* [PATCH] i2c: at91: add support of device tree
@ 2014-09-17 15:00 Raphaël Poggi
2014-09-17 15:00 ` [PATCH] I2C: at91: fix the method for interrupt Raphaël Poggi
2014-09-18 6:27 ` [PATCH] i2c: at91: add support of device tree Sascha Hauer
0 siblings, 2 replies; 4+ messages in thread
From: Raphaël Poggi @ 2014-09-17 15:00 UTC (permalink / raw)
To: barebox; +Cc: Raphaël Poggi
Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
---
drivers/i2c/busses/i2c-at91.c | 91 ++++++++++++++++++++++++++++++++++---------
1 file changed, 73 insertions(+), 18 deletions(-)
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 399f6a9..6494401 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -186,8 +186,8 @@ static int at91_twi_wait_completion(struct at91_twi_dev *dev)
dev->transfer_status |= status;
- while(!(at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_TXCOMP)) {
- if(is_timeout(start, AT91_I2C_TIMEOUT)) {
+ while (!(at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_TXCOMP)) {
+ if (is_timeout(start, AT91_I2C_TIMEOUT)) {
dev_warn(&dev->adapter.dev, "timeout waiting for bus ready\n");
return -ETIMEDOUT;
}
@@ -346,41 +346,95 @@ static struct at91_twi_pdata at91sam9g10_config = {
.has_unre_flag = false,
};
+static struct at91_twi_pdata at91sam9x5_config = {
+ .clk_max_div = 7,
+ .clk_offset = 4,
+ .has_unre_flag = false,
+};
+
static struct platform_device_id at91_twi_devtypes[] = {
{
- .name = "i2c-at91rm9200",
+ .name = "at91rm9200-i2c",
.driver_data = (unsigned long) &at91rm9200_config,
}, {
- .name = "i2c-at91sam9261",
+ .name = "at91sam9261-i2c",
.driver_data = (unsigned long) &at91sam9261_config,
}, {
- .name = "i2c-at91sam9260",
+ .name = "at91sam9260-i2c",
.driver_data = (unsigned long) &at91sam9260_config,
}, {
- .name = "i2c-at91sam9g20",
+ .name = "at91sam9g20-i2c",
.driver_data = (unsigned long) &at91sam9g20_config,
}, {
- .name = "i2c-at91sam9g10",
+ .name = "at91sam9g10-i2c",
.driver_data = (unsigned long) &at91sam9g10_config,
}, {
+ .name = "at91sam9x5-i2c",
+ .driver_data = (unsigned long) &at91sam9x5_config,
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct of_device_id at91_twi_dt_ids[] = {
+ {
+ .compatible = "atmel,at91rm9200-i2c",
+ .data = (unsigned long) &at91rm9200_config,
+ } , {
+ .compatible = "atmel,at91sam9260-i2c",
+ .data = (unsigned long) &at91sam9260_config,
+ } , {
+ .compatible = "atmel,at91sam9261-i2c",
+ .data = (unsigned long) &at91sam9261_config,
+ } , {
+ .compatible = "atmel,at91sam9g20-i2c",
+ .data = (unsigned long) &at91sam9g20_config,
+ } , {
+ .compatible = "atmel,at91sam9g10-i2c",
+ .data = (unsigned long) &at91sam9g10_config,
+ }, {
+ .compatible = "atmel,at91sam9x5-i2c",
+ .data = (unsigned long) &at91sam9x5_config,
+ }, {
/* sentinel */
}
};
+static struct at91_twi_pdata *at91_twi_get_driver_data(struct device_d *dev)
+{
+ struct at91_twi_pdata *i2c_data = NULL;
+ int rc;
+
+ if (dev->device_node) {
+ const struct of_device_id *match;
+ match = of_match_node(at91_twi_dt_ids, dev->device_node);
+ if (!match)
+ i2c_data = NULL;
+ else
+ i2c_data = (struct at91_twi_pdata *)match->data;
+ } else {
+ rc = dev_get_drvdata(dev, (unsigned long *)&i2c_data);
+ if (rc)
+ i2c_data = NULL;
+ }
+
+ return i2c_data;
+}
+
static int at91_twi_probe(struct device_d *dev)
{
struct at91_twi_dev *i2c_at91;
- struct at91_twi_pdata *i2c_data;
- int rc;
+ int rc = 0;
u32 bus_clk_rate;
i2c_at91 = xzalloc(sizeof(struct at91_twi_dev));
- rc = dev_get_drvdata(dev, (unsigned long *)&i2c_data);
- if (rc)
+ i2c_at91->pdata = at91_twi_get_driver_data(dev);
+ if (!i2c_at91->pdata) {
+ dev_err(dev, "failed to retrieve driver data\n");
+ rc = -ENODEV;
goto out_free;
-
- i2c_at91->pdata = i2c_data;
+ }
i2c_at91->base = dev_request_mem_region(dev, 0);
if (!i2c_at91->base) {
@@ -389,7 +443,7 @@ static int at91_twi_probe(struct device_d *dev)
goto out_free;
}
- i2c_at91->clk = clk_get(dev, "twi_clk");
+ i2c_at91->clk = clk_get(dev, NULL);
if (IS_ERR(i2c_at91->clk)) {
dev_err(dev, "no clock defined\n");
rc = -ENODEV;
@@ -418,17 +472,18 @@ static int at91_twi_probe(struct device_d *dev)
return 0;
out_adap_fail:
- clk_disable(i2c_at91->clk);
- clk_put(i2c_at91->clk);
+ clk_disable(i2c_at91->clk);
+ clk_put(i2c_at91->clk);
out_free:
- kfree(i2c_at91);
- return rc;
+ kfree(i2c_at91);
+ return rc;
}
static struct driver_d at91_twi_driver = {
.name = "at91-twi",
.probe = at91_twi_probe,
.id_table = at91_twi_devtypes,
+ .of_compatible = DRV_OF_COMPAT(at91_twi_dt_ids),
};
device_platform_driver(at91_twi_driver);
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] I2C: at91: fix the method for interrupt
2014-09-17 15:00 [PATCH] i2c: at91: add support of device tree Raphaël Poggi
@ 2014-09-17 15:00 ` Raphaël Poggi
2014-09-18 6:27 ` [PATCH] i2c: at91: add support of device tree Sascha Hauer
1 sibling, 0 replies; 4+ messages in thread
From: Raphaël Poggi @ 2014-09-17 15:00 UTC (permalink / raw)
To: barebox
From: Bo Shen <voice.shen@atmel.com>
As the i2c-at91 driver won't work in the interrupt mode,
so need to poll the interrupts.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
drivers/i2c/busses/i2c-at91.c | 38 +++++++++++++++++++++++---------------
1 file changed, 23 insertions(+), 15 deletions(-)
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 6494401..d9224de 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -174,24 +174,32 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
static int at91_twi_wait_completion(struct at91_twi_dev *dev)
{
uint64_t start = get_time_ns();
- unsigned int status = at91_twi_read(dev, AT91_TWI_SR);
- unsigned int irqstatus = at91_twi_read(dev, AT91_TWI_IMR);
+ unsigned int status;
+ unsigned int irqstatus;
+
+ do {
+ status = at91_twi_read(dev, AT91_TWI_SR);
+ irqstatus = at91_twi_read(dev, AT91_TWI_IMR);
+
+ if (!(status & irqstatus)) {
+ if (is_timeout(start, AT91_I2C_TIMEOUT)) {
+ dev_warn(&dev->adapter.dev, "timeout waiting for bus ready\n");
+ return -ETIMEDOUT;
+ } else {
+ continue;
+ }
+ }
- if (irqstatus & AT91_TWI_RXRDY)
- at91_twi_read_next_byte(dev);
- else if (irqstatus & AT91_TWI_TXRDY)
- at91_twi_write_next_byte(dev);
- else
- dev_warn(&dev->adapter.dev, "neither rx and tx are ready\n");
+ if (irqstatus & AT91_TWI_RXRDY)
+ at91_twi_read_next_byte(dev);
+ else if (irqstatus & AT91_TWI_TXRDY)
+ at91_twi_write_next_byte(dev);
+ else
+ dev_warn(&dev->adapter.dev, "neither rx and tx are ready\n");
- dev->transfer_status |= status;
+ dev->transfer_status |= status;
- while (!(at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_TXCOMP)) {
- if (is_timeout(start, AT91_I2C_TIMEOUT)) {
- dev_warn(&dev->adapter.dev, "timeout waiting for bus ready\n");
- return -ETIMEDOUT;
- }
- }
+ } while (!(at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_TXCOMP));
at91_disable_twi_interrupts(dev);
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] i2c: at91: add support of device tree
2014-09-17 15:00 [PATCH] i2c: at91: add support of device tree Raphaël Poggi
2014-09-17 15:00 ` [PATCH] I2C: at91: fix the method for interrupt Raphaël Poggi
@ 2014-09-18 6:27 ` Sascha Hauer
1 sibling, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2014-09-18 6:27 UTC (permalink / raw)
To: Raphaël Poggi; +Cc: barebox
On Wed, Sep 17, 2014 at 05:00:18PM +0200, Raphaël Poggi wrote:
> Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
> ---
> drivers/i2c/busses/i2c-at91.c | 91 ++++++++++++++++++++++++++++++++++---------
> 1 file changed, 73 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
> index 399f6a9..6494401 100644
> --- a/drivers/i2c/busses/i2c-at91.c
> +++ b/drivers/i2c/busses/i2c-at91.c
> @@ -186,8 +186,8 @@ static int at91_twi_wait_completion(struct at91_twi_dev *dev)
>
> dev->transfer_status |= status;
>
> - while(!(at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_TXCOMP)) {
> - if(is_timeout(start, AT91_I2C_TIMEOUT)) {
> + while (!(at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_TXCOMP)) {
> + if (is_timeout(start, AT91_I2C_TIMEOUT)) {
Normally this change should be in a separate patch.
> }, {
> + .name = "at91sam9x5-i2c",
> + .driver_data = (unsigned long) &at91sam9x5_config,
> + }, {
ditto for adding support for a new SoC.
Ok for this time since this driver currently has no users.
> +static struct at91_twi_pdata *at91_twi_get_driver_data(struct device_d *dev)
> +{
> + struct at91_twi_pdata *i2c_data = NULL;
> + int rc;
> +
> + if (dev->device_node) {
> + const struct of_device_id *match;
> + match = of_match_node(at91_twi_dt_ids, dev->device_node);
> + if (!match)
> + i2c_data = NULL;
> + else
> + i2c_data = (struct at91_twi_pdata *)match->data;
> + } else {
> + rc = dev_get_drvdata(dev, (unsigned long *)&i2c_data);
> + if (rc)
> + i2c_data = NULL;
> + }
Just call dev_get_drvdata(). It will do the right thing, even for the
device tree case.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] i2c: at91: fix coding style issue
@ 2014-09-24 12:57 Raphaël Poggi
2014-09-24 12:57 ` [PATCH] i2c: at91: add support of device tree Raphaël Poggi
0 siblings, 1 reply; 4+ messages in thread
From: Raphaël Poggi @ 2014-09-24 12:57 UTC (permalink / raw)
To: barebox; +Cc: Raphaël Poggi
Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
---
drivers/i2c/busses/i2c-at91.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 399f6a9..2ce3fa3 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -186,8 +186,8 @@ static int at91_twi_wait_completion(struct at91_twi_dev *dev)
dev->transfer_status |= status;
- while(!(at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_TXCOMP)) {
- if(is_timeout(start, AT91_I2C_TIMEOUT)) {
+ while (!(at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_TXCOMP)) {
+ if (is_timeout(start, AT91_I2C_TIMEOUT)) {
dev_warn(&dev->adapter.dev, "timeout waiting for bus ready\n");
return -ETIMEDOUT;
}
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] i2c: at91: add support of device tree
2014-09-24 12:57 [PATCH] i2c: at91: fix coding style issue Raphaël Poggi
@ 2014-09-24 12:57 ` Raphaël Poggi
0 siblings, 0 replies; 4+ messages in thread
From: Raphaël Poggi @ 2014-09-24 12:57 UTC (permalink / raw)
To: barebox; +Cc: Raphaël Poggi
Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
---
drivers/i2c/busses/i2c-at91.c | 41 ++++++++++++++++++++++++++++++++++-------
1 file changed, 34 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 9490822..a2236ed 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -376,18 +376,44 @@ static struct platform_device_id at91_twi_devtypes[] = {
}
};
+static struct of_device_id at91_twi_dt_ids[] = {
+ {
+ .compatible = "atmel,at91rm9200-i2c",
+ .data = (unsigned long) &at91rm9200_config,
+ } , {
+ .compatible = "atmel,at91sam9260-i2c",
+ .data = (unsigned long) &at91sam9260_config,
+ } , {
+ .compatible = "atmel,at91sam9261-i2c",
+ .data = (unsigned long) &at91sam9261_config,
+ } , {
+ .compatible = "atmel,at91sam9g20-i2c",
+ .data = (unsigned long) &at91sam9g20_config,
+ } , {
+ .compatible = "atmel,at91sam9g10-i2c",
+ .data = (unsigned long) &at91sam9g10_config,
+ }, {
+ .compatible = "atmel,at91sam9x5-i2c",
+ .data = (unsigned long) &at91sam9x5_config,
+ }, {
+ /* sentinel */
+ }
+};
+
static int at91_twi_probe(struct device_d *dev)
{
struct at91_twi_dev *i2c_at91;
struct at91_twi_pdata *i2c_data;
- int rc;
+ int rc = 0;
u32 bus_clk_rate;
i2c_at91 = xzalloc(sizeof(struct at91_twi_dev));
rc = dev_get_drvdata(dev, (unsigned long *)&i2c_data);
- if (rc)
+ if (rc < 0) {
+ dev_err(dev, "failed to retrieve driver data\n");
goto out_free;
+ }
i2c_at91->pdata = i2c_data;
@@ -398,7 +424,7 @@ static int at91_twi_probe(struct device_d *dev)
goto out_free;
}
- i2c_at91->clk = clk_get(dev, "twi_clk");
+ i2c_at91->clk = clk_get(dev, NULL);
if (IS_ERR(i2c_at91->clk)) {
dev_err(dev, "no clock defined\n");
rc = -ENODEV;
@@ -427,17 +453,18 @@ static int at91_twi_probe(struct device_d *dev)
return 0;
out_adap_fail:
- clk_disable(i2c_at91->clk);
- clk_put(i2c_at91->clk);
+ clk_disable(i2c_at91->clk);
+ clk_put(i2c_at91->clk);
out_free:
- kfree(i2c_at91);
- return rc;
+ kfree(i2c_at91);
+ return rc;
}
static struct driver_d at91_twi_driver = {
.name = "at91-twi",
.probe = at91_twi_probe,
.id_table = at91_twi_devtypes,
+ .of_compatible = DRV_OF_COMPAT(at91_twi_dt_ids),
};
device_platform_driver(at91_twi_driver);
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-09-24 12:57 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-09-17 15:00 [PATCH] i2c: at91: add support of device tree Raphaël Poggi
2014-09-17 15:00 ` [PATCH] I2C: at91: fix the method for interrupt Raphaël Poggi
2014-09-18 6:27 ` [PATCH] i2c: at91: add support of device tree Sascha Hauer
2014-09-24 12:57 [PATCH] i2c: at91: fix coding style issue Raphaël Poggi
2014-09-24 12:57 ` [PATCH] i2c: at91: add support of device tree Raphaël Poggi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox