mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: Antony Pavlov <antonynpavlov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] pci: split out device init
Date: Tue, 7 Oct 2014 19:45:42 +0400	[thread overview]
Message-ID: <20141007194542.51a7baf6e0abec1d3e165ac2@gmail.com> (raw)
In-Reply-To: <1412696527-3981-2-git-send-email-antonynpavlov@gmail.com>

On Tue,  7 Oct 2014 19:42:06 +0400
Antony Pavlov <antonynpavlov@gmail.com> wrote:

Please ignore this message.

Sorry!

> From: Lucas Stach <dev@lynxeye.de>
> 
> To make it reusable and the code more readable.
> 
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
> ---
>  drivers/pci/pci.c | 137 +++++++++++++++++++++++++++++-------------------------
>  1 file changed, 74 insertions(+), 63 deletions(-)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index a1b7680..ef998dc 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -12,6 +12,8 @@ static struct pci_controller *hose_head, **hose_tail = &hose_head;
>  LIST_HEAD(pci_root_buses);
>  EXPORT_SYMBOL(pci_root_buses);
>  static u8 bus_index;
> +static resource_size_t last_mem;
> +static resource_size_t last_io;
>  
>  static struct pci_bus *pci_alloc_bus(void)
>  {
> @@ -45,6 +47,10 @@ void register_pci_controller(struct pci_controller *hose)
>  
>  	if (hose->set_busno)
>  		hose->set_busno(hose, bus->number);
> +
> +	last_mem = bus->resource[0]->start;
> +	last_io = bus->resource[1]->start;
> +
>  	pci_scan_bus(bus);
>  
>  	list_add_tail(&bus->node, &pci_root_buses);
> @@ -111,27 +117,80 @@ static struct pci_dev *alloc_pci_dev(void)
>  	return dev;
>  }
>  
> +static void setup_device(struct pci_dev *dev, int max_bar)
> +{
> +	int bar, size;
> +	u32 mask;
> +	u8 cmd;
> +
> +	pci_read_config_byte(dev, PCI_COMMAND, &cmd);
> +	pci_write_config_byte(dev, PCI_COMMAND,
> +			      cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY));
> +
> +	for (bar = 0; bar < max_bar; bar++) {
> +		resource_size_t last_addr;
> +
> +		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, 0xfffffffe);
> +		pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, &mask);
> +
> +		if (mask == 0 || mask == 0xffffffff) {
> +			DBG("  PCI: pbar%d set bad mask\n", bar);
> +			continue;
> +		}
> +
> +		if (mask & 0x01) { /* IO */
> +			size = -(mask & 0xfffffffe);
> +			DBG("  PCI: pbar%d: mask=%08x io %d bytes\n", bar, mask, size);
> +			if (last_mem + size > dev->bus->resource[0]->end) {
> +				DBG("BAR does not fit within bus IO res\n");
> +				return;
> +			}
> +			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, last_io);
> +			dev->resource[bar].flags = IORESOURCE_IO;
> +			last_addr = last_io;
> +			last_io += size;
> +		} else { /* MEM */
> +			size = -(mask & 0xfffffff0);
> +			DBG("  PCI: pbar%d: mask=%08x memory %d bytes\n", bar, mask, size);
> +			if (last_mem + size > dev->bus->resource[0]->end) {
> +				DBG("BAR does not fit within bus mem res\n");
> +				return;
> +			}
> +			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, last_mem);
> +			dev->resource[bar].flags = IORESOURCE_MEM;
> +			last_addr = last_mem;
> +			last_mem += size;
> +
> +			if ((mask & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
> +			    PCI_BASE_ADDRESS_MEM_TYPE_64) {
> +				dev->resource[bar].flags |= IORESOURCE_MEM_64;
> +				pci_write_config_dword(dev,
> +				       PCI_BASE_ADDRESS_1 + bar * 4, 0);
> +			}
> +		}
> +
> +		dev->resource[bar].start = last_addr;
> +		dev->resource[bar].end = last_addr + size - 1;
> +		if (dev->resource[bar].flags & IORESOURCE_MEM_64)
> +			bar++;
> +	}
> +
> +	pci_write_config_byte(dev, PCI_COMMAND, cmd);
> +	list_add_tail(&dev->bus_list, &dev->bus->devices);
> +	pci_register_device(dev);
> +}
> +
>  unsigned int pci_scan_bus(struct pci_bus *bus)
>  {
> +	struct pci_dev *dev;
>  	unsigned int devfn, l, max, class;
>  	unsigned char cmd, tmp, hdr_type, is_multi = 0;
> -	struct pci_dev *dev;
> -	resource_size_t last_mem;
> -	resource_size_t last_io;
> -
> -	/* FIXME: use res_start() */
> -	last_mem = bus->resource[0]->start;
> -	last_io = bus->resource[1]->start;
>  
>  	DBG("pci_scan_bus for bus %d\n", bus->number);
>  	DBG(" last_io = 0x%08x, last_mem = 0x%08x\n", last_io, last_mem);
>  	max = bus->secondary;
>  
>  	for (devfn = 0; devfn < 0xff; ++devfn) {
> -		int bar;
> -		u32 old_bar, mask;
> -		int size;
> -
>  		if (PCI_FUNC(devfn) && !is_multi) {
>  			/* not a multi-function device */
>  			continue;
> @@ -169,6 +228,8 @@ unsigned int pci_scan_bus(struct pci_bus *bus)
>  		dev->hdr_type = hdr_type;
>  
>  		DBG("PCI: class = %08x, hdr_type = %08x\n", class, hdr_type);
> +		DBG("PCI: %02x:%02x [%04x:%04x]\n", bus->number, dev->devfn,
> +		    dev->vendor, dev->device);
>  
>  		switch (hdr_type & 0x7f) {		    /* header type */
>  		case PCI_HEADER_TYPE_NORMAL:		    /* standard header */
> @@ -181,6 +242,8 @@ unsigned int pci_scan_bus(struct pci_bus *bus)
>  			 */
>  			pci_read_config_dword(dev, PCI_ROM_ADDRESS, &l);
>  			dev->rom_address = (l == 0xffffffff) ? 0 : l;
> +
> +			setup_device(dev, 6);
>  			break;
>  		default:				    /* unknown header */
>  		bad:
> @@ -189,62 +252,10 @@ unsigned int pci_scan_bus(struct pci_bus *bus)
>  			continue;
>  		}
>  
> -		DBG("PCI: %02x:%02x [%04x/%04x]\n", bus->number, dev->devfn, dev->vendor, dev->device);
> -
>  		if (class == PCI_CLASS_BRIDGE_HOST) {
>  			DBG("PCI: skip pci host bridge\n");
>  			continue;
>  		}
> -
> -		pci_read_config_byte(dev, PCI_COMMAND, &cmd);
> -		pci_write_config_byte(dev, PCI_COMMAND,
> -				      cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY));
> -
> -		for (bar = 0; bar < 6; bar++) {
> -			resource_size_t last_addr;
> -
> -			pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, &old_bar);
> -			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, 0xfffffffe);
> -			pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, &mask);
> -			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, old_bar);
> -
> -			if (mask == 0 || mask == 0xffffffff) {
> -				DBG("  PCI: pbar%d set bad mask\n", bar);
> -				continue;
> -			}
> -
> -			if (mask & 0x01) { /* IO */
> -				size = -(mask & 0xfffffffe);
> -				DBG("  PCI: pbar%d: mask=%08x io %d bytes\n", bar, mask, size);
> -				pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, last_io);
> -				dev->resource[bar].flags = IORESOURCE_IO;
> -				last_addr = last_io;
> -				last_io += size;
> -			} else { /* MEM */
> -				size = -(mask & 0xfffffff0);
> -				DBG("  PCI: pbar%d: mask=%08x memory %d bytes\n", bar, mask, size);
> -				pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, last_mem);
> -				dev->resource[bar].flags = IORESOURCE_MEM;
> -				last_addr = last_mem;
> -				last_mem += size;
> -
> -				if ((mask & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
> -				    PCI_BASE_ADDRESS_MEM_TYPE_64) {
> -					dev->resource[bar].flags |= IORESOURCE_MEM_64;
> -					pci_write_config_dword(dev,
> -					       PCI_BASE_ADDRESS_1 + bar * 4, 0);
> -				}
> -			}
> -
> -			dev->resource[bar].start = last_addr;
> -			dev->resource[bar].end = last_addr + size - 1;
> -			if (dev->resource[bar].flags & IORESOURCE_MEM_64)
> -				bar++;
> -		}
> -
> -		pci_write_config_byte(dev, PCI_COMMAND, cmd);
> -		list_add_tail(&dev->bus_list, &bus->devices);
> -		pci_register_device(dev);
>  	}
>  
>  	/*
> -- 
> 2.1.1
> 


-- 
-- 
Best regards,
  Antony Pavlov

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2014-10-07 15:46 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-07 15:42 [PATCH] clock.c: fix whitespaces Antony Pavlov
2014-10-07 15:42 ` [PATCH] pci: split out device init Antony Pavlov
2014-10-07 15:45   ` Antony Pavlov [this message]
2014-10-07 15:42 ` [PATCH] clock.c: fix whitespaces Antony Pavlov
2014-10-08  9:13   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141007194542.51a7baf6e0abec1d3e165ac2@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox