From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1XCjFs-0005Fj-Rn for barebox@lists.infradead.org; Thu, 31 Jul 2014 05:50:21 +0000 Date: Thu, 31 Jul 2014 07:49:57 +0200 From: Sascha Hauer Message-ID: <20140731054957.GQ23235@pengutronix.de> References: <1406666701-15356-1-git-send-email-ezequiel.garcia@free-electrons.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1406666701-15356-1-git-send-email-ezequiel.garcia@free-electrons.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 0/6] Add network support for Armada 370/XP To: Ezequiel Garcia Cc: Thomas Petazzoni , barebox@lists.infradead.org, Jason Cooper , Willy Tarreau Hi Ezequiel, On Tue, Jul 29, 2014 at 05:44:55PM -0300, Ezequiel Garcia wrote: > This patchset adds support for the network controller found on Marvell > Armada 370/XP SoC. > > The first patch is needed to parse the PHY property used in the current > devicetree, which uses 'phy' instead of 'phy-handle'. While here, the patch > adds support for the two obsolete DT PHY properties: 'phy' and 'phy-device'. > > The second patch is actually an improvement. It makes the clock a required > property of the mvmdio driver, which makes the probing of the device more > robust, and prevents the annoying freezing when the clock is not provided. > > The third patch supports the QSGMII interface. > > The fourth patch adds support for the Marvell 88E1545 PHY chip. There's not > much work to do, except configuring the QSGMII interface. This chip is present > in Marvell's Armada XP GP board. > > The fifth patch adds the mvneta driver. Most of the configuration part is > based on Linux's mvneta driver, while some of code organization is based > on Barebox's orion-gbe driver. > > The last patch adds network support in the defconfigs. > > This has been tested on the Armada XP GP board only. I'll try to test > Openblocks AX3 and Mirabox in the following days. However, we might need > some special PHY support for each them, as the Openblocks AX3 has a > 88E1543 PHY, and the Mirabox has a 88E1510 PHY. > > Ezequiel Garcia (6): > net: phy: Add fallbacks for the obsoletes phy DT properties > net: phy: mdio-mvebu: Make the clock property required > net: phy: Add minimal support for QSGMII PHY > net: phy: Support Marvell 88EE1545 PHY > net: Add driver for Armada 370/XP 10/100/1000 Mbps network controller > configs: Add network options to Armada 370/XP boards I applied up to 3/6 for now. The network driver needs a small fix. Please let me know once you're happy enough with the phy support to apply it. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox