[PATCH 1/3] arm: include relevant headers in barebox-arm

[PATCH 1/3] arm: include relevant headers in barebox-arm

[Lucas Stach]

Provide the necessary types and defines used in this header.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm/include/asm/barebox-arm.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/include/asm/barebox-arm.h b/arch/arm/include/asm/barebox-arm.h
index 66f6fe5ef6b4..641c00f81848 100644
--- a/arch/arm/include/asm/barebox-arm.h
+++ b/arch/arm/include/asm/barebox-arm.h
@@ -27,6 +27,8 @@
 
 #include <sizes.h>
 #include <asm-generic/memory_layout.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
 
 /* cpu/.../cpu.c */
 int	cleanup_before_linux(void);
-- 
2.1.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 2/3] arm: edmqmx6: build entry in lwl target

[Lucas Stach]

Only build it at the correct obj or pbl stage where
the entry is needed.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm/boards/datamodul-edm-qmx6/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boards/datamodul-edm-qmx6/Makefile b/arch/arm/boards/datamodul-edm-qmx6/Makefile
index bb6d9d848d4f..01c7a259e9a5 100644
--- a/arch/arm/boards/datamodul-edm-qmx6/Makefile
+++ b/arch/arm/boards/datamodul-edm-qmx6/Makefile
@@ -1,2 +1,2 @@
-obj-y += board.o lowlevel.o
-pbl-y += lowlevel.o
+obj-y += board.o
+lwl-y += lowlevel.o
-- 
2.1.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 3/3] arm: do section garbage collection also with modules enabled

[Lucas Stach]

A lot of the arm build (especially PBL stuff) depends on section
garbage collection to be enabled. If it is disabled a lot of targets fail
to link properly. If module support is enabled garbage collection was
disabled on the premise that we throw away too many function which may be
needed in later modules.

The proper way to keep the functions around for use in modules, which
already works, is to annotate them with EXPORT_SYMBOL.

As module support is still marked as experimental I think it's reasonable
to expect users to make sure all symbols that are used by their modules
are properly annotated.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm/Makefile | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index cf81c9c08332..193f731e9039 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -105,11 +105,9 @@ TEXT_BASE = $(CONFIG_TEXT_BASE)
 
 CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
 
-ifndef CONFIG_MODULES
 # Add cleanup flags
 CPPFLAGS += -fdata-sections -ffunction-sections
 LDFLAGS_barebox += -static --gc-sections
-endif
 
 ifdef CONFIG_RELOCATABLE
 LDFLAGS_barebox += -pie
-- 
2.1.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 1/3] arm: include relevant headers in barebox-arm

[Sascha Hauer]

On Wed, Dec 17, 2014 at 11:58:19AM +0100, Lucas Stach wrote:
> Provide the necessary types and defines used in this header.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  arch/arm/include/asm/barebox-arm.h | 2 ++
>  1 file changed, 2 insertions(+)

Applied all, thanks

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox