From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1YKich-00026x-I3 for barebox@lists.infradead.org; Mon, 09 Feb 2015 07:19:12 +0000 Date: Mon, 9 Feb 2015 08:18:49 +0100 From: Sascha Hauer Message-ID: <20150209071849.GR12209@pengutronix.de> References: <29A2697B0516A946B1023D5E798DFCF67BAB6E85@mail-ying> <20150203201134.GQ12209@pengutronix.de> <29A2697B0516A946B1023D5E798DFCF67BAB6F45@mail-ying> <20150205101645.GB12209@pengutronix.de> <29A2697B0516A946B1023D5E798DFCF67BAB71AD@mail-ying> <20150205212335.GF12209@pengutronix.de> <29A2697B0516A946B1023D5E798DFCF67BAB72A5@mail-ying> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <29A2697B0516A946B1023D5E798DFCF67BAB72A5@mail-ying> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: saveenv & erase with bad blocks present To: "Boulais, Marc-Andre" Cc: "barebox@lists.infradead.org" On Fri, Feb 06, 2015 at 05:03:59PM +0000, Boulais, Marc-Andre wrote: > Ok, I did erase the nand0.bareboxenv partition and after a reset, partition size for the env looks good: > barebox@Phytec phyCORE-OMAP4460:/ ls /dev/nand0.bareboxenv* -l > crw------- 131072 /dev/nand0.bareboxenv.bb > crw------- 131072 /dev/nand0.bareboxenv > barebox@Phytec phyCORE-OMAP4460:/ loadenv -d -s > loading environment from defaultenv > barebox@Phytec phyCORE-OMAP4460:/ saveenv > saving environment > > So I can now save the environment without errors. But if I edit the config file and then do "saveenv" and then I reset, my changes are not there anymore as if the saveenv didn't work. > > Furthermore, I have this message " wrong crc on env superblock" that appears in the boot output... > What do you think ? I'll try to reproduce that tomorrow. Just to be sure: You applied the patches I posted to the list in the meantime. Is the barebox version flashed on your board the version with the patches applied or did you only start the fixed version second stage? Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox