mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: "Eric Bénard" <eric@eukrea.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 2/2] eukrea-cpuimx35: refresh configuration
Date: Tue, 23 Sep 2014 08:05:29 +0200	[thread overview]
Message-ID: <20140923060529.GS4992@pengutronix.de> (raw)
In-Reply-To: <1411424015-16466-2-git-send-email-eric@eukrea.com>

On Tue, Sep 23, 2014 at 12:13:35AM +0200, Eric Bénard wrote:
> Signed-off-by: Eric Bénard <eric@eukrea.com>
> ---
>  arch/arm/configs/eukrea_cpuimx35_defconfig | 61 ++++++++++++++++++------------
>  1 file changed, 36 insertions(+), 25 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/arch/arm/configs/eukrea_cpuimx35_defconfig b/arch/arm/configs/eukrea_cpuimx35_defconfig
> index 7569cde..4c83102 100644
> --- a/arch/arm/configs/eukrea_cpuimx35_defconfig
> +++ b/arch/arm/configs/eukrea_cpuimx35_defconfig
> @@ -1,71 +1,81 @@
>  CONFIG_ARCH_IMX=y
> -CONFIG_CACHE_L2X0=y
> -CONFIG_ARCH_IMX35=y
> +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x40000
>  CONFIG_MACH_EUKREA_CPUIMX35=y
>  CONFIG_IMX_IIM=y
>  CONFIG_IMX_IIM_FUSE_BLOW=y
>  CONFIG_AEABI=y
>  CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_PBL_IMAGE=y
> +CONFIG_PBL_RELOCATABLE=y
>  CONFIG_MMU=y
> -CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x40000
>  CONFIG_MALLOC_SIZE=0x800000
>  CONFIG_EXPERIMENTAL=y
>  CONFIG_MALLOC_TLSF=y
> -CONFIG_LONGHELP=y
> +CONFIG_RELOCATABLE=y
>  CONFIG_GLOB=y
>  CONFIG_HUSH_FANCY_PROMPT=y
>  CONFIG_CMDLINE_EDITING=y
>  CONFIG_AUTO_COMPLETE=y
> -# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
>  CONFIG_CONSOLE_ACTIVATE_ALL=y
> +CONFIG_DEFAULT_COMPRESSION_LZO=y
>  CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
>  CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/eukrea_cpuimx35/env"
> -CONFIG_CMD_EDIT=y
> -CONFIG_CMD_SLEEP=y
> -CONFIG_CMD_SAVEENV=y
> -CONFIG_CMD_EXPORT=y
> -CONFIG_CMD_PRINTENV=y
> -CONFIG_CMD_READLINE=y
> -CONFIG_CMD_AUTOMOUNT=y
> -CONFIG_CMD_ECHO_E=y
> -CONFIG_CMD_LOADB=y
> -CONFIG_CMD_MEMINFO=y
> +CONFIG_LONGHELP=y
>  CONFIG_CMD_IOMEM=y
> -CONFIG_CMD_MTEST=y
> -CONFIG_CMD_FLASH=y
> +CONFIG_CMD_IMD=y
> +CONFIG_CMD_MEMINFO=y
>  CONFIG_CMD_BOOTM_SHOW_TYPE=y
>  CONFIG_CMD_BOOTM_VERBOSE=y
>  CONFIG_CMD_BOOTM_INITRD=y
>  CONFIG_CMD_BOOTM_OFTREE=y
>  CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
> -CONFIG_CMD_RESET=y
>  CONFIG_CMD_GO=y
> -CONFIG_CMD_OFTREE=y
> -CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_LOADB=y
> +CONFIG_CMD_RESET=y
>  CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_AUTOMOUNT=y
> +CONFIG_CMD_EXPORT=y
> +CONFIG_CMD_LOADENV=y
> +CONFIG_CMD_PRINTENV=y
>  CONFIG_CMD_MAGICVAR=y
>  CONFIG_CMD_MAGICVAR_HELP=y
> +CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_UNCOMPRESS=y
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_MIITOOL=y
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_TFTP=y
> +CONFIG_CMD_ECHO_E=y
> +CONFIG_CMD_EDIT=y
>  CONFIG_CMD_SPLASH=y
> +CONFIG_CMD_READLINE=y
> +CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_MEMTEST=y
> +CONFIG_CMD_MM=y
> +CONFIG_CMD_CLK=y
> +CONFIG_CMD_DETECT=y
> +CONFIG_CMD_FLASH=y
>  CONFIG_CMD_GPIO=y
> -CONFIG_CMD_UNCOMPRESS=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_LED=y
>  CONFIG_CMD_LED_TRIGGER=y
> +CONFIG_CMD_USBGADGET=y
> +CONFIG_CMD_OFTREE=y
>  CONFIG_NET=y
> -CONFIG_CMD_DHCP=y
>  CONFIG_NET_NFS=y
> -CONFIG_CMD_PING=y
> -CONFIG_CMD_TFTP=y
> -CONFIG_FS_TFTP=y
>  CONFIG_NET_NETCONSOLE=y
>  CONFIG_DRIVER_NET_FEC_IMX=y
> +CONFIG_SMSC_PHY=y
>  # CONFIG_SPI is not set
>  CONFIG_I2C=y
>  CONFIG_I2C_IMX=y
>  CONFIG_MTD=y
>  CONFIG_MTD_RAW_DEVICE=y
>  CONFIG_NAND=y
> +CONFIG_NAND_ALLOW_ERASE_BAD=y
>  CONFIG_NAND_IMX=y
> +CONFIG_NAND_IMX_BBM=y
>  CONFIG_USB_HOST=y
>  CONFIG_USB_EHCI=y
>  CONFIG_USB_STORAGE=y
> @@ -79,6 +89,7 @@ CONFIG_MCI_IMX_ESDHC=y
>  CONFIG_LED=y
>  CONFIG_LED_GPIO=y
>  CONFIG_LED_TRIGGERS=y
> +CONFIG_FS_TFTP=y
>  CONFIG_FS_FAT=y
>  CONFIG_FS_FAT_WRITE=y
>  CONFIG_FS_FAT_LFN=y
> -- 
> 1.9.3
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2014-09-23  6:05 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-22 22:13 [PATCH 1/2] serial-imx: fix for non of usage Eric Bénard
2014-09-22 22:13 ` [PATCH 2/2] eukrea-cpuimx35: refresh configuration Eric Bénard
2014-09-23  6:05   ` Sascha Hauer [this message]
2014-09-23  6:04 ` [PATCH 1/2] serial-imx: fix for non of usage Sascha Hauer
2014-09-23  6:15   ` Eric Bénard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140923060529.GS4992@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=eric@eukrea.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox