From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1XC7L2-0003pM-3b for barebox@lists.infradead.org; Tue, 29 Jul 2014 13:21:12 +0000 Date: Tue, 29 Jul 2014 15:20:45 +0200 From: Sascha Hauer Message-ID: <20140729132045.GI23235@pengutronix.de> References: <1406582130-10116-1-git-send-email-antonynpavlov@gmail.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1406582130-10116-1-git-send-email-antonynpavlov@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH v2 00/11] ARM: add support for Canon DIGIC chips and Canon PowerShot A1100 IS To: Antony Pavlov Cc: barebox@lists.infradead.org On Tue, Jul 29, 2014 at 01:15:19AM +0400, Antony Pavlov wrote: > Changes since v1: > > * fix reset_cpu(); > * add real Canon A1100 camera support. > > DIGIC is Canon Inc.'s name for a family of SoC > for digital cameras and camcorders. > > See http://en.wikipedia.org/wiki/DIGIC for details. > > There is no publicly available specification for > DIGIC chips. All information about DIGIC chip > internals is based on reverse engineering efforts > made by CHDK (http://chdk.wikia.com) and > Magic Lantern (http://www.magiclantern.fm) projects > contributors. > > Also this patch series adds initial support for Canon > PowerShot A1100 IS compact camera (it is my only camera > with connected UART interface). As the DIGIC-based cameras > differences mostly are unsignificant (e.g. RAM-size, > ROM type and size, GPIO usage) the other compact > and DSLR cameras support can be easely added. > > One can easely run barebox for Canon A1100 using QEMU version 2.0 > or newer. > > This patchseries uses some patches already submitted to maillist: > > * clean barebox.zynq > * treewide: drop Doxygen stuff Applied this series up to 9/11 since I'm quite unsure if it's allowed to include a GPLv3+ tool into a GPLv2 project. There are some ways out of this situation: - Ask the author to relicense it under GPLv2+ - rewrite the tool - Use it as external tool - Convince me that it's allowed ;) Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox