From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1YJJUh-0006f5-AS for barebox@lists.infradead.org; Thu, 05 Feb 2015 10:17:08 +0000 Date: Thu, 5 Feb 2015 11:16:45 +0100 From: Sascha Hauer Message-ID: <20150205101645.GB12209@pengutronix.de> References: <29A2697B0516A946B1023D5E798DFCF67BAB6E85@mail-ying> <20150203201134.GQ12209@pengutronix.de> <29A2697B0516A946B1023D5E798DFCF67BAB6F45@mail-ying> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <29A2697B0516A946B1023D5E798DFCF67BAB6F45@mail-ying> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: saveenv & erase with bad blocks present To: "Boulais, Marc-Andre" Cc: "barebox@lists.infradead.org" Hi Marc-Andre, I found some bugs preventing your OMAP board from working correctly. I just sent some mtd patches to the list. Could you apply them and retest? If your board complains about bad blocks that weren't there last time that could be because of bugs in the Nand driver. In this case you should do a "nand0.erasebad=1" and erase /dev/nand0.barebox again. Since your flashed version does not work with the Nand correctly you should start the fixed version over network. Do you know how to do that? If you need further help please let me know. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox