From: Sascha Hauer <s.hauer@pengutronix.de>
To: Antony Pavlov <antonynpavlov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [RFC 2/5] add rtc support
Date: Thu, 10 Jul 2014 23:40:30 +0200 [thread overview]
Message-ID: <20140710214030.GH23235@pengutronix.de> (raw)
In-Reply-To: <1404981199-21293-3-git-send-email-antonynpavlov@gmail.com>
On Thu, Jul 10, 2014 at 12:33:16PM +0400, Antony Pavlov wrote:
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> ---
> drivers/Kconfig | 1 +
> drivers/Makefile | 1 +
> drivers/rtc/Kconfig | 16 +++++++++++++
> drivers/rtc/Makefile | 6 +++++
> drivers/rtc/class.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/rtc/rtc-lib.c | 64 +++++++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/rtc.h | 46 ++++++++++++++++++++++++++++++++++++
> include/rtc.h | 2 ++
> 8 files changed, 198 insertions(+)
>
> diff --git a/drivers/Kconfig b/drivers/Kconfig
> index 12a9d8c..d38032c 100644
> --- a/drivers/Kconfig
> +++ b/drivers/Kconfig
> @@ -28,5 +28,6 @@ source "drivers/bus/Kconfig"
> source "drivers/regulator/Kconfig"
> source "drivers/reset/Kconfig"
> source "drivers/pci/Kconfig"
> +source "drivers/rtc/Kconfig"
>
> endmenu
> diff --git a/drivers/Makefile b/drivers/Makefile
> index 1990e86..4591f9a 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -27,3 +27,4 @@ obj-y += bus/
> obj-$(CONFIG_REGULATOR) += regulator/
> obj-$(CONFIG_RESET_CONTROLLER) += reset/
> obj-$(CONFIG_PCI) += pci/
> +obj-y += rtc/
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> new file mode 100644
> index 0000000..f148266
> --- /dev/null
> +++ b/drivers/rtc/Kconfig
> @@ -0,0 +1,16 @@
> +#
> +# RTC class/drivers configuration
> +#
> +
> +config RTC_LIB
> + bool
> +
> +menuconfig RTC_CLASS
> + bool "Real Time Clock"
> + default n
> + depends on !S390 && !UML
> + select RTC_LIB
> + help
> + Generic RTC class support. If you say yes here, you will
> + be allowed to plug one or more RTCs to your system. You will
> + probably want to enable one or more of the interfaces below.
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> new file mode 100644
> index 0000000..7d1b5bc
> --- /dev/null
> +++ b/drivers/rtc/Makefile
> @@ -0,0 +1,6 @@
> +#
> +# Makefile for RTC class/drivers.
> +#
> +
> +obj-$(CONFIG_RTC_LIB) += rtc-lib.o
> +obj-$(CONFIG_RTC_CLASS) += class.o
> diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
> new file mode 100644
> index 0000000..b808f3d
> --- /dev/null
> +++ b/drivers/rtc/class.c
> @@ -0,0 +1,62 @@
> +#include <linux/err.h>
> +#include <rtc.h>
> +#include <linux/rtc.h>
> +
> +LIST_HEAD(rtc_list);
> +EXPORT_SYMBOL(rtc_list);
> +
> +struct rtc_device *rtc_lookup(const char *name)
> +{
> + struct rtc_device *r;
> +
> + if (!name)
> + return ERR_PTR(-ENODEV);
> +
> + list_for_each_entry(r, &rtc_list, list) {
> + if (!strcmp(dev_name(&r->class_dev), name))
> + return r;
> + }
> +
> + return ERR_PTR(-ENODEV);
> +}
> +EXPORT_SYMBOL(rtc_lookup);
> +
> +int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm)
> +{
> + return rtc->ops->read_time(rtc, tm);
> +}
> +EXPORT_SYMBOL(rtc_read_time);
> +
> +int rtc_register(struct rtc_device *rtcdev)
> +{
> + struct device_d *dev = &rtcdev->class_dev;
> +
> + dev->id = DEVICE_ID_DYNAMIC;
> + strcpy(dev->name, "rtc");
> + if (rtcdev->dev)
> + dev->parent = rtcdev->dev;
> + platform_device_register(dev);
Please check the return value.
> +
> + list_add_tail(&rtcdev->list, &rtc_list);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(rtc_register);
> +
> +#if 0
> +int rtc_unregister(struct rtc_device *cdev)
> +{
> + struct device_d *dev = &cdev->class_dev;
> + int status;
> +
> + list_del(&cdev->list);
> + if (list_empty(&rtc_list))
> + initialized = CONSOLE_UNINITIALIZED;
> +
> + status = unregister_device(dev);
> + if (!status)
> + memset(cdev, 0, sizeof(*cdev));
> + return status;
> +}
> +EXPORT_SYMBOL(rtc_unregister);
> +#endif
CONSOLE_UNINITIALIZED? This probably wouldn't compile if it wasn't
ifdeffed. I think we can just remove this.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-07-10 21:40 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-10 8:33 [RFC 0/5] " Antony Pavlov
2014-07-10 8:33 ` [RFC 1/5] lib: import 'bcd' from linux-3.15 Antony Pavlov
2014-07-10 8:33 ` [RFC 2/5] add rtc support Antony Pavlov
2014-07-10 21:40 ` Sascha Hauer [this message]
2014-07-11 5:31 ` Antony Pavlov
2014-07-10 8:33 ` [RFC 3/5] i2c: import SMBus stuff from linux Antony Pavlov
2014-07-10 8:33 ` [RFC 4/5] rtc: add ds1307 support Antony Pavlov
2014-07-10 8:33 ` [RFC 5/5] commands: add hwclock Antony Pavlov
2014-07-10 21:45 ` Sascha Hauer
2014-07-11 5:59 ` Antony Pavlov
2014-07-11 6:07 ` Sascha Hauer
2014-07-11 5:37 ` [RFC 0/5] add rtc support Sascha Hauer
2014-07-11 6:12 ` Antony Pavlov
2014-07-11 6:10 ` Sascha Hauer
2014-07-11 6:32 ` Antony Pavlov
2014-07-11 6:37 ` Sascha Hauer
2014-07-11 11:27 ` Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140710214030.GH23235@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox