kernel. Some other changes worth noting:
- We now have Tegra3 support
- More MIPS devicetree support
- Support for Rockchip SoCs
- RiOTboard support
- initial Voltage Regulator support
- We have our first game in barebox: 2048
As usual here comes the detailed list of patches that went into
this release.
Sascha
----------------------------------------------------------------
Alexander Aring (3):
memtest: cleanup error handling
memtest: cleanup requests of regions
memtest: copyright to UPPER case and fix typo
Alexander Shiyan (16):
Documentation: Update binding doc for i.MX IIM
GPIO: i.MX: Implement get_direction()
spi: i.MX: Simplify cspi_0_0_init()
spi: i.MX: Optimise driver private structure
gui: Fix resource leak
lzo: Remove unused variable
ubifs: Remove unused variable
commands/usbserial: Remove unused variable
ata: pata-imx: Remove unused variable
mtd: partition: Remove unused variable
mtd: nand: bbt: Remove unused variable
imx_keypad: Fix error handling
commands/mount: Return real error code if "mount" fail
commands/umount: Return real error code if "umount" fail
ARM: Remove excess "select GENERIC_GPIO"
SPI: i.MX: Remove redundant assignment
Antony Pavlov (13):
spi: import bitbang txrx utility functions from linux
spi: add controller driver for Atheros AR7XXX/AR9XXX SoCs
MIPS: ar9331.dtsi: add SPI master
MIPS: tplink-mr3020.dts: add S25FL032PIF SPI flash chip
MIPS: tplink-mr3020_defconfig: add SPI support
MIPS: add Longson LS1B SoC dtsi file
MIPS: add Loongson Tech LS1B Demo Board dts file
MIPS: loongson-ls1b: switch to device tree
spi: altera_spi: fix altera_spi_setup() return error codes
net: usb: asix: fix formating
clk: move of_clk_get_parent_name() to common clk code
clk: fixed-factor: add DT init function
stdlib.h: include missed types.h
Beniamino Galvani (13):
net: add ARC EMAC driver
mfd: add act8846 driver
ARM: add basic support for Rockchip SoCs
ARM: rockchip: add PLL initialization function
clk: gate: add flags argument to clock gate constructor
clk: gate: unify enable and disable functions handling
clk: gate: add CLK_GATE_HIWORD_MASK flag
clk: add rockchip clock gate driver
pinctrl: add rockchip pinctrl and gpio drivers
ARM: dts: add Rockchip devicetree files
ARM: rockchip: add radxa-rock board
ARM: Rockchip: use upstream dtsi files
ARM: radxa-rock: set hostname after devicetree initialization
Christian Hemp (4):
imx6:mmdc: Move register defines to header file
imx6: read back memory size
imx6: Add support for phyCARD-i.MX6
imx:mmdc:Move imx6-reg include to imx6-mmdc header
Christoph Fritz (3):
tftp: add timeframe when remote server is retransmitting
net cpsw: fix rx stability under heavy network load
common: fix macro WARN
Eric Bénard (1):
RiOTboard: add new board
Fabio Estevam (1):
serial: imx: Fix buggy transmissions when baudrate mismatches
Franck Jullien (2):
asm-generic: add IO memory accessors
driver/net: fix bus endianess access in ethoc.c
Juergen Borleis (3):
net/ifup.c: don't fail silently
net/ifup.c: avoid setting the MAC twice
default environment: force a specific return value
Lucas Stach (33):
clk: tegra20: convert to dt-binding defines
dt-bindings: add pinctrl-tegra.h
ARM: dts: update Tegra20 base dtsi to Linux 3.14
ARM: dts: update paz00 DT to Linux 3.14
ARM: dts: update colibri + iris DTs to Linux 3.14
gpio: tegra: remove dead code
mmc: tegra: fix typo
tegra: disable more lowlevel unsafe switch optimizations
tegra: source MSELECT clock from CLK_M
tegra: add Tegra3 kconfig symbol
tegra: add Tegra3 ramsize detection
tegra: add Tegra3 mem initcall
tegra: recognize T30 in debug UART code
pinctrl: tegra: add Tegra3 driver
dt-bindings: add tegra30-car.h
clk: tegra: consider new T30 clock registers
clk: tegra: add Tegra3 driver
gpio: tegra: add Tegra3 setup
ARM: tegra: add basic Tegra3 DT
ARM: tegra: add NVidia Beaver board support
ARM: dts: tegra: add full Beaver pinmux
defconfig: tegra: add some useful options
ARM: nitrogen6x: remove VPU/IPU QoS from DCD
ARM: change signature of barebox_arm_entry
ARM: beaglebone: remove extra FDT memcpy
ARM: eDM-QMX6: remove extra FDT memcpy
ARM: phycore-am33xx: remove extra FDT memcpy
ARM: imx: move malloc area to upper memory bank by default
ARM: bootm: be more clever while deciding where to put zImage
ARM: bootm: fix default uImage placement
ARM: phycard-imx6: fixup for barebox_arm_entry signature change
ARM: tegra30: slow down CPU to 600 MHz
ARM: tegra30: ramp vdd_core to 1,2V
Marc Kleine-Budde (1):
2048: port to barebox
Matteo Fortini (1):
sama5d3x: fix AT91_SMC_CS offset stride
Michael Olbrich (3):
ARM: dts: i.MX53: tqma53: Readd barebox specifics
ARM Samsung: fix booting from NAND with pbl
net: dm9k: only read on packet for each call to dm9k_eth_rx()
Michel Stam (3):
common: Allow for I/O mapped I/O
x86: Add support for IDE on the legacy I/O ports
x86: ns16550: Rework driver to allow for x86 I/O space
Owen Kirby (1):
Fix the options and protocols used by the loadx command.
Sascha Hauer (52):
ppc: io: Add _IO_BASE define
mips: io: include generic io.h
openrisc: Use generic io accessors
Add devicetree source files as of Linux-3.15-rc2
serial: ns16550: omap: set register shift from code
of: partition: set device_node of the newly created partition
of: move of_find_device_by_node_path to drivers/of/of_path.c
of_path: Allow to specify path with phandle only
environment: drop envfs_register_partition
env: erase/protect in envfs_save
mtd: nand: bb: use mtd api directly
mtd: refactor bb device creation
mtd: nand: create bb devices automatically
OF: barebox-env: Use bb device on NAND
dts: Use dt-bindings from kernel
dts: i.MX51 efika sb: Roll back pingroup changes
ARM: dts: i.MX51: Use upstream dts files
ARM: i.MX6: Use upstream dtsi files
ARM: i.MX53: Use upstream dtsi files
Add initial regulator support
mci: Add regulator support
ARM: Rockchip: switch to multiimage support
ARM: i.MX25: Use upstream dtsi file
ARM: i.MX27: Use upstream dtsi file
ARM: AM33xx: Use upstream dtsi file
ARM: Tegra20: Use upstream dtsi files
ARM: dove: Use upstream dtsi file
dts: update to v3.15-rc3
Merge branch 'for-next/dts'
Merge branch 'for-next/env'
Merge branch 'for-next/ifup'
Merge branch 'for-next/imx'
Merge branch 'for-next/ioresource'
Merge branch 'for-next/memtest'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/of'
Merge branch 'for-next/regulator'
Merge branch 'for-next/rockchip'
Merge branch 'for-next/tegra'
ARM: dts: remove unused i.MX pinfunc header files
video: i.MX IPUv3: remove debug leftover
video: i.MX IPUv3: Print error as string
ARM: dts: Add generated files to clean rule
boot: fix multiple boot sources
boot: iterate over directories in alphabetical order
drop CONFIG_PARTITION_NEED_MTD
ARM: AM33xx: make bbu handler static inline
mtd: nand: mxs: Fix 2k nand with oob size of 224 bytes
net: fec_imx: mask mii register reads correctly
net: fec_imx: check return value of registration functions
Release v2014.06.0
Silvio Fricke (2):
ARM: i.MX6: dts: edmqmx6: use new dts approach
ARM: i.MX: edmqmx6: disable menu framework
Steffen Trumtrar (1):
syscon: fix prototype compile error
Uladzimir Bely (1):
imx6: ocotp: Add On-Chip OTP registers write support
Wjatscheslaw Stoljarski (4):
imx-spi: enable v0.7 spi driver for imx53-cspi
imx53: add imx53_add_cspi
imx-spi: enable v0.7 spi driver for imx53-cspi
imx53: add imx53_add_cspi
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2014-06-04 18:50 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140604184954.GH15686@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox