* [PATCH 0/5] ARM: SoCFPGA: Update files to Quartus 14.0
@ 2014-12-05 16:41 Steffen Trumtrar
2014-12-05 16:41 ` [PATCH 1/5] Documentation: boards: add socfpga Steffen Trumtrar
` (5 more replies)
0 siblings, 6 replies; 7+ messages in thread
From: Steffen Trumtrar @ 2014-12-05 16:41 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
Hi!
This series adds basic documentation for the SoCFPGA architecture in 1/5.
Then all handoff files and the sequencer code is updated to the current
Quartus II 14.0 versions.
The files are autogeneratd by Quartus, so I went for trying to not fix all
coding style errors, because I guess these will just keep coming with every
update. So, I didn't change anything that is not too bad.
Tested on both Socrates and Sockit.
Regards,
Steffen
Steffen Trumtrar (5):
Documentation: boards: add socfpga
ARM: socfpga: move iocsr from mach to board folder
ARM: socfpga: update sdram calibration to 14.0
ARM: socfpga: sockit: update handoff files to 14.0
ARM: socfpga: socrates: update handoff files to 14.0
Documentation/boards/socfpga.rst | 80 +++
.../boards/ebv-socrates/iocsr_config_cyclone5.c | 675 +++++++++++++++++++++
arch/arm/boards/ebv-socrates/lowlevel.c | 12 +-
arch/arm/boards/ebv-socrates/pinmux_config.c | 33 +-
arch/arm/boards/ebv-socrates/pll_config.h | 194 +++---
arch/arm/boards/ebv-socrates/sdram_config.h | 49 +-
.../terasic-sockit/iocsr_config_cyclone5.c} | 40 +-
arch/arm/boards/terasic-sockit/lowlevel.c | 12 +-
arch/arm/boards/terasic-sockit/pinmux_config.c | 29 +
arch/arm/boards/terasic-sockit/pll_config.h | 193 +++---
arch/arm/boards/terasic-sockit/sdram_config.h | 42 +-
arch/arm/boards/terasic-sockit/sequencer_auto.h | 121 +++-
.../boards/terasic-sockit/sequencer_auto_ac_init.c | 29 +
.../terasic-sockit/sequencer_auto_inst_init.c | 45 +-
arch/arm/boards/terasic-sockit/sequencer_defines.h | 48 +-
arch/arm/mach-socfpga/Makefile | 2 +-
arch/arm/mach-socfpga/include/mach/generic.h | 4 +-
arch/arm/mach-socfpga/include/mach/scan-manager.h | 16 +-
arch/arm/mach-socfpga/include/mach/sequencer.c | 154 +++--
arch/arm/mach-socfpga/include/mach/sequencer.h | 96 ++-
arch/arm/mach-socfpga/init.c | 12 +-
21 files changed, 1533 insertions(+), 353 deletions(-)
create mode 100644 Documentation/boards/socfpga.rst
create mode 100644 arch/arm/boards/ebv-socrates/iocsr_config_cyclone5.c
rename arch/arm/{mach-socfpga/iocsr-config-cyclone5.c => boards/terasic-sockit/iocsr_config_cyclone5.c} (79%)
--
2.1.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/5] Documentation: boards: add socfpga
2014-12-05 16:41 [PATCH 0/5] ARM: SoCFPGA: Update files to Quartus 14.0 Steffen Trumtrar
@ 2014-12-05 16:41 ` Steffen Trumtrar
2014-12-05 16:41 ` [PATCH 2/5] ARM: socfpga: move iocsr from mach to board folder Steffen Trumtrar
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Steffen Trumtrar @ 2014-12-05 16:41 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
Documentation/boards/socfpga.rst | 80 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 80 insertions(+)
create mode 100644 Documentation/boards/socfpga.rst
diff --git a/Documentation/boards/socfpga.rst b/Documentation/boards/socfpga.rst
new file mode 100644
index 000000000000..93831c5f290f
--- /dev/null
+++ b/Documentation/boards/socfpga.rst
@@ -0,0 +1,80 @@
+Altera SoCFPGA
+==============
+
+Alteras SoCFPGA SoCs have a two-stage boot process. The first stage is
+known as preloader which loads the second stage bootloader. barebox can act
+as both the first and the second stage loader.
+In barebox the preloader is called xload, so to build as a first stage loader,
+build the ``socfpga-xload_defconfig``; for second stage use the normal
+``socfpga_defconfig``.
+
+Bootstrapping
+-------------
+
+The supported bootsource is a SD card. The Boot ROM searches for a partition of
+type A2 and loads what it finds there. When barebox is placed in such a partition
+it will then itself try and mount the second partition of the SD card, which must
+be of type FAT32. On this partition barebox searches for a file called barebox.bin.
+
+To boot barebox on a Terasic SoCkit, the procedure is as follows (sdb1 is the A2 and
+sdb2 the FAT32 partition)::
+
+ mount -t fat /dev/sdb2 /mnt
+ make socfpga-xload_defconfig
+ make
+ make socfpga_defconfig
+ make
+
+barebox has now generated multiple files in the images directory. So for the SoCkit
+proceed with::
+
+ cat images/barebox-socfpga-sockit-xload.img > /dev/sdb1
+ cp images/barebox-socfpga-sockit.img /mnt/barebox.bin
+ umount /mnt
+
+For the EBV Socrates use ``images/barebox-socfpga-socrates(-xload).img`` instead.
+
+Updating handoff files
+----------------------
+
+(Tools needed: Quartus II + SoCEDS)
+
+As barebox uses some of the autogenerated files from Quartus II, every
+time Altera makes a new release, there might be some updates to the
+handoff files. As these files are split up in the code base and generated
+explicitely for some specific U-boot code base, some manual work might be
+necessary.
+
+The following files are generic and belong into the
+`arch/arm/mach-socfpga` directory tree:
+
+* sequencer.c (Not for the faint of heart.)
+* sequencer.h
+* system.h
+
+It should normally not be necessary to touch these if barebox is up-to-date.
+
+The boardspecific files for `arch/arm/boards/<yourboard>` are:
+
+* iocsr_config_cyclone5.c
+* pinmux_config_cyclone5.c -> pinmux_config.c
+* pll_config.h
+* sdram/sdram_config.h -> sdram_config.h
+* sequencer_auto.h
+* sequencer_auto_ac_init.c
+* sequencer_auto_inst_init.c
+* sequencer_defines.h
+
+To update the handoff files, the following procedure is necessary::
+
+ 1. Regenerate the project with Qsys
+ 2. Load up your project in Quartus II and assemble the design
+ 3. Go to the SoCEDS installation and run
+ ``./embedded_command_shell.sh``
+ 4. Now run ``bsp-editor``
+ 5. Create a new BSP
+ 6. Select the directory `hps_isw_handoff/soc_system_hps_0` under the
+ preloader settings directory
+ 7. Click ``Ok`` than ``Generate``
+ 8. Copy the files generated in `software/spl_bsp/generated/` to your
+ board folder
--
2.1.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 2/5] ARM: socfpga: move iocsr from mach to board folder
2014-12-05 16:41 [PATCH 0/5] ARM: SoCFPGA: Update files to Quartus 14.0 Steffen Trumtrar
2014-12-05 16:41 ` [PATCH 1/5] Documentation: boards: add socfpga Steffen Trumtrar
@ 2014-12-05 16:41 ` Steffen Trumtrar
2014-12-05 16:41 ` [PATCH 3/5] ARM: socfpga: update sdram calibration to 14.0 Steffen Trumtrar
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Steffen Trumtrar @ 2014-12-05 16:41 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
The current iocsr-config-cyclone5.c is actually board specific, although the
file name suggests otherwise.
As the file was generated for the SoCkit, move it there and add a new one
for the socrates.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
.../boards/ebv-socrates/iocsr_config_cyclone5.c | 648 +++++++++++++++++++++
arch/arm/boards/ebv-socrates/lowlevel.c | 12 +-
.../terasic-sockit/iocsr_config_cyclone5.c} | 9 +-
arch/arm/boards/terasic-sockit/lowlevel.c | 12 +-
arch/arm/mach-socfpga/Makefile | 2 +-
arch/arm/mach-socfpga/include/mach/generic.h | 4 +-
arch/arm/mach-socfpga/include/mach/scan-manager.h | 16 +-
arch/arm/mach-socfpga/init.c | 12 +-
8 files changed, 690 insertions(+), 25 deletions(-)
create mode 100644 arch/arm/boards/ebv-socrates/iocsr_config_cyclone5.c
rename arch/arm/{mach-socfpga/iocsr-config-cyclone5.c => boards/terasic-sockit/iocsr_config_cyclone5.c} (95%)
diff --git a/arch/arm/boards/ebv-socrates/iocsr_config_cyclone5.c b/arch/arm/boards/ebv-socrates/iocsr_config_cyclone5.c
new file mode 100644
index 000000000000..aa02724643e8
--- /dev/null
+++ b/arch/arm/boards/ebv-socrates/iocsr_config_cyclone5.c
@@ -0,0 +1,648 @@
+/* This file is generated by Preloader Generator */
+
+#include <mach/scan-manager.h>
+
+static const unsigned long iocsr_scan_chain0_table[((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH / 32) + 1)] = {
+ 0x00000000,
+ 0x00000000,
+ 0x0FF00000,
+ 0xC0000000,
+ 0x0000003F,
+ 0x00008000,
+ 0x00060180,
+ 0x18060000,
+ 0x18000000,
+ 0x00018060,
+ 0x00000000,
+ 0x00004000,
+ 0x000300C0,
+ 0x0C030000,
+ 0x0C000000,
+ 0x00000030,
+ 0x0000C030,
+ 0x00002000,
+ 0x00018060,
+ 0x06018000,
+ 0x06000000,
+ 0x00000018,
+ 0x00006018,
+ 0x00001000,
+};
+
+static const unsigned long iocsr_scan_chain1_table[((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)] = {
+ 0x000C0300,
+ 0x300C0000,
+ 0x300000C0,
+ 0x000000C0,
+ 0x000300C0,
+ 0x00008000,
+ 0x00060180,
+ 0x18060000,
+ 0x18000000,
+ 0x00000060,
+ 0x00018060,
+ 0x00004000,
+ 0x000300C0,
+ 0x0C030000,
+ 0x0C000000,
+ 0x00000030,
+ 0x0000C030,
+ 0x00002000,
+ 0x06018060,
+ 0x06018000,
+ 0x01FE0000,
+ 0xF8000000,
+ 0x00000007,
+ 0x00001000,
+ 0x0000C030,
+ 0x0300C000,
+ 0x03000000,
+ 0x0000300C,
+ 0x0000300C,
+ 0x00000800,
+ 0x00000000,
+ 0x00000000,
+ 0x01800000,
+ 0x00000006,
+ 0x00001806,
+ 0x00000400,
+ 0x00000000,
+ 0x00C03000,
+ 0x00000003,
+ 0x00000000,
+ 0x00000000,
+ 0x00000200,
+ 0x00601806,
+ 0x00000000,
+ 0x80600000,
+ 0x80000601,
+ 0x00000601,
+ 0x00000100,
+ 0x00300C03,
+ 0xC0300C00,
+ 0xC0300000,
+ 0xC0000300,
+ 0x000C0300,
+ 0x00000080,
+};
+
+static const unsigned long iocsr_scan_chain2_table[((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)] = {
+ 0x300C0300,
+ 0x00000000,
+ 0x0FF00000,
+ 0x00000000,
+ 0x0C0300C0,
+ 0x00008000,
+ 0x18060180,
+ 0x18060000,
+ 0x18000100,
+ 0x00018060,
+ 0x00018060,
+ 0x00004000,
+ 0x200700C0,
+ 0x0C030000,
+ 0x00000030,
+ 0x00000000,
+ 0x0300C030,
+ 0x00002000,
+ 0x10018060,
+ 0x06018000,
+ 0x06000000,
+ 0x00010038,
+ 0x00006018,
+ 0x00001000,
+ 0x0000C030,
+ 0x00000000,
+ 0x03000000,
+ 0x0000800C,
+ 0x00C0300C,
+ 0x00000800,
+};
+
+static const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH / 32) + 1)] = {
+ 0x0CC20D80,
+ 0x8C3000FF,
+ 0x0A804001,
+ 0x07900000,
+ 0x08020000,
+ 0x00100000,
+ 0x0A800000,
+ 0x07900000,
+ 0x08020000,
+ 0x00100000,
+ 0x20430000,
+ 0x0C003001,
+ 0x00C00481,
+ 0x00000000,
+ 0x00000021,
+ 0x82000004,
+ 0x05400000,
+ 0x03C80000,
+ 0x04010000,
+ 0x00080000,
+ 0x05400000,
+ 0x03C80000,
+ 0x05400000,
+ 0x03C80000,
+ 0x90218000,
+ 0x86001800,
+ 0x00600240,
+ 0x80090218,
+ 0x00000001,
+ 0x40000002,
+ 0x02A00000,
+ 0x01E40000,
+ 0x02A00000,
+ 0x01E40000,
+ 0x02A00000,
+ 0x01E40000,
+ 0x02A00000,
+ 0x01E40000,
+ 0x4810C000,
+ 0x43000C00,
+ 0x00300120,
+ 0xC004810C,
+ 0x12043000,
+ 0x20000300,
+ 0x00040000,
+ 0x50670000,
+ 0x00000010,
+ 0x24590000,
+ 0x00001000,
+ 0xA0000034,
+ 0x0D000001,
+ 0xA0680514,
+ 0xCF034069,
+ 0x1E781A03,
+ 0x805140D0,
+ 0x34069A06,
+ 0x01A03CF0,
+ 0x340D0000,
+ 0x1860680D,
+ 0x03CF0340,
+ 0xD000001A,
+ 0x0680D340,
+ 0x10040000,
+ 0x00200000,
+ 0x10040000,
+ 0x00200000,
+ 0x15000000,
+ 0x0F200000,
+ 0x15000000,
+ 0x0F200000,
+ 0x01FE0000,
+ 0x18000000,
+ 0x01800902,
+ 0x00240860,
+ 0x007F8006,
+ 0x00000000,
+ 0x0A800001,
+ 0x07900000,
+ 0x0A800000,
+ 0x07900000,
+ 0x0A800000,
+ 0x07900000,
+ 0x08020000,
+ 0x00100000,
+ 0x20430000,
+ 0x0C003001,
+ 0x00C00481,
+ 0x00000FF0,
+ 0x4810C000,
+ 0x80000C00,
+ 0x05400000,
+ 0x02480000,
+ 0x04000000,
+ 0x00080000,
+ 0x05400000,
+ 0x03C80000,
+ 0x05400000,
+ 0x03C80000,
+ 0x90218000,
+ 0x86001800,
+ 0x00600240,
+ 0x80090218,
+ 0x24086001,
+ 0x40000600,
+ 0x02A00040,
+ 0x01E40000,
+ 0x02A00000,
+ 0x01E40000,
+ 0x02A00000,
+ 0x01E40000,
+ 0x02A00000,
+ 0x01E40000,
+ 0x4810C000,
+ 0x43000C00,
+ 0x00300120,
+ 0xC004810C,
+ 0x12043000,
+ 0x20000300,
+ 0x00040000,
+ 0x50670000,
+ 0x00000010,
+ 0x24590000,
+ 0x00001000,
+ 0xA0000034,
+ 0x0D000001,
+ 0x60680D34,
+ 0xCF034018,
+ 0x0E381A03,
+ 0x80D340D0,
+ 0x34018606,
+ 0x01A00040,
+ 0x340D0002,
+ 0x1860680D,
+ 0x03CF0340,
+ 0xD01E781A,
+ 0x06805140,
+ 0x10040000,
+ 0x00200000,
+ 0x10040000,
+ 0x00200000,
+ 0x15000000,
+ 0x0F200000,
+ 0x15000000,
+ 0x0F200000,
+ 0x01FE0000,
+ 0x18000000,
+ 0x01800902,
+ 0x00240860,
+ 0x007F8006,
+ 0x00000000,
+ 0x99300001,
+ 0x34343400,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0x00040100,
+ 0x00000800,
+ 0x00000000,
+ 0x00001208,
+ 0x00482000,
+ 0x01000000,
+ 0x00000000,
+ 0x00410482,
+ 0x0006A000,
+ 0x0001B400,
+ 0x00020000,
+ 0x00000400,
+ 0x0002A000,
+ 0x0001E400,
+ 0x5506A000,
+ 0x00E1D400,
+ 0x00000000,
+ 0x2043090C,
+ 0x00003001,
+ 0x90400000,
+ 0x00000000,
+ 0x2020C243,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x00010040,
+ 0x00000200,
+ 0x00000000,
+ 0x00000482,
+ 0x00120800,
+ 0x00002000,
+ 0x80000000,
+ 0x00104120,
+ 0x00000200,
+ 0xAC0D5F80,
+ 0xFFFFFFFF,
+ 0x14F3690D,
+ 0x1A041414,
+ 0x00D00000,
+ 0x18864000,
+ 0x49247A06,
+ 0xF228A3D5,
+ 0xF6D1451E,
+ 0x0342E388,
+ 0x821A0000,
+ 0x0000D000,
+ 0x028A0680,
+ 0xD949247A,
+ 0x1EF228A3,
+ 0x88F6D145,
+ 0x000352E3,
+ 0x00080200,
+ 0x00001000,
+ 0x00080200,
+ 0x00001000,
+ 0x000A8000,
+ 0x00075000,
+ 0x541A8000,
+ 0x03875001,
+ 0x10000000,
+ 0x00000000,
+ 0x0080C000,
+ 0x41000000,
+ 0x00003FC2,
+ 0x00820000,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0x00040100,
+ 0x00000800,
+ 0x00000000,
+ 0x00001208,
+ 0x00482000,
+ 0x00008000,
+ 0x00000000,
+ 0x00410482,
+ 0x0006A000,
+ 0x0001B400,
+ 0x00020000,
+ 0x00000400,
+ 0x00020080,
+ 0x00000400,
+ 0x5506A000,
+ 0x00E1D400,
+ 0x00000000,
+ 0x0000090C,
+ 0x00000010,
+ 0x90400000,
+ 0x00000000,
+ 0x2020C243,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x00015000,
+ 0x0000F200,
+ 0x00000000,
+ 0x00000482,
+ 0x86120800,
+ 0x00600240,
+ 0x80000000,
+ 0x00104120,
+ 0x00000200,
+ 0xAC0D5F80,
+ 0xFFFFFFFF,
+ 0x14F3690D,
+ 0x1A041414,
+ 0x00D00000,
+ 0x18864000,
+ 0x49247A06,
+ 0xF3CF23D5,
+ 0xF4D1451E,
+ 0x034A9248,
+ 0x821A00C3,
+ 0x0000D000,
+ 0x00000680,
+ 0xD949247A,
+ 0x1EF3CF23,
+ 0x88F4D145,
+ 0x000352E3,
+ 0x00080200,
+ 0x00001000,
+ 0x00080200,
+ 0x00001000,
+ 0x000A8000,
+ 0x00075000,
+ 0x541A8000,
+ 0x03875001,
+ 0x10000000,
+ 0x00000000,
+ 0x0080C000,
+ 0x41000000,
+ 0x04000002,
+ 0x00820000,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0x00040100,
+ 0x00000800,
+ 0x00000000,
+ 0x00001208,
+ 0x00482000,
+ 0x00008000,
+ 0x00000000,
+ 0x00410482,
+ 0x0006A000,
+ 0x0001B400,
+ 0x00020000,
+ 0x00000400,
+ 0x0002A000,
+ 0x0001E400,
+ 0x5506A000,
+ 0x00E1D400,
+ 0x00000000,
+ 0x2043090C,
+ 0x00003001,
+ 0x90400000,
+ 0x00000000,
+ 0x2020C243,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x00010040,
+ 0x00000200,
+ 0x00000000,
+ 0x00000482,
+ 0x00120800,
+ 0x00002000,
+ 0x80000000,
+ 0x00104120,
+ 0x00000200,
+ 0xAC0D5F80,
+ 0xFFFFFFFF,
+ 0x14F3690D,
+ 0x1A041414,
+ 0x00D00000,
+ 0x18864000,
+ 0x49247A06,
+ 0xF228A3D9,
+ 0xF4D1451E,
+ 0x034A9248,
+ 0x821A0000,
+ 0x0000D000,
+ 0x00000680,
+ 0xD949247A,
+ 0x1EF228A3,
+ 0x88F4D145,
+ 0x000352E3,
+ 0x00080200,
+ 0x00001000,
+ 0x00080200,
+ 0x00001000,
+ 0x000A8000,
+ 0x00075000,
+ 0x541A8000,
+ 0x03875001,
+ 0x10000000,
+ 0x00000000,
+ 0x0080C000,
+ 0x41000000,
+ 0x04000002,
+ 0x00820000,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0x00040100,
+ 0x00000800,
+ 0x00000000,
+ 0x00001208,
+ 0x00482000,
+ 0x00008000,
+ 0x00000000,
+ 0x00410482,
+ 0x0006A000,
+ 0x0001B400,
+ 0x00020000,
+ 0x00000400,
+ 0x00020080,
+ 0x00000400,
+ 0x5506A000,
+ 0x00E1D400,
+ 0x00000000,
+ 0x0000090C,
+ 0x00000010,
+ 0x90400000,
+ 0x00000000,
+ 0x2020C243,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x00010040,
+ 0x00000200,
+ 0x00000000,
+ 0x00000482,
+ 0x00120800,
+ 0x00400000,
+ 0x80000000,
+ 0x00104120,
+ 0x00000200,
+ 0xAC0D5F80,
+ 0xFFFFFFFF,
+ 0x14F1690D,
+ 0x1A041414,
+ 0x00D00000,
+ 0x08864000,
+ 0x49247A02,
+ 0xF3CF23D9,
+ 0xF4D1451E,
+ 0x0342E388,
+ 0x821A0000,
+ 0x0000D000,
+ 0x00000680,
+ 0xD949247A,
+ 0x1EF3CF23,
+ 0x88F4DE79,
+ 0x000342A2,
+ 0x00080200,
+ 0x00001000,
+ 0x00080200,
+ 0x00001000,
+ 0x000A8000,
+ 0x00075000,
+ 0x541A8000,
+ 0x03875001,
+ 0x10000000,
+ 0x00000000,
+ 0x0080C000,
+ 0x41000000,
+ 0x04000002,
+ 0x00820000,
+ 0x00489800,
+ 0x801A1A1A,
+ 0x00000200,
+ 0x80000004,
+ 0x00000200,
+ 0x80000004,
+ 0x00000200,
+ 0x80000004,
+ 0x00000200,
+ 0x00000004,
+ 0x00040000,
+ 0x10000000,
+ 0x00000000,
+ 0x00000040,
+ 0x00010000,
+ 0x40002000,
+ 0x00000100,
+ 0x40000002,
+ 0x00000100,
+ 0x40000002,
+ 0x00000100,
+ 0x40000002,
+ 0x00000100,
+ 0x00000002,
+ 0x00020000,
+ 0x08000000,
+ 0x00000000,
+ 0x00000020,
+ 0x00008000,
+ 0x20001000,
+ 0x00000080,
+ 0x20000001,
+ 0x00000080,
+ 0x20000001,
+ 0x00000080,
+ 0x20000001,
+ 0x00000080,
+ 0x00000001,
+ 0x00010000,
+ 0x04000000,
+ 0x00FF0000,
+ 0x00000000,
+ 0x00004000,
+ 0x00000800,
+ 0xC0000001,
+ 0x00041419,
+ 0x40000000,
+ 0x04000816,
+ 0x000D0000,
+ 0x00006800,
+ 0x00000340,
+ 0xD000001A,
+ 0x06800000,
+ 0x00340000,
+ 0x0001A000,
+ 0x00000D00,
+ 0x40000068,
+ 0x1A000003,
+ 0x00D00000,
+ 0x00068000,
+ 0x00003400,
+ 0x000001A0,
+ 0x00000401,
+ 0x00000008,
+ 0x00000401,
+ 0x00000008,
+ 0x00000401,
+ 0x00000008,
+ 0x00000401,
+ 0x80000008,
+ 0x0000007F,
+ 0x20000000,
+ 0x00000000,
+ 0xE0000080,
+ 0x0000001F,
+ 0x00004000,
+};
+
diff --git a/arch/arm/boards/ebv-socrates/lowlevel.c b/arch/arm/boards/ebv-socrates/lowlevel.c
index 9c1154320954..7fc81678ef39 100644
--- a/arch/arm/boards/ebv-socrates/lowlevel.c
+++ b/arch/arm/boards/ebv-socrates/lowlevel.c
@@ -16,6 +16,7 @@
#include <mach/sequencer.c>
#include "sequencer_auto_inst_init.c"
#include "sequencer_auto_ac_init.c"
+#include "iocsr_config_cyclone5.c"
static inline void ledon(void)
{
@@ -58,6 +59,7 @@ ENTRY_FUNCTION(start_socfpga_socrates, r0, r1, r2)
static noinline void socrates_entry(void)
{
+ struct socfpga_io_config io_config;
int ret;
arm_early_mmu_cache_invalidate();
@@ -65,8 +67,14 @@ static noinline void socrates_entry(void)
relocate_to_current_adr();
setup_c();
- socfpga_lowlevel_init(&cm_default_cfg,
- sys_mgr_init_table, ARRAY_SIZE(sys_mgr_init_table));
+ io_config.pinmux = sys_mgr_init_table;
+ io_config.num_pin = ARRAY_SIZE(sys_mgr_init_table);
+ io_config.iocsr_emac_mixed2 = iocsr_scan_chain0_table;
+ io_config.iocsr_mixed1_flash = iocsr_scan_chain1_table;
+ io_config.iocsr_general = iocsr_scan_chain2_table;
+ io_config.iocsr_ddr = iocsr_scan_chain3_table;
+
+ socfpga_lowlevel_init(&cm_default_cfg, &io_config);
puts_ll("lowlevel init done\n");
puts_ll("SDRAM setup...\n");
diff --git a/arch/arm/mach-socfpga/iocsr-config-cyclone5.c b/arch/arm/boards/terasic-sockit/iocsr_config_cyclone5.c
similarity index 95%
rename from arch/arm/mach-socfpga/iocsr-config-cyclone5.c
rename to arch/arm/boards/terasic-sockit/iocsr_config_cyclone5.c
index 44238b3b3e08..96045d50d68d 100644
--- a/arch/arm/mach-socfpga/iocsr-config-cyclone5.c
+++ b/arch/arm/boards/terasic-sockit/iocsr_config_cyclone5.c
@@ -1,9 +1,8 @@
/* This file is generated by Preloader Generator */
-#include <common.h>
#include <mach/scan-manager.h>
-const unsigned long iocsr_scan_chain0_table[((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH / 32) + 1)] = {
+static const unsigned long iocsr_scan_chain0_table[((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH / 32) + 1)] = {
0x00000000,
0x00000000,
0x0FF00000,
@@ -30,7 +29,7 @@ const unsigned long iocsr_scan_chain0_table[((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH
0x00001000,
};
-const unsigned long iocsr_scan_chain1_table[((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)] = {
+static const unsigned long iocsr_scan_chain1_table[((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)] = {
0x00100000,
0x300C0000,
0x300000C0,
@@ -87,7 +86,7 @@ const unsigned long iocsr_scan_chain1_table[((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH
0x00000080,
};
-const unsigned long iocsr_scan_chain2_table[((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)] = {
+static const unsigned long iocsr_scan_chain2_table[((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)] = {
0x300C0300,
0x00000000,
0x0FF00000,
@@ -120,7 +119,7 @@ const unsigned long iocsr_scan_chain2_table[((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH
0x00000800,
};
-const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH / 32) + 1)] = {
+static const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH / 32) + 1)] = {
0x0C420D80,
0x882000FF,
0x0A804001,
diff --git a/arch/arm/boards/terasic-sockit/lowlevel.c b/arch/arm/boards/terasic-sockit/lowlevel.c
index 5b3b89a92417..0683435a7b61 100644
--- a/arch/arm/boards/terasic-sockit/lowlevel.c
+++ b/arch/arm/boards/terasic-sockit/lowlevel.c
@@ -16,6 +16,7 @@
#include <mach/sequencer.c>
#include "sequencer_auto_inst_init.c"
#include "sequencer_auto_ac_init.c"
+#include "iocsr_config_cyclone5.c"
static inline void ledon(int led)
{
@@ -58,6 +59,7 @@ ENTRY_FUNCTION(start_socfpga_sockit, r0, r1, r2)
static noinline void sockit_entry(void)
{
+ struct socfpga_io_config io_config;
int ret;
arm_early_mmu_cache_invalidate();
@@ -65,8 +67,14 @@ static noinline void sockit_entry(void)
relocate_to_current_adr();
setup_c();
- socfpga_lowlevel_init(&cm_default_cfg,
- sys_mgr_init_table, ARRAY_SIZE(sys_mgr_init_table));
+ io_config.pinmux = sys_mgr_init_table;
+ io_config.num_pin = ARRAY_SIZE(sys_mgr_init_table);
+ io_config.iocsr_emac_mixed2 = iocsr_scan_chain0_table;
+ io_config.iocsr_mixed1_flash = iocsr_scan_chain1_table;
+ io_config.iocsr_general = iocsr_scan_chain2_table;
+ io_config.iocsr_ddr = iocsr_scan_chain3_table;
+
+ socfpga_lowlevel_init(&cm_default_cfg, &io_config);
puts_ll("lowlevel init done\n");
puts_ll("SDRAM setup...\n");
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 12585c547673..b81d57da26fd 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -1,5 +1,5 @@
obj-y += generic.o nic301.o bootsource.o reset-manager.o
pbl-y += init.o freeze-controller.o scan-manager.o system-manager.o
-pbl-y += clock-manager.o iocsr-config-cyclone5.o
+pbl-y += clock-manager.o
obj-$(CONFIG_ARCH_SOCFPGA_XLOAD) += xload.o
obj-$(CONFIG_ARCH_SOCFPGA_FPGA) += fpga.o
diff --git a/arch/arm/mach-socfpga/include/mach/generic.h b/arch/arm/mach-socfpga/include/mach/generic.h
index cb7f8e692824..2f5cda0d0263 100644
--- a/arch/arm/mach-socfpga/include/mach/generic.h
+++ b/arch/arm/mach-socfpga/include/mach/generic.h
@@ -3,8 +3,10 @@
struct socfpga_cm_config;
+struct socfpga_io_config;
+
void socfpga_lowlevel_init(struct socfpga_cm_config *cm_config,
- unsigned long *pinmux, int num_pinmux);
+ struct socfpga_io_config *io_config);
static inline void __udelay(unsigned us)
{
diff --git a/arch/arm/mach-socfpga/include/mach/scan-manager.h b/arch/arm/mach-socfpga/include/mach/scan-manager.h
index e815e2f33bac..568bedfde13c 100644
--- a/arch/arm/mach-socfpga/include/mach/scan-manager.h
+++ b/arch/arm/mach-socfpga/include/mach/scan-manager.h
@@ -119,13 +119,13 @@ int scan_mgr_io_scan_chain_prg(enum io_scan_chain io_scan_chain_id,
uint32_t io_scan_chain_len_in_bits,
const unsigned long *iocsr_scan_chain);
-extern const unsigned long iocsr_scan_chain0_table[
- ((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH / 32) + 1)];
-extern const unsigned long iocsr_scan_chain1_table[
- ((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)];
-extern const unsigned long iocsr_scan_chain2_table[
- ((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)];
-extern const unsigned long iocsr_scan_chain3_table[
- ((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH / 32) + 1)];
+struct socfpga_io_config {
+ unsigned long *pinmux;
+ unsigned int num_pin;
+ const unsigned long *iocsr_emac_mixed2;
+ const unsigned long *iocsr_mixed1_flash;
+ const unsigned long *iocsr_general;
+ const unsigned long *iocsr_ddr;
+};
#endif /* _SCAN_MANAGER_H_ */
diff --git a/arch/arm/mach-socfpga/init.c b/arch/arm/mach-socfpga/init.c
index 85002844d750..0c679e3d2dac 100644
--- a/arch/arm/mach-socfpga/init.c
+++ b/arch/arm/mach-socfpga/init.c
@@ -10,7 +10,7 @@
#include <mach/generic.h>
void socfpga_lowlevel_init(struct socfpga_cm_config *cm_config,
- unsigned long *pinmux, int num_pinmux)
+ struct socfpga_io_config *io_config)
{
uint32_t val;
@@ -34,13 +34,13 @@ void socfpga_lowlevel_init(struct socfpga_cm_config *cm_config,
debug("Configure IOCSR\n");
/* configure the IOCSR through scan chain */
- scan_mgr_io_scan_chain_prg(IO_SCAN_CHAIN_0, CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH, iocsr_scan_chain0_table);
- scan_mgr_io_scan_chain_prg(IO_SCAN_CHAIN_1, CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH, iocsr_scan_chain1_table);
- scan_mgr_io_scan_chain_prg(IO_SCAN_CHAIN_2, CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH, iocsr_scan_chain2_table);
- scan_mgr_io_scan_chain_prg(IO_SCAN_CHAIN_3, CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH, iocsr_scan_chain3_table);
+ scan_mgr_io_scan_chain_prg(IO_SCAN_CHAIN_0, CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH, io_config->iocsr_emac_mixed2);
+ scan_mgr_io_scan_chain_prg(IO_SCAN_CHAIN_1, CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH, io_config->iocsr_mixed1_flash);
+ scan_mgr_io_scan_chain_prg(IO_SCAN_CHAIN_2, CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH, io_config->iocsr_general);
+ scan_mgr_io_scan_chain_prg(IO_SCAN_CHAIN_3, CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH, io_config->iocsr_ddr);
/* configure the pin muxing through system manager */
- socfpga_sysmgr_pinmux_init(pinmux, num_pinmux);
+ socfpga_sysmgr_pinmux_init(io_config->pinmux, io_config->num_pin);
writel(RSTMGR_PERMODRST_L4WD0 | RSTMGR_PERMODRST_L4WD1,
CYCLONE5_RSTMGR_ADDRESS + RESET_MGR_PER_MOD_RESET_OFS);
--
2.1.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 3/5] ARM: socfpga: update sdram calibration to 14.0
2014-12-05 16:41 [PATCH 0/5] ARM: SoCFPGA: Update files to Quartus 14.0 Steffen Trumtrar
2014-12-05 16:41 ` [PATCH 1/5] Documentation: boards: add socfpga Steffen Trumtrar
2014-12-05 16:41 ` [PATCH 2/5] ARM: socfpga: move iocsr from mach to board folder Steffen Trumtrar
@ 2014-12-05 16:41 ` Steffen Trumtrar
2014-12-05 16:41 ` [PATCH 4/5] ARM: socfpga: sockit: update handoff files " Steffen Trumtrar
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Steffen Trumtrar @ 2014-12-05 16:41 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
arch/arm/mach-socfpga/include/mach/sequencer.c | 154 ++++++++++++++-----------
arch/arm/mach-socfpga/include/mach/sequencer.h | 96 +++++++++++----
2 files changed, 159 insertions(+), 91 deletions(-)
diff --git a/arch/arm/mach-socfpga/include/mach/sequencer.c b/arch/arm/mach-socfpga/include/mach/sequencer.c
index 6e69d1becc80..87dc6677ec8b 100644
--- a/arch/arm/mach-socfpga/include/mach/sequencer.c
+++ b/arch/arm/mach-socfpga/include/mach/sequencer.c
@@ -1,29 +1,30 @@
/*
-Copyright (c) 2012, Altera Corporation
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- * Neither the name of Altera Corporation nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
-DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
+ * Copyright Altera Corporation (C) 2012-2014. All rights reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Altera Corporation nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
#include <common.h>
#include <io.h>
@@ -1160,32 +1161,29 @@ static void rw_mgr_mem_initialize (void)
/* start with memory RESET activated */
- /* tINIT = 200us */
-
- /*
- * 200us @ 266MHz (3.75 ns) ~ 54000 clock cycles
- * If a and b are the number of iteration in 2 nested loops
- * it takes the following number of cycles to complete the operation:
- * number_of_cycles = ((2 + n) * a + 2) * b
- * where n is the number of instruction in the inner loop
- * One possible solution is n = 0 , a = 256 , b = 106 => a = FF,
- * b = 6A
+ /* tINIT is typically 200us (but can be adjusted in the GUI)
+ * The total number of cycles required for this nested counter structure to
+ * complete is defined by:
+ * num_cycles = (CTR2 + 1) * [(CTR1 + 1) * (2 * (CTR0 + 1) + 1) + 1] + 1
*/
/* Load counters */
IOWR_32DIRECT(RW_MGR_LOAD_CNTR_0, 0,
- SKIP_DELAY_LOOP_VALUE_OR_ZERO(0xFF));
+ SKIP_DELAY_LOOP_VALUE_OR_ZERO(SEQ_TINIT_CNTR0_VAL));
IOWR_32DIRECT(RW_MGR_LOAD_CNTR_1, 0,
- SKIP_DELAY_LOOP_VALUE_OR_ZERO(0x6A));
+ SKIP_DELAY_LOOP_VALUE_OR_ZERO(SEQ_TINIT_CNTR1_VAL));
+ IOWR_32DIRECT(RW_MGR_LOAD_CNTR_2, 0,
+ SKIP_DELAY_LOOP_VALUE_OR_ZERO(SEQ_TINIT_CNTR2_VAL));
/* Load jump address */
IOWR_32DIRECT(RW_MGR_LOAD_JUMP_ADD_0, 0,
__RW_MGR_INIT_RESET_0_CKE_0);
IOWR_32DIRECT(RW_MGR_LOAD_JUMP_ADD_1, 0,
- __RW_MGR_INIT_RESET_0_CKE_0_inloop);
+ __RW_MGR_INIT_RESET_0_CKE_0);
+ IOWR_32DIRECT(RW_MGR_LOAD_JUMP_ADD_2, 0,
+ __RW_MGR_INIT_RESET_0_CKE_0);
/* Execute count instruction */
- /* IOWR_32DIRECT(BASE_RW_MGR, 0, __RW_MGR_COUNT_REG_0); */
IOWR_32DIRECT(RW_MGR_RUN_SINGLE_GROUP, 0, __RW_MGR_INIT_RESET_0_CKE_0);
/* indicate that memory is stable */
@@ -1194,26 +1192,21 @@ static void rw_mgr_mem_initialize (void)
/* transition the RESET to high */
/* Wait for 500us */
- /*
- * 500us @ 266MHz (3.75 ns) ~ 134000 clock cycles
- * If a and b are the number of iteration in 2 nested loops
- * it takes the following number of cycles to complete the operation
- * number_of_cycles = ((2 + n) * a + 2) * b
- * where n is the number of instruction in the inner loop
- * One possible solution is n = 2 , a = 131 , b = 256 => a = 83,
- * b = FF
- */
+ /* num_cycles = (CTR2 + 1) * [(CTR1 + 1) * (2 * (CTR0 + 1) + 1) + 1] + 1 */
/* Load counters */
IOWR_32DIRECT(RW_MGR_LOAD_CNTR_0, 0,
- SKIP_DELAY_LOOP_VALUE_OR_ZERO(0x83));
+ SKIP_DELAY_LOOP_VALUE_OR_ZERO(SEQ_TRESET_CNTR0_VAL));
IOWR_32DIRECT(RW_MGR_LOAD_CNTR_1, 0,
- SKIP_DELAY_LOOP_VALUE_OR_ZERO(0xFF));
+ SKIP_DELAY_LOOP_VALUE_OR_ZERO(SEQ_TRESET_CNTR1_VAL));
+ IOWR_32DIRECT(RW_MGR_LOAD_CNTR_2, 0,
+ SKIP_DELAY_LOOP_VALUE_OR_ZERO(SEQ_TRESET_CNTR2_VAL));
/* Load jump address */
IOWR_32DIRECT(RW_MGR_LOAD_JUMP_ADD_0, 0, __RW_MGR_INIT_RESET_1_CKE_0);
- IOWR_32DIRECT(RW_MGR_LOAD_JUMP_ADD_1, 0,
- __RW_MGR_INIT_RESET_1_CKE_0_inloop_1);
+ IOWR_32DIRECT(RW_MGR_LOAD_JUMP_ADD_1, 0, __RW_MGR_INIT_RESET_1_CKE_0);
+ IOWR_32DIRECT(RW_MGR_LOAD_JUMP_ADD_2, 0, __RW_MGR_INIT_RESET_1_CKE_0);
+
IOWR_32DIRECT(RW_MGR_RUN_SINGLE_GROUP, 0, __RW_MGR_INIT_RESET_1_CKE_0);
@@ -1305,27 +1298,28 @@ static void rw_mgr_mem_initialize (void)
/* tINIT = 200us */
- /* 200us @ 300MHz (3.33 ns) ~ 60000 clock cycles
- * If a and b are the number of iteration in 2 nested loops
- * it takes the following number of cycles to complete the operation:
- * number_of_cycles = ((2 + n) * b + 2) * a
- * where n is the number of instruction in the inner loop
- * One possible solution is n = 0 , a = 256 , b = 118 => a = FF,
- * b = 76
- */
+ /* tINIT is typically 200us (but can be adjusted in the GUI)
+ * The total number of cycles required for this nested counter structure to
+ * complete is defined by:
+ * num_cycles = (CTR0 + 1) * [(CTR1 + 1) * (2 * (CTR2 + 1) + 1) + 1] + 1
+ */
/*TODO: Need to manage multi-rank */
/* Load counters */
- IOWR_32DIRECT(RW_MGR_LOAD_CNTR_0, 0, SKIP_DELAY_LOOP_VALUE_OR_ZERO(0xFF));
- IOWR_32DIRECT(RW_MGR_LOAD_CNTR_1, 0, SKIP_DELAY_LOOP_VALUE_OR_ZERO(0x76));
+ IOWR_32DIRECT(RW_MGR_LOAD_CNTR_0, 0,
+ SKIP_DELAY_LOOP_VALUE_OR_ZERO(SEQ_TINIT_CNTR0_VAL));
+ IOWR_32DIRECT(RW_MGR_LOAD_CNTR_1, 0,
+ SKIP_DELAY_LOOP_VALUE_OR_ZERO(SEQ_TINIT_CNTR1_VAL));
+ IOWR_32DIRECT(RW_MGR_LOAD_CNTR_2, 0,
+ SKIP_DELAY_LOOP_VALUE_OR_ZERO(SEQ_TINIT_CNTR2_VAL));
/* Load jump address */
IOWR_32DIRECT(RW_MGR_LOAD_JUMP_ADD_0, 0, __RW_MGR_INIT_CKE_0);
- IOWR_32DIRECT(RW_MGR_LOAD_JUMP_ADD_1, 0, __RW_MGR_INIT_CKE_0_inloop);
+ IOWR_32DIRECT(RW_MGR_LOAD_JUMP_ADD_1, 0, __RW_MGR_INIT_CKE_0);
+ IOWR_32DIRECT(RW_MGR_LOAD_JUMP_ADD_2, 0, __RW_MGR_INIT_CKE_0);
/* Execute count instruction */
- /* IOWR_32DIRECT(BASE_RW_MGR, 0, __RW_MGR_COUNT_REG_0); */
IOWR_32DIRECT(RW_MGR_RUN_SINGLE_GROUP, 0, __RW_MGR_INIT_CKE_0);
/* indicate that memory is stable */
@@ -1717,8 +1711,25 @@ static uint32_t rw_mgr_mem_calibrate_read_test_patterns (uint32_t rank_bgn,
static uint32_t rw_mgr_mem_calibrate_read_test_patterns_all_ranks
(uint32_t group, uint32_t num_tries, t_btfld *bit_chk)
{
- return rw_mgr_mem_calibrate_read_test_patterns (0, group,
- num_tries, bit_chk, 1);
+ if (rw_mgr_mem_calibrate_read_test_patterns(0, group, num_tries, bit_chk, 1)) {
+ return 1;
+ } else {
+ /* case:139851 - if guaranteed read fails, we can retry using
+ * different dqs enable phases. It is possible that with the
+ * initial phase, dqs enable is asserted/deasserted too close
+ * to an dqs edge, truncating the read burst.
+ */
+ uint32_t p;
+ for (p = 0; p <= IO_DQS_EN_PHASE_MAX; p++) {
+ scc_mgr_set_dqs_en_phase_all_ranks (group, p);
+ if (rw_mgr_mem_calibrate_read_test_patterns(0,
+ group, num_tries, bit_chk, 1)) {
+ return 1;
+ }
+ }
+
+ return 0;
+ }
}
/* load up the patterns we are going to use during a read test */
@@ -4260,6 +4271,7 @@ static int socfpga_sdram_calibration(const uint32_t *inst_rom_init, uint32_t ins
param_t my_param;
gbl_t my_gbl;
uint32_t pass;
+ uint32_t i;
param = &my_param;
gbl = &my_gbl;
@@ -4280,6 +4292,16 @@ static int socfpga_sdram_calibration(const uint32_t *inst_rom_init, uint32_t ins
#if USE_DQS_TRACKING
initialize_tracking();
#endif
+
+ /* Enable all ranks, groups */
+ for (i = 0; i < RW_MGR_MEM_NUMBER_OF_RANKS; i++)
+ param->skip_ranks[i] = 0;
+
+ for (i = 0; i < NUM_SHADOW_REGS; ++i)
+ param->skip_shadow_regs[i] = 0;
+
+ param->skip_groups = 0;
+
pr_debug("Preparing to start memory calibration\n");
pr_debug("%s%s %s ranks=%u cs/dimm=%u dq/dqs=%u,%u vg/dqs=%u,%u "
diff --git a/arch/arm/mach-socfpga/include/mach/sequencer.h b/arch/arm/mach-socfpga/include/mach/sequencer.h
index c437106bc2f4..7c9157a25779 100644
--- a/arch/arm/mach-socfpga/include/mach/sequencer.h
+++ b/arch/arm/mach-socfpga/include/mach/sequencer.h
@@ -2,31 +2,32 @@
#define _SEQUENCER_H_
/*
-Copyright (c) 2012, Altera Corporation
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- * Neither the name of Altera Corporation nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
-DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
+ * Copyright Altera Corporation (C) 2012-2014. All rights reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Altera Corporation nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
#define MRS_MIRROR_PING_PONG_ATSO 0
#define DYNAMIC_CALIBRATION_MODE 0
@@ -396,6 +397,48 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#define PHY_DEBUG_DISABLE_GUARANTEED_READ 0x00000010
#define PHY_DEBUG_ENABLE_NON_DESTRUCTIVE_CALIBRATION 0x00000020
+/* Init and Reset delay constants - Only use if defined by sequencer_defines.h,
+ * otherwise, revert to defaults
+ * Default for Tinit = (0+1) * ((202+1) * (2 * 131 + 1) + 1) = 53532 = 200.75us @ 266MHz
+ */
+#ifdef TINIT_CNTR0_VAL
+ #define SEQ_TINIT_CNTR0_VAL TINIT_CNTR0_VAL
+#else
+ #define SEQ_TINIT_CNTR0_VAL 0
+#endif
+
+#ifdef TINIT_CNTR1_VAL
+ #define SEQ_TINIT_CNTR1_VAL TINIT_CNTR1_VAL
+#else
+ #define SEQ_TINIT_CNTR1_VAL 202
+#endif
+
+#ifdef TINIT_CNTR2_VAL
+ #define SEQ_TINIT_CNTR2_VAL TINIT_CNTR2_VAL
+#else
+ #define SEQ_TINIT_CNTR2_VAL 131
+#endif
+
+
+/* Default for Treset = (2+1) * ((252+1) * (2 * 131 + 1) + 1) = 133563 = 500.86us @ 266MHz */
+#ifdef TRESET_CNTR0_VAL
+ #define SEQ_TRESET_CNTR0_VAL TRESET_CNTR0_VAL
+#else
+ #define SEQ_TRESET_CNTR0_VAL 2
+#endif
+
+#ifdef TRESET_CNTR1_VAL
+ #define SEQ_TRESET_CNTR1_VAL TRESET_CNTR1_VAL
+#else
+ #define SEQ_TRESET_CNTR1_VAL 252
+#endif
+
+#ifdef TRESET_CNTR2_VAL
+ #define SEQ_TRESET_CNTR2_VAL TRESET_CNTR2_VAL
+#else
+ #define SEQ_TRESET_CNTR2_VAL 131
+#endif
+
/* Bitfield type changes depending on protocol */
typedef uint32_t t_btfld;
@@ -409,6 +452,9 @@ typedef struct param_type {
t_btfld read_correct_mask_vg;
t_btfld write_correct_mask;
t_btfld write_correct_mask_vg;
+ uint32_t skip_ranks[MAX_RANKS];
+ uint32_t skip_groups;
+ uint32_t skip_shadow_regs[NUM_SHADOW_REGS];
/* set a particular entry to 1 if we need to skip a particular group */
} param_t;
--
2.1.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 4/5] ARM: socfpga: sockit: update handoff files to 14.0
2014-12-05 16:41 [PATCH 0/5] ARM: SoCFPGA: Update files to Quartus 14.0 Steffen Trumtrar
` (2 preceding siblings ...)
2014-12-05 16:41 ` [PATCH 3/5] ARM: socfpga: update sdram calibration to 14.0 Steffen Trumtrar
@ 2014-12-05 16:41 ` Steffen Trumtrar
2014-12-05 16:41 ` [PATCH 5/5] ARM: socfpga: socrates: " Steffen Trumtrar
2014-12-08 7:44 ` [PATCH 0/5] ARM: SoCFPGA: Update files to Quartus 14.0 Sascha Hauer
5 siblings, 0 replies; 7+ messages in thread
From: Steffen Trumtrar @ 2014-12-05 16:41 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
.../boards/terasic-sockit/iocsr_config_cyclone5.c | 31 +++-
arch/arm/boards/terasic-sockit/pinmux_config.c | 29 ++++
arch/arm/boards/terasic-sockit/pll_config.h | 193 +++++++++++----------
arch/arm/boards/terasic-sockit/sdram_config.h | 42 ++++-
arch/arm/boards/terasic-sockit/sequencer_auto.h | 121 +++++++++----
.../boards/terasic-sockit/sequencer_auto_ac_init.c | 29 ++++
.../terasic-sockit/sequencer_auto_inst_init.c | 45 ++++-
arch/arm/boards/terasic-sockit/sequencer_defines.h | 48 ++++-
8 files changed, 398 insertions(+), 140 deletions(-)
diff --git a/arch/arm/boards/terasic-sockit/iocsr_config_cyclone5.c b/arch/arm/boards/terasic-sockit/iocsr_config_cyclone5.c
index 96045d50d68d..642ea4bae1ff 100644
--- a/arch/arm/boards/terasic-sockit/iocsr_config_cyclone5.c
+++ b/arch/arm/boards/terasic-sockit/iocsr_config_cyclone5.c
@@ -1,4 +1,31 @@
-/* This file is generated by Preloader Generator */
+/* GENERATED FILE - DO NOT EDIT */
+/*
+ * Copyright Altera Corporation (C) 2012-2014. All rights reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Altera Corporation nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
#include <mach/scan-manager.h>
@@ -121,7 +148,7 @@ static const unsigned long iocsr_scan_chain2_table[((CONFIG_HPS_IOCSR_SCANCHAIN2
static const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH / 32) + 1)] = {
0x0C420D80,
- 0x882000FF,
+ 0x082000FF,
0x0A804001,
0x07900000,
0x08020000,
diff --git a/arch/arm/boards/terasic-sockit/pinmux_config.c b/arch/arm/boards/terasic-sockit/pinmux_config.c
index 554fbd8fef3b..ad336fcc0f1f 100644
--- a/arch/arm/boards/terasic-sockit/pinmux_config.c
+++ b/arch/arm/boards/terasic-sockit/pinmux_config.c
@@ -1,3 +1,32 @@
+/* GENERATED FILE - DO NOT EDIT */
+/*
+ * Copyright Altera Corporation (C) 2012-2014. All rights reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Altera Corporation nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
#include <common.h>
unsigned long sys_mgr_init_table[] = {
diff --git a/arch/arm/boards/terasic-sockit/pll_config.h b/arch/arm/boards/terasic-sockit/pll_config.h
index 672ce41fb772..27320402360c 100644
--- a/arch/arm/boards/terasic-sockit/pll_config.h
+++ b/arch/arm/boards/terasic-sockit/pll_config.h
@@ -1,98 +1,113 @@
+/* GENERATED FILE - DO NOT EDIT */
+/*
+ * Copyright Altera Corporation (C) 2012-2014. All rights reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Altera Corporation nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
#ifndef _PRELOADER_PLL_CONFIG_H_
#define _PRELOADER_PLL_CONFIG_H_
-/* PLL configuration data */
-/* Main PLL */
-#define CONFIG_HPS_MAINPLLGRP_VCO_DENOM (0)
-#define CONFIG_HPS_MAINPLLGRP_VCO_NUMER (63)
-#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT (0)
-#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT (0)
-#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT (0)
-#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT (3)
-#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT (3)
-#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT (15)
-#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK (1)
-#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK (1)
-#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK (1)
-#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK (1)
-#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK (0)
-#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK (1)
-#define CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK (0)
-/*
- * To tell where is the clock source:
- * 0 = MAINPLL
- * 1 = PERIPHPLL
- */
-#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP (1)
-#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP (1)
+#define CONFIG_HPS_DBCTRL_STAYOSC1 (1)
-/* Peripheral PLL */
-#define CONFIG_HPS_PERPLLGRP_VCO_DENOM (1)
-#define CONFIG_HPS_PERPLLGRP_VCO_NUMER (79)
-/*
- * To tell where is the VCOs source:
- * 0 = EOSC1
- * 1 = EOSC2
- * 2 = F2S
- */
-#define CONFIG_HPS_PERPLLGRP_VCO_PSRC (0)
-#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT (3)
-#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT (3)
-#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT (1)
-#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT (19)
-#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT (4)
-#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT (9)
-#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK (0)
-#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK (0)
-#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK (1)
-#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK (1)
-#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK (6249)
-/*
- * To tell where is the clock source:
- * 0 = F2S_PERIPH_REF_CLK
- * 1 = MAIN_CLK
- * 2 = PERIPH_CLK
- */
-#define CONFIG_HPS_PERPLLGRP_SRC_SDMMC (2)
-#define CONFIG_HPS_PERPLLGRP_SRC_NAND (2)
-#define CONFIG_HPS_PERPLLGRP_SRC_QSPI (1)
+#define CONFIG_HPS_MAINPLLGRP_VCO_DENOM (0)
+#define CONFIG_HPS_MAINPLLGRP_VCO_NUMER (63)
+#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT (0)
+#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT (0)
+#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT (0)
+#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT (3)
+#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT (511)
+#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT (15)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK (1)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK (1)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK (1)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK (1)
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK (0)
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK (1)
+#define CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK (0)
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP (1)
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP (1)
-/* SDRAM PLL */
-#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM (0)
-#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER (31)
-/*
- * To tell where is the VCOs source:
- * 0 = EOSC1
- * 1 = EOSC2
- * 2 = F2S
- */
-#define CONFIG_HPS_SDRPLLGRP_VCO_SSRC (0)
-#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT (1)
-#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE (0)
-#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT (0)
-#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE (0)
-#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT (1)
-#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE (4)
-#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT (5)
-#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE (0)
+#define CONFIG_HPS_PERPLLGRP_VCO_DENOM (0)
+#define CONFIG_HPS_PERPLLGRP_VCO_NUMER (39)
+#define CONFIG_HPS_PERPLLGRP_VCO_PSRC (0)
+#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT (511)
+#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT (3)
+#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT (511)
+#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT (4)
+#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT (4)
+#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT (511)
+#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK (0)
+#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK (0)
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK (4)
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK (4)
+#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK (6249)
+#define CONFIG_HPS_PERPLLGRP_SRC_SDMMC (2)
+#define CONFIG_HPS_PERPLLGRP_SRC_NAND (2)
+#define CONFIG_HPS_PERPLLGRP_SRC_QSPI (1)
+
+#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM (0)
+#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER (31)
+#define CONFIG_HPS_SDRPLLGRP_VCO_SSRC (0)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT (1)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE (0)
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT (0)
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE (0)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT (1)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE (4)
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT (5)
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE (0)
+
+#define CONFIG_HPS_CLK_OSC1_HZ (25000000)
+#define CONFIG_HPS_CLK_OSC2_HZ (25000000)
+#define CONFIG_HPS_CLK_F2S_SDR_REF_HZ (0)
+#define CONFIG_HPS_CLK_F2S_PER_REF_HZ (0)
+#define CONFIG_HPS_CLK_MAINVCO_HZ (1600000000)
+#define CONFIG_HPS_CLK_PERVCO_HZ (1000000000)
+#define CONFIG_HPS_CLK_SDRVCO_HZ (800000000)
+#define CONFIG_HPS_CLK_OSC1_HZ (25000000)
+#define CONFIG_HPS_CLK_OSC2_HZ (25000000)
+#define CONFIG_HPS_CLK_F2S_SDR_REF_HZ (0)
+#define CONFIG_HPS_CLK_F2S_PER_REF_HZ (0)
+#define CONFIG_HPS_CLK_MAINVCO_HZ (1600000000)
+#define CONFIG_HPS_CLK_PERVCO_HZ (1000000000)
+#define CONFIG_HPS_CLK_EMAC0_HZ (1953125)
+#define CONFIG_HPS_CLK_EMAC1_HZ (250000000)
+#define CONFIG_HPS_CLK_USBCLK_HZ (200000000)
+#define CONFIG_HPS_CLK_NAND_HZ (50000000)
+#define CONFIG_HPS_CLK_SDMMC_HZ (200000000)
+#define CONFIG_HPS_CLK_QSPI_HZ (400000000)
+#define CONFIG_HPS_CLK_SPIM_HZ (200000000)
+#define CONFIG_HPS_CLK_CAN0_HZ (12500000)
+#define CONFIG_HPS_CLK_CAN1_HZ (12500000)
+#define CONFIG_HPS_CLK_GPIODB_HZ (32000)
+#define CONFIG_HPS_CLK_L4_MP_HZ (100000000)
+#define CONFIG_HPS_CLK_L4_SP_HZ (100000000)
-/* Info for driver */
-#define CONFIG_HPS_CLK_OSC1_HZ (25000000)
-#define CONFIG_HPS_CLK_MAINVCO_HZ (1600000000)
-#define CONFIG_HPS_CLK_PERVCO_HZ (1000000000)
-#define CONFIG_HPS_CLK_SDRVCO_HZ (600000000)
-#define CONFIG_HPS_CLK_EMAC0_HZ (50000000)
-#define CONFIG_HPS_CLK_EMAC1_HZ (50000000)
-#define CONFIG_HPS_CLK_USBCLK_HZ (200000000)
-#define CONFIG_HPS_CLK_NAND_HZ (100000000)
-#define CONFIG_HPS_CLK_SDMMC_HZ (50000000)
-#define CONFIG_HPS_CLK_QSPI_HZ (400000000)
-#define CONFIG_HPS_CLK_SPIM_HZ (200000000)
-#define CONFIG_HPS_CLK_CAN0_HZ (100000000)
-#define CONFIG_HPS_CLK_CAN1_HZ (100000000)
-#define CONFIG_HPS_CLK_GPIODB_HZ (32000)
-#define CONFIG_HPS_CLK_L4_MP_HZ (100000000)
-#define CONFIG_HPS_CLK_L4_SP_HZ (100000000)
+#define CONFIG_HPS_ALTERAGRP_MPUCLK (1)
+#define CONFIG_HPS_ALTERAGRP_MAINCLK (3)
+#define CONFIG_HPS_ALTERAGRP_DBGATCLK (3)
#endif /* _PRELOADER_PLL_CONFIG_H_ */
diff --git a/arch/arm/boards/terasic-sockit/sdram_config.h b/arch/arm/boards/terasic-sockit/sdram_config.h
index 2c04b0259954..875d5fe0e7e9 100644
--- a/arch/arm/boards/terasic-sockit/sdram_config.h
+++ b/arch/arm/boards/terasic-sockit/sdram_config.h
@@ -1,3 +1,32 @@
+/* GENERATED FILE - DO NOT EDIT */
+/*
+ * Copyright Altera Corporation (C) 2012-2014. All rights reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Altera Corporation nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
#ifndef __SDRAM_CONFIG_H
#define __SDRAM_CONFIG_H
@@ -26,9 +55,10 @@
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC (20)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD (4)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TCCD (4)
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT (200)
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT (512)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT (3)
#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_AUTOPDCYCLES (0)
+#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_CLKDISABLECYCLES (8)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS (10)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS (15)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS (3)
@@ -36,6 +66,7 @@
#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH (32)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH (8)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN (0)
+#define CONFIG_HPS_SDR_CTRLCFG_LOWPWREQ_SELFRFSHMASK (3)
#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL (2)
#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA (0)
#define CONFIG_HPS_SDR_CTRLCFG_CTRLWIDTH_CTRLWIDTH (2)
@@ -61,9 +92,12 @@
#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD2_3_0 (0)
#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_2_THRESHOLD2_35_4 (0x41041041)
#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_3_THRESHOLD2_59_36 (0x410410)
-#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0 (0x01010101)
-#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32 (0x01010101)
-#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64 (0x0101)
+#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0 \
+(0x01010101)
+#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32 \
+(0x01010101)
+#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64 \
+(0x0101)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_READ (0)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_WRITE (1)
#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST_READ_PORT_USED (0x0)
diff --git a/arch/arm/boards/terasic-sockit/sequencer_auto.h b/arch/arm/boards/terasic-sockit/sequencer_auto.h
index 492706f7a326..ac6d28297d40 100644
--- a/arch/arm/boards/terasic-sockit/sequencer_auto.h
+++ b/arch/arm/boards/terasic-sockit/sequencer_auto.h
@@ -1,3 +1,31 @@
+/*
+Copyright (c) 2012, Altera Corporation
+All rights reserved.
+
+SPDX-License-Identifier: BSD-3-Clause
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of Altera Corporation nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
#define __RW_MGR_ac_mrs1 0x04
#define __RW_MGR_ac_mrs3 0x06
#define __RW_MGR_ac_write_bank_0_col_0_nodata_wl_1 0x1C
@@ -71,56 +99,83 @@
#define __RW_MGR_CONTENT_ac_mrs3_mirr 0x100B0000
#define __RW_MGR_CONTENT_ac_mrs2 0x100A0218
-#define __RW_MGR_READ_B2B_WAIT2 0x6A
-#define __RW_MGR_LFSR_WR_RD_BANK_0_WAIT 0x31
+/*
+Copyright (c) 2012, Altera Corporation
+All rights reserved.
+
+SPDX-License-Identifier: BSD-3-Clause
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of Altera Corporation nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+#define __RW_MGR_READ_B2B_WAIT2 0x6B
+#define __RW_MGR_LFSR_WR_RD_BANK_0_WAIT 0x32
#define __RW_MGR_REFRESH_ALL 0x14
#define __RW_MGR_ZQCL 0x06
-#define __RW_MGR_LFSR_WR_RD_BANK_0_NOP 0x22
-#define __RW_MGR_LFSR_WR_RD_BANK_0_DQS 0x23
+#define __RW_MGR_LFSR_WR_RD_BANK_0_NOP 0x23
+#define __RW_MGR_LFSR_WR_RD_BANK_0_DQS 0x24
#define __RW_MGR_ACTIVATE_0_AND_1 0x0D
#define __RW_MGR_MRS2_MIRR 0x0A
-#define __RW_MGR_INIT_RESET_0_CKE_0 0x6E
-#define __RW_MGR_LFSR_WR_RD_DM_BANK_0_WAIT 0x45
+#define __RW_MGR_INIT_RESET_0_CKE_0 0x6F
+#define __RW_MGR_LFSR_WR_RD_DM_BANK_0_WAIT 0x46
#define __RW_MGR_ACTIVATE_1 0x0F
#define __RW_MGR_MRS2 0x04
-#define __RW_MGR_LFSR_WR_RD_DM_BANK_0_WL_1 0x34
+#define __RW_MGR_LFSR_WR_RD_DM_BANK_0_WL_1 0x35
#define __RW_MGR_MRS1 0x03
-#define __RW_MGR_IDLE_LOOP1 0x7C
-#define __RW_MGR_GUARANTEED_WRITE_WAIT2 0x18
+#define __RW_MGR_IDLE_LOOP1 0x7B
+#define __RW_MGR_GUARANTEED_WRITE_WAIT2 0x19
#define __RW_MGR_MRS3 0x05
-#define __RW_MGR_IDLE_LOOP2 0x7B
-#define __RW_MGR_GUARANTEED_WRITE_WAIT1 0x1E
-#define __RW_MGR_LFSR_WR_RD_BANK_0_DATA 0x24
-#define __RW_MGR_GUARANTEED_WRITE_WAIT3 0x1C
-#define __RW_MGR_RDIMM_CMD 0x7A
-#define __RW_MGR_LFSR_WR_RD_DM_BANK_0_NOP 0x36
-#define __RW_MGR_GUARANTEED_WRITE_WAIT0 0x1A
-#define __RW_MGR_LFSR_WR_RD_DM_BANK_0_DATA 0x38
-#define __RW_MGR_GUARANTEED_READ_CONT 0x53
+#define __RW_MGR_IDLE_LOOP2 0x7A
+#define __RW_MGR_GUARANTEED_WRITE_WAIT1 0x1F
+#define __RW_MGR_LFSR_WR_RD_BANK_0_DATA 0x25
+#define __RW_MGR_GUARANTEED_WRITE_WAIT3 0x1D
+#define __RW_MGR_RDIMM_CMD 0x79
+#define __RW_MGR_LFSR_WR_RD_DM_BANK_0_NOP 0x37
+#define __RW_MGR_GUARANTEED_WRITE_WAIT0 0x1B
+#define __RW_MGR_LFSR_WR_RD_DM_BANK_0_DATA 0x39
+#define __RW_MGR_GUARANTEED_READ_CONT 0x54
+#define __RW_MGR_REFRESH_DELAY 0x15
#define __RW_MGR_MRS3_MIRR 0x0B
#define __RW_MGR_IDLE 0x00
-#define __RW_MGR_READ_B2B 0x58
-#define __RW_MGR_INIT_RESET_0_CKE_0_inloop 0x6F
-#define __RW_MGR_LFSR_WR_RD_DM_BANK_0_DQS 0x37
-#define __RW_MGR_GUARANTEED_WRITE 0x17
+#define __RW_MGR_READ_B2B 0x59
+#define __RW_MGR_LFSR_WR_RD_DM_BANK_0_DQS 0x38
+#define __RW_MGR_GUARANTEED_WRITE 0x18
#define __RW_MGR_PRECHARGE_ALL 0x12
-#define __RW_MGR_INIT_RESET_1_CKE_0_inloop_1 0x74
-#define __RW_MGR_SGLE_READ 0x7E
+#define __RW_MGR_SGLE_READ 0x7D
#define __RW_MGR_MRS0_USER_MIRR 0x0C
#define __RW_MGR_RETURN 0x01
-#define __RW_MGR_LFSR_WR_RD_DM_BANK_0 0x35
+#define __RW_MGR_LFSR_WR_RD_DM_BANK_0 0x36
#define __RW_MGR_MRS0_USER 0x07
-#define __RW_MGR_GUARANTEED_READ 0x4B
+#define __RW_MGR_GUARANTEED_READ 0x4C
#define __RW_MGR_MRS0_DLL_RESET_MIRR 0x08
-#define __RW_MGR_INIT_RESET_1_CKE_0 0x73
+#define __RW_MGR_INIT_RESET_1_CKE_0 0x74
#define __RW_MGR_ACTIVATE_0_AND_1_WAIT2 0x10
-#define __RW_MGR_LFSR_WR_RD_BANK_0_WL_1 0x20
+#define __RW_MGR_LFSR_WR_RD_BANK_0_WL_1 0x21
#define __RW_MGR_MRS0_DLL_RESET 0x02
#define __RW_MGR_ACTIVATE_0_AND_1_WAIT1 0x0E
-#define __RW_MGR_LFSR_WR_RD_BANK_0 0x21
-#define __RW_MGR_CLEAR_DQS_ENABLE 0x48
+#define __RW_MGR_LFSR_WR_RD_BANK_0 0x22
+#define __RW_MGR_CLEAR_DQS_ENABLE 0x49
#define __RW_MGR_MRS1_MIRR 0x09
-#define __RW_MGR_READ_B2B_WAIT1 0x60
+#define __RW_MGR_READ_B2B_WAIT1 0x61
#define __RW_MGR_CONTENT_READ_B2B_WAIT2 0x00C680
#define __RW_MGR_CONTENT_LFSR_WR_RD_BANK_0_WAIT 0x00A680
#define __RW_MGR_CONTENT_REFRESH_ALL 0x000980
@@ -147,14 +202,13 @@
#define __RW_MGR_CONTENT_GUARANTEED_WRITE_WAIT0 0x008CE8
#define __RW_MGR_CONTENT_LFSR_WR_RD_DM_BANK_0_DATA 0x030CE0
#define __RW_MGR_CONTENT_GUARANTEED_READ_CONT 0x001168
+#define __RW_MGR_CONTENT_REFRESH_DELAY 0x00A680
#define __RW_MGR_CONTENT_MRS3_MIRR 0x008600
#define __RW_MGR_CONTENT_IDLE 0x080000
#define __RW_MGR_CONTENT_READ_B2B 0x040E88
-#define __RW_MGR_CONTENT_INIT_RESET_0_CKE_0_inloop 0x000000
#define __RW_MGR_CONTENT_LFSR_WR_RD_DM_BANK_0_DQS 0x000C00
#define __RW_MGR_CONTENT_GUARANTEED_WRITE 0x000B68
#define __RW_MGR_CONTENT_PRECHARGE_ALL 0x000900
-#define __RW_MGR_CONTENT_INIT_RESET_1_CKE_0_inloop_1 0x000080
#define __RW_MGR_CONTENT_SGLE_READ 0x040F08
#define __RW_MGR_CONTENT_MRS0_USER_MIRR 0x008400
#define __RW_MGR_CONTENT_RETURN 0x080680
@@ -171,3 +225,4 @@
#define __RW_MGR_CONTENT_CLEAR_DQS_ENABLE 0x001158
#define __RW_MGR_CONTENT_MRS1_MIRR 0x008500
#define __RW_MGR_CONTENT_READ_B2B_WAIT1 0x00A680
+
diff --git a/arch/arm/boards/terasic-sockit/sequencer_auto_ac_init.c b/arch/arm/boards/terasic-sockit/sequencer_auto_ac_init.c
index 5b0c3f351db8..fe0764b0ce15 100644
--- a/arch/arm/boards/terasic-sockit/sequencer_auto_ac_init.c
+++ b/arch/arm/boards/terasic-sockit/sequencer_auto_ac_init.c
@@ -1,3 +1,32 @@
+/*
+Copyright (c) 2012, Altera Corporation
+All rights reserved.
+
+SPDX-License-Identifier: BSD-3-Clause
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of Altera Corporation nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
static const uint32_t ac_rom_init_size = 36;
static const uint32_t ac_rom_init[36] =
{
diff --git a/arch/arm/boards/terasic-sockit/sequencer_auto_inst_init.c b/arch/arm/boards/terasic-sockit/sequencer_auto_inst_init.c
index 7815faa939ee..fc83721ea217 100644
--- a/arch/arm/boards/terasic-sockit/sequencer_auto_inst_init.c
+++ b/arch/arm/boards/terasic-sockit/sequencer_auto_inst_init.c
@@ -1,7 +1,35 @@
-#include <common.h>
+/*
+Copyright (c) 2012, Altera Corporation
+All rights reserved.
+
+SPDX-License-Identifier: BSD-3-Clause
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of Altera Corporation nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
-const uint32_t inst_rom_init_size = 128;
-const uint32_t inst_rom_init[128] =
+#include <common.h>
+const uint32_t inst_rom_init_size = 127;
+const uint32_t inst_rom_init[127] =
{
0x80000,
0x80680,
@@ -24,6 +52,7 @@ const uint32_t inst_rom_init[128] =
0x900,
0x80680,
0x980,
+ 0xa680,
0x8680,
0x80680,
0xb68,
@@ -114,16 +143,14 @@ const uint32_t inst_rom_init[128] =
0xe680,
0x80680,
0x0,
- 0x0,
- 0xa000,
0x8000,
+ 0xa000,
+ 0xc000,
0x80000,
0x80,
- 0x80,
- 0x80,
- 0x80,
- 0xa080,
0x8080,
+ 0xa080,
+ 0xc080,
0x80080,
0x9180,
0x8680,
diff --git a/arch/arm/boards/terasic-sockit/sequencer_defines.h b/arch/arm/boards/terasic-sockit/sequencer_defines.h
index a3cd7a87d7f4..eaa2726db5ff 100644
--- a/arch/arm/boards/terasic-sockit/sequencer_defines.h
+++ b/arch/arm/boards/terasic-sockit/sequencer_defines.h
@@ -1,11 +1,39 @@
+/*
+Copyright (c) 2012, Altera Corporation
+All rights reserved.
+
+SPDX-License-Identifier: BSD-3-Clause
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of Altera Corporation nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
#ifndef _SEQUENCER_DEFINES_H_
#define _SEQUENCER_DEFINES_H_
#define AC_ROM_MR1_MIRR 0000000000110
-#define AC_ROM_MR1_OCD_ENABLE
+#define AC_ROM_MR1_OCD_ENABLE
#define AC_ROM_MR2_MIRR 0001000011000
#define AC_ROM_MR3_MIRR 0000000000000
-#define AC_ROM_MR0_CALIB
+#define AC_ROM_MR0_CALIB
#define AC_ROM_MR0_DLL_RESET_MIRR 0010011101000
#define AC_ROM_MR0_DLL_RESET 0010101110000
#define AC_ROM_MR0_MIRR 0010001101001
@@ -30,6 +58,7 @@
#define DM_PINS_ENABLED 1
#define ENABLE_ASSERT 0
#define ENABLE_BRINGUP_DEBUGGING 0
+#define ENABLE_DELAY_CHAIN_WRITE 0
#define ENABLE_DQS_IN_CENTERING 1
#define ENABLE_DQS_OUT_CENTERING 0
#define ENABLE_EXPORT_SEQ_DEBUG_BRIDGE 0
@@ -38,6 +67,7 @@
#define ENABLE_NON_DESTRUCTIVE_CALIB 0
#define ENABLE_SUPER_QUICK_CALIBRATION 0
#define ENABLE_TCL_DEBUG 0
+#define FAKE_CAL_FAIL 0
#define FULL_RATE 1
#define GUARANTEED_READ_BRINGUP_TEST 0
#define HALF_RATE 0
@@ -69,9 +99,13 @@
#define LPDDR1 0
#define LPDDR2 0
#define LRDIMM 0
+#define M10_DQ_WIDTH_8 0
+#define M10_DQ_WIDTH_16 0
+#define M10_DQ_WIDTH_24 0
#define MARGIN_VARIATION_TEST 0
#define MAX_LATENCY_COUNT_WIDTH 5
#define MEM_ADDR_WIDTH 13
+#define MRS_MIRROR_PING_PONG_ATSO 0
#define MULTIPLE_AFI_WLAT 0
#define NUM_SHADOW_REGS 1
#define QDRII 0
@@ -79,7 +113,7 @@
#define RDIMM 0
#define READ_AFTER_WRITE_CALIBRATION 1
#define READ_VALID_FIFO_SIZE 16
-#define REG_FILE_INIT_SEQ_SIGNATURE 0x55550483
+#define REG_FILE_INIT_SEQ_SIGNATURE 0x5555048c
#define RLDRAM3 0
#define RLDRAMII 0
#define RLDRAMX 0
@@ -110,9 +144,17 @@
#define STATIC_SIM_FILESET 0
#define STATIC_SKIP_MEM_INIT 0
#define STRATIXV 0
+#define TINIT_CNTR1_VAL 32
+#define TINIT_CNTR2_VAL 32
+#define TINIT_CNTR0_VAL 99
#define TRACKING_ERROR_TEST 0
#define TRACKING_WATCH_TEST 0
+#define TRESET_CNTR1_VAL 99
+#define TRESET_CNTR2_VAL 10
+#define TRESET_CNTR0_VAL 99
+#define TW0_CAPTURE_CLOCKS 0
#define USE_DQS_TRACKING 1
#define USE_SHADOW_REGS 0
+#define USE_USER_RDIMM_VALUE 0
#endif /* _SEQUENCER_DEFINES_H_ */
--
2.1.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 5/5] ARM: socfpga: socrates: update handoff files to 14.0
2014-12-05 16:41 [PATCH 0/5] ARM: SoCFPGA: Update files to Quartus 14.0 Steffen Trumtrar
` (3 preceding siblings ...)
2014-12-05 16:41 ` [PATCH 4/5] ARM: socfpga: sockit: update handoff files " Steffen Trumtrar
@ 2014-12-05 16:41 ` Steffen Trumtrar
2014-12-08 7:44 ` [PATCH 0/5] ARM: SoCFPGA: Update files to Quartus 14.0 Sascha Hauer
5 siblings, 0 replies; 7+ messages in thread
From: Steffen Trumtrar @ 2014-12-05 16:41 UTC (permalink / raw)
To: barebox; +Cc: Steffen Trumtrar
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
.../boards/ebv-socrates/iocsr_config_cyclone5.c | 99 +++++++----
arch/arm/boards/ebv-socrates/pinmux_config.c | 33 +++-
arch/arm/boards/ebv-socrates/pll_config.h | 194 +++++++++++----------
arch/arm/boards/ebv-socrates/sdram_config.h | 49 +++++-
4 files changed, 242 insertions(+), 133 deletions(-)
diff --git a/arch/arm/boards/ebv-socrates/iocsr_config_cyclone5.c b/arch/arm/boards/ebv-socrates/iocsr_config_cyclone5.c
index aa02724643e8..002feef2f30c 100644
--- a/arch/arm/boards/ebv-socrates/iocsr_config_cyclone5.c
+++ b/arch/arm/boards/ebv-socrates/iocsr_config_cyclone5.c
@@ -1,4 +1,31 @@
-/* This file is generated by Preloader Generator */
+/* GENERATED FILE - DO NOT EDIT */
+/*
+ * Copyright Altera Corporation (C) 2012-2014. All rights reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Altera Corporation nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
#include <mach/scan-manager.h>
@@ -121,7 +148,7 @@ static const unsigned long iocsr_scan_chain2_table[((CONFIG_HPS_IOCSR_SCANCHAIN2
static const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH / 32) + 1)] = {
0x0CC20D80,
- 0x8C3000FF,
+ 0x0C3000FF,
0x0A804001,
0x07900000,
0x08020000,
@@ -171,17 +198,17 @@ static const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3
0x00001000,
0xA0000034,
0x0D000001,
- 0xA0680514,
- 0xCF034069,
- 0x1E781A03,
- 0x805140D0,
- 0x34069A06,
- 0x01A03CF0,
- 0x340D0000,
- 0x1860680D,
- 0x03CF0340,
+ 0xC0680A28,
+ 0x45034030,
+ 0x12481A01,
+ 0x80A280D0,
+ 0x34030C06,
+ 0x01A01450,
+ 0x280D0000,
+ 0x30C0680A,
+ 0x02490340,
0xD000001A,
- 0x0680D340,
+ 0x0680A280,
0x10040000,
0x00200000,
0x10040000,
@@ -245,17 +272,17 @@ static const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3
0x00001000,
0xA0000034,
0x0D000001,
- 0x60680D34,
- 0xCF034018,
- 0x0E381A03,
- 0x80D340D0,
- 0x34018606,
+ 0xC0680A28,
+ 0x49034030,
+ 0x12481A02,
+ 0x80A280D0,
+ 0x34030C06,
0x01A00040,
- 0x340D0002,
- 0x1860680D,
- 0x03CF0340,
- 0xD01E781A,
- 0x06805140,
+ 0x280D0002,
+ 0x30C0680A,
+ 0x02490340,
+ 0xD00A281A,
+ 0x0680A280,
0x10040000,
0x00200000,
0x10040000,
@@ -316,9 +343,9 @@ static const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3
0x00104120,
0x00000200,
0xAC0D5F80,
- 0xFFFFFFFF,
- 0x14F3690D,
- 0x1A041414,
+ 0x7FFFFFFF,
+ 0x14F36080,
+ 0x1A041404,
0x00D00000,
0x18864000,
0x49247A06,
@@ -327,7 +354,7 @@ static const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3
0x0342E388,
0x821A0000,
0x0000D000,
- 0x028A0680,
+ 0x05140680,
0xD949247A,
0x1EF228A3,
0x88F6D145,
@@ -390,16 +417,16 @@ static const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3
0x00104120,
0x00000200,
0xAC0D5F80,
- 0xFFFFFFFF,
- 0x14F3690D,
- 0x1A041414,
+ 0x7FFFFFFF,
+ 0x14F36080,
+ 0x1A041404,
0x00D00000,
0x18864000,
0x49247A06,
0xF3CF23D5,
0xF4D1451E,
0x034A9248,
- 0x821A00C3,
+ 0x821A038E,
0x0000D000,
0x00000680,
0xD949247A,
@@ -464,9 +491,9 @@ static const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3
0x00104120,
0x00000200,
0xAC0D5F80,
- 0xFFFFFFFF,
- 0x14F3690D,
- 0x1A041414,
+ 0x7FFFFFFF,
+ 0x14F36080,
+ 0x1A041404,
0x00D00000,
0x18864000,
0x49247A06,
@@ -538,9 +565,9 @@ static const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3
0x00104120,
0x00000200,
0xAC0D5F80,
- 0xFFFFFFFF,
- 0x14F1690D,
- 0x1A041414,
+ 0x7FFFFFFF,
+ 0x14F16080,
+ 0x1A041404,
0x00D00000,
0x08864000,
0x49247A02,
diff --git a/arch/arm/boards/ebv-socrates/pinmux_config.c b/arch/arm/boards/ebv-socrates/pinmux_config.c
index e259078410f7..b0d4eae25774 100644
--- a/arch/arm/boards/ebv-socrates/pinmux_config.c
+++ b/arch/arm/boards/ebv-socrates/pinmux_config.c
@@ -1,3 +1,34 @@
+/* GENERATED FILE - DO NOT EDIT */
+/*
+ * Copyright Altera Corporation (C) 2012-2014. All rights reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Altera Corporation nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <common.h>
+
/* pin MUX configuration data */
static unsigned long sys_mgr_init_table[] = {
0, /* EMACIO0 */
@@ -207,4 +238,4 @@ static unsigned long sys_mgr_init_table[] = {
0, /* SPIM1USEFPGA */
0, /* USB0USEFPGA */
0 /* SPIM0USEFPGA */
-};
+};
\ No newline at end of file
diff --git a/arch/arm/boards/ebv-socrates/pll_config.h b/arch/arm/boards/ebv-socrates/pll_config.h
index 7682f6302d0d..33e653c929a9 100644
--- a/arch/arm/boards/ebv-socrates/pll_config.h
+++ b/arch/arm/boards/ebv-socrates/pll_config.h
@@ -1,97 +1,113 @@
+/* GENERATED FILE - DO NOT EDIT */
+/*
+ * Copyright Altera Corporation (C) 2012-2014. All rights reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Altera Corporation nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
#ifndef _PRELOADER_PLL_CONFIG_H_
#define _PRELOADER_PLL_CONFIG_H_
-/* PLL configuration data */
-/* Main PLL */
-#define CONFIG_HPS_MAINPLLGRP_VCO_DENOM (0)
-#define CONFIG_HPS_MAINPLLGRP_VCO_NUMER (63)
-#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT (0)
-#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT (0)
-#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT (0)
-#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT (3)
-#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT (3)
-#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT (15)
-#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK (1)
-#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK (1)
-#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK (1)
-#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK (1)
-#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK (0)
-#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK (1)
-#define CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK (0)
-/*
- * To tell where is the clock source:
- * 0 = MAINPLL
- * 1 = PERIPHPLL
- */
-#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP (1)
-#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP (1)
+#define CONFIG_HPS_DBCTRL_STAYOSC1 (1)
-/* Peripheral PLL */
-#define CONFIG_HPS_PERPLLGRP_VCO_DENOM (1)
-#define CONFIG_HPS_PERPLLGRP_VCO_NUMER (79)
-/*
- * To tell where is the VCOs source:
- * 0 = EOSC1
- * 1 = EOSC2
- * 2 = F2S
- */
-#define CONFIG_HPS_PERPLLGRP_VCO_PSRC (0)
-#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT (3)
-#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT (3)
-#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT (1)
-#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT (19)
-#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT (4)
-#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT (9)
-#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK (0)
-#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK (0)
-#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK (1)
-#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK (1)
-#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK (6249)
-/*
- * To tell where is the clock source:
- * 0 = F2S_PERIPH_REF_CLK
- * 1 = MAIN_CLK
- * 2 = PERIPH_CLK
- */
-#define CONFIG_HPS_PERPLLGRP_SRC_SDMMC (1)
-#define CONFIG_HPS_PERPLLGRP_SRC_NAND (2)
-#define CONFIG_HPS_PERPLLGRP_SRC_QSPI (1)
+#define CONFIG_HPS_MAINPLLGRP_VCO_DENOM (0)
+#define CONFIG_HPS_MAINPLLGRP_VCO_NUMER (63)
+#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT (0)
+#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT (0)
+#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT (0)
+#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT (3)
+#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT (511)
+#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT (15)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK (1)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK (1)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK (1)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK (1)
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK (0)
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK (1)
+#define CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK (0)
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP (1)
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP (1)
-/* SDRAM PLL */
-#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM (2)
-#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER (79)
-/*
- * To tell where is the VCOs source:
- * 0 = EOSC1
- * 1 = EOSC2
- * 2 = F2S
- */
-#define CONFIG_HPS_SDRPLLGRP_VCO_SSRC (0)
-#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT (1)
-#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE (0)
-#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT (0)
-#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE (0)
-#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT (1)
-#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE (4)
-#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT (5)
-#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE (0)
+#define CONFIG_HPS_PERPLLGRP_VCO_DENOM (0)
+#define CONFIG_HPS_PERPLLGRP_VCO_NUMER (39)
+#define CONFIG_HPS_PERPLLGRP_VCO_PSRC (0)
+#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT (511)
+#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT (3)
+#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT (511)
+#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT (4)
+#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT (4)
+#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT (511)
+#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK (0)
+#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK (0)
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK (1)
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK (4)
+#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK (6249)
+#define CONFIG_HPS_PERPLLGRP_SRC_SDMMC (2)
+#define CONFIG_HPS_PERPLLGRP_SRC_NAND (2)
+#define CONFIG_HPS_PERPLLGRP_SRC_QSPI (1)
+
+#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM (2)
+#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER (79)
+#define CONFIG_HPS_SDRPLLGRP_VCO_SSRC (0)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT (1)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE (0)
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT (0)
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE (0)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT (1)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE (4)
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT (5)
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE (0)
+
+#define CONFIG_HPS_CLK_OSC1_HZ (25000000)
+#define CONFIG_HPS_CLK_OSC2_HZ (25000000)
+#define CONFIG_HPS_CLK_F2S_SDR_REF_HZ (0)
+#define CONFIG_HPS_CLK_F2S_PER_REF_HZ (0)
+#define CONFIG_HPS_CLK_MAINVCO_HZ (1600000000)
+#define CONFIG_HPS_CLK_PERVCO_HZ (1000000000)
+#define CONFIG_HPS_CLK_SDRVCO_HZ (666666666)
+#define CONFIG_HPS_CLK_OSC1_HZ (25000000)
+#define CONFIG_HPS_CLK_OSC2_HZ (25000000)
+#define CONFIG_HPS_CLK_F2S_SDR_REF_HZ (0)
+#define CONFIG_HPS_CLK_F2S_PER_REF_HZ (0)
+#define CONFIG_HPS_CLK_MAINVCO_HZ (1600000000)
+#define CONFIG_HPS_CLK_PERVCO_HZ (1000000000)
+#define CONFIG_HPS_CLK_EMAC0_HZ (1953125)
+#define CONFIG_HPS_CLK_EMAC1_HZ (250000000)
+#define CONFIG_HPS_CLK_USBCLK_HZ (200000000)
+#define CONFIG_HPS_CLK_NAND_HZ (50000000)
+#define CONFIG_HPS_CLK_SDMMC_HZ (200000000)
+#define CONFIG_HPS_CLK_QSPI_HZ (400000000)
+#define CONFIG_HPS_CLK_SPIM_HZ (200000000)
+#define CONFIG_HPS_CLK_CAN0_HZ (100000000)
+#define CONFIG_HPS_CLK_CAN1_HZ (12500000)
+#define CONFIG_HPS_CLK_GPIODB_HZ (32000)
+#define CONFIG_HPS_CLK_L4_MP_HZ (100000000)
+#define CONFIG_HPS_CLK_L4_SP_HZ (100000000)
-/* Info for driver */
-#define CONFIG_HPS_CLK_OSC1_HZ (25000000)
-#define CONFIG_HPS_CLK_MAINVCO_HZ (1600000000)
-#define CONFIG_HPS_CLK_PERVCO_HZ (1000000000)
-#define CONFIG_HPS_CLK_SDRVCO_HZ (600000000)
-#define CONFIG_HPS_CLK_EMAC0_HZ (50000000)
-#define CONFIG_HPS_CLK_EMAC1_HZ (50000000)
-#define CONFIG_HPS_CLK_USBCLK_HZ (200000000)
-#define CONFIG_HPS_CLK_NAND_HZ (100000000)
-#define CONFIG_HPS_CLK_SDMMC_HZ (50000000)
-#define CONFIG_HPS_CLK_QSPI_HZ (400000000)
-#define CONFIG_HPS_CLK_SPIM_HZ (200000000)
-#define CONFIG_HPS_CLK_CAN0_HZ (100000000)
-#define CONFIG_HPS_CLK_CAN1_HZ (100000000)
-#define CONFIG_HPS_CLK_GPIODB_HZ (32000)
-#define CONFIG_HPS_CLK_L4_MP_HZ (100000000)
-#define CONFIG_HPS_CLK_L4_SP_HZ (100000000)
+#define CONFIG_HPS_ALTERAGRP_MPUCLK (1)
+#define CONFIG_HPS_ALTERAGRP_MAINCLK (3)
+#define CONFIG_HPS_ALTERAGRP_DBGATCLK (3)
#endif /* _PRELOADER_PLL_CONFIG_H_ */
diff --git a/arch/arm/boards/ebv-socrates/sdram_config.h b/arch/arm/boards/ebv-socrates/sdram_config.h
index 94d1cbe4706e..16dd783bf093 100644
--- a/arch/arm/boards/ebv-socrates/sdram_config.h
+++ b/arch/arm/boards/ebv-socrates/sdram_config.h
@@ -1,3 +1,32 @@
+/* GENERATED FILE - DO NOT EDIT */
+/*
+ * Copyright Altera Corporation (C) 2012-2014. All rights reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Altera Corporation nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
#ifndef __SDRAM_CONFIG_H
#define __SDRAM_CONFIG_H
@@ -26,9 +55,10 @@
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC (17)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD (4)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TCCD (4)
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT (200)
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT (512)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT (3)
#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_AUTOPDCYCLES (0)
+#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_CLKDISABLECYCLES (8)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS (10)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS (15)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS (3)
@@ -36,6 +66,7 @@
#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH (32)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH (8)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN (0)
+#define CONFIG_HPS_SDR_CTRLCFG_LOWPWREQ_SELFRFSHMASK (3)
#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL (2)
#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA (0)
#define CONFIG_HPS_SDR_CTRLCFG_CTRLWIDTH_CTRLWIDTH (2)
@@ -61,13 +92,17 @@
#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD2_3_0 (0)
#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_2_THRESHOLD2_35_4 (0x41041041)
#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_3_THRESHOLD2_59_36 (0x410410)
-#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0 (0x80808080)
-#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32 (0x80808080)
-#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64 (0x8080)
+#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0 \
+(0x01010101)
+#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32 \
+(0x01010101)
+#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64 \
+(0x0101)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_READ (0)
#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_WRITE (1)
-#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST_READ_PORT_USED (0)
-#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST_WRITE_PORT_USED (0)
-#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST_COMMAND_PORT_USED (0)
+#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST_READ_PORT_USED (0x0)
+#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST_WRITE_PORT_USED (0x0)
+#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST_COMMAND_PORT_USED (0x0)
+#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST (0x0)
#endif /*#ifndef__SDRAM_CONFIG_H*/
--
2.1.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 0/5] ARM: SoCFPGA: Update files to Quartus 14.0
2014-12-05 16:41 [PATCH 0/5] ARM: SoCFPGA: Update files to Quartus 14.0 Steffen Trumtrar
` (4 preceding siblings ...)
2014-12-05 16:41 ` [PATCH 5/5] ARM: socfpga: socrates: " Steffen Trumtrar
@ 2014-12-08 7:44 ` Sascha Hauer
5 siblings, 0 replies; 7+ messages in thread
From: Sascha Hauer @ 2014-12-08 7:44 UTC (permalink / raw)
To: Steffen Trumtrar; +Cc: barebox
On Fri, Dec 05, 2014 at 05:41:44PM +0100, Steffen Trumtrar wrote:
> Hi!
>
> This series adds basic documentation for the SoCFPGA architecture in 1/5.
>
> Then all handoff files and the sequencer code is updated to the current
> Quartus II 14.0 versions.
>
> The files are autogeneratd by Quartus, so I went for trying to not fix all
> coding style errors, because I guess these will just keep coming with every
> update. So, I didn't change anything that is not too bad.
>
> Tested on both Socrates and Sockit.
>
> Regards,
> Steffen
>
> Steffen Trumtrar (5):
> Documentation: boards: add socfpga
> ARM: socfpga: move iocsr from mach to board folder
> ARM: socfpga: update sdram calibration to 14.0
> ARM: socfpga: sockit: update handoff files to 14.0
> ARM: socfpga: socrates: update handoff files to 14.0
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2014-12-08 7:45 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-12-05 16:41 [PATCH 0/5] ARM: SoCFPGA: Update files to Quartus 14.0 Steffen Trumtrar
2014-12-05 16:41 ` [PATCH 1/5] Documentation: boards: add socfpga Steffen Trumtrar
2014-12-05 16:41 ` [PATCH 2/5] ARM: socfpga: move iocsr from mach to board folder Steffen Trumtrar
2014-12-05 16:41 ` [PATCH 3/5] ARM: socfpga: update sdram calibration to 14.0 Steffen Trumtrar
2014-12-05 16:41 ` [PATCH 4/5] ARM: socfpga: sockit: update handoff files " Steffen Trumtrar
2014-12-05 16:41 ` [PATCH 5/5] ARM: socfpga: socrates: " Steffen Trumtrar
2014-12-08 7:44 ` [PATCH 0/5] ARM: SoCFPGA: Update files to Quartus 14.0 Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox