mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* Modifying Barebox variables from Linux
@ 2015-02-02 21:20 Boulais, Marc-Andre
  2015-02-03  7:38 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Boulais, Marc-Andre @ 2015-02-02 21:20 UTC (permalink / raw)
  To: barebox

Hi,
I am working on an Phytec Phycore-OMAP4460 platform with a Linux BSP (provided by Phytec) which uses Barebox 2013.1.0 to boot the OMAP4. Our application previously ran in a Linux system where U-Boot was used. We could change U-boot variables from the Linux command line as follows:

fw_setenv bootargs 'mem=512M console=ttyS0,115200n8 noinitrd root=/dev/mtdblock4 ro rootfstype=yaffs2'

How would I go doing the same with Barebox ? Is bareboxenv-target part of the solution ? 

Many thanks,

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2015-02-03  7:39 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-02-02 21:20 Modifying Barebox variables from Linux Boulais, Marc-Andre
2015-02-03  7:38 ` Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox