From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: v2014.07.0
Date: Fri, 4 Jul 2014 17:15:34 +0200 [thread overview]
Message-ID: <20140704151533.GA23235@pengutronix.de> (raw)
Hi All,
We have a release for July.
238 non merge patches went into this release which makes it quite
big. Tegra support has improved greatly since the last release.
Most visible change is Holgers command help reorganization. All
commands are in groups now which show up consistently in the
'help' command output and in the Kconfig menu. Thanks Holger.
Other than that we have more conversion to device tree and various
fixes all over the place.
Have a nice weekend
Sascha
----------------------------------------------------------------
Alexander Shiyan (2):
2048: Reset score on startup
ARM: dts: Remove orphaned i.MX27 DT template
Antony Pavlov (15):
usb: remove unimplemented usb_get_dev_index() declaration
usb: drop unused USB_UHCI_*_ID macros
vsprintf: fix formatting
ARM: initial support for RC Module UEMD SoCs
ARM: uemd: add DEBUG_LL support
clocksource: add uemd clocksource
ARM: dts: add minimal К1879ХБ1Я devicetree file
ARM: uemd: add mb7707 board support
ARM: uemd: add module-mb7707_defconfig
ARM: mb7707: add barebox mini-howto
MIPS: dlink-dir-320: switch to dt
make .gitignore files visible to git
MIPS: dts: add .gitignore for generated files
treewide: remove address of the Free Software Foundation
commands: gpio_direction_output: add missed VALUE parameter to help message
Beniamino Galvani (2):
net: arc_emac: remove delay from mdio polling loop
net: arc_emac: disable interrupts
Bo Shen (1):
ARM: atmel: add sama5d3_xplained support
Christian Hemp (1):
imx6:phyFLEX: Fix ENTRY_FUNCTION
Franck Jullien (5):
drivers/net/ethoc: add mdio bus support
devinfo: add human readable size after memory range
openrisc: update SPR registers definition
openrisc: fix relocation code
openrisc: update cpuinfo
Herve Codina (4):
mtd: Fix writesize parameter value
mtd: fix mtd erasesize
param: Add support for long long read only dev param
mtd: use long long dev param for size
Holger Schurig (30):
commands: group 'help' output
commands: harmonize in-barebox documentation
commands: harmonize in-barebox docs with Kconfig docs
commands: CMD_MEMORY -> COMPILE_MEMORY
commands: CMD_DIGEST -> COMPILE_DIGEST
commands: move CMD_ARM_CPUINFO to commands/Kconfig
commands: move CMD_ARM_MMUINFO to commands/Kconfig
commands: move CMD_BOOT_ORDER to commands/Kconfig
commands: move CMD_AT91_BOOT_TEST to commands/Kconfig
commands: move CMD_AT91MUX to commands/Kconfig
commands: move CMD_AT91MIX to commands/Kconfig
commands: HUSH_GETOPT -> CMD_GETOPT
commands: let all network commands depend on NET
commands: introduce CMD_HOST
commands: NET_PING -> CMD_PING
commands: NET_DHCP -> CMD_DHCP
commands: move CMD_IFUP to commands/Kconfig
commands: move CONFIG_LONGHELP to commands/Kconfig
magicvars: can now also list values
commands: rename "gpiolib" -> "gpioinfo"
drvlist: factor the driver list out of 'devinfo'
devinfo: make the output of "devinfo DEVICE" nicer
parameters: only show possible enumerations if there are any
net: show enetaddr in lowercase
meminfo: purely cosmetical changes
misc: upper-case some abbreviations
bootm: beautify output
devinfo: reduce indentation
commands: include missing header
menutree: let it select GLOB and GLOB_SORT
Jan Luebbe (3):
arm: omap: am33xx_generic: detect more boot sources
ARM: AM3xxx: Add support for building AM33xx spi images
spi: omap: support swapping D0/D1
Lucas Stach (56):
reset: add reset controller framework
tegra: lowlevel: add function to fetch chipid
reset: add tegra reset controller
clk: tegra: reset UARTS from clock controller
mci: tegra: add reset control
clk: tegra: remove device reset hack
clk: tegra: allow to register clocks with 16 bit divider
clk: tegra30: register i2c clocks
clk: tegra20: register i2c clocks
i2c: add Tegra driver
ARM: tegra: beaver: activate sdmmc1 voltage rail
ARM: tegra: beaver: adjust pinmux to make sdmmc1 work
mci: tegra: apply pad autocalibration on T30
mci: tegra: don't set 8bit mode unconditionally
pinctrl: tegra30: parse drive groups
scripts: tegra: import cbootimage
tegra: cbootimage: remove noisy output
Makefile.lib: add rule to built Tegra BCTs
images: add Tegra20 image build rules
images: add Tegra30 image build rules
ARM: boards: colibri t20: import BCT cfgs
images: tegra: build all Toradex Colibri images
ARM: boards: beaver: import BCT cfg
images: tegra: build NVidia Beaver image
images: tegra: rename ac100 image
mci: implement non-removable property
tegra: lowlevel-dvc: use __always_inline macro
tegra: pmc: add Tegra30 compatible
ARM: hummingboard: add barebox update handler
tegra: pmc: add command to get into RCM
tegra: lowlevel: setup an early stack
tegra: add Tegra124 id to lowlevel functions
tegra: lowlevel: fix ODMdata fetch on Tegra124
tegra: recognize Tegra124 in maincomplex startup
tegra: recognize Tegra124 in common initcalls
tegra: add Tegra124 and AS3722 PMIC to lowlevel-dvc
tegra: disable IDDQ for PLL_X on Tegra124
tegra: power up additional partitions on Tegra124
tegra: fix MESLECT clock enable
tegra: change cpu internal reset layout for Tegra124
tegra: add Tegra124 PLL_X rate setup
tegra: apply cluster switch logic to all SoCs >=T30
tegra: hardcode entry address for main cluster
tegra: setup L2 cache on Tegra124
tegra: add architectural timer init
tegra: add Tegra124 Kconfig symbol
pinctrl: tegra30: introduce drvdata
pinctrl: tegra: add Tegra124 support
clk: tegra: allow variable sized muxes
clk: tegra: don't bug out on zero PLL postdiv
clk: tegra: add Tegra124 driver
mci: tegra: add Tegra124 compatible
tegra: pmc: add Tegra124 compatible
images: add Tegra124 image build rules
tegra: add NVIDIA Jetson-TK1 board support
tegra: refresh defconfig
Michael Olbrich (2):
ARM: mini2440: switch to env2
ARM: mini2440: update defconfig
Philipp Zabel (1):
ARM: AM335x: Beaglebone: Fix memory setup for Beaglebone black
Renaud Barbier (1):
mtd: delete partition erase size initialisation
Sascha Hauer (128):
dts: update to v3.15-rc4
pinctrl: i.MX iomux-v3: Print more context in error message
ARM: i.MX: bbu: remove dcd arguments from bbu registration
ARM: tqma53: Add barebox_update support
ARM: i.MX53: Use clock number defines from dt-bindings
ARM: tqma53: Add phy_type property to usb ports
ARM: i.MX53: Add pwm support
ARM: i.MX53 tqma53: Set model from devicetree
ARM: i.MX: implement pllv2 set/round_rate support
video: i.MX IPUv3: Implement i.MX5 IPU reset support
video: i.MX IPUv3 ldb: implement i.MX53 support
ARM: i.MX5: Add IPU clocks
ARM: dts: i.MX53: Add ipu alias
ARM: i.MX5: ccm: combine initcalls and drop ifdefs
ARM: i.MX: Phytec-phyCARD-i.MX27: Switch to multi-image support
ARM: create a imx_defconfig
ARM: i.MX: Phytec-phyCARD-i.MX27: Use upstream dts files
net: ifup: Set current ethernet device when doing ifup
net: Pass eth_device to net_receive
net: Allow to use multiple network interfaces at once
net: phy: Print ethernet device in the link information
net: take eth id from devicetree alias
ARM: am33xx: Pass uart_base to soft_reset function
ARM: am33xx: Add missing include
ARM: AM33xx: swap MLO SPI image automatically
ARM: AM33xx: Add SPI bbu handler
ARM: AM335x: phycore: change to defaultenv_append_directory
ARM: AM335x: beaglebone: change to defaultenv_append_directory
ARM: AM335x: merge am335x config in a single config file
net: cpsw: Pass correct slave
net: cpsw: register slaves as devices
net: cpsw: use slave device for dev_dbg
net: cpsw: Always write mac_control register
net: cpsw: Allow multiple slaves
mtd: partitions: only add write functions when mtd write support is enabled
eeprom: at25: Add dt probe support
mtd: m25p80: update Micron IDs
ARM: i.MX: iim: Check result of dev_request_mem_region
hush: setting variables may fail
mfd: mc13xxx: Allow to set callback for mc13xxx
spi: i.MX: Move to coredevice_initcall
mfd: mc13xxx: move to coredevice_initcall
ARM: i.MX51 babbage: use mc13xxx_register_callback to initialize PMIC
ARM: dts: i.MX51 babbage: overwrite upstream FEC iomux settings
ARM: dts: i.MX6dl-hummingboard: Use upstream dts file
ARM: dts: i.MX6q-gk802: Use upstream dts file
ARM: dts: i.MX6qdl-sabresd: Use upstream dts file
ARM: dts: i.MX6q-sabreslite: Use upstream dts file
ARM: dts: i.MX6qdl-dfi-fs700-m60: Use upstream dts file
ARM: dts: i.MX6qdl-microsom: Use upstream dts file
ARM: dts: i.MX6qdl-nitrogen6x: Use upstream dts file
ARM: dts: i.MX6: drop usage of pin group defines
ARM: dts: i.MX6: drop now unused imx6qdl-pingrp.h
dts: update to v3.15-rc5
complete: Fix completion after options
complete: Add devicetree completion
net: phy: factor out phy_device_attach function
net: phy: move setting of phy_map to phy_register_device
net: phy: register phys specified in devicetree
net: phy: Support finding a phy in the devicetree
net: phy: Support limiting phy speed in the devicetree
commands: add of_dump command
oftree: remove dump support
of: Drop devicetree merge support
oftree command: make devicetree file optargs to -l/-s
usb: chipidea i.MX: relax phy_type requirements
ARM: dts: i.MX: update stdout-path property
ARM: dts: i.MX53: include loacal imx53.dtsi file
net: orion-gbe: use transparent-to-driver of mdio functions
net: phy: remove now unused of_phy_device_connect
net: phy: genphy: always write MII_CTRL1000 when available
net: phy: genphy: Make it work with of_set_phy_supported
net: fec_imx: Add devicetree support for mdio bus
net: phy: micrel: Add kwz9031 support
net: phy: micrel: Add support for specifying pad skew values
ARM: i.MX: iim: introduce private data struct
ARM: i.MX: iim: Add namespace to functions
ARM: i.MX: iim: register iim device
ARM: i.MX: iim: pass private data struct to imx_iim_fuse_blow
ARM: i.MX: iim: pass private data struct to imx_iim_fuse_sense
ARM: i.MX: iim: use dev_* for messages
ARM: i.MX: iim: move static variables into driver struct
ARM: i.MX: iim: don't make detour over cdev API
ARM: i.MX: iim: make fuse blowing work on i.MX5
ARM: i.MX: iim: provide a MAC address convenience variable
ARM: i.MX: iim: Add regulator support
Merge branch 'for-next/doc'
Merge branch 'for-next/dts'
Merge branch 'for-next/iim'
Merge branch 'for-next/imx'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/net'
Merge branch 'for-next/net-of-phy'
Merge branch 'for-next/omap'
Merge branch 'for-next/openrisc'
Merge branch 'for-next/samsung'
Merge branch 'for-next/tegra'
Merge branch 'for-next/uemd'
Merge branch 'for-next/usb'
fix format specifiers
ARM: MXS: Remove unused variables
ARM: friendlyarm_mini2440: refresh defconfig
mips: dlink-dir-320: refresh defconfig
mips: ar9331: Add missing #address-cells/#size-cells properties
PPC: FSL DDR: Fix compiler warning
commands: drvinfo: Make locally used function static
gui: IMAGE_RENDERER does not depend on VIDEO
mips: Add builtin dtb to dtb-y
ARM: AM335x: Beaglebone: Use stripped down devicetree for MLO
Merge branch 'pu/warnings'
mtd: partition: Fix multi eraseregion chips
mtd: partition: implement lock/unlock
mii-tool: Fix string length
mii-tool: Fix gigabit link test
mii-tool: Fix gigabit advertise / link partner ability mixup
mips: Fix dtb build rules
Merge branch 'pu/mii-tool'
ARM: Phytec-phyCARD-imx27: Add missing compatible check
boot: Fix boot -m
net: ifup: skip *-discover files for ifup -a
ARM: imx_v7_defconfig: update
ARM: i.MX efika-sb: switch otg port to utmi mode
ifup: Add comment why xxx-discover files have to be skipped
kernel-install: fix return value check for getline
automount: check for recursive automount
ARM: i.MX6 Phytec phyFLEX: Add watchdog reset workaround
Release v2014.07.0
Wadim Egorov (2):
ARM: omap: barebox update nand xloadslots handler
phycore-am335x: Added bbu nand xloadslots handler
.gitignore | 6 +
Makefile | 2 +-
arch/arm/Kconfig | 32 +-
arch/arm/Makefile | 8 +-
arch/arm/boards/Makefile | 3 +
arch/arm/boards/beaglebone/Makefile | 1 +
arch/arm/boards/beaglebone/board.c | 20 +
.../{env => defaultenv-beaglebone}/boot/sd | 0
.../{env => defaultenv-beaglebone}/config | 0
arch/arm/boards/beaglebone/lowlevel.c | 12 +-
arch/arm/boards/boundarydevices-nitrogen6x/board.c | 2 +-
arch/arm/boards/ccxmx51/ccxmx51.c | 4 -
arch/arm/boards/ccxmx51/ccxmx51js.c | 4 -
arch/arm/boards/chumby_falconwing/falconwing.c | 2 +-
arch/arm/boards/crystalfontz-cfa10036/cfa10036.c | 2 +-
arch/arm/boards/datamodul-edm-qmx6/board.c | 5 +-
arch/arm/boards/dfi-fs700-m60/board.c | 4 +-
arch/arm/boards/efika-mx-smartbook/board.c | 8 +-
arch/arm/boards/embest-riotboard/board.c | 2 +-
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 10 +-
arch/arm/boards/freescale-mx51-babbage/board.c | 33 +-
arch/arm/boards/freescale-mx53-qsb/board.c | 6 +-
arch/arm/boards/freescale-mx53-vmx53/board.c | 7 +-
arch/arm/boards/freescale-mx6-sabrelite/board.c | 2 +-
arch/arm/boards/friendlyarm-mini2440/env/boot/nand | 9 +
arch/arm/boards/friendlyarm-mini2440/env/config | 54 -
.../boards/friendlyarm-mini2440/env/config-board | 16 +
.../friendlyarm-mini2440/env/init/mtdparts-nand | 11 +
arch/arm/boards/friendlyarm-tiny210/lowlevel.c | 4 -
arch/arm/boards/guf-cupid/board.c | 10 +-
arch/arm/boards/guf-santaro/board.c | 6 +-
arch/arm/boards/guf-vincell/board.c | 5 +-
arch/arm/boards/highbank/init.c | 2 +-
arch/arm/boards/imx233-olinuxino/imx23-olinuxino.c | 7 +-
arch/arm/boards/karo-tx53/board.c | 14 +-
arch/arm/boards/karo-tx53/dcd-data-1011.h | 94 -
arch/arm/boards/karo-tx53/dcd-data-xx30.h | 144 --
arch/arm/boards/module-mb7707/Makefile | 2 +
.../serial.c => arm/boards/module-mb7707/board.c} | 34 +-
arch/arm/boards/module-mb7707/lowlevel.c | 34 +
arch/arm/boards/module-mb7707/module-mb7707.dox | 29 +
arch/arm/boards/nvidia-beaver/Makefile | 3 +
.../boards/nvidia-beaver/beaver-2gb-emmc.bct.cfg | 819 +++++++
arch/arm/boards/nvidia-beaver/board.c | 38 +
arch/arm/boards/nvidia-jetson-tk1/Makefile | 7 +
arch/arm/boards/nvidia-jetson-tk1/entry.c | 39 +
.../nvidia-jetson-tk1/jetson-tk1-2gb-emmc.bct.cfg | 1287 +++++++++++
arch/arm/boards/phytec-phycard-imx27/lowlevel.c | 22 +-
arch/arm/boards/phytec-phycard-imx27/pca100.c | 16 +-
arch/arm/boards/phytec-phycore-am335x/Makefile | 1 +
arch/arm/boards/phytec-phycore-am335x/board.c | 11 +
.../{env => defaultenv-phycore-am335x}/boot/mmc | 0
.../{env => defaultenv-phycore-am335x}/boot/nand | 0
.../{env => defaultenv-phycore-am335x}/boot/spi | 0
.../config-board | 0
arch/arm/boards/phytec-phycore-am335x/lowlevel.c | 2 +-
arch/arm/boards/phytec-phycore-imx35/pcm043.c | 10 +-
arch/arm/boards/phytec-phyflex-imx6/board.c | 34 +
arch/arm/boards/phytec-phyflex-imx6/lowlevel.c | 12 +-
arch/arm/boards/sama5d3_xplained/Makefile | 1 +
arch/arm/boards/sama5d3_xplained/env/config | 42 +
arch/arm/boards/sama5d3_xplained/init.c | 238 +++
arch/arm/boards/solidrun-hummingboard/board.c | 13 +
arch/arm/boards/toradex-colibri-t20/Makefile | 4 +
.../colibri-t20_256_hsmmc.bct.cfg | 451 ++++
.../colibri-t20_256_v11_nand.bct.cfg | 459 ++++
.../colibri-t20_256_v12_nand.bct.cfg | 459 ++++
.../colibri-t20_512_hsmmc.bct.cfg | 451 ++++
.../colibri-t20_512_v11_nand.bct.cfg | 459 ++++
.../colibri-t20_512_v12_nand.bct.cfg | 459 ++++
arch/arm/boards/toradex-colibri-t20/entry.c | 42 +-
arch/arm/boards/tqma53/board.c | 15 +-
arch/arm/boards/tqma6x/board.c | 24 +-
arch/arm/configs/a9m2410_defconfig | 4 +-
arch/arm/configs/a9m2440_defconfig | 4 +-
arch/arm/configs/am335x_beaglebone_defconfig | 84 -
...c-phycore-am335x_defconfig => am335x_defconfig} | 29 +-
arch/arm/configs/animeo_ip_defconfig | 4 +-
arch/arm/configs/archosg9_defconfig | 4 +-
arch/arm/configs/at91rm9200ek_defconfig | 4 +-
arch/arm/configs/at91sam9260ek_defconfig | 4 +-
arch/arm/configs/at91sam9261ek_defconfig | 4 +-
.../configs/at91sam9261ek_first_stage_defconfig | 4 +-
arch/arm/configs/at91sam9263ek_defconfig | 4 +-
arch/arm/configs/at91sam9g10ek_defconfig | 4 +-
arch/arm/configs/at91sam9g20ek_defconfig | 4 +-
arch/arm/configs/at91sam9m10g45ek_defconfig | 4 +-
arch/arm/configs/at91sam9m10ihd_defconfig | 4 +-
arch/arm/configs/at91sam9n12ek_defconfig | 4 +-
arch/arm/configs/at91sam9x5ek_defconfig | 4 +-
arch/arm/configs/ccmx51_defconfig | 4 +-
arch/arm/configs/chumbyone_defconfig | 6 +-
arch/arm/configs/cupid_defconfig | 4 +-
arch/arm/configs/datamodul-edm-qmx6_defconfig | 4 +-
arch/arm/configs/dss11_defconfig | 4 +-
arch/arm/configs/edb93xx_defconfig | 4 +-
arch/arm/configs/efika-mx-smartbook_defconfig | 4 +-
arch/arm/configs/eukrea_cpuimx25_defconfig | 4 +-
arch/arm/configs/eukrea_cpuimx27_defconfig | 4 +-
arch/arm/configs/eukrea_cpuimx35_defconfig | 4 +-
arch/arm/configs/eukrea_cpuimx51_defconfig | 4 +-
arch/arm/configs/freescale-mx21-ads_defconfig | 4 +-
arch/arm/configs/freescale-mx25-3ds_defconfig | 4 +-
arch/arm/configs/freescale-mx27-ads_defconfig | 4 +-
arch/arm/configs/freescale-mx28-evk_defconfig | 4 +-
arch/arm/configs/freescale-mx35-3ds_defconfig | 4 +-
arch/arm/configs/freescale-mx51-babbage_defconfig | 4 +-
arch/arm/configs/freescale-mx53-qsb_defconfig | 4 +-
arch/arm/configs/freescale-mx53-smd_defconfig | 4 +-
arch/arm/configs/freescale-mx6-arm2_defconfig | 4 +-
arch/arm/configs/freescale-mx6-sabrelite_defconfig | 4 +-
arch/arm/configs/freescale-mx6-sabresd_defconfig | 4 +-
arch/arm/configs/friendlyarm_mini2440_defconfig | 34 +-
arch/arm/configs/friendlyarm_mini6410_defconfig | 4 +-
arch/arm/configs/friendlyarm_tiny6410_defconfig | 4 +-
arch/arm/configs/highbank_defconfig | 4 +-
arch/arm/configs/imx233-olinuxino_defconfig | 4 +-
...hytec-phycard-imx27_defconfig => imx_defconfig} | 42 +-
arch/arm/configs/imx_v7_defconfig | 84 +-
arch/arm/configs/mioa701_defconfig | 2 +-
arch/arm/configs/mmccpu_defconfig | 4 +-
arch/arm/configs/module-mb7707_defconfig | 49 +
arch/arm/configs/neso_defconfig | 4 +-
arch/arm/configs/netx_nxdb500_defconfig | 4 +-
arch/arm/configs/nhk8815_defconfig | 4 +-
.../configs/omap3430_sdp3430_per_uart_defconfig | 2 +-
arch/arm/configs/omap3530_beagle_defconfig | 4 +-
arch/arm/configs/omap3_evm_defconfig | 2 +-
arch/arm/configs/panda_defconfig | 4 +-
arch/arm/configs/phytec-phycard-omap3_defconfig | 10 +-
arch/arm/configs/phytec-phycard-omap4_defconfig | 6 +-
arch/arm/configs/phytec-phycore-imx27_defconfig | 4 +-
arch/arm/configs/phytec-phycore-imx31_defconfig | 4 +-
arch/arm/configs/phytec-phycore-imx35_defconfig | 4 +-
arch/arm/configs/phytec-phycore-omap4460_defconfig | 4 +-
arch/arm/configs/phytec-phycore-pxa270_defconfig | 4 +-
arch/arm/configs/pm9261_defconfig | 4 +-
arch/arm/configs/pm9263_defconfig | 4 +-
arch/arm/configs/pm9g45_defconfig | 4 +-
arch/arm/configs/qil_a9260_128mib_defconfig | 4 +-
arch/arm/configs/qil_a9260_defconfig | 4 +-
arch/arm/configs/qil_a9g20_128mib_defconfig | 4 +-
arch/arm/configs/qil_a9g20_defconfig | 4 +-
arch/arm/configs/rockchip_defconfig | 4 +-
...25stk5_defconfig => sama5d3_xplained_defconfig} | 75 +-
arch/arm/configs/sama5d3xek_defconfig | 4 +-
arch/arm/configs/scb9328_defconfig | 4 +-
arch/arm/configs/socfpga_defconfig | 4 +-
arch/arm/configs/solidrun_cubox_defconfig | 2 +-
arch/arm/configs/tegra_v7_defconfig | 22 +-
arch/arm/configs/telit_evk_pro3_defconfig | 4 +-
arch/arm/configs/tny_a9260_defconfig | 4 +-
arch/arm/configs/tny_a9263_defconfig | 4 +-
arch/arm/configs/tny_a9g20_defconfig | 4 +-
arch/arm/configs/tqma53_defconfig | 4 +-
arch/arm/configs/tx28stk5_defconfig | 2 +-
arch/arm/configs/tx51stk5_defconfig | 8 +-
arch/arm/configs/tx53stk5_defconfig | 4 +-
arch/arm/configs/usb_a9260_defconfig | 4 +-
arch/arm/configs/usb_a9263_128mib_defconfig | 4 +-
arch/arm/configs/usb_a9263_defconfig | 4 +-
arch/arm/configs/usb_a9g20_128mib_defconfig | 4 +-
arch/arm/configs/usb_a9g20_defconfig | 4 +-
arch/arm/configs/versatilepb_defconfig | 4 +-
arch/arm/configs/vexpress_ca9_defconfig | 4 +-
arch/arm/configs/vexpress_defconfig | 4 +-
arch/arm/configs/vincell_defconfig | 4 +-
arch/arm/configs/zedboard_defconfig | 2 +-
arch/arm/cpu/cpu.c | 2 +-
arch/arm/cpu/cpuinfo.c | 3 +-
arch/arm/cpu/dtb.c | 2 +-
arch/arm/cpu/mmuinfo.c | 13 +-
arch/arm/cpu/start-pbl.c | 3 -
arch/arm/cpu/uncompress.c | 3 -
arch/arm/dts/Makefile | 8 +-
arch/arm/dts/am335x-bone-common.dts | 9 +
arch/arm/dts/am335x-bone-common.dtsi | 5 -
arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts | 2 +-
arch/arm/dts/imx27-phytec-phycard-s-rdk.dts | 164 --
arch/arm/dts/imx27-phytec-phycard-s-som.dtsi | 103 -
arch/arm/dts/imx27.dtsi | 11 -
arch/arm/dts/imx51-babbage.dts | 38 +-
arch/arm/dts/imx51-genesi-efika-sb.dts | 4 +-
arch/arm/dts/imx53-mba53.dts | 8 +
arch/arm/dts/imx53-qsb-common.dtsi | 2 +-
arch/arm/dts/imx53-qsb.dts | 1 +
arch/arm/dts/imx53-qsrb.dts | 1 +
arch/arm/dts/imx53-voipac-bsb.dts | 1 +
arch/arm/dts/imx53.dtsi | 8 +-
arch/arm/dts/imx6dl-hummingboard.dts | 79 -
arch/arm/dts/imx6q-gk802.dts | 143 +-
arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi | 49 +-
arch/arm/dts/imx6q-var-custom.dts | 28 +-
arch/arm/dts/imx6q-var-som.dtsi | 43 +-
arch/arm/dts/imx6qdl-dfi-fs700-m60.dtsi | 142 +-
arch/arm/dts/imx6qdl-mba6x.dtsi | 9 +-
arch/arm/dts/imx6qdl-microsom.dtsi | 79 +-
arch/arm/dts/imx6qdl-nitrogen6x.dtsi | 378 +---
arch/arm/dts/imx6qdl-phytec-pfla02.dtsi | 2 +-
arch/arm/dts/imx6qdl-pingrp.h | 532 -----
arch/arm/dts/imx6qdl-sabrelite.dtsi | 379 +---
arch/arm/dts/imx6qdl-sabresd.dtsi | 288 +--
arch/arm/dts/imx6qdl-tqma6x.dtsi | 48 +-
arch/arm/dts/imx6qdl-udoo.dtsi | 37 +-
arch/arm/dts/imx6qdl.dtsi | 1 -
arch/arm/dts/imx6s-riotboard.dts | 5 +-
arch/arm/dts/k1879hb1ya.dtsi | 37 +
arch/arm/dts/module-mb7707.dts | 24 +
arch/arm/dts/tegra124-jetson-tk1.dts | 1828 ++++++++++++++++
arch/arm/dts/tegra124.dtsi | 1 +
arch/arm/dts/tegra30-beaver.dts | 10 +
arch/arm/lib/armlinux.c | 2 +-
arch/arm/lib/bootm.c | 6 +-
arch/arm/lib/bootu.c | 4 +-
arch/arm/lib/bootz.c | 9 +-
arch/arm/lib/pbl.lds.S | 5 -
arch/arm/mach-at91/Kconfig | 23 +-
arch/arm/mach-at91/boot_test_cmd.c | 9 +-
arch/arm/mach-at91/clock.c | 9 +-
arch/arm/mach-at91/gpio.c | 12 +-
arch/arm/mach-at91/include/mach/atmel_hlcdc.h | 3 -
arch/arm/mach-highbank/cache-l2x0.c | 5 -
arch/arm/mach-imx/Kconfig | 18 +-
arch/arm/mach-imx/clk-imx5.c | 316 ++-
arch/arm/mach-imx/clk-pllv2.c | 66 +
arch/arm/mach-imx/iim.c | 330 ++-
arch/arm/mach-imx/imx-bbu-internal.c | 263 +--
arch/arm/mach-imx/include/mach/bbu.h | 43 +-
arch/arm/mach-imx/include/mach/imx51-regs.h | 2 +
arch/arm/mach-imx/include/mach/imx53-regs.h | 1 +
arch/arm/mach-mxs/bcb.c | 9 +-
arch/arm/mach-mxs/usb-imx28.c | 3 -
arch/arm/mach-netx/generic.c | 4 +-
arch/arm/mach-omap/Kconfig | 17 +-
arch/arm/mach-omap/Makefile | 1 +
arch/arm/mach-omap/am33xx_bbu_nand_xloadslots.c | 122 ++
arch/arm/mach-omap/am33xx_bbu_spi_mlo.c | 71 +-
arch/arm/mach-omap/am33xx_generic.c | 22 +-
arch/arm/mach-omap/boot_order.c | 13 +-
arch/arm/mach-omap/dmtimer0.c | 4 -
arch/arm/mach-omap/include/mach/am33xx-clock.h | 4 -
arch/arm/mach-omap/include/mach/am33xx-generic.h | 1 +
arch/arm/mach-omap/include/mach/am33xx-silicon.h | 2 +-
arch/arm/mach-omap/include/mach/bbu.h | 19 +
arch/arm/mach-samsung/Kconfig | 1 +
arch/arm/mach-tegra/Kconfig | 10 +
arch/arm/mach-tegra/include/mach/iomap.h | 3 +
arch/arm/mach-tegra/include/mach/lowlevel-dvc.h | 61 +-
arch/arm/mach-tegra/include/mach/lowlevel.h | 64 +-
arch/arm/mach-tegra/include/mach/tegra114-sysctr.h | 30 +
arch/arm/mach-tegra/include/mach/tegra124-car.h | 19 +
arch/arm/mach-tegra/include/mach/tegra20-pmc.h | 4 +
arch/arm/mach-tegra/include/mach/tegra30-car.h | 4 +
arch/arm/mach-tegra/tegra20-pmc.c | 24 +
arch/arm/mach-tegra/tegra20.c | 31 +-
arch/arm/mach-tegra/tegra_avp_init.c | 82 +-
arch/arm/mach-tegra/tegra_maincomplex_init.c | 14 +-
arch/arm/mach-uemd/Kconfig | 16 +
arch/arm/mach-uemd/Makefile | 1 +
arch/arm/mach-uemd/include/mach/debug_ll.h | 42 +
arch/arm/mach-uemd/include/mach/hardware.h | 7 +
arch/arm/mach-uemd/reset.c | 24 +
arch/blackfin/boards/ipe337/cmd_alternate.c | 10 +-
arch/blackfin/configs/ipe337_defconfig | 4 +-
arch/mips/Makefile | 5 -
arch/mips/boards/dlink-dir-320/Makefile | 1 -
arch/mips/boards/dlink-dir-320/board.c | 25 +-
arch/mips/boot/dtb.c | 2 +-
arch/mips/configs/dlink-dir-320_defconfig | 63 +-
arch/mips/configs/loongson-ls1b_defconfig | 2 +-
arch/mips/configs/qemu-malta_defconfig | 6 +-
arch/mips/configs/ritmix-rzx50_defconfig | 2 +-
arch/mips/dts/.gitignore | 1 +
arch/mips/dts/Makefile | 11 +-
arch/mips/dts/ar9331.dtsi | 2 +
arch/mips/dts/dlink-dir-320.dts | 32 +
arch/mips/lib/cpuinfo.c | 3 +-
arch/nios2/configs/generic_defconfig | 2 +-
arch/nios2/lib/libgcc.c | 4 -
arch/openrisc/configs/generic_defconfig | 4 +-
arch/openrisc/cpu/start.S | 61 +-
arch/openrisc/include/asm/spr-defs.h | 13 +-
arch/openrisc/lib/ashrdi3.S | 4 -
arch/openrisc/lib/cpuinfo.c | 53 +-
arch/ppc/configs/da923rc_defconfig | 4 +-
arch/ppc/configs/p1022ds_defconfig | 2 +-
arch/ppc/configs/p2020rdb_defconfig | 2 +-
arch/ppc/configs/pcm030_defconfig | 4 +-
arch/ppc/include/asm/fsl_ddr_sdram.h | 2 +-
arch/ppc/mach-mpc85xx/eth-devices.c | 4 -
arch/ppc/mach-mpc85xx/include/mach/gianfar.h | 5 -
arch/sandbox/configs/sandbox_defconfig | 4 +-
commands/2048.c | 9 +-
commands/Kconfig | 2257 +++++++++++++++-----
commands/Makefile | 6 +-
commands/automount.c | 13 +-
commands/barebox-update.c | 18 +-
commands/basename.c | 10 +-
commands/boot.c | 47 +-
commands/bootm.c | 35 +-
commands/cat.c | 9 +-
commands/cd.c | 8 +-
commands/clear.c | 7 +-
commands/clk.c | 45 +-
commands/cp.c | 10 +-
commands/crc.c | 21 +-
commands/detect.c | 12 +-
commands/devinfo.c | 69 +-
commands/dfu.c | 28 +-
commands/digest.c | 28 +-
commands/dirname.c | 14 +-
commands/drvinfo.c | 47 +
commands/echo.c | 17 +-
commands/edit.c | 7 +-
commands/exec.c | 3 +-
commands/export.c | 7 +-
commands/false.c | 3 +-
commands/filetype.c | 15 +-
commands/flash.c | 43 +-
commands/global.c | 11 +-
commands/go.c | 15 +-
commands/gpio.c | 40 +-
commands/help.c | 112 +-
commands/i2c.c | 51 +-
commands/insmod.c | 8 +-
commands/iomemport.c | 6 +-
commands/led.c | 12 +-
commands/let.c | 44 +-
commands/linux16.c | 17 +-
commands/linux_exec.c | 11 +-
commands/ln.c | 13 +-
commands/loadb.c | 20 +-
commands/loadenv.c | 16 +-
commands/loads.c | 21 +-
commands/loadxy.c | 53 +-
commands/login.c | 17 +-
commands/ls.c | 13 +-
commands/lsmod.c | 3 +-
commands/magicvar.c | 33 +-
commands/md.c | 38 +-
commands/memcmp.c | 29 +-
commands/memcpy.c | 23 +-
commands/meminfo.c | 3 +-
commands/memset.c | 21 +-
commands/memtest.c | 19 +-
commands/menu.c | 55 +-
commands/menutree.c | 37 +-
commands/miitool.c | 20 +-
commands/mkdir.c | 13 +-
commands/mm.c | 20 +-
commands/mount.c | 27 +-
commands/msleep.c | 4 +-
commands/mw.c | 19 +-
commands/nand.c | 16 +-
commands/nandtest.c | 22 +-
commands/net.c | 8 +-
commands/of_dump.c | 108 +
commands/of_node.c | 12 +-
commands/of_property.c | 23 +-
commands/oftree.c | 109 +-
commands/partition.c | 27 +-
commands/passwd.c | 14 +-
commands/poweroff.c | 6 +-
commands/printenv.c | 9 +-
commands/pwd.c | 3 +-
commands/readf.c | 11 +-
commands/readline.c | 11 +-
commands/readlink.c | 14 +-
commands/reginfo.c | 3 +-
commands/regulator.c | 3 +-
commands/reset.c | 9 +-
commands/rm.c | 12 +-
commands/rmdir.c | 11 +-
commands/saveenv.c | 13 +-
commands/setenv.c | 10 +-
commands/sleep.c | 4 +-
commands/spi.c | 25 +-
commands/splash.c | 20 +-
commands/stddev.c | 4 -
commands/test.c | 15 +-
commands/tftp.c | 10 +-
commands/time.c | 9 +-
commands/timeout.c | 21 +-
commands/trigger.c | 13 +-
commands/true.c | 3 +-
commands/ubi.c | 43 +-
commands/ubiformat.c | 48 +-
commands/uimage.c | 16 +-
commands/umount.c | 11 +-
commands/uncompress.c | 11 +-
commands/usb.c | 11 +-
commands/usbserial.c | 29 +-
commands/version.c | 3 +-
commands/wd.c | 11 +-
common/Kconfig | 27 +-
common/blspec.c | 2 +-
common/bootm.c | 14 +-
common/command.c | 34 +-
common/complete.c | 76 +
common/dlmalloc.c | 8 +-
common/filetype.c | 20 +-
common/hush.c | 79 +-
common/partitions/efi.h | 4 -
common/tlsf_malloc.c | 2 +-
common/uimage.c | 4 +-
crypto/crc16.c | 4 -
drivers/Kconfig | 1 +
drivers/Makefile | 1 +
drivers/ata/ahci.c | 5 -
drivers/ata/ahci.h | 5 -
drivers/clk/tegra/Makefile | 1 +
drivers/clk/tegra/clk-periph.c | 52 +-
drivers/clk/tegra/clk-pll.c | 2 -
drivers/clk/tegra/clk-tegra124.c | 349 +++
drivers/clk/tegra/clk-tegra20.c | 16 +
drivers/clk/tegra/clk-tegra30.c | 19 +
drivers/clk/tegra/clk.c | 145 +-
drivers/clk/tegra/clk.h | 18 +
drivers/clocksource/Kconfig | 4 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/uemd.c | 130 ++
drivers/eeprom/at25.c | 102 +-
drivers/gpio/gpiolib.c | 17 +-
drivers/i2c/busses/Kconfig | 4 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-tegra.c | 699 ++++++
drivers/mci/dw_mmc.c | 4 -
drivers/mci/mci-core.c | 5 +-
drivers/mci/mmci.c | 4 -
drivers/mci/tegra-sdmmc.c | 39 +-
drivers/mfd/mc13xxx.c | 50 +-
drivers/mtd/core.c | 4 +-
drivers/mtd/devices/m25p80.c | 6 +-
drivers/mtd/nand/nand_bch.c | 3 -
drivers/mtd/nand/nand_ecc.c | 4 -
drivers/mtd/nand/nand_imx_bbm.c | 7 +-
drivers/mtd/nand/nand_s3c24xx.c | 8 +-
drivers/mtd/nor/cfi_flash.c | 11 +-
drivers/mtd/partition.c | 79 +-
drivers/mtd/ubi/attach.c | 4 -
drivers/mtd/ubi/build.c | 4 -
drivers/mtd/ubi/debug.c | 4 -
drivers/mtd/ubi/debug.h | 4 -
drivers/mtd/ubi/eba.c | 4 -
drivers/mtd/ubi/io.c | 4 -
drivers/mtd/ubi/kapi.c | 4 -
drivers/mtd/ubi/misc.c | 4 -
drivers/mtd/ubi/ubi-media.h | 4 -
drivers/mtd/ubi/ubi.h | 4 -
drivers/mtd/ubi/upd.c | 4 -
drivers/mtd/ubi/vmt.c | 4 -
drivers/mtd/ubi/vtbl.c | 4 -
drivers/mtd/ubi/wl.c | 4 -
drivers/net/Kconfig | 1 +
drivers/net/altera_tse.c | 2 +-
drivers/net/ar231x.c | 2 +-
drivers/net/arc_emac.c | 30 +-
drivers/net/at91_ether.c | 2 +-
drivers/net/cpsw.c | 73 +-
drivers/net/cs8900.c | 2 +-
drivers/net/davinci_emac.c | 2 +-
drivers/net/designware.c | 6 +-
drivers/net/designware.h | 4 -
drivers/net/dm9k.c | 2 +-
drivers/net/ep93xx.c | 2 +-
drivers/net/ethoc.c | 59 +-
drivers/net/fec_imx.c | 7 +-
drivers/net/fec_mpc5200.c | 2 +-
drivers/net/gianfar.c | 2 +-
drivers/net/ks8851_mll.c | 2 +-
drivers/net/ksz8864rmn.c | 5 -
drivers/net/macb.c | 4 +-
drivers/net/netx_eth.c | 2 +-
drivers/net/orion-gbe.c | 64 +-
drivers/net/phy/mdio-mvebu.c | 1 +
drivers/net/phy/mdio_bus.c | 107 +-
drivers/net/phy/micrel.c | 93 +
drivers/net/phy/phy.c | 171 +-
drivers/net/smc91111.c | 2 +-
drivers/net/smc911x.c | 2 +-
drivers/net/smc911x.h | 4 -
drivers/net/tap.c | 2 +-
drivers/net/usb/asix.c | 2 +-
drivers/net/usb/smsc95xx.c | 4 +-
drivers/net/usb/usbnet.c | 2 +-
drivers/net/xgmac.c | 2 +-
drivers/of/fdt.c | 44 +-
drivers/pinctrl/Kconfig | 2 +-
drivers/pinctrl/imx-iomux-v3.c | 3 +-
drivers/pinctrl/pinctrl-tegra30.c | 444 +++-
drivers/reset/Kconfig | 13 +
drivers/reset/Makefile | 1 +
drivers/reset/core.c | 236 ++
drivers/spi/imx_spi.c | 2 +-
drivers/spi/omap3_spi.c | 29 +-
drivers/spi/omap3_spi.h | 5 +-
drivers/usb/gadget/u_serial.c | 1 +
drivers/usb/imx/chipidea-imx.c | 19 +-
drivers/video/atmel_hlcdfb.c | 4 -
drivers/video/atmel_lcdfb.c | 4 -
drivers/video/atmel_lcdfb_core.c | 4 -
drivers/video/fb.c | 7 +-
drivers/video/imx-ipu-v3/imx-ldb.c | 31 +-
drivers/video/imx-ipu-v3/ipu-common.c | 29 +
dts/Bindings/arm/arch_timer.txt | 3 +
dts/Bindings/ata/apm-xgene.txt | 3 +
dts/Bindings/net/arc_emac.txt | 12 +-
dts/Bindings/net/socfpga-dwmac.txt | 2 +-
dts/Bindings/net/stmmac.txt | 2 +-
dts/Bindings/pinctrl/pinctrl-st.txt | 4 +-
dts/Bindings/sound/davinci-mcasp-audio.txt | 2 +-
dts/Bindings/sound/tlv320aic31xx.txt | 6 +-
dts/src/arm/am33xx.dtsi | 4 +-
dts/src/arm/am4372.dtsi | 4 +-
dts/src/arm/stih415-pinctrl.dtsi | 10 +-
dts/src/arm/stih416-pinctrl.dtsi | 10 +-
dts/src/arm64/apm-storm.dtsi | 3 +
dts/src/xtensa/kc705.dts | 11 +
dts/src/xtensa/xtfpga-flash-128m.dtsi | 28 +
dts/src/xtensa/xtfpga-flash-16m.dtsi | 48 +-
dts/src/xtensa/xtfpga-flash-4m.dtsi | 32 +-
dts/src/xtensa/xtfpga.dtsi | 37 +-
dts/testcase-data/tests-interrupts.dtsi | 13 +
fs/fs.c | 10 +-
images/.gitignore | 6 +
images/Makefile | 3 +-
images/Makefile.imx | 4 +
images/Makefile.tegra | 89 +-
include/command.h | 29 +-
include/complete.h | 5 +-
include/linux/phy.h | 36 +-
include/linux/reset-controller.h | 50 +
include/linux/reset.h | 67 +
include/mci.h | 1 +
include/mfd/mc13xxx.h | 6 +
include/net.h | 5 +-
include/of.h | 2 +-
include/param.h | 9 +
include/usb/usb.h | 5 -
lib/decompress_bunzip2.c | 2 +-
lib/gui/Kconfig | 1 -
lib/parameter.c | 29 +
lib/vsprintf.c | 11 +-
net/Kconfig | 15 -
net/Makefile | 4 +-
net/dhcp.c | 32 +-
net/dns.c | 11 +-
net/eth.c | 71 +-
net/ifup.c | 24 +-
net/net.c | 23 +-
net/nfs.c | 9 +-
net/ping.c | 4 +-
scripts/Makefile | 3 +-
scripts/Makefile.lib | 6 +
scripts/kernel-install.c | 2 +-
...mk-am35xx-spi-image.c => mk-am3xxx-spi-image.c} | 52 +-
scripts/tegra/Makefile | 22 +
scripts/tegra/aes_ref.c | 326 +++
scripts/tegra/bct_dump.c | 296 +++
scripts/tegra/cbootimage.c | 242 +++
scripts/tegra/cbootimage.h | 108 +
scripts/tegra/context.c | 42 +
scripts/tegra/context.h | 28 +
scripts/tegra/crypto.c | 299 +++
scripts/tegra/crypto.h | 47 +
scripts/tegra/data_layout.c | 898 ++++++++
scripts/tegra/data_layout.h | 55 +
scripts/tegra/nvaes_ref.h | 35 +
scripts/tegra/parse.c | 803 +++++++
scripts/tegra/parse.h | 923 ++++++++
scripts/tegra/set.c | 206 ++
scripts/tegra/set.h | 49 +
scripts/tegra/t114/nvbctlib_t114.c | 1103 ++++++++++
scripts/tegra/t114/nvboot_bct_t114.h | 363 ++++
scripts/tegra/t114/nvboot_sdram_param_t114.h | 806 +++++++
scripts/tegra/t114/parse_t114.c | 430 ++++
scripts/tegra/t124/nvbctlib_t124.c | 1104 ++++++++++
scripts/tegra/t124/nvboot_bct_t124.h | 359 ++++
scripts/tegra/t124/nvboot_sdram_param_t124.h | 803 +++++++
scripts/tegra/t124/parse_t124.c | 429 ++++
scripts/tegra/t20/nvbctlib_t20.c | 684 ++++++
scripts/tegra/t20/nvboot_bct_t20.h | 316 +++
scripts/tegra/t20/nvboot_sdram_param_t20.h | 363 ++++
scripts/tegra/t20/parse_t20.c | 251 +++
scripts/tegra/t30/nvbctlib_t30.c | 891 ++++++++
scripts/tegra/t30/nvboot_bct_t30.h | 379 ++++
scripts/tegra/t30/nvboot_sdram_param_t30.h | 568 +++++
scripts/tegra/t30/parse_t30.c | 360 ++++
588 files changed, 29952 insertions(+), 6122 deletions(-)
rename arch/arm/boards/beaglebone/{env => defaultenv-beaglebone}/boot/sd (100%)
rename arch/arm/boards/beaglebone/{env => defaultenv-beaglebone}/config (100%)
create mode 100644 arch/arm/boards/friendlyarm-mini2440/env/boot/nand
delete mode 100644 arch/arm/boards/friendlyarm-mini2440/env/config
create mode 100644 arch/arm/boards/friendlyarm-mini2440/env/config-board
create mode 100644 arch/arm/boards/friendlyarm-mini2440/env/init/mtdparts-nand
delete mode 100644 arch/arm/boards/karo-tx53/dcd-data-1011.h
delete mode 100644 arch/arm/boards/karo-tx53/dcd-data-xx30.h
create mode 100644 arch/arm/boards/module-mb7707/Makefile
rename arch/{mips/boards/dlink-dir-320/serial.c => arm/boards/module-mb7707/board.c} (56%)
create mode 100644 arch/arm/boards/module-mb7707/lowlevel.c
create mode 100644 arch/arm/boards/module-mb7707/module-mb7707.dox
create mode 100644 arch/arm/boards/nvidia-beaver/beaver-2gb-emmc.bct.cfg
create mode 100644 arch/arm/boards/nvidia-beaver/board.c
create mode 100644 arch/arm/boards/nvidia-jetson-tk1/Makefile
create mode 100644 arch/arm/boards/nvidia-jetson-tk1/entry.c
create mode 100644 arch/arm/boards/nvidia-jetson-tk1/jetson-tk1-2gb-emmc.bct.cfg
rename arch/arm/boards/phytec-phycore-am335x/{env => defaultenv-phycore-am335x}/boot/mmc (100%)
rename arch/arm/boards/phytec-phycore-am335x/{env => defaultenv-phycore-am335x}/boot/nand (100%)
rename arch/arm/boards/phytec-phycore-am335x/{env => defaultenv-phycore-am335x}/boot/spi (100%)
rename arch/arm/boards/phytec-phycore-am335x/{env => defaultenv-phycore-am335x}/config-board (100%)
create mode 100644 arch/arm/boards/sama5d3_xplained/Makefile
create mode 100644 arch/arm/boards/sama5d3_xplained/env/config
create mode 100644 arch/arm/boards/sama5d3_xplained/init.c
create mode 100644 arch/arm/boards/toradex-colibri-t20/colibri-t20_256_hsmmc.bct.cfg
create mode 100644 arch/arm/boards/toradex-colibri-t20/colibri-t20_256_v11_nand.bct.cfg
create mode 100644 arch/arm/boards/toradex-colibri-t20/colibri-t20_256_v12_nand.bct.cfg
create mode 100644 arch/arm/boards/toradex-colibri-t20/colibri-t20_512_hsmmc.bct.cfg
create mode 100644 arch/arm/boards/toradex-colibri-t20/colibri-t20_512_v11_nand.bct.cfg
create mode 100644 arch/arm/boards/toradex-colibri-t20/colibri-t20_512_v12_nand.bct.cfg
delete mode 100644 arch/arm/configs/am335x_beaglebone_defconfig
rename arch/arm/configs/{phytec-phycore-am335x_defconfig => am335x_defconfig} (79%)
rename arch/arm/configs/{phytec-phycard-imx27_defconfig => imx_defconfig} (72%)
create mode 100644 arch/arm/configs/module-mb7707_defconfig
rename arch/arm/configs/{tx25stk5_defconfig => sama5d3_xplained_defconfig} (51%)
create mode 100644 arch/arm/dts/am335x-bone-common.dts
delete mode 100644 arch/arm/dts/imx27-phytec-phycard-s-rdk.dts
delete mode 100644 arch/arm/dts/imx27-phytec-phycard-s-som.dtsi
delete mode 100644 arch/arm/dts/imx27.dtsi
delete mode 100644 arch/arm/dts/imx6qdl-pingrp.h
create mode 100644 arch/arm/dts/k1879hb1ya.dtsi
create mode 100644 arch/arm/dts/module-mb7707.dts
create mode 100644 arch/arm/dts/tegra124-jetson-tk1.dts
create mode 100644 arch/arm/dts/tegra124.dtsi
create mode 100644 arch/arm/mach-omap/am33xx_bbu_nand_xloadslots.c
create mode 100644 arch/arm/mach-tegra/include/mach/tegra114-sysctr.h
create mode 100644 arch/arm/mach-tegra/include/mach/tegra124-car.h
create mode 100644 arch/arm/mach-uemd/Kconfig
create mode 100644 arch/arm/mach-uemd/Makefile
create mode 100644 arch/arm/mach-uemd/include/mach/debug_ll.h
create mode 100644 arch/arm/mach-uemd/include/mach/hardware.h
create mode 100644 arch/arm/mach-uemd/reset.c
create mode 100644 arch/mips/dts/.gitignore
create mode 100644 arch/mips/dts/dlink-dir-320.dts
create mode 100644 commands/drvinfo.c
create mode 100644 commands/of_dump.c
create mode 100644 drivers/clk/tegra/clk-tegra124.c
create mode 100644 drivers/clocksource/uemd.c
create mode 100644 drivers/i2c/busses/i2c-tegra.c
create mode 100644 drivers/reset/Kconfig
create mode 100644 drivers/reset/Makefile
create mode 100644 drivers/reset/core.c
create mode 100644 dts/src/xtensa/kc705.dts
create mode 100644 dts/src/xtensa/xtfpga-flash-128m.dtsi
create mode 100644 include/linux/reset-controller.h
create mode 100644 include/linux/reset.h
rename scripts/{mk-am35xx-spi-image.c => mk-am3xxx-spi-image.c} (77%)
create mode 100644 scripts/tegra/Makefile
create mode 100644 scripts/tegra/aes_ref.c
create mode 100644 scripts/tegra/bct_dump.c
create mode 100644 scripts/tegra/cbootimage.c
create mode 100644 scripts/tegra/cbootimage.h
create mode 100644 scripts/tegra/context.c
create mode 100644 scripts/tegra/context.h
create mode 100644 scripts/tegra/crypto.c
create mode 100644 scripts/tegra/crypto.h
create mode 100644 scripts/tegra/data_layout.c
create mode 100644 scripts/tegra/data_layout.h
create mode 100644 scripts/tegra/nvaes_ref.h
create mode 100644 scripts/tegra/parse.c
create mode 100644 scripts/tegra/parse.h
create mode 100644 scripts/tegra/set.c
create mode 100644 scripts/tegra/set.h
create mode 100644 scripts/tegra/t114/nvbctlib_t114.c
create mode 100644 scripts/tegra/t114/nvboot_bct_t114.h
create mode 100644 scripts/tegra/t114/nvboot_sdram_param_t114.h
create mode 100644 scripts/tegra/t114/parse_t114.c
create mode 100644 scripts/tegra/t124/nvbctlib_t124.c
create mode 100644 scripts/tegra/t124/nvboot_bct_t124.h
create mode 100644 scripts/tegra/t124/nvboot_sdram_param_t124.h
create mode 100644 scripts/tegra/t124/parse_t124.c
create mode 100644 scripts/tegra/t20/nvbctlib_t20.c
create mode 100644 scripts/tegra/t20/nvboot_bct_t20.h
create mode 100644 scripts/tegra/t20/nvboot_sdram_param_t20.h
create mode 100644 scripts/tegra/t20/parse_t20.c
create mode 100644 scripts/tegra/t30/nvbctlib_t30.c
create mode 100644 scripts/tegra/t30/nvboot_bct_t30.h
create mode 100644 scripts/tegra/t30/nvboot_sdram_param_t30.h
create mode 100644 scripts/tegra/t30/parse_t30.c
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2014-07-04 15:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140704151533.GA23235@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox