* Tegra2 USB issue
@ 2014-07-24 16:05 Antony Pavlov
2014-07-24 16:08 ` Lucas Stach
0 siblings, 1 reply; 6+ messages in thread
From: Antony Pavlov @ 2014-07-24 16:05 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
Hi!
I have just tested this commit
commit d8bdd537220dd83912949f19ba67029bd1f11c58
Author: Lucas Stach <dev@lynxeye.de>
Date: Fri Apr 12 12:28:14 2013 +0200
tegra: switch to proper CPU type
Tegras main CPUs are all ARMv7.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bb9b47b..dfb7e24 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -137,7 +137,7 @@ config ARCH_VEXPRESS
config ARCH_TEGRA
bool "Nvidia Tegra-based boards"
- select CPU_ARM926T
+ select CPU_V7
select HAS_DEBUG_LL
config ARCH_ZYNQ
This commit breaks 'usb' command --- it does not scan devices anymore, just hangs.
I have used codesourcery arm-2013.11 toolchain.
I'll try to check latest barebox from next, but just now I have no means to burn
barebox-tegra20-toshiba-ac100.img into AC100's ROM.
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Tegra2 USB issue
2014-07-24 16:05 Tegra2 USB issue Antony Pavlov
@ 2014-07-24 16:08 ` Lucas Stach
2014-07-24 16:46 ` Antony Pavlov
2014-07-25 16:41 ` Antony Pavlov
0 siblings, 2 replies; 6+ messages in thread
From: Lucas Stach @ 2014-07-24 16:08 UTC (permalink / raw)
To: Antony Pavlov; +Cc: barebox
Am Donnerstag, den 24.07.2014, 20:05 +0400 schrieb Antony Pavlov:
> Hi!
>
> I have just tested this commit
>
> commit d8bdd537220dd83912949f19ba67029bd1f11c58
> Author: Lucas Stach <dev@lynxeye.de>
> Date: Fri Apr 12 12:28:14 2013 +0200
>
> tegra: switch to proper CPU type
>
> Tegras main CPUs are all ARMv7.
>
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
> Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index bb9b47b..dfb7e24 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -137,7 +137,7 @@ config ARCH_VEXPRESS
>
> config ARCH_TEGRA
> bool "Nvidia Tegra-based boards"
> - select CPU_ARM926T
> + select CPU_V7
> select HAS_DEBUG_LL
>
> config ARCH_ZYNQ
>
> This commit breaks 'usb' command --- it does not scan devices anymore, just hangs.
>
> I have used codesourcery arm-2013.11 toolchain.
>
I haven't tested USB myself, as I'm not using second stage barebox after
u-boot and there's still things missing for USB to work on first stage.
Currently only SDMMMC is fully supported.
Are you testing exactly this commit? If so you might need to apply
431d8a247dfa63f817cda137a81dbb2244d413dc "arm: properly init alignment
trap bit", as USB might trigger an unaligned access.
> I'll try to check latest barebox from next, but just now I have no means to burn
> barebox-tegra20-toshiba-ac100.img into AC100's ROM.
>
You'll notice that a newer barebox won't build images for AC100 that are
suitable to burn into a boot media, because there are no BCTs publicly
available for this device. The resulting AC100 image is only useful for
starting with TegraRCM.
Regards,
Lucas
--
Pengutronix e.K. | Lucas Stach |
Industrial Linux Solutions | http://www.pengutronix.de/ |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Tegra2 USB issue
2014-07-24 16:08 ` Lucas Stach
@ 2014-07-24 16:46 ` Antony Pavlov
2014-07-24 16:39 ` Lucas Stach
2014-07-25 16:41 ` Antony Pavlov
1 sibling, 1 reply; 6+ messages in thread
From: Antony Pavlov @ 2014-07-24 16:46 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On Thu, 24 Jul 2014 18:08:33 +0200
Lucas Stach <l.stach@pengutronix.de> wrote:
> Am Donnerstag, den 24.07.2014, 20:05 +0400 schrieb Antony Pavlov:
> > Hi!
> >
> > I have just tested this commit
> >
> > commit d8bdd537220dd83912949f19ba67029bd1f11c58
> > Author: Lucas Stach <dev@lynxeye.de>
> > Date: Fri Apr 12 12:28:14 2013 +0200
> >
> > tegra: switch to proper CPU type
> >
> > Tegras main CPUs are all ARMv7.
> >
> > Signed-off-by: Lucas Stach <dev@lynxeye.de>
> > Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> >
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > index bb9b47b..dfb7e24 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -137,7 +137,7 @@ config ARCH_VEXPRESS
> >
> > config ARCH_TEGRA
> > bool "Nvidia Tegra-based boards"
> > - select CPU_ARM926T
> > + select CPU_V7
> > select HAS_DEBUG_LL
> >
> > config ARCH_ZYNQ
> >
> > This commit breaks 'usb' command --- it does not scan devices anymore, just hangs.
> >
> > I have used codesourcery arm-2013.11 toolchain.
> >
> I haven't tested USB myself, as I'm not using second stage barebox after
> u-boot and there's still things missing for USB to work on first stage.
> Currently only SDMMMC is fully supported.
How I can run barebox from barebox (u-boot) on AC100?
> Are you testing exactly this commit? If so you might need to apply
> 431d8a247dfa63f817cda137a81dbb2244d413dc "arm: properly init alignment
> trap bit", as USB might trigger an unaligned access.
Thanks!
I'll try to apply 431d8a.. tomorrow.
> > I'll try to check latest barebox from next, but just now I have no means to burn
> > barebox-tegra20-toshiba-ac100.img into AC100's ROM.
> >
> You'll notice that a newer barebox won't build images for AC100 that are
> suitable to burn into a boot media, because there are no BCTs publicly
> available for this device. The resulting AC100 image is only useful for
> starting with TegraRCM.
I work with my AC100 remotely so I can't press Ctrl-ESC on every boot for TegraRCM recovery mode.
How I can run barebox from barebox (u-boot) on AC100?
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Tegra2 USB issue
2014-07-24 16:46 ` Antony Pavlov
@ 2014-07-24 16:39 ` Lucas Stach
2014-07-24 19:15 ` Antony Pavlov
0 siblings, 1 reply; 6+ messages in thread
From: Lucas Stach @ 2014-07-24 16:39 UTC (permalink / raw)
To: Antony Pavlov; +Cc: barebox
Am Donnerstag, den 24.07.2014, 20:46 +0400 schrieb Antony Pavlov:
> On Thu, 24 Jul 2014 18:08:33 +0200
> Lucas Stach <l.stach@pengutronix.de> wrote:
>
> > Am Donnerstag, den 24.07.2014, 20:05 +0400 schrieb Antony Pavlov:
> > > Hi!
> > >
> > > I have just tested this commit
> > >
> > > commit d8bdd537220dd83912949f19ba67029bd1f11c58
> > > Author: Lucas Stach <dev@lynxeye.de>
> > > Date: Fri Apr 12 12:28:14 2013 +0200
> > >
> > > tegra: switch to proper CPU type
> > >
> > > Tegras main CPUs are all ARMv7.
> > >
> > > Signed-off-by: Lucas Stach <dev@lynxeye.de>
> > > Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
> > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > >
> > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > > index bb9b47b..dfb7e24 100644
> > > --- a/arch/arm/Kconfig
> > > +++ b/arch/arm/Kconfig
> > > @@ -137,7 +137,7 @@ config ARCH_VEXPRESS
> > >
> > > config ARCH_TEGRA
> > > bool "Nvidia Tegra-based boards"
> > > - select CPU_ARM926T
> > > + select CPU_V7
> > > select HAS_DEBUG_LL
> > >
> > > config ARCH_ZYNQ
> > >
> > > This commit breaks 'usb' command --- it does not scan devices anymore, just hangs.
> > >
> > > I have used codesourcery arm-2013.11 toolchain.
> > >
> > I haven't tested USB myself, as I'm not using second stage barebox after
> > u-boot and there's still things missing for USB to work on first stage.
> > Currently only SDMMMC is fully supported.
>
> How I can run barebox from barebox (u-boot) on AC100?
>
Um, how did you test things before? I personally haven't used second
stage for a long time. For u-boot you need to copy the barebox image
into the right spot (0x108000 for T20) and issue 'go' command. For
barebox a 'bootm /path/to/image' should do, but I won't guarantee that I
didn't break anything for second stage.
> > Are you testing exactly this commit? If so you might need to apply
> > 431d8a247dfa63f817cda137a81dbb2244d413dc "arm: properly init alignment
> > trap bit", as USB might trigger an unaligned access.
>
> Thanks!
> I'll try to apply 431d8a.. tomorrow.
>
> > > I'll try to check latest barebox from next, but just now I have no means to burn
> > > barebox-tegra20-toshiba-ac100.img into AC100's ROM.
> > >
> > You'll notice that a newer barebox won't build images for AC100 that are
> > suitable to burn into a boot media, because there are no BCTs publicly
> > available for this device. The resulting AC100 image is only useful for
> > starting with TegraRCM.
>
> I work with my AC100 remotely so I can't press Ctrl-ESC on every boot for TegraRCM recovery mode.
> How I can run barebox from barebox (u-boot) on AC100?
>
New barebox has a 'tegrarcm' command that will drop you right into
recovery mode, but obviously won't help if the machine is hanging.
Regards,
Lucas
--
Pengutronix e.K. | Lucas Stach |
Industrial Linux Solutions | http://www.pengutronix.de/ |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Tegra2 USB issue
2014-07-24 16:39 ` Lucas Stach
@ 2014-07-24 19:15 ` Antony Pavlov
0 siblings, 0 replies; 6+ messages in thread
From: Antony Pavlov @ 2014-07-24 19:15 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On Thu, 24 Jul 2014 18:39:59 +0200
Lucas Stach <l.stach@pengutronix.de> wrote:
> Am Donnerstag, den 24.07.2014, 20:46 +0400 schrieb Antony Pavlov:
> > On Thu, 24 Jul 2014 18:08:33 +0200
> > Lucas Stach <l.stach@pengutronix.de> wrote:
> >
> > > Am Donnerstag, den 24.07.2014, 20:05 +0400 schrieb Antony Pavlov:
> > > > Hi!
> > > >
> > > > I have just tested this commit
> > > >
> > > > commit d8bdd537220dd83912949f19ba67029bd1f11c58
> > > > Author: Lucas Stach <dev@lynxeye.de>
> > > > Date: Fri Apr 12 12:28:14 2013 +0200
> > > >
> > > > tegra: switch to proper CPU type
> > > >
> > > > Tegras main CPUs are all ARMv7.
> > > >
> > > > Signed-off-by: Lucas Stach <dev@lynxeye.de>
> > > > Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
> > > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > > >
> > > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > > > index bb9b47b..dfb7e24 100644
> > > > --- a/arch/arm/Kconfig
> > > > +++ b/arch/arm/Kconfig
> > > > @@ -137,7 +137,7 @@ config ARCH_VEXPRESS
> > > >
> > > > config ARCH_TEGRA
> > > > bool "Nvidia Tegra-based boards"
> > > > - select CPU_ARM926T
> > > > + select CPU_V7
> > > > select HAS_DEBUG_LL
> > > >
> > > > config ARCH_ZYNQ
> > > >
> > > > This commit breaks 'usb' command --- it does not scan devices anymore, just hangs.
> > > >
> > > > I have used codesourcery arm-2013.11 toolchain.
> > > >
> > > I haven't tested USB myself, as I'm not using second stage barebox after
> > > u-boot and there's still things missing for USB to work on first stage.
> > > Currently only SDMMMC is fully supported.
> >
> > How I can run barebox from barebox (u-boot) on AC100?
> >
> Um, how did you test things before? I personally haven't used second
I have AC100 with u-boot burned into the flash.
Here is my AC100 test seance:
1. reset AC100 (activate reset pin for 1 second and deactivate it;
i use USB-relay board for this task at the moment);
2. wait for u-boot prompt;
3. load barebox.bin via y-modem;
4. use 'go' commmand for running barebox.
You can see that I always use barebox second stage image.
> stage for a long time. For u-boot you need to copy the barebox image
> into the right spot (0x108000 for T20) and issue 'go' command. For
> barebox a 'bootm /path/to/image' should do, but I won't guarantee that I
> didn't break anything for second stage.
>
> > > Are you testing exactly this commit? If so you might need to apply
> > > 431d8a247dfa63f817cda137a81dbb2244d413dc "arm: properly init alignment
> > > trap bit", as USB might trigger an unaligned access.
> >
> > Thanks!
> > I'll try to apply 431d8a.. tomorrow.
> >
> > > > I'll try to check latest barebox from next, but just now I have no means to burn
> > > > barebox-tegra20-toshiba-ac100.img into AC100's ROM.
> > > >
> > > You'll notice that a newer barebox won't build images for AC100 that are
> > > suitable to burn into a boot media, because there are no BCTs publicly
> > > available for this device. The resulting AC100 image is only useful for
> > > starting with TegraRCM.
> >
> > I work with my AC100 remotely so I can't press Ctrl-ESC on every boot for TegraRCM recovery mode.
> > How I can run barebox from barebox (u-boot) on AC100?
> >
> New barebox has a 'tegrarcm' command that will drop you right into
> recovery mode, but obviously won't help if the machine is hanging.
Hmm, I have to see it :)
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Tegra2 USB issue
2014-07-24 16:08 ` Lucas Stach
2014-07-24 16:46 ` Antony Pavlov
@ 2014-07-25 16:41 ` Antony Pavlov
1 sibling, 0 replies; 6+ messages in thread
From: Antony Pavlov @ 2014-07-25 16:41 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On Thu, 24 Jul 2014 18:08:33 +0200
Lucas Stach <l.stach@pengutronix.de> wrote:
> Am Donnerstag, den 24.07.2014, 20:05 +0400 schrieb Antony Pavlov:
> > Hi!
> >
> > I have just tested this commit
> >
> > commit d8bdd537220dd83912949f19ba67029bd1f11c58
> > Author: Lucas Stach <dev@lynxeye.de>
> > Date: Fri Apr 12 12:28:14 2013 +0200
> >
> > tegra: switch to proper CPU type
> >
> > Tegras main CPUs are all ARMv7.
> >
> > Signed-off-by: Lucas Stach <dev@lynxeye.de>
> > Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> >
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > index bb9b47b..dfb7e24 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -137,7 +137,7 @@ config ARCH_VEXPRESS
> >
> > config ARCH_TEGRA
> > bool "Nvidia Tegra-based boards"
> > - select CPU_ARM926T
> > + select CPU_V7
> > select HAS_DEBUG_LL
> >
> > config ARCH_ZYNQ
> >
> > This commit breaks 'usb' command --- it does not scan devices anymore, just hangs.
> >
> > I have used codesourcery arm-2013.11 toolchain.
> >
> I haven't tested USB myself, as I'm not using second stage barebox after
> u-boot and there's still things missing for USB to work on first stage.
> Currently only SDMMMC is fully supported.
>
> Are you testing exactly this commit? If so you might need to apply
> 431d8a247dfa63f817cda137a81dbb2244d413dc "arm: properly init alignment
> trap bit", as USB might trigger an unaligned access.
Alas! Appling of 431d8a24 does not help.
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-07-25 16:28 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-07-24 16:05 Tegra2 USB issue Antony Pavlov
2014-07-24 16:08 ` Lucas Stach
2014-07-24 16:46 ` Antony Pavlov
2014-07-24 16:39 ` Lucas Stach
2014-07-24 19:15 ` Antony Pavlov
2014-07-25 16:41 ` Antony Pavlov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox