From: Antony Pavlov <antonynpavlov@gmail.com>
To: Lucas Stach <dev@lynxeye.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 00/15] PCI bridges and Tegra PCI stuff
Date: Thu, 25 Sep 2014 23:02:38 +0400 [thread overview]
Message-ID: <20140925230238.18b41a52be8f3d5cc45d9bc7@gmail.com> (raw)
In-Reply-To: <1411664709-13699-1-git-send-email-dev@lynxeye.de>
On Thu, 25 Sep 2014 19:04:54 +0200
Lucas Stach <dev@lynxeye.de> wrote:
> Ok, I'm sending this out before it gathers any more dust.
>
> This still doesn't work on Tegra K1 and I also haven't got
> around to finish the rtl8169 network driver, but it seems
> this pile is already a worthwile improvement.
>
> First 7 patches are general barebox PCI improvements for
> better tracking of PCI resources and handling bridge setup.
I have tryed this series.
I have got several
'BAR does not fit within bus IO res'
messages on qemu-malta. So not all available pci devices were registered.
> Others are Tegra related and at least provide working
> PCIe on the Tegra30 Beaver board.
>
> More to come later...
>
> Lucas Stach (15):
> pci: split out device init
> pci: add resource enum
> pci: properly populate prefetchable BARs
> pci: setup bridges and traverse buses behind them
> pci: prettyprint device names
> pci: track parent<->child relationship
> commands: lspci: go down into subordinate busses
> clk: tegra: add PLLE setup functions
> clk: tegra30: add PCIe clocks
> i2c: tegra: move to fs initcall
> ARM: tegra: beaver: enable PEX voltage rail
> tegra: pmc: add powerdomain handling
> of: import pci range parser from linux
> pci: add Tegra host controller driver
> ARM: tegra: advertise PCI support
>
> arch/arm/Kconfig | 1 +
> arch/arm/boards/nvidia-beaver/board.c | 13 +-
> arch/arm/configs/tegra_v7_defconfig | 1 +
> arch/arm/mach-tegra/include/mach/tegra-powergate.h | 93 ++
> arch/arm/mach-tegra/include/mach/tegra20-car.h | 2 +
> arch/arm/mach-tegra/include/mach/tegra30-car.h | 2 +
> arch/arm/mach-tegra/tegra20-pmc.c | 139 ++-
> commands/lspci.c | 25 +-
> drivers/clk/tegra/clk-pll.c | 116 ++
> drivers/clk/tegra/clk-tegra30.c | 31 +
> drivers/clk/tegra/clk.h | 6 +
> drivers/i2c/busses/i2c-tegra.c | 2 +-
> drivers/of/address.c | 68 ++
> drivers/pci/Kconfig | 7 +
> drivers/pci/Makefile | 1 +
> drivers/pci/bus.c | 3 +-
> drivers/pci/pci-tegra.c | 1193 ++++++++++++++++++++
> drivers/pci/pci.c | 272 +++--
> include/linux/pci.h | 9 +
> include/linux/pci_regs.h | 28 +
> include/of_address.h | 51 +-
> 21 files changed, 1977 insertions(+), 86 deletions(-)
> create mode 100644 arch/arm/mach-tegra/include/mach/tegra-powergate.h
> create mode 100644 drivers/pci/pci-tegra.c
>
> --
> 1.9.3
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
--
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-09-25 18:48 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-25 17:04 Lucas Stach
2014-09-25 17:04 ` [PATCH 01/15] pci: split out device init Lucas Stach
2014-09-25 17:04 ` [PATCH 02/15] pci: add resource enum Lucas Stach
2014-09-25 17:04 ` [PATCH 03/15] pci: properly populate prefetchable BARs Lucas Stach
2014-09-25 17:04 ` [PATCH 04/15] pci: setup bridges and traverse buses behind them Lucas Stach
2014-09-25 17:04 ` [PATCH 05/15] pci: prettyprint device names Lucas Stach
2014-09-25 17:05 ` [PATCH 06/15] pci: track parent<->child relationship Lucas Stach
2014-09-25 17:05 ` [PATCH 07/15] commands: lspci: go down into subordinate busses Lucas Stach
2014-09-25 17:05 ` [PATCH 08/15] clk: tegra: add PLLE setup functions Lucas Stach
2014-09-25 17:05 ` [PATCH 09/15] clk: tegra30: add PCIe clocks Lucas Stach
2014-09-25 17:05 ` [PATCH 10/15] i2c: tegra: move to fs initcall Lucas Stach
2014-09-25 17:05 ` [PATCH 11/15] ARM: tegra: beaver: enable PEX voltage rail Lucas Stach
2014-09-25 17:05 ` [PATCH 12/15] tegra: pmc: add powerdomain handling Lucas Stach
2014-09-25 17:05 ` [PATCH 13/15] of: import pci range parser from linux Lucas Stach
2014-09-25 17:05 ` [PATCH 14/15] pci: add Tegra host controller driver Lucas Stach
2014-09-25 17:05 ` [PATCH 15/15] ARM: tegra: advertise PCI support Lucas Stach
2014-09-25 19:02 ` Antony Pavlov [this message]
2014-09-25 20:46 ` [PATCH 00/15] PCI bridges and Tegra PCI stuff Lucas Stach
2014-10-01 6:17 ` Sascha Hauer
2014-10-01 7:19 ` Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140925230238.18b41a52be8f3d5cc45d9bc7@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=dev@lynxeye.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox